Hello all,
In smart phones such as nokia when I call a person and that person is already in call with somebody else a message appear on the screen with word "waiting" with beep sound notifying that I am in waiting status for that person.
I would like to ask if anybody knows about how it is possible to activate that feature in HTC P3600 either by software or upgrade?
isoprem said:
Hello all,
In smart phones such as nokia when I call a person and that person is already in call with somebody else a message appear on the screen with word "waiting" with beep sound notifying that I am in waiting status for that person.
I would like to ask if anybody knows about how it is possible to activate that feature in HTC P3600 either by software or upgrade?
Click to expand...
Click to collapse
Get your phone dialler showing and go to menu>options>services, tap on call waiting then tap on get settings. After it gets the settings it will come up with 'Phone: Call Waiting' screen, make sure that the 'Notify me' is tapped press ok and thats it!
boz said:
Get your phone dialler showing and go to menu>options>services, tap on call waiting then tap on get settings. After it gets the settings it will come up with 'Phone: Call Waiting' screen, make sure that the 'Notify me' is tapped press ok and thats it!
Click to expand...
Click to collapse
Thanks boz but this is not what I mean, this feature I already activated it.
Now assume that I am person "A" and there are person "B" and "C", what you told is a notification will appear if I am already in call with "B" and "C" call me, a sound will come up in my device telling that "C" is on another line.
What I need in if "B" is already in call with "C" and I "A" call "B", a sound should come up in my device telling that I am "A" is in waiting status for "B" (B is on call and A is waiting).
It is a little bit confusing but I need that feature to be activated.
Thanks a lot.
It is not possible as far as I know and I am not aware of any third party software that can do this, sorry.
isoprem said:
Thanks boz but this is not what I mean, this feature I already activated it.
Now assume that I am person "A" and there are person "B" and "C", what you told is a notification will appear if I am already in call with "B" and "C" call me, a sound will come up in my device telling that "C" is on another line.
What I need in if "B" is already in call with "C" and I "A" call "B", a sound should come up in my device telling that I am "A" is in waiting status for "B" (B is on call and A is waiting).
It is a little bit confusing but I need that feature to be activated.
Thanks a lot.
Click to expand...
Click to collapse
i am also looking for a solution for this issue cos its the same in the blue angel and universal, i was told by someone there is a software for this but he did not know what the name was (he had moved to the iphone and forgotten all about windows), so i am positive there is a solution for this but havnt been able to make myself clear enuf to ask anyone
Related
people have been ringing me but i have yet to work out how to set my xda2 up so that I can see any missed calls. I have tried the start/settings/phone/other settings/notifications and set it to play a sound and display a message on the screen. however this doesnt seem to work!?
Any advice as to how to do this? Also, i find the generic phone software a bit crap and buggy (crashes alot)...any reccs for better phone software?
many thanks...
i've had the same problem, come on people help us =/
when i miss a call i get an icon in the top showing a phone and a !
when i press it it show how many calles i mis'd and i can view which nr or contact it was from
I am running the iMate JasJam 1.31 ROM (which came with the Australian Telstra branded device)
The most common problems so far:
-Sound stops working, will only vibrate. This happen if you switch to silent mode, when you get back to normal sound mode, it stays in silence mode until you reboot. this doesn't always happen. can't reproduce it consistently
-BT turns off by itself once in a while, you have to turn BT on in comm manager
-The most annoying: If you have a data session active (not transfering any data) and a BT connection active (like headset, GPS), then you can't receive a call. The person calling you won't even get to voicemail. it just hangs up on them. if you disconnect the data session or turn off BT then you can receive calls again
-Switching username in MSN will often make messenger crash, you have to kill the process and start it again
-Sometimes will hang for no reason: you need to press the reset button
Then you have the GUI weirdness which make you think: what did they drink the day they designed this software?
Like if you receive a SMS, it will show you an extract of it at the bottom of the screen, you'll get off the following choice:
-Reply on the left soft menu
-More on the right soft menu with the option (delete, call sender, Save as Read, dismiss)
What if I just want to read the full content in the Messaging application? you can't.
If you select Mark as Read immediately it doesn't mark the SMS as read in the messaging application and you still get the notification in the top screen. You have to do "Mark as Read" twice.
Something I miss from my symbian phone, if you have a bluetooth headset paired with a unit (or your car kit) when you answer a call using the BT headset button, the call goes to the BT headset, but if you answer using the device itself, it doesn't go on the BT. This is great if you want to take a personal call in a car for example, and don't want your passenger to hear what's going on.
On WM5, you can't control that. it aways goes to BT if the headset/handsfree is set.
When the keyboard is open, if you tap on a text field, the screen keyboard will show up (and text half of the screen). Why show a software keyboard all the time when you have a full qwerty keyboard available !? Sometimes the keyboard doesn't show up, but I'm yet to understand the logic behind it. it's not consistent
And then of course you have some inconsistencies here and there, like the device will stop working as it did 2 minutes prior. You try it again: bank it works.
I wonder if Microsoft or HTC have any QA !
What other issues have you guys noticed? Or could this be that those problems are unique to thie version of the ROM...
Jean-Yves
I agree, there are quite a lot of interface issues, although I think most of these lie with wm5 as opposed to the unit itself.
here are some of my thoughts:
1) the sms bubble relly annoys me too. why can't I tap the bubble to open the message in full?! often the message is too long to fit in the notification. i'm pretty sure this is a wm5 design fault.
2) the software keyboard bugged me senseless until I realised that if you just keep typing on the 'proper' keyboard it disappears. I used to continually spend the time closing it!
3) the alarms in wm5 are pretty lame. if your phone is on silent they won't sound. you only get a warning if you set an alarm whilst the phone is in vibrate mode. the alarm should simply override the sound settings.
4) contacts - I think searching for contacts is poorly handled which makes one handed operation pretty difficult. it takes too many clicks to select a category to filter by and the display when someone is calling you is a farse! you get a tiny notification with tiny writing! I bought photo contacts pro to help with this and whilt it has its flaws I reckon it is worth it.
having said this, i'm loving my tytn. it is way better than my previous smartphone (nokia 6680). the symbian s60 based phones seem to just be half-assed to me.
cheers
Just to comment on the SMS notification.
I am on MDA Vario II from T-Mobile, and when I get an SMS my left button says read! so If I choose that he whole message is displayed. So I guess it is not the OS but the Operator or manufacturer who screwed up on this one.
I add that in some case the tytn wirless modem function dont work.
So you can use the tytn like modem.
festermania said:
I add that in some case the tytn wirless modem function dont work.
So you can use the tytn like modem.
Click to expand...
Click to collapse
Exactly. Some units work as modem and others not (mine not)
Mine works, but since Vista RC2, I couldn't get the OS to install the drivers.
It worked well in Beta2 and RC1
Ken
danielherrero said:
Exactly. Some units work as modem and others not (mine not)
Click to expand...
Click to collapse
Churchill said:
Just to comment on the SMS notification.
I am on MDA Vario II from T-Mobile, and when I get an SMS my left button says read! so If I choose that he whole message is displayed. So I guess it is not the OS but the Operator or manufacturer who screwed up on this one.
Click to expand...
Click to collapse
well that's quite bugging! i'm also on t-mobile vario ii and mine appears with reply in the bottom left!!
Ha! my OS is in Dutch, so I am not sure it is comparable.
Mine aslso works as a modem just Fine.
I als want to post a small tip. The Envelope (messaging) hardware button on the MDA VARIO II (maybe the same on Vario as well) If you keep on pressing it it sycleds the Outlook Mail, Text messages, Hotmail, MMS accounts. Really nice since you do onot need to hit the menu button...
Cycling Mail
Churchill said:
Mine aslso works as a modem just Fine.
I als want to post a small tip. The Envelope (messaging) hardware button on the MDA VARIO II (maybe the same on Vario as well) If you keep on pressing it it sycleds the Outlook Mail, Text messages, Hotmail, MMS accounts. Really nice since you do onot need to hit the menu button...
Click to expand...
Click to collapse
Churchill
Thanks for the tip, never spotted that before works on HTC TyTn.
Mike
mikechannon said:
Churchill
Thanks for the tip, never spotted that before works on HTC TyTn.
Mike
Click to expand...
Click to collapse
Pressing left/Right on the d-pad does this too.
Cheers
yannyb said:
Pressing left/Right on the d-pad does this too.
Click to expand...
Click to collapse
Yannyb
Thanks for that one too. Perhaps we need a thread for non-obvious key combinations or single presses. Perhaps what seems to be statin' the bleedin' obvious to some folks are just things that others have never thought of or tried. Often I discover things through pure chance. Another useful one I used to need a lot was the D-Pad and messaging key combo to go straight to screen alignment.
Mike
What about a new wiki page for all key combinations of the Hermes?
yannyb said:
well that's quite bugging! i'm also on t-mobile vario ii and mine appears with reply in the bottom left!!
Click to expand...
Click to collapse
Im on T-Mobile too, and for me it depends on the length of the message ive received. If its a message that doesnt entirely fit in the "preview" popup box at the bottom it will give me a "View" option which will open the full message up in Messaging, otherwise it gives a "Reply" option as i have read the whole message anyway...
More to the list
While waiting to get my new phone (used to have PDA2k, and Jamin that I just sold after using for 3 months due to my disatisfactionof performance, sound quality, etc...) I had some chances to play the JasJam (Arabic ROM). First I noted that the call button is very badley placed at the verry bottom of the front as I felt the phone will fall out of my hand (unlike the HTC where the green botton is separatly on the very left side, as I see it in photos).
Second, if pull the out memory card for any reason and push it bacj in, the phone never recognizes the card again unless you soft rest it.
I hope that this issue will be resloved in the next ROM update by imate
Here it is:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Buttons
thanks didn't know about the cycle mail one
darky said:
thanks didn't know about the cycle mail one
Click to expand...
Click to collapse
Yes, I too only discover the mail button could make you cycle between accounts. And this is not in the manual...
Another thing bugging me (I will pass on all the bugs and how to lock the device: there're just too many ways)...
There are 3 OK buttons, all doing the exact same thing. And the scroll wheel just just the same thing as the direction keypad.
If you want to read an email this is extremely annoying as you can't easily read it without tapping the screen to jump to the next screen page ; as up/down or the wheel will jump from embedded number to number.
It would be great if you could differentiate the wheel from the up/down, and if the OK buttons could be assigned another function. Right now there are a few buttons you can't assign.
Ok, this should be a rule to post here: list/describe one bug ...
With activesync program running, try changing the name of the PDA. Will make the device unresponsive for a few minutes.
My experience thus far..
Been using my T-mobile Vario 2 (ROM 1.21.110.3) for a couple of weeks now and have had a couple of problems:
1) The buttons don't work all the time. I've noted this when trying to pick up a call or dismiss a notification of something. I had thought I might have left the device locked but this isn't the case. It's a bit annoying that this only happens sometimes though.
2) About 50% of the time when I call comeone they can't hear me although I can hear them fine.
That's all I've discovered so far, but it's handy to note the comments about the pressing of the envelope button.
Given the problems I've experienced so far are generally located in the lower part of the phone, I'm beginning to suspect the phone has some sort of hardware fault so I've called the shop up and am going to swap it for a new one. Has anyone else experienced these issues?
richieboy said:
Im on T-Mobile too, and for me it depends on the length of the message ive received. If its a message that doesnt entirely fit in the "preview" popup box at the bottom it will give me a "View" option which will open the full message up in Messaging, otherwise it gives a "Reply" option as i have read the whole message anyway...
Click to expand...
Click to collapse
You are absolutely right there. Noticed it today. long message you get a view and if it fits the popup then you get a reply. This is actually quite clever.
Hi Guys
Another basic question here. I can see how I can set the phone to ring, how to set it to vibrate, and how to make it be totally silent. My question is, can you make the phone ring AND vibrate for an incoming call? When I select ring in the control panel, it makes the vibrate option vanish. Please tell me this is possible!
Regards,
Andrew
In Settings/Personal/Sounds & Notifications you hit the notifications tab at the bottom.
Under 'Event', choose "Phone: Incoming call"
Under 'Type', choose "Vibrate and ring" or "Vibrate then ring"
You can also do all this in Settings/Personal/Phone.. first tab..
I reccomend exploring your phone before asking something like this. I'm not trying to be mean or anything, but you could have found this extreamly easily just by looking at all the options you can choose from in the settings window/list.
Thank you very much v1rone. Don't worry, no offense taken.
I have been looking for this feature for a while now and didn't post as a first resort. This phone is just so different from my last one (SE P990) that it's taking me a while to get to grips with it. I had seen that screen before, but for some reason, I didn't notice that middle drop down and saw vibrate as a tick box for all the other things in the top drop down so I assumed it wasn't possible for phone calls.
Anyway, it's all sorted now, thank you very much for your guidance.
BTW, when clicking on the "notifications" tab at the bottom, it takes ages for the tab to come up. This has only been since I upgraded to the new R2 firmware. On the older R1 firmware, it still took a while, but not nearly as long as it does now. Just thought I'd mention it.
Yeah, mine does the same thing when trying to get into that tab. Not sure what the deal is there.
I haven't flashed any of the new R2 roms yet. It's possible that the R2 versions have more files in the windows folder, causing this application to take longer when seeking out all the settings it needs to display it's window. Not sure..
I have absolutely zero evidence to backup this statement seeing that I haven't peeked into the updated rom files yet, but who knows
Sounds plausible
on another note, any way to make the X1i ring and vibrate in a sane manner . . . the vibration is sort of insane lol
anyone know of any app/program to control this?
thanks
mobilemodman said:
on another note, any way to make the X1i ring and vibrate in a sane manner . . . the vibration is sort of insane lol
anyone know of any app/program to control this?
Click to expand...
Click to collapse
Try VAlert, cab should be somewhere on these forums.
When I get a call come through if i cant answer it, how do i put the caller through to voicemail?
I know i used to be able to do this on my old phone by pressing the call end button.
This does not seem to work on the HD2...very annoying
Any ideas guys?
doesn't it give you the option on the screen?
swipe left to answer, swipe right to reject
volume toggle
Try the user manual, all kinds of basic stuff,& tech stuff too,.. On mine the volume button can reject,& be set to send text saying your busy,& will call back...
lol it shows on the screen when someone is calling.
the slider is in the middle.
left side is green 'answer'
right side is red 'reject'
you slide to whichever side you want to do.
Ah, i worked out what it was....
I had that slide to lock thing on my phone (SU2 i think)
What it was doing was not giving me the option to slide the bar the other way to reject a call.
I have removed it fom my phone and im now able to reject a call or send a text now.
thanks for the help guys
Does not the red hardware button do the same (the one used to turn phone off) ?
marlon32 said:
Ah, i worked out what it was....
I had that slide to lock thing on my phone (SU2 i think)
What it was doing was not giving me the option to slide the bar the other way to reject a call.
I have removed it fom my phone and im now able to reject a call or send a text now.
thanks for the help guys
Click to expand...
Click to collapse
you don't really need to uninstall S2U2 for that... I was confused by it at first, as well, but then all you need to do is to disable everything under Settings\Phone (Actually, you get to disable "show caller id" and then everything else is immediately greyed out)
ephestione said:
you don't really need to uninstall S2U2 for that... I was confused by it at first, as well, but then all you need to do is to disable everything under Settings\Phone (Actually, you get to disable "show caller id" and then everything else is immediately greyed out)
Click to expand...
Click to collapse
ok, thanks for that, i may reinstall then.
i never really used S2U2 that much anyway.
thanks though
Like the your new G4 but can't stand that every time someone calls you, there is a full screen, in your face caller id screen? What if you are busy in an app? Tough. You just have to answer the call or ignore it.
Well, that can all be changed. Remember back in KK there was a much smaller caller id that popped up and you could answer the call, decline the call, decline with a message or ... swipe that screen out of your way! Well, you can have that back again and you don't need anything special. Just tap your dialer app. Once there, make sure you are on the 'Dial' or 'Recent' tabs. Hit the 3 buttons in the top right corner, select "Call settings" and then towards the bottom of that menu there is an option called "Incoming voice call pop-up" which is unchecked by default. Just tap the box to add the check mark and back out of there. (Side note. Scroll farther down in these settings and you will find the Gestures that are missing from the phones settings screen. Flip to silence and bring the phone to your ear to answer are hidden away in here.) Now when you get a call and you are in an app or game, instead of the full screen, in your face, can't move the sombitch, window, there is a much smaller pop up that we all love and remember from KK. When you get a call, you can answer, decline with a message, or just decline. But there is also the beloved swipe that thing outta my face before (insert anecdote here) happens, in which case the ringer will be silenced and the pop up will just slide out of your view.
Hope this helps alleviate some of the frustration with your new phone until we can get root and REALLY change the way things happen on our phones.
(BTW. I make no guarantee that your variant has the option described above. But I'm fairly positive that the option will be there.)
You can access the Call Settings directly from the Settings Menu, too (at least on the unlocked variant of the G4). Just go to Settings ยป Calls.
Sent from my LG-H815
Unfortunately doesn't look like it's in the Sprint variant.
Sent from my LGLS991 using XDA Premium HD app
Oh nice find. This was on the G2... then disappeared. I don't know why it is always turned off by default. It is a really nice feature.
I am using Verizon btw
When I first got my G4 it asked me to tap it to my old phone to transfer settings, so this setting must have transferred from my G2 to the G4 automatically.