Related
Here is what I've done so far. Anyone with experience or anyone who has successfully gotten their setup to work, please chime in !
1. Install the JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship.exe rom. Test. Works fine when connected by USB, syncs to any Exchange server with no problem.
However, When I try to sync to any Exchange Server or a different Exchange server through the GPRS connection, it sits on "Synchronizing folders", then "Looking for Changes" and finally after a few minutes of doing nothing, it just gives up and goes back to "Waiting for network".
2. As a test, I've tried to install a different ROM. This time ME_DT_WWE_1182553_106_10303_Ship.exe. Now when I try to connect to the GPRS connection, it retries the dial twice, then it "Dialed : open.softbank.ne.jp. Cannot connect for an unknown reason. Check your connection settings, etc.". This is after installing the SoftBank extended ROM and doing a hard reset, which worked fine for the previous i-mate ROM.
Anyone have any suggestions or ideas?
logimob
Wireless OK
After doing some more testing, and changing back to the original i-mate ROM, it seems to sync to Exchange just fine using a Wireless connection.
However going back to GPRS, and it's back to doing exactly the same "synchronising folders"/"looking for changes".
To this date, I have never had a successful GPRS sync - has anyone else?
Japan users?
There are no Japan users with SoftBank GPRS ActiveSync working....?
Hi there, Andrew (you sent him an email) point me to this thread, and will try to reply here. Actually I didn't flash my X01HT yet, but I use Exchange daily on my HTC Mteor and HTC Universal with open.softbank.ne.jp, it works flawlessly. I am waiting for HTC Taiwan to send me back my HTC Hermes (Dopod) back from reparation to try.
But ! Even with my X01HT in Japanese I have sometimes difficulties to connect to the internet and I also have the same error as yours. So this is not really only a ROM issue here.
Now I hard reseted my X01HT and soft reset it before installing the Extended ROM, so there, I do not have any Softbank crap installed my my device and once the open.soft... stuff set I have no problem neither.
Finally I know that some ROM are not Japanese network friendly, for example on my HTC Universal, with an iMATE ROM, I cannot place any Video call, nor access to my voice mailbox correctly, I can dial 1416, but when I want to access to my voice mail... it doesn't work.
Now on ALL my device here in Japan I only install a Dopod ROM, they are, as far as I am concerned the best ROM ever made and with them EVERYTHING WORKS, and I will strongly advise you to try to install a Dopod Rom on your Hermes. If you do not have it on the FTP, I have one on my desktop at the office that HTC Taiwan sent me (HER_DopodAsia_1237074_1060010_WWE_SHIP)
Fantastic, I'll try to install the rom at www.dopodasia.com/download/HER_DopodAsia_1237074_1060010_WWE_SHIP.exe
and see how I go. Thanks very much for your help and ideas.
Sorry to hear about your sick HTC Hermes!
logimob
Daimaou said:
Hi there, Andrew (you sent him an email) point me to this thread, and will try to reply here. Actually I didn't flash my X01HT yet, but I use Exchange daily on my HTC Mteor and HTC Universal with open.softbank.ne.jp, it works flawlessly. I am waiting for HTC Taiwan to send me back my HTC Hermes (Dopod) back from reparation to try.
But ! Even with my X01HT in Japanese I have sometimes difficulties to connect to the internet and I also have the same error as yours. So this is not really only a ROM issue here.
Now I hard reseted my X01HT and soft reset it before installing the Extended ROM, so there, I do not have any Softbank crap installed my my device and once the open.soft... stuff set I have no problem neither.
Finally I know that some ROM are not Japanese network friendly, for example on my HTC Universal, with an iMATE ROM, I cannot place any Video call, nor access to my voice mailbox correctly, I can dial 1416, but when I want to access to my voice mail... it doesn't work.
Now on ALL my device here in Japan I only install a Dopod ROM, they are, as far as I am concerned the best ROM ever made and with them EVERYTHING WORKS, and I will strongly advise you to try to install a Dopod Rom on your Hermes. If you do not have it on the FTP, I have one on my desktop at the office that HTC Taiwan sent me (HER_DopodAsia_1237074_1060010_WWE_SHIP)
Click to expand...
Click to collapse
After flashing the Hermes with the new Dopod image, it keeps giving me a
Network Wizard error.
I tried adding the open.softbank.ne.jp settings, but it didn't work.
Then I replaced the Extended ROM with the Softbank Extended ROM. Then the settings for SoftBank were automatically configured - but don't work. It says "the current connection cannot be used for your request". Also, the network wizard comes up every soft reset and says "Your current operator (44020) is not supported. You should obtain an update from your device vendor".
This is kind of confusing - do you have any advice? Did you use the Extended ROM as it was?
Thanks very much for your help
"Your current operator (44020) is not supported. You should obtain an update from your device vendor".
Do not worry for that I have the same problem.
Now you are telling me that you cannot login at all, cannot surf at least the internet?
Just a quick thought... my SBS do not have a real SSL, this is a SBS SSL, so when I quote the box SSL connection in my Mteor or Hermes... it won7t work... try to unquote this box...
Hi there,
Thanks for your reply. I've been messing around on this all night/all day again, and I've made some slow painful progress!
Firstly, I'm glad you had the same problem. Now I'm reassured that the problems are not related.
Next up, I've been trying to get the internet working. I managed to get it to connect before, but whenever I tried to access any site through IE, I got the error "エラーが発生しました。リクエストが不正です。 wj46000e".
I have since done a few hard-resets, and now it doesn't connect, despite me putting in the connection details 10's of times. I now get the error "Dialed : open.softbank.ne.jp. Cannot connect for an unknown reason"
Did you ever have these kinds of problems?
What kind of extended rom are you using? I just copied and pasted the whole Softbank Extended ROM, which worked perfectly on the JASJAM ROM.
If you have any ideas, I'd be really grateful.
Thanks very much
Daimaou said:
"Your current operator (44020) is not supported. You should obtain an update from your device vendor".
Do not worry for that I have the same problem.
Now you are telling me that you cannot login at all, cannot surf at least the internet?
Just a quick thought... my SBS do not have a real SSL, this is a SBS SSL, so when I quote the box SSL connection in my Mteor or Hermes... it won7t work... try to unquote this box...
Click to expand...
Click to collapse
Ok so this stuff
エラーが発生しました。リクエストが不正です。 wj46000e
I also get this error while ago... actually the first time I had my X01HT and with the Japanese ROM.
I really do not know what is going on with your device, I just hardreset my HTC Universal and put ALL the setting by hands, NO cab from crap Softbank, and it WORKS !
We should maybe meet one day, and try to let me see your device...
Fantastic - you're really giving me hope that one day soon I'll have a fully functioning device!!
I'll try restoring the original Extended ROM and inputting all the settings manually again. Hopefully it'll work this time.
I'd love to meet up for a chat and a show and tell session! I'd like to see your fully functioning device. Send me a private msg and I'll reply with my Skype/Email address.
logimob said:
Fantastic - you're really giving me hope that one day soon I'll have a fully functioning device!!
I'll try restoring the original Extended ROM and inputting all the settings manually again. Hopefully it'll work this time.
I'd love to meet up for a chat and a show and tell session! I'd like to see your fully functioning device. Send me a private msg and I'll reply with my Skype/Email address.
Click to expand...
Click to collapse
Ok Will PM U, but just for reference I flash back my Universal to its orginal ROM and not the 1.90 that we can found here, and straight after the flashing, I put manually the Softbank setting and... WORKS ! I am sure you made a mistake somewhere this is not possible otherwise
Ah ok I see... so you installed your original ROM. Is that available for download anywhere? I'd like to replicate your setup as closely as possible.
Daimaou said:
Ok Will PM U, but just for reference I flash back my Universal to its orginal ROM and not the 1.90 that we can found here, and straight after the flashing, I put manually the Softbank setting and... WORKS ! I am sure you made a mistake somewhere this is not possible otherwise
Click to expand...
Click to collapse
I just tried installing the other Dopod ROM - with exactly the same results. "cannot connect for an unknown reason". This same stuff worked perfectly on the JASJAM ROM, so I am starting to think these problems are somehow ROM related.
Where did you get your ROM from again?
logimob said:
Ah ok I see... so you installed your original ROM. Is that available for download anywhere? I'd like to replicate your setup as closely as possible.
Click to expand...
Click to collapse
This is a Rom for my universal, not my Hermes, My Hermes with a Dopod rom will be sent back to me today. And since my wife want to use the Japanese X01HT I didn't flash it to US... anyway let's meet and check this out.
Guys, are you using the standard Softbank PC Site Direct connection?
If so, you'll never get Exchange Activesync working unless you uncheck the box for "This server requires SSL" AND the Exchange administrator has configured the system to allow non-SSL connections.
Softbank's "open.softbank.ne.jp" connection is anything BUT open. They are doing port blocking and currently appear to only allow port 80, 25, 110 unless you use Pocket IE. This means that ActiveSync and most IM applications fail.
Softbank is reported to say that they plan to begin supporting Exchange ActiveSync "sometime in December" - until then, the port is closed and there is nothing you can do to make it work.
The workaround is to use [email protected] (but this can get very expensive). [email protected] does not have any port blocking.
Anybody heard any updates as to when Softbank will stop blocking the ssl port for Exchange ActiveSync? Still scheduled for sometime in December? This is killing me . . . so stupid that they would do something like this but so typical.
I will die and rot away before these bastards open up SSL...
hguabmur said:
Anybody heard any updates as to when Softbank will stop blocking the ssl port for Exchange ActiveSync? Still scheduled for sometime in December? This is killing me . . . so stupid that they would do something like this but so typical.
Click to expand...
Click to collapse
I have been looking through the Japanese sites as well but haven't seen anything. I just keep testing every day. Frigging bastards... I told my Exchange and networking team in the US about it and they had never heard of a Windows Mobile device that was blocked from syncing with Exchange SSL over the wireless.
I have a friend in Korea though with a Samsung WM5 device - his works with Exchange but other ports are blocked so he can't use IM apps. So Japan mobile providers are even more backwards than in Korea.
Hi, hope this issue has been solved already but just in case:
Softbank open APN open.softbank.ne.jp *did not* allow SSL port to go through, so you needed to turn off SSL mode of ActiveSync.
It seems, though, since a few days ago, Softbank opend almost all ports for APN open.softbank.ne.jp thus you should be able to use SSL ActiveSync without problems.
hiroshiy said:
Hi, hope this issue has been solved already but just in case:
Softbank open APN open.softbank.ne.jp *did not* allow SSL port to go through, so you needed to turn off SSL mode of ActiveSync.
It seems, though, since a few days ago, Softbank opend almost all ports for APN open.softbank.ne.jp thus you should be able to use SSL ActiveSync without problems.
Click to expand...
Click to collapse
It works!!
I tried just like Tuesday and it didn't work.
OK, now this device is finally useful!!
khammo01 said:
It works!!
I tried just like Tuesday and it didn't work.
OK, now this device is finally useful!!
Click to expand...
Click to collapse
Glad to hear it worked. Now my interest is how Softbank is going to treat PC users trying to use X01HT as a wireless modem. I personally hope they provide unlimited usage for $80-$90 per month... (after April)
Does anyone know what version of Blackberry Connect software is required for the new "official" ROM (ver. 2.15.502.3) released for the Cingular 8525?
I'm currently running:
Blackberry ver. 2.1.2.54
Transport ver. 2.1.0.91
System ver. 237.240.204.246
Device type: HTC-Hermes
Everything worked fine on the previous ROM, but after updating, it will not connect. I'm assuming I need a newer version. Any suggestions???
Thanks,
Brett
This question is also being asked in this thread:
http://forum.xda-developers.com/showthread.php?t=303037&highlight=blackberry+connect+cingular
One replier said we need to use the original ROM, not the upgraded ROM.
Waiting to hear from others if that has been their experience...
This question is also being asked in this thread:
http://forum.xda-developers.com/showthread.php?t=303037&highlight=blackberry+connect+cingular
One replier said we need to use the original ROM, not the upgraded ROM.
Waiting to hear from others if that has been their experience...
xda4web said:
This question is also being asked in this thread:
http://forum.xda-developers.com/showthread.php?t=303037&highlight=blackberry+connect+cingular
One replier said we need to use the original ROM, not the upgraded ROM.
Waiting to hear from others if that has been their experience...
Click to expand...
Click to collapse
If that's the case, will the Blackberry client work w/ WM6? Might as well go forward instead of backwards, right?
thebrettman73 said:
If that's the case, will the Blackberry client work w/ WM6? Might as well go forward instead of backwards, right?
Click to expand...
Click to collapse
BBConnect is working well in WM6 Black 3.01
Thanks jakirkla for the helpful info!
Need someone to help with the following questions before
I take the big step of flashing up to Black 3.01 from
the Official Cingular 8525 ROM upgrade:
1. Does BB Connect work for BIS (I don't use BES)?
2. Does BB Connect actually generate a PIN for you when you first run it?
3. Can you enter the new PIN and IMEI in the
"Change Handheld" dialog on mycingular.blackberry.com?
4. How fast is email delivered - as fast as an actual Blackberry handheld?
Cheers!
Here's my setup:
1) Cingular 8525 SIM/CID unlocked (HardSPL 7)
2) Elf's 2.1 Crackberry ROM (WM6) - very nice stable build.
3) BBConnect 4.0.0.67 CAB
4) Cingular Blackberry Tethered Unlimited (both BIS and BES enabled)
Make sure you have a data connection working first.
BBConnect will issue you PIN after you click the Register button - you can see this in the BB Connect utility on your handheld.
You can then use this PIN and your phone IMEI on Cingular's BB site:
http://mycingular.blackberry.com/
Don't forget to download the Service books.
If your company has Outlook Web access for Exchange Server you can avoid BES.
BBConnect only allows 3 email boxes on a non-BB device.
Everything works fine except that the BB Service hogs the wireless connection so that I sometimes have problems with other services require internet connection.
Toss that Cingular ROM (even the latest 2.15 update) - it's worthless and a real headache - very unstable
Any idea where i can get the needed BB apps?
Has anybody gotten blackberry connect to work on a Herald?
I just tried it on mine and ended up hardreseting cause it would never boot completely after it.
Help
Are you saying that you cant get the gprs settings for the black berry plan?
I am running the employee blackberry plan on my wing and it works great.
If you are using the black berry internet plan you need to have your gprs connecting to wap.voicestream.com
where did you get the cab for your wing
Cab
I got the cab here:
http://thinkabdul.com/2007/05/30/do...obile-5060-smartphones-and-pocket-pc-devices/
The issue is I install it and it totally hangs my herald up to the poing that not even a reset works. I guess I'll try and see now with WM6, because I did that before upgrading.
Anybody know why it doesn't work?
Thanks
Is this only working on the factory rom or a cooked rom? Im going to test this tonight anyway but i like my Touch layout but wouldnt mind testing this. According the website it changes out the Windows icons and home page to match the needs of RIM.
I will post once i test.
After many hours of testing it doesnt work on the Herald at this time. The software is only good for the Dash. I have to finish my testing from work because it seems to only accept a BES server. I got the service onto the Dash. I will post later how it works but to be honest this process what not worth the trouble.
Maybe someone can work on a cab file to make this compatable with the Herald. Also Xavier, custs of T-Mobile cant use the BB service with the Wing. Employees are able to use it because you are not truely on the BES on windows you are using webmail to bypass the firewall. This software once it works on all Windows mobile phones will generate a PIN which is required for blackberry users to use its service.
Hope this info helps.
Hard reset your device, install the blackberry software, but install the software in the phone memory, and then synchronize etc. basicaly u need to have a clean device to have it working, i encountered the same problem i followed this procedure and it works on HTC P4350. a.k.a. Herald.
is it possible to get BlackBerry Messenger on a winmo device? if u have blackberry connect does that mean you also get blackberry messenger? or is blackberry connect only for emailing? (which new winmo devices from carriers seem to do just fine with push email). thx
Blackberry Connect not working on my Wizard
I'm trying to get Blackberry Connect running on my Wizard. I have a couple of issues that I haven't seen addressed anywhere in the forums.
First, my info:
Device = HTC Wizard G4, Cingular 8125.
OS = WM 6.1 TNT.19199 v2.
Carrier = AT&T w/ a PDA Enterprise data plan, which allows BBConnect
My company runs Blackberry Enterprise Server.
I was able to get Blackberry Connect 4.0 from here: http://www.sems.org/entry.asp?ENTRY_ID=225
Does anyone have a more recent version?
Do you know if I still need to use a hex editor to spoof my OS version? I haven't tried that yet.
Does anyone currently have BBConnect running successfully on an AT&T data plan using your 8125's IMEI number?
I installed BBConnect 4, it rebooted, I tried activating the BB, but it just said "Not Connected". Occasionally if I go to Utility and click "Register" the status screen will say "Service: Network Available" then "Data Tunnel Available" then back to "Not Connected".
Can I please hear from anyone running BBConnect on a Wizard? What is your configuration? What is your version of BBConnect? Where did you get it? What am I doing wrong?
Thanks in advance,
Dave
Tmobile Wing-Herald and BBC
This is more toward mrbrady12--
You posted:
Maybe someone can work on a cab file to make this compatable with the Herald. Also Xavier, custs of T-Mobile cant use the BB service with the Wing. Employees are able to use it because you are not truely on the BES on windows you are using webmail to bypass the firewall. This software once it works on all Windows mobile phones will generate a PIN which is required for blackberry users to use its service.
I am having this very issue. I have a new Wing, I am on Tmobile, I have a BES data plan for my sim. Lastly I have the BBC 4.0.0.97...Installed without issue to phone memory. But will never generate a pin. Even speaking to BES server over GPRS or 802.11 etc, it will not activate my corporate account. I took my card to Tmobile and tested on a true bb device.. Worked no issue.
So I would tend to agree with you regarding these folks not truely on BES service over celluar means. You might be catching internally via 802.11 but even that seems odd.
So, please if the "wing'ers" have this working share the info..
thanks all
do you know the muffinman..the muffinman..the poking ms muffin.
Any solution for use this service on polaris????
I'm not be able to retrive PIN:code.
Best Regards
Hi
BlackBerry Connect is hard coded via the BES Server you connect to. It will only allow you to run BBC on 'approved ROMs' (i.e. WM6.0 only and specific radio stacks only). If your device and stack aren't right you will connect momentarily and then you will be disconnected,
There is a german o2 ROM that supports BBC but I've not seen that in a while and you'll have to search for it.
Yours
Leon
this isnt true!
Radio Stack Version isnt checkt via BBC! They only check OS Version, AKU Value and Device Name. Some times the check your Provider too!
If BBC doesnt work ... mess around with the AKU Version. The easiest way to get it up and rounding ... use original Polaris Firmware.
I still don't know anyone who's been able to get it to work. This has been discussed in several different threads. Here's one.
http://forum.xda-developers.com/showthread.php?p=2091924#post2091924
I am using Exchange push mail now, which in my opinion is better anyway. The BC software is a resource hog and if Exchange is an option for you, I advise that route.
ok, here is another one. i have a orbit 2 (htc-polaris), bebe's ROM 0.67, vodafone germany blackberry SIM and version 4.0.0.97.
i dont get any PIN (Pending) and no stable connection.
but it seems there are workarounds by changing settings in registry, to let blackberry think you have another configuration. but i dont know any details.
anyone managed it to work?
Hi , I recently got a HTC Touch 3G from Orange as i had the HTC TyII and love that phone with the wifi and now i have this new phone that seems quite good however has been changed with the Orange Unique that allows you to connect to wifi but not use it , why would they do this? (money making). The Unique technology don't do any thing that it clams to do i don't seem to get better coverage or any thing, just high data costs and a low batter.
I want to use the wifi on my phone for the internet and google maps etc, is the only way around this to flash my phone to a ROM on this site ? If so i understand that is voids my warranty , but want to know if any one has done this successfully (Hope Orange hasn't put a block on Flashing etc)so that i can do the same because i do miss my wifi and may just go back to my HTC TyII .
Thanks
hi mate i got mine about 2 weeks ago.. n hacked the ass out of it... it too was Orange UK
i was disgusted when i got it to fined it would not use the wifi as a net connection! but it sure does now and i love it!
i will get you some links in a bit
I seriously suggest using a an XP pc... i have vista on my laptop and i found it didnt work as it should... you alos dont see the files of the actual phone on vista u just see the memory card!
with xp you see everything!
first go here and modifiy the SPL to HPSL this bascially unlocks the phone to allow you to flash new roms (but its not sim unlock etc) you need to do this or flashing another rom will not work!!!
http://forum.xda-developers.com/showthread.php?t=483465
next you need http://forum.xda-developers.com/showthread.php?t=441865
and you then put that in the same folder as the rom file you wish to flash!
i go for this one - http://forum.xda-developers.com/showthread.php?t=524102 as recommended by Flub..
i really love it!
im sure others will correct me if i have missed anything but this is basically what i did!!
enjoy!
Thanks alot
thanks for your help
Wifi doesn't work at all
Hello there,
I am completely new to HTC world. Recently I bought Touch 3g locked to Orange and am currently using it with O2 after unlocking. Could never use its wifi until now with the Unique even on Orange.
I had only seen some web pages when connected through the Orange 3G.
Could you please let me know how can I remove the Unique and use it as non-Orange HTC?
Many thanks.
Touch 3g Orange
Guys, I have a touch 3g branded from Orange. Used Hard SPL - ensure you have the correct version, and that it installs correctly - reaad the hard SPL posts on how to do this - carefully - and read them again toensure you have the correct version and it loads correctly, then flash whatever rom you require - I went with the standard one and it worked first time, perfectly.
Wifi is rock solid, and it has lost all the rubbish suppressions that Orange introduced in their rom.
Good luck - reading around these forum will solve your issues no problem
Thank you neilcbennett!
I will try to work out hard spl. Wish me gud luck i'm doing this for first time!
DJHicks said:
I seriously suggest using a an XP pc... i have vista on my laptop and i found it didnt work as it should... you alos dont see the files of the actual phone on vista u just see the memory card!
with xp you see everything!
first go here and modifiy the SPL to HPSL this bascially unlocks the phone to allow you to flash new roms (but its not sim unlock etc) you need to do this or flashing another rom will not work!!!
http://forum.xda-developers.com/showthread.php?t=483465
next you need http://forum.xda-developers.com/showthread.php?t=441865
and you then put that in the same folder as the rom file you wish to flash!
i go for this one - http://forum.xda-developers.com/showthread.php?t=524102 as recommended by Flub..
i really love it!
im sure others will correct me if i have missed anything but this is basically what i did!!
enjoy!
Click to expand...
Click to collapse
I did all of this but used the updated official ROM from HTC. I could not get the file from the HTC website because it says my S/N is not compatible, I can only assume that this is because HTC have agreed to not release the software to Orange units forcing us poor customers to pay to use 3G internet rather than free WI-FI. A bit of searching led me to an English version hoseted on another website:
http://www.mediafire.com/file/gdoyj...1_Radio_Sign_12. 41.30.16_0.41.30.12_Ship.exe
Works a treat and i love it!
Cheers guys
Wifi & Orange on Touch 3G
Hi Guys,
I specifically asked in the shop that it run WiFi and was ,mis-informed by the sales guy. Not his fault he was brain washed.
Anyway, came here did Hardspl & Tommy34's rom. Its great solved a battery drain (auto off wans't working) & I'm now able to easily turn off 3g until I really need it or get an o2 eqivalant tariff. WiFi works perfectly.
sever155 said:
I did all of this but used the updated official ROM from HTC. I could not get the file from the HTC website because it says my S/N is not compatible, I can only assume that this is because HTC have agreed to not release the software to Orange units forcing us poor customers to pay to use 3G internet rather than free WI-FI. A bit of searching led me to an English version hoseted on another website:
http://www.mediafire.com/file/gdoyj...1_Radio_Sign_12. 41.30.16_0.41.30.12_Ship.exe
Works a treat and i love it!
Cheers guys
Click to expand...
Click to collapse
Used that myself and worked a treat - many thanks. Wasn't sure if it was for UK phones but it seemed to work ok. Now happily using Wifi.
Tessa1969 said:
Hi Guys,
I specifically asked in the shop that it run WiFi and was ,mis-informed by the sales guy. Not his fault he was brain washed.
Anyway, came here did Hardspl & Tommy34's rom. Its great solved a battery drain (auto off wans't working) & I'm now able to easily turn off 3g until I really need it or get an o2 eqivalant tariff. WiFi works perfectly.
Click to expand...
Click to collapse
After updating the ROM, can you guys still use Orange 3G or do you have to use an alternative provider for internet access?
Those of you that still have the original orange UMA software, I think I have a fix for you that allows UMA to still work but uses your own wifi. Perhaps someone could roll it in to a cab or executable for me if it works.
Make sure you have disconnected any gprs connection that you may already have, change the registry key below and you can test whether it has worked or not by going to http://orangeworld.co.uk/ in a browser. If it is using your wifi you should get "The page you are trying to access is only available via your Orange phone, when connected via the Orange GPRS network. If you are a BlackBerry user trying to access via the BlackBerry Internet Service Browser please change your default Browser to OrangeWorld through which this portal is available."
there is a slight speed lag when resolving dns names I think, but maybe someone can refine the fix that I have come up with.
It has to be run each time the phone is booted:-
REGEDIT4
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{f792e23c-dc19-4668-9be4-f8688b4c18d6}\DSFLTR_UKSC_TNETW12511]
"DestId"="{436EF144-B4FB-4863-A041-8F905A62C572}"
------------
to restore the original value change DestID back to {4BECC613-31B8-4A62-80DC-893041D24D92}
Let me know how you get on.
I used sever155's link to the HK_WWE 2.33.721.1 Rom... and I too am very pleased with the transformation of my phone . thanks for sharing.
sever155 said:
i did all of this but used the updated official rom from htc. I could not get the file from the htc website because it says my s/n is not compatible, i can only assume that this is because htc have agreed to not release the software to orange units forcing us poor customers to pay to use 3g internet rather than free wi-fi. A bit of searching led me to an english version hoseted on another website:
http://www.mediafire.com/file/gdoyj...1_radio_sign_12. 41.30.16_0.41.30.12_ship.exe
works a treat and i love it!
Cheers guys :d
Click to expand...
Click to collapse
merci!!!!!
Like others - I've flashed a new ROM to replace the Orange one. It works great - but I need to return the phone to Orange for a replacement for another reason (found a defect in the case).
I dumped the original Orange ROM - and am all set to flash the device back to its original state.
But I forgot to make a note of the original ROM version number before dumping!
HTC Rom Tool allows me to enter anything but I assume when they get the phone back Orange will want to see an appropriate version number.
Anyone know what it should be for a new Orange branded HTC Touch 3G?
And the country ID for UK? And the model ID? Should it be Jade110 rather than Jade100?
DJHicks said:
I seriously suggest using a an XP pc... i have vista on my laptop and i found it didnt work as it should... you alos dont see the files of the actual phone on vista u just see the memory card!
with xp you see everything!
first go here and modifiy the SPL to HPSL this bascially unlocks the phone to allow you to flash new roms (but its not sim unlock etc) you need to do this or flashing another rom will not work!!!
http://forum.xda-developers.com/showthread.php?t=483465
next you need http://forum.xda-developers.com/showthread.php?t=441865
and you then put that in the same folder as the rom file you wish to flash!
i go for this one - http://forum.xda-developers.com/showthread.php?t=524102 as recommended by Flub..
i really love it!
im sure others will correct me if i have missed anything but this is basically what i did!!
enjoy!
Click to expand...
Click to collapse
Thx DJHicks for the info, got it to work on my Touch 3g on Orange UK.
DJHicks said:
I seriously suggest using a an XP pc... i have vista on my laptop and i found it didnt work as it should... you alos dont see the files of the actual phone on vista u just see the memory card!
with xp you see everything!
first go here and modifiy the SPL to HPSL this bascially unlocks the phone to allow you to flash new roms (but its not sim unlock etc) you need to do this or flashing another rom will not work!!!
http://forum.xda-developers.com/showthread.php?t=483465
next you need http://forum.xda-developers.com/showthread.php?t=441865
and you then put that in the same folder as the rom file you wish to flash!
i go for this one - http://forum.xda-developers.com/showthread.php?t=524102 as recommended by Flub..
i really love it!
im sure others will correct me if i have missed anything but this is basically what i did!!
enjoy!
Click to expand...
Click to collapse
Hey - a real big thanks to DJHICKS and all the others who his post on flashing a decent ROM on the HTC Touch 3G links to - I was going to ditch my new one from orange 'cus unique manager was so cr** - but he saved the day and taught me a whole lot of new stuff about PDAs!! Can't believe I'm now talking about flashing ROMs! THANKS
Unique service access to the internet
Hi All,
I have the orange touch 3g too and have been able to get on the net using the default rom without patches by using 2 steps.
First as the other post suggested stop the gprs (generic term for data access 3g or otherwise). I did this by changing the server name from "orangeinternet" to orangeinternet." this is done by manage connection from the connections tab on setting screen form the start menu. This stops any data connections.
Then once connected to your wifi at home got the unique manager and advanced setting, network adapter, there is a drop down list with work and internet on it. change it to work and then back to internet and ok it. Then you can get on the internet
The last step you have to repeat every time to you connect to the wifi as it forgets, I think the saved networks don't remember this, but if you don't used the saved networks and have the notification turned on it asks you if the network is internet or not which 'could' solve this problem, either way the steps above work reliably for me. I guess I should mention I have orange broadband too, so I get a unique connection too (the green house), this is the bit I hate the tariff is for orange to orange calls no other network, so I have to keep unique off unless I'm doing something on the internet as any call outside orange would be build as far as I can tell, I've not tried as I don't want the bill for it any info on this would be great.
Cheers
I have a solution
I put in on youtube go have a look http://www.youtube.com/watch?v=V1RTX3F1bPk thanks BrooksE
I have been unable to download this file - I wonder if it has been removed from mediafire. Have tried several times from different PCs.
Does anyone know where else I can download it from?
I am trying to free myself from Unique but so far have not succeeded depsite trying to follow the instructions in this thread!
sever155 said:
I did all of this but used the updated official ROM from HTC. I could not get the file from the HTC website because it says my S/N is not compatible, I can only assume that this is because HTC have agreed to not release the software to Orange units forcing us poor customers to pay to use 3G internet rather than free WI-FI. A bit of searching led me to an English version hoseted on another website:
http://www.mediafire.com/file/gdoyj...1_Radio_Sign_12. 41.30.16_0.41.30.12_Ship.exe
Works a treat and i love it!
Cheers guys
Click to expand...
Click to collapse