Hello,
I'm a Qtek S100 owner and when I try to make a call by my car handsfree (Blue&Me or Parrot) if the call is the first after the link between phone and handsfree, a high and displeasing noise is heart by the loudspeakers for about 2 or 3 seconds.
What is the problem?
Thanks,
Josep
uh, displeasing noise ...
Have you tried to reinstall the bluetooth connection between your S100 and the bt handsfree?
I had a constant noise (like white noise) some time before, and after deleting the connection and new "install" it was gone away.
Related
Greetings,
I'm using a Sony Ericsson HBH-DS970 stereo Bluetooth headset with my TyTN and so far I have only one gripe - when the headset is connected, the ring tone somes through the handset only, not the phone itself, which means that I'll miss any incoming calls if I don't have the earbuds inserted.
Also, the ring tone sometimes does not start until about 20 seconds after the display has started to announce the incoming call.
I tend to have the earbuds hanging from my neck if I'm not listening to music, and the ring tone is not loud enough to be heard that way.
I suspect this may be by design, because it's assumed that a stereo Bluetooth headset is always in/on the ears when connected to the phone, but I want to use the 970 as my only headset even when I'm not about to listen to music.
Is there any way to get a ring tone from both headset and phone?
/POL
?
Anyone figure this one out yet? I have the same problem...
same here, anyone find a solution please post, I think I can change it from the registry I will check it.
Can I ask you folks a question relating to the use of the headset Sony Ericsson HBH-DS970 with the HTC Hermes...do you get all the functionality ie caller ID, the ability to accept and reject the call, compatible with mediaplayer etc.
I have a concern that with the headset not being a HTC product, perhaps some of the Sony functionality may not work with the handset.
Thx
From my experience the ringtones will not come to the speaker if you use the headset as wireless stereo. I only use the headset as handsfree, which makes the ringtones go through the phone.
I used the DS970 for two week with my O2 Trion,feature like Caller Display is No any problem,But when using media player sometime it may out of control, like cann't accept call and control volume or stop.
And the sound quality is acceptable,but it will stop few second after 1 or minutes, I have change the regedit.
May I know is there any way to fix it?
Still no solution?
Anyone come up with a solution to this problem? It really bugs me not to get a ringtone from the unit itself, just thru headset... Works just fine with my old mono handsfree, would be great to have it in the stereo heaseat to...
i have the same problem
hello i have the same problem
the ring sound is only on my headset i have tested with 1.13.097fr and now 1.13.234fr if anybody have the ring on the phone with a headset stereo a2dp cang give us is configuration rom and other soft for the bluetooth.
thank and sorry for my english
juste a little frenchy
There seams as if there's no solution in sight, I got the exact same problem, also with HBH-DS970 and with Jetware Mobile's "Hands-free extension" installed.
I'm still running WM5, anyone who have tried WM6?
/Fluff
Same "design feature" here with my HBH-DS970 and HTC S710 WM6 Smartphone, so it's not ROM, device or OS version specific. I would suggest this is by design.
I'm pretty sure this is by design since thats how it works on my BT8010. Its stereo so it seems to make sense all sounds go through headset although it would be nice if it was an option. The BT8010 has a button on the headset to take it out of music mode so then they will go through the phone but I guess that doesn't help any of you out much.
Another option would be to just uncheck wireless stereo in the pairing and just check it back when you want to do wirelss stereo.
When I press the button on the BT headset to answer incoming call the ringing stops on the caller end and on the cingular 8125 (rom 2.25), but there's a 2-3 second delay before the phone actually connects the call to the BT headset.
On the caller side they have 2-3 seconds of dead airtime, after the ring stops. Because of the connection delay, the caller is already saying hello - hello - hello (etc) thinking the call has been answered.
I've tried 3 different bluetooth headsets (Moto 850, Plantronics 645 & 655, Jabra JX10) and they all experience the same problem.
I've verified it's not associated with the 3 second ring delay issue (posted on XDA) - phone rings almost immediately.
Any thoughts, recommendations, hacks/tweaks will greatly be appreciated. This is becoming more of a problem, as I use my phone mostly for business.
Otherwise the phone has been outstanding.
BT headset delay
I have the same issue with T-mobile MDA and Jabra BT250V. Not only does the delay confuse callers, but they hear the ring tone and buzzing of the vibrator before they hear me... hello...hello...hello. It really sucks.
I have tried a Motorola headset (H350) the delay is shorter but the headset sound quality sucks. I was going to try the Jabra JX10 next and hope for the best.
I've also tried using the "BT on" feature of PocketZenPhone to avoid the delay. Not a satisfactory solution.
Does anyone have a solution for this? Is anyone answering calls on their BT headset and getting a quick connection? Is this just me?????
dratliff said:
When I press the button on the BT headset to answer incoming call the ringing stops on the caller end and on the cingular 8125 (rom 2.25), but there's a 2-3 second delay before the phone actually connects the call to the BT headset.
On the caller side they have 2-3 seconds of dead airtime, after the ring stops. Because of the connection delay, the caller is already saying hello - hello - hello (etc) thinking the call has been answered.
I've tried 3 different bluetooth headsets (Moto 850, Plantronics 645 & 655, Jabra JX10) and they all experience the same problem.
I've verified it's not associated with the 3 second ring delay issue (posted on XDA) - phone rings almost immediately.
Any thoughts, recommendations, hacks/tweaks will greatly be appreciated. This is becoming more of a problem, as I use my phone mostly for business.
Otherwise the phone has been outstanding.
Click to expand...
Click to collapse
i have the moto HT820 stereo bluetooth headset and experience nothing like that, even when running my bluetooth gps reciever... the call is answered as soon as i hit the button... only problem i have is the lagging and skipping music, but i dont listen to music so its not a problem
My H700 delays on both of my Qteks (Wizard and Prophet). It only delays if I close the boom. If I leave the headset with the boom open it picks up right away when I press the side button. With the boom closed when it rings, I find that if I open the boom I have to wait 2-3 seconds for the sound to transfer. If I open the boom and press the button, 2-3 seconds it will hang up on the caller because I guess opening the boom is picking it up already
However, my HT820 stereo headset doesn't have any of those problems. Quick and easy, picks up right away; however there's no boom. My Bluespoon AX5 doesn't delay either.
pdxadmin said:
I have the same issue with T-mobile MDA and Jabra BT250V. Not only does the delay confuse callers, but they hear the ring tone and buzzing of the vibrator before they hear me... hello...hello...hello. It really sucks.
I have tried a Motorola headset (H350) the delay is shorter but the headset sound quality sucks. I was going to try the Jabra JX10 next and hope for the best.
I've also tried using the "BT on" feature of PocketZenPhone to avoid the delay. Not a satisfactory solution.
Does anyone have a solution for this? Is anyone answering calls on their BT headset and getting a quick connection? Is this just me?????
Click to expand...
Click to collapse
I had a bt250, and that delay is a known problem with the bt250,possibly making the problem worse
I’m running the official HTC (Dutch) Windows Mobile 6 version on the HTC X7500.
I’m using a Motorola HT820 Stereo Bluetooth headset to listen to music by A2DP.
I’m using a Jabra BT5010 Bluetooth headset for voice calls.
Voicecalls with the BT5010 are no problem at all. Listening to music with the Motorola headset is no problem too, when the Jabra IS NOT connected (turned off) at the same time.
The Motorola stereo headset and the Jabra BT5010 can both be connected at the same time, they are even working (I can call with the Jabra and listen to music with the Motorola) but now and then the stereo music is lagging.
When it starts lagging in stereo audio playback it doesn’t seem to stop anymore. Sometimes the music continues the normal way, and sometimes the lags will come up again a few seconds later.
There are no more lags when I then shut down the Jabra headset.
Is there a way to solve this? It looks like some sort of “Bluetooth bandwith” issue since it only happens when both headsets are connected.
Please note that even though the Motorola HT820 can make voice calls too, I only checked the “Wireless Stereo” service to be used, and “Wireless headset” is only selected for the Jabra.
Adding/editing registry entries like BitPool, UseJointStereo, MaxBitPool, SampleRate and all WILL NOT resolve this problem, I’ve already tried that.
Thanks guys!!
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a solution to have the same clear sound in a phone call as i have when lissen to music.
i found another annoying bug. When a call are finished it shutdowns the bluetooth connection just for a few seconds so my headset disconnects.
Has anyone a working connection with HBH-DS200 headset?
I suspect it's my Tilt's problem coz A2DP drop happens to my DS220 and car kit JVC BT-1
Hi all,
I have a HTC Touch HD and I am using both Destinator and NDriver navigation programs.
Recently, I purchased a bluetooth headset (HTC BH M300) which supports A2DP.
Now, in top bar icons, I have another icon displayed, indicating the ability to stream music. I have a problem though…
All my device sounds (except of the incoming calls of course) are now streamed to the headset. When I use the navigation programs, the voice with directions come trhough the headset and not the speaker (like when I was using a non A2DP headset).
This is annoying because I don’t like having to wear the headset at all times while driving. I need to hear to the driving directions through the speaker and talk with the headset when in a call.
Is there a way to solve this?
Go to start/settings/connection/bluetooth and on your a2dp bluetooth headset uncheck set as wireless stereo , to remain only set as headset device