Can the screen go any dimmer besides the backlight control?
Acer C500 is too bright, my eyes hurt badly.
I too have wished to be able to dim the screen on my x51v more than the brightness control does. That way I can conserve battery power.
Related
Hi guys
Which preference do you use? Is automatic brightness option best for battery saving?
i remember it was an official battery saving tip for iPhone and wondered if it's the case for N1.
eh, just keep it on the lowest brightness... thats the best bet
the problem with auto-brightness is that it fluctuates a bit too much if you're in a room with localised lights and shadows... even in a seemingly bright area to your eyes, the display will go to lowest brightness... i just found it personally annoying, as it would usually fluctuate when i wasn't expecting, and to a lower brightness than i could stand... i've since stopped using it... i set my brightness manually to about 25%... for me that's a good balance between a usuable brightness for all conditions, while still giving good battery life...
I use auto brightness with locale which toggles it on and off based on my location. But even before I did that I really didn't notice to much of a difference in battery levels at the end of the day.
I just wish there were min and max settings for auto brightness. Cause I am pretty sure I have never needed the brightness turned all the way up.
i prefer auto brightness if it works. my 1st N1 had a glitch where the screen brightness used to flicker. on my 2nd N1 the auto brightness does not adjust on full scale........(if you go into 100% dark room, the brightness setting must automatically drop to 0)
I too found that the auto-brightness flickered too much. I downloaded Brightness Level off the marketplace and never looked back...
Auto-brightness fluctuates too much for my liking. So, I just keep it set to middle brightness.
the light sensor is unstable, so manually 25% all the time..
Auto brightness too dark
In my Nexus autobrightness works ok outdoors, but indoors it sets the light too dark. I wish it`d work fine because it's a waste of time adjusting it manually every time you move into different light conditions.
I've read Nexus users report different behaviours of their light sensors, maybe it is a bad quality component of the phone. Is there an app which can modify the sensibility of the light sensor? Would be great to adjust this sensibility and set brightness always to auto with a little more brightness indoors in my case.
manual, 25% - the best balance of battery and light for me.
i use about 60%. I hated the automatic brightness because it was darker than I would like most of the time.
My position is, I bought a phone that has a high resolution, so why not give it the brightness to make the color "pop" like they should.
I noticed that the brightness only brightens but never dims back in automatic brightness display setting. I can reproduce this easy with turning the lamp on my desk on and off. It only goes back to the lower brightness if turning the screen off and on again.
Noticed this too but seems to only occur when I use a widget to toggle between Auto and 100%.
If I leave the setting in Auto from within settings then it seems to work. Brightness widgets seem to break the auto functionality.
Hmm, I don't use a brightness widget. The light of the softbuttons go on if I cover the light sensor, but the screens stays in high brightness.
Strahlenkanone said:
Hmm, I don't use a brightness widget. The light of the softbuttons go on if I cover the light sensor, but the screens stays in high brightness.
Click to expand...
Click to collapse
Must be an all around bug then. If you turn the Atrix off and back on then the auto brightness functionality is restored.
Strahlenkanone said:
I noticed that the brightness only brightens but never dims back in automatic brightness display setting. I can reproduce this easy with turning the lamp on my desk on and off. It only goes back to the lower brightness if turning the screen off and on again.
Click to expand...
Click to collapse
This must be an Android thing. My Atrix does the same thing, as did the Nexus One I had before. I've had several (high end) Nokia's that dimmed/brightened perfectly. After 5 seconds, they would brighten (or dim) accordingly. I was hoping Motorola was better at making phones than HTC (the KING of bad battery life). We ALL lose here. Our precious battery life is being drained by the poor execution of a simple function.
This is a stock android thing (problem). Custom ROMs can allow it to dim and change brightness smoothly rather than in discrete steps (Cyanogen).
That's what I thought. I found this free app called "esdimmer". It supposed to be for Galaxy phones, but it's somewhat working on my Atrix. Does this function work any better in Gingerbread?
Sent from my MB860 using XDA App
Well it's good to hear that it's a stock android problem and not the actual phone. I did find a way to get around this problem but it's very limited. You can get the screen to dim by first putting the phone into standby and then press the standby button once again (which gets you into the lock screen). You'll notice that the screen then dims (if coming from a well lit area/room to a darker one).
Hi peoples
Does anybody know of a way of reducing the backlight brightness below the stock settings?
I've tried various screen filters, such haxor Screen Filter, but these apps are rubbish IMO. All they do is apply a grey transparency filter over the screen, they don't actually reduce the backlight brightness The result is a trick, the screen looks darker but it's really only because the white pixels are made grey. The problem with this approach is that it messes up the contrast and colors, and gives a washed out look.
I like to sometimes use my N10 in a pitch black room, which needs a very dark screen. My old Galaxy Tab 8.9 was good for this, because the backlight was able to go much darker than the N10. The thing is, I know the N10 hardware is capable of having a darker backlight because if you don't touch the tablet for a few minutes, the screen first goes dim before it turns off.
I would like to be able to manually activate the very dim screen setting, or better still, have a lower brightness range available in the brightness settings.
RootDim
mag13 said:
RootDim
Click to expand...
Click to collapse
Thanks - works a charm!
Is it possible to control the brightness of the always on screen separately?
I just noticed that the physical screen can lower it's brightness less than the minimum before the screen turn off, is there any way to keep it that dim?
Get the app called lux