So I perfect my GUI, its slick - nice fat icons for my chubby little fingers - Slide to unlock software, class! and a lovley contact scroller and MP3 scroller for easy music access...
and then, I'm in the workshop and I put a screw in my pocket - bend down to pick up something and "click", I have a brand new hole in my Touchscreen of my SPV M3100 (Heremes).
The LCD is grand - So I assume its just the membrane that was peirced and now it doesnt work, I hate using the hard buttons, and alas, im insurance free...
anyone have any idea where I can buy a replacement? in the UK prefereably - I dont want to send the phone away, as I could do it myself...
any leads would be grand - thanks
JJ McG
I bought an lcd/digitizer combo from a seller on eBay here in the states for $80 US....my digitizer was cracked but it looked easier to install as one unit (you'll see why) so I did that.
Check eBay, and keep on it. Took me about 2 weeks to find a local auction - but there were definately more on your side of the pond.
Sorry to be off topic but what contact and mp3 scroller are you using.
its called icontact - search for it on ppcwarez.org
the mp3 one is in their somewhere too..
works like Iphone,
nu screen anyone!?
Touch screen
I bought an LCD screen from this guy once, very fast service, no problem
www.cnn.cn
cheers
imteresting to see they have a gps antana for a hermies aswell, wonder if it works?
zbee said:
imteresting to see they have a gps antana for a hermies aswell, wonder if it works?
Click to expand...
Click to collapse
Do not buy this thinking it will enable GPS - it won't.
Mike
mikechannon said:
Do not buy this thinking it will enable GPS - it won't.
Mike
Click to expand...
Click to collapse
LOL yea he's right, all it does is increase your bluetooth GPS devices range, it's just an add-on antenna to stick on the outside of your car for better reception.
As far as the Digitizer goes, I suggest you buy an LCD with a digitzer already on it. It's very difficult to replace just the digitizer and in most cases you'll end up ruining the LCD under it while taking the digitizer off, I've tried it about 5 different times and I could never get it to work correctly, so just go with the full LCD/Digitzer already together.
Related
ok, i dont have any problems anymore.... a couple of days ago the touch screen on my uni stopped working. i would just like to tell people what i have done to solve this, although most of you already know etc etc ... always usefull. theres a little screw to the left hand side of the screen when it is turned. when removed with metal plate will come off and you will be able to see the flex cable. i had to adjust mine slightly as a friend of mine (without telling me) had turned the screen round the wrong way and forced it!! ARGH!! i wound it round untill it allowed the screen to rotate nicely, seemed to solve the touch screen problem. anyway though i would post that hope it helps someone.
You have Broken Digitizer Look on Ebay its cost 15$$ By brand New
You have Broken Digitizer Look on Ebay its cost 15$$ By brand New
Raptorgda said:
You have Broken Digitizer Look on Ebay its cost 15$$ By brand New
Click to expand...
Click to collapse
do you have the part number etc, something i can put in the search engine...
I tried "XDA EXEC touch screen" and as if by magic there it was......lol
write in ebay sercher Xda exec digitizer
hi everybody.
some weeks ago i bought a new casing for my trinity on ebay. as I had to open my trinity while on a long trip far away from home and htc tech support (the "hang up" button broke), i had already broken my guarantee. so i decided to change the casing myself. i managed to do that (it was not easy!!) and closed the casing and everything was alright, but some days later trinity started to have graphics issues. sometimes it hangs and the display gets kind of scrambled, when i reset it it posssibly doesn't show anything on the screen or it hangs during the boot, sometimes it helps simply shutting the device down and restarting, sometimes it helps pressing the left side of the casing (front and back casing elements) together.
what can that be? at the moment it works alright, but this is not ok for me. somebody with hardware know-how can tell me which part can be the "bad one" and what i can do to fix that? i don't want to pay the repair fee at htc tech partner, and i want to wait till the htc touch cruise is available to buy a new one!
thanks
christoph
ESD?
Sounds like you've br0k3d something.
jlebowski said:
hi everybody.
some weeks ago i bought a new casing for my trinity on ebay. as I had to open my trinity while on a long trip far away from home and htc tech support (the "hang up" button broke), i had already broken my guarantee. so i decided to change the casing myself. i managed to do that (it was not easy!!) and closed the casing and everything was alright, but some days later trinity started to have graphics issues. sometimes it hangs and the display gets kind of scrambled, when i reset it it posssibly doesn't show anything on the screen or it hangs during the boot, sometimes it helps simply shutting the device down and restarting, sometimes it helps pressing the left side of the casing (front and back casing elements) together.
what can that be? at the moment it works alright, but this is not ok for me. somebody with hardware know-how can tell me which part can be the "bad one" and what i can do to fix that? i don't want to pay the repair fee at htc tech partner, and i want to wait till the htc touch cruise is available to buy a new one!
thanks
christoph
Click to expand...
Click to collapse
Hi, I did similar thing...I assembled my trinity to change case to white. After the LCD did not work at all.
Of course service said, I broked garantee, and there is some problem with LCD cable plug.
what did the repair cost?
did you go to HTC? did they change the display plug?
it's a very subtle error in my case...
How To Disassemble HTC P3600
I also want to change my casing.
From what I hear ... this may be not such a good idea.
Hoever ... all I can help with is this disassemble manual for HTC P3600 (http://rapidshare.com/files/82751326/How_To_Disassemble_HTC_P3600__Trinity_.pdf.html).
Maybe disassembling, cleaning all the plugs and assembling it again can help (sounds stupid ... but who knows).
thanks ..
one of the problems with the casing i bought was that the metal counterparts of the screws were not(!) present in the new one. so i had to cut them out of the old one, heat them and press them into the new case. luckily, i had ordered two new casings (to change it again after some months when the grey/silver paint would have fell off till total aesthetic destruction - of this otherwise really slick phone - again), because trying to press that counterpart (don't know the word) without heating resulted in total damage
then I had hoped that not only the keypad, but also the electronics plate under the keypad (my "hang up" button still isn't perfect i have no "klicky" feel any more) would be included. no luck here.
so everybody please stay away from trying to change casings or any other hardware issue with your htc phones. i am opening my htc/qtek (before: s100, three units) phones for a longer time now and must say i will stop doing that and return to being a "normal" user. it all gets worse
thanks
I just remembered ... take a look at this site: http://cnn.cn/shop/p3600-trinity-c-277_278.html
All the stuff looks genuine ... maybe this casing will fit you better and there are spare touch screens also.
P.S. White casing DOES NOT peel.
jlebowski said:
did you go to HTC? did they change the display plug?
it's a very subtle error in my case...
Click to expand...
Click to collapse
I went to E-care, the HTC support in Hungary. I was lucky, the expert repaired it free, but in the future there is no garantee
Lucky you ... there is HTC support where you live
my LCD screen broke.
I have replaced my LCD screen because it was cracked, the new screen does not even power up. I can hear wm6 running in the background but the digitizer nor the screen seem to be responding at all. If use the old screen it seems to work fine.
Any ideas or comments on how to get this new screen working?
btw, I have a gen1 htc p3600.
osavioro said:
I just remembered ... take a look at this site: http://cnn.cn/shop/p3600-trinity-c-277_278.html
All the stuff looks genuine ... maybe this casing will fit you better and there are spare touch screens also.
P.S. White casing DOES NOT peel.
Click to expand...
Click to collapse
many thanks for the link! i just ordered the a new keypad electronics plate
jl
jlebowski said:
many thanks for the link! i just ordered the a new keypad electronics plate
jl
Click to expand...
Click to collapse
Always glad to help
Hi,
anyone knowing a good and cheap way to get a new case/body for the TyTN? My did fall a few times onto stone and got some really nasty scratches and the camera-lense got a scratch directly trough the center...
The Buttons under the screen (softkeys, answering call, DPad, etc) did not
function sometimes. Now, after I disambled the whole phone and checked the PCB (but didn't found any visible failure) of the buttons I get a more weird error: sometimes all button work and sometimes NO button works. Thought there was some dust in the little contact to the PCB but even alcohol didn't the thing....
any idea for spareparts?
Nothing on ebay for tytn, only JasJam housing...
Oh, there's this tytn case...
Its almost half the price of a good 2nd hand phone though...
yep, not different from the german ebay-auctions you can find there.
I keep wondering what is broken in my phone, though. Maybe the connector from the button-pcb to the main-pcb. Need to try to clean it with alcohol.
Maybe I should get a totally new phone? Pity that the Iphone 3G lacks a QWERTY-keyboard and is T-Mobile only in Germany.
refurbed my phone with a case and tools bought on ebay from this dude,top gear totaly oem and great fit.
http://myworld.ebay.com.au/sandymobilephones:D
stevieboy said:
refurbed my phone with a case and tools bought on ebay from this dude,top gear totaly oem and great fit.
http://myworld.ebay.com.au/sandymobilephones:D
Click to expand...
Click to collapse
nothing for sale
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
Hi.
My Diamond 2 has stopped working with touch screen commands.
Problem:
The upper layer of touch screen somehow separated from some part inside, and phone doesn't react to touch commands.
It's same as you take for example transparent label and stick it to some glass and in some places you see bubbles, but it's much bigger area.
Solution:
Phone going to service.
Anyone had same problem with your phone ?
Image attached.
Joker2206 said:
Hi.
My Diamond 2 has stopped working with touch screen commands.
Problem:
The upper layer of touch screen somehow separated from some part inside, and phone doesn't react to touch commands.
It's same as you take for example transparent label and stick it to some glass and in some places you see bubbles, but it's much bigger area.
Solution:
Phone going to service.
Anyone had same problem with your phone ?
Image attached.
Click to expand...
Click to collapse
..like michael jackson song: You are not alone...http://forum.xda-developers.com/showthread.php?t=522813&highlight=broken
Digitiser...
You can get a brand new housing and digitiser from eBay for £24.99... I've just ordered one for mine. Unfortunately, they come from Hong Kong, so I have to wait a couple of weeks but my device will be like new again! You may be able to but just the digitiser without the housing... worth a look
Short term solution is to pull apart with duct tape until newton rings disappear.
grahamkdt said:
You can get a brand new housing and digitiser from eBay for £24.99... I've just ordered one for mine. Unfortunately, they come from Hong Kong, so I have to wait a couple of weeks but my device will be like new again! You may be able to but just the digitiser without the housing... worth a look
Click to expand...
Click to collapse
What do I exactly search on ebay ? Got link where did you buy ?
And how do you replace it ?
Joker2206 said:
Hi.
My Diamond 2 has stopped working with touch screen commands.
Problem:
The upper layer of touch screen somehow separated from some part inside, and phone doesn't react to touch commands.
It's same as you take for example transparent label and stick it to some glass and in some places you see bubbles, but it's much bigger area.
Solution:
Phone going to service.
Anyone had same problem with your phone ?
Image attached.
Click to expand...
Click to collapse
Same on my device, I will send to service.
Can anyone confirm a new digitizer fixes the problem? Seems like it would, just don't want to tear my phone apart and wait 2 weeks for one to find out it's something else.
Daisjun said:
Can anyone confirm a new digitizer fixes the problem? Seems like it would, just don't want to tear my phone apart and wait 2 weeks for one to find out it's something else.
Click to expand...
Click to collapse
Some people did confirm. Try reading post from a link that cyron wrote on first reply to me.
I've had mine repaired twice in the last 3 months with this problem. Warranty covered the repairs. Apparently according to the UK support 'it's not a common fault'. Yeah!
touchscreen can be actuated
I am Brazilian, sorry for my bad English.
I saw the picture on screen seems to be driven directly, if your appliance has pelicula try to remove it. May be keeping the touchscreen.
It happened to me.
TD2 - WM6.5 - Manila2.5 - PTG
Julio Cesar Carneiro Alves
Contagem, MG
Brasil
juliocesar.ca said:
I am Brazilian, sorry for my bad English.
I saw the picture on screen seems to be driven directly, if your appliance has pelicula try to remove it. May be keeping the touchscreen.
It happened to me.
TD2 - WM6.5 - Manila2.5 - PTG
Julio Cesar Carneiro Alves
Contagem, MG
Brasil
Click to expand...
Click to collapse
Read my last post here.
http://forum.xda-developers.com/showthread.php?p=5923901#post5923901
Same problem