Related
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
theres numerous threads on this subject. plz try search first
edsub said:
theres numerous threads on this subject. plz try search first
Click to expand...
Click to collapse
wow... what alot of help. you are wise beyond your years. oh btw... i did try searching first.
not just trying to pick on you in particular... but it's so annoying when people reply to threads with this response. it just shows ignorance... if you can't contribute then don't post! they just assume the person hasn't searched.... or.... or... or they don't take the TIME to read the question the person is asking. alot of the time the question is different from what's arleady been posted. i think i'm done ranting.
- Jason
How lame...
I agree with jcrew...
Read the question someone is asking before you lambast them for repeating an already answered question... :?
The question jcrew has asked is fundamentally different that what has been asked in regards to the BT problems with VC before...and NO it has not been answered here yet.
My 2c... :roll:
J Crew said:
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
Click to expand...
Click to collapse
This will do the trick: VoiceEnable
http://www.burling.co.nz/Default.aspx?tabid=151
wgary said:
J Crew said:
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
Click to expand...
Click to collapse
This will do the trick: VoiceEnable
http://www.burling.co.nz/Default.aspx?tabid=151
Click to expand...
Click to collapse
thanks for the help... but unfortunately this will not work either. this was the first thing that i tried when i purchased the headset. it does allow ms voice command to be called up with a headset, but only certain ones. my headset still does not work with this program. it's a conflict of sorts with some headsets and ms voice command. thanks again though.
- Jason
J Crew said:
i'd like to get my default voice dialer program to recognize the ms voice command program that i installed on my 8125. in the application list to record a voice tag... ms voice command 1.5 doesn't show up. is there a reg edit that can be made to have it show up?
Click to expand...
Click to collapse
First, MS Voice Command doesn't record voice tags... it's a voice recognition program. Reading the docs that accompany the program may explain this. Second, you didn’t search hard enough ‘cause Feb 18th I posted a question on this subject in the Wizard Upgrading forum. Can’t blame you much because it IS a ***** to search here, I personally use Google and use the site: parameter to point here. Third, I also couldn’t get the VoiceEnable proggy to work. I change the reg settings accordingly to make it work. You can check out the entire procedure at http://forum.xda-developers.com/viewtopic.php?p=241514&highlight=#241514
Third, ranting gets you no where when you’re asking for help, trust me.
Hope I was of some help.
Steven
Again, I must agree with JCrew
Hi Dr and all,
This hack does work with all bluetooth headsets...Thre have been posts upon posts on this like this:
http://forum.xda-developers.com/viewtopic.php?t=35767
Some of you may be lucky with VC and the Bluetooth set you have, but many of us are not. After we initiate the first call from the headset via VC and hang-up, we cannot re-initiate ANY calls from the BT headset unless we soft reset the Wizard/8125.
So neither the manual VC hacks, NOR the dutch voice enabler CAB do squat for us. Its an issue between VC and specific BT headsets where the BT channel is left open after a call and cannot be shut thus preventing re-initiation of calls after the first.
Unfortunately THERE IS NO FIX for this, MobileHavoc has valiantly tried to fix this, but to no avail...
So, as of 3/22/06, the last word: the hack DOES NOT work for all, and Jcrew is actually asking a different question...Lets all re-read it carefully.
He is asking if we can use VoiceDialer/SDDialer (the Cyberon Program) to start/call/run Voice Command so as to avert the open channel issue I mentioned above...So can we somehow hack SDDialer to initiate and close the VC program... this could potentially avert the program if SDDialer shuts that BT channel after each call...
If we have a solution lets offer it, otherwise lets refrain from mentioning the hack over and over...For at least 50% of us it does nothing and it wastes posts... :wink:
If it's any help to anyone, using the hack to make the bluetooth trigger voice command etc and then using the plantronics voyager 510 headset does work well.
Thanks Jon,
the link I posted above kind-of has a smattering across its posts of which BT sets work or not with VC on the Wizard...
Boogaboo
Re: Again, I must agree with JCrew
boogaboo said:
Hi Dr and all,
This hack does work with all bluetooth headsets...Thre have been posts upon posts on this like this:
http://forum.xda-developers.com/viewtopic.php?t=35767
Some of you may be lucky with VC and the Bluetooth set you have, but many of us are not. After we initiate the first call from the headset via VC and hang-up, we cannot re-initiate ANY calls from the BT headset unless we soft reset the Wizard/8125.
So neither the manual VC hacks, NOR the dutch voice enabler CAB do squat for us. Its an issue between VC and specific BT headsets where the BT channel is left open after a call and cannot be shut thus preventing re-initiation of calls after the first.
Unfortunately THERE IS NO FIX for this, MobileHavoc has valiantly tried to fix this, but to no avail...
So, as of 3/22/06, the last word: the hack DOES NOT work for all, and Jcrew is actually asking a different question...Lets all re-read it carefully.
He is asking if we can use VoiceDialer/SDDialer (the Cyberon Program) to start/call/run Voice Command so as to avert the open channel issue I mentioned above...So can we somehow hack SDDialer to initiate and close the VC program... this could potentially avert the program if SDDialer shuts that BT channel after each call...
If we have a solution lets offer it, otherwise lets refrain from mentioning the hack over and over...For at least 50% of us it does nothing and it wastes posts... :wink:
Click to expand...
Click to collapse
any progress
A work around
Folks, I also have the problem that after ending a call I am unable to initiate VC via bluetooth. I have however found a work around. I am hoping that one of you geniuses out there can create an app to make this smoother. Here is what I found.
I installed the btaudiotoggle and mapped it to one of the hardware keys, if after ending a call I press that button it opens the audio channel to the headset. I then use the button on the headset to close it and VC then works again. The problem is that you have to touch the phone to do this.
My thought is if some smart programmer can create an service type app which is triggered by the end call event and either runs btaudiotoggle or performs the same function.
So that's what I have, hope it helps.
Brian
I've been searching for an hour and can't seem to find the answer.
I have a cingular 8125 and a moto ht820 headset. It's paired and begins to play through the headset but then the voice speed dial comes up and the audio reverts to the 8125 speaker. When it works, it sounds great.
I've found plenty of threads on bt disconnecting on resume but none for my situation.
If it's a .cab install, I think I've understand how to do that.
Will someone either tell me the fix or, at the least, point me to the fix via thread.
Thank you in advance,
Porter
Edit: It's been a few days since the original post. I can't believe , as big as this site is, that noone can answer my plea. Oh well, I'll keep reading and hunting. Hopefully I'll bump into the answer. It seems that I saw it when I first came here but I didn't know that I'd need it so I didn't save it. Thanks for looking.
I think I may have my problem on the run. I looked on the Wiki and found a FAQ "How can I use my Bluetooth headset as Wired Headset?".
It tells how to make bt use media player instead of voice dial. I don't want to use media player, i want to use pocket player.
Right now it says to enter this path in the registry:
"Path"="\Windows\wmplayer.exe"
I've installed pocket player onto my mini sd card. What path would I use? On my mini sd the path is \program files\conduits\pocket player\pocketplayer.exe
What would my path be in the registry?
Also, which registry editor should I use?
Thanks
porterx said:
I think I may have my problem on the run. I looked on the Wiki and found a FAQ "How can I use my Bluetooth headset as Wired Headset?".
It tells how to make bt use media player instead of voice dial. I don't want to use media player, i want to use pocket player.
Right now it says to enter this path in the registry:
"Path"="\Windows\wmplayer.exe"
I've installed pocket player onto my mini sd card. What path would I use? On my mini sd the path is \program files\conduits\pocket player\pocketplayer.exe
What would my path be in the registry?
Also, which registry editor should I use?
Thanks
Click to expand...
Click to collapse
This worked. With media player anyway. I'm listening through my HT820 right now. Hooray! I used regedit82.exe I want to be able to use pocket player still because of the bookmarks. I listen to 3.5 hour mp3's (the lex and terry podcast) so I need bookmarks.
If I haven't been clear enough, tell me and I'll try again.
Thanks
Edit: Pocket Player is now working through the HT820 headset just by my having entered media player in the registry as stated above. This is what I've been wanting since I got this phone. Now I can start learnig the other stuff at a slower pace.
Thanks
Where can I find "regedit82.exe" for HT820/8125 Music Marriage
I have the same problem you faced pairing my HT820 with my Cingular 8125. I haven't been lucky so far in finding a copy of regedit82.exe to edit my registry settings. For the moment, I plan on using Media Player for my Mp3's. Any suggestions on where to locate a copy of regedit82.exe? Also, I'm a novice at this, so would you mind reiterating the steps to make things work. Thks in advance HW
Subj: Where can I find "regedit82.exe" for HT820/8125 Music Marriage
Mr
hwwillis said:
I have the same problem you faced pairing my HT820 with my Cingular 8125. I haven't been lucky so far in finding a copy of regedit82.exe to edit my registry settings. For the moment, I plan on using Media Player for my Mp3's. Any suggestions on where to locate a copy of regedit82.exe? Also, I'm a novice at this, so would you mind reiterating the steps to make things work. Thks in advance HW
Subj: Where can I find "regedit82.exe" for HT820/8125 Music Marriage
Click to expand...
Click to collapse
As far as I remember, the voice dialer/media player registry edit that you are wanting to do will stop the plays for 2 seconds out of the headset then reverts to the speaker problem.
I guess I can't figure out how to send an attachment on the new forum. Just do a search on regedit820.exe That's the one I used. I must've left out the zero. Sorry.
I still don't have anything figured out really. Go to the WIKI FAQ and search for "How can I use my Bluetooth headset as Wired Headset?".
Since what I listen to is mono, I've started using a bluetooth earpiece instead of the ht820. Others have it figured out but not me.
There is a good thread that has ROUNDUP in the title. Search for it. It's a good starting point.
Good luck.
No Results Google regedit820.exe or Wikipedia FAQ ;-|
Thanks for getting back with me so quickly PorterX. Since Googling for regedit820.exe has so far returne "0" results ;-| Would you mind please emailing it to me through either mailto:[email protected] or mailto:[email protected] Also, when I queried Wikipedia's FAQ for How can I use my Bluetooth headset as Wired Headset? Not even the ROUNDUP thread came up. I must not be living right ;-( I appreciate your continued willingness to help. Hope to hear from you again soon. /HW
Note: Maybe I'm searching on the wrong Wiki? I've be using Wikipedia's FAQ (wikipedia.org). Should I instead be searching through EmacsWiki, AtomWiki, UbuntuWiki, EnterpriseWiki perhaps?
Hi!
I've been reading a lot of these forums about activating A2DP with a mono-bluetooth headsets, and found (in different places) some different ways, (change a couple of registry settings and with some pocket pc/headset one had to change a file called BTAGExt.dll)
I have made a CAB file for these hacks and also included the file "BTAGExt_new.dll" I call it _new because I change the registry to locate this new file instead of the old, that way one doesn't have to overwrite the dll file and can, if problems occur, change in the registry instead. The file is needed for some (me included) that are having trouble with music playing in the headset for about 10seconds.
Anyway, i have made a self-installing cab file for this, so that other people may use it easily, without need of hacking the registry, one does not need to use btaudioon and similar program to make this work,
EDIT: AS many people pointed out, here are the instructions to USE this , sorry for that:
Originally Posted by GarrisRP
3.- This was never completely spelled out either; How to activate it:a.Push your headset Voice Activated Dialing Buttonb.Now all sounds should play through your headset.c.To deactivate, push the headset dialing button.
It is nice to see my little hack being used
BE AWARE:
*VoiceCommand DOESN'T WORK!! (since my cab disables it in favour of all-sound in headset)
*I take NO RESPONSIBILITY if this crashes your phone or anything else, USE IT AT OWN RISK!
* It only changes this things:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"UseJointStereo"=dword:00000000
"BitPool"=dword:0000003a
"MaxSupportedBitPool"=dword:00000050
"MinSupportedBitPool"=dword:0000000e
[HKEY_LOCAL_MACHINE\Drivers\Builtin\BtA2dpSnd]
"Priority256"=dword:0000003c
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"LaunchApEnable"=dWord:1
"VoiceCmdDuration"=dWord:15180
And copies this file: BTAGExt_new.dll to \Windows (or whatever windows dir you have)
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway]
"BTAGExtModule"=string:"BTAGExt_new.dll"
Then do a soft-reset and voila, the sound should work.!
This worked great with my X01HT and Motorola HS850.
I used this too with my Sony HBH-60 bluetooth mono headset and it worked perfectly for me too .
Much better for listening to podcasts while in bed!
(no more strangling myself with earphone wires! )
.
I Have an I-Mate JASJAR
and it didnt work with me
green_boss said:
I Have an I-Mate JASJAR
and it didnt work with me
Click to expand...
Click to collapse
Did you try the other alternatives? (I've linked them in some other threads; use the forum search engine.)
Hi,
How do you revert to the initial situation (what are the original registry settings ?)
Thanks
papex
This doesn't work for me with T-Mobile Vario 2 (Ger) and logitech traveller headset
papex said:
Hi,
How do you revert to the initial situation (what are the original registry settings ?)
Thanks
papex
Click to expand...
Click to collapse
I am not sure, but I belive that if you uninstall it it should go "back" to normal.
otherwise, the "normal" would be
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"UseJointStereo"=dword:00000001
"BitPool"=dword:0000003a (this setting just changes the soundquality)
"MaxSupportedBitPool"=dword:00000050 (this too delete if not wanted)
"MinSupportedBitPool"=dword:0000000e (and this, delete if not wanted)
[HKEY_LOCAL_MACHINE\Drivers\Builtin\BtA2dpSnd]
"Priority256"=dword:0000003c (delete if not wanted, better quality)
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"LaunchApEnable"=dWord:1 (KEEP!)
"VoiceCmdDuration"=dWord:15180 (change to 30seconds or whatever, dword:30)
And copies this file: BTAGExt_new.dll to \Windows (or whatever windows dir you have) (delete this file!)
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway]
"BTAGExtModule"=string:"BTAGExt_new.dll" (change to BTAGExt.dll)
cybertron said:
I am not sure, but I belive that if you uninstall it it should go "back" to normal.
otherwise, the "normal" would be
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"UseJointStereo"=dword:00000001
...
"BTAGExtModule"=string:"BTAGExt_new.dll" (change to BTAGExt.dll)
Click to expand...
Click to collapse
Thank you very much.
I use the audio to bluetooth feature with skype as it would otherwise send the sound to the loudspeaker, which, in a public place is not really convenient.
Now, with the code to "on" the sound and the code to"off" it, maybe there would be a simple way to create an app which would toggle from one state to the other? would you know how to do that ? alternatively, is there some kind of scripting tool for the ppc that I could use ?
thanks in advance,
papex
perfect it s work good for me with tytn and HS850
thank you
cybertron said:
"UseJointStereo"=dword:00000001
Click to expand...
Click to collapse
Interestingly, this makes A2DP to transfer everytig in mono on my other MS BT stack-based devices, as has also been pointed out in my related article - are you sure this is the original value?
Menneisyys said:
Interestingly, this makes A2DP to transfer everytig in mono on my other MS BT stack-based devices, as has also been pointed out in my related article - are you sure this is the original value?
Click to expand...
Click to collapse
I believe that it is, at least on my device, but I may be wrong, it was long since I did my cab file. so not 100% sure no,
I was as curios as you, could it be that it uses mono to save bandwith? and thereby increase the range of the bluetooth?
but hey, I am no expert, I roughly took reghacks from around this forum and put together a cab file, I tried to make the cab to produce the best sound availible to a monoheadset, and nothing more, nothing less.
as it were a couple of weeks ago I since I did this i don't really remember every detail of it, but I believe most of this is stated in the hermes_wiki
I have not installed this yet and have a question. If I'm listening to my Slingbox through my Nokia 900 headset and get a phonecall, will it automatically switch to the phone call or do I have to stop Slingbox? Thanks
CJNYC said:
I have not installed this yet and have a question. If I'm listening to my Slingbox through my Nokia 900 headset and get a phonecall, will it automatically switch to the phone call or do I have to stop Slingbox? Thanks
Click to expand...
Click to collapse
it should switch to the phonecall (mine does anyway) however!! Be aware that the sound will be outputted to speaker when the call ends!
Mic on bluetooth headset
I wanna know if I installed this file to use something like Skype, can I not only hear the sound from my Bluetooth headset but also speak through the headset too?
How do I get back to normal?
Hoping someone could help me out. I tried installing the file above. The installation process went well, but immediately following the soft reset, I noticed that my phone screens and response to menu picks was considerably slower. My phone locks up all of the time, and I am unable to toggle the bluetooth on and off. I tried to uninstall the application, but I get a message at the end saying that it was unable to completely remove the program. Wondering if anyone could help me to get to the registry and change the settings back to normal. HELP!!!!
Works for Vodafone 1605 with factory rom
thanks
Thank you for the cab/hacks. None of the other alternatives worked on my 8525. Now if someone could incorporate this into someway to switch between modes, that would be great. Right now, I install and uninstall the cab several times a day! I get nervous that the registry will get corrupt from all of the install/uninstalls.
Thank you very much!
Hi!
thanks for all the appreciation about my cab! I am happy to see that others are using it and are happy about it
I also noticed that some people has problems with it,
dhenry88: Try and install it again, otherwise, try and revert the setting yourself, I posted the "original" settings a some time ago in this thread, so go get a reg-editor and hack it
because that is all the cab-file does, changes registry (and copies a file to /windows/system32
however, this file is not important for the os itself (because I change the registry to find the changed file, not changing the file and overwriting the original.
but sorry to hear that it had such bad performance on your phone, it shouldn't do anything like that, but hey, every phone is different.
lantern20 said:
Thank you for the cab/hacks. None of the other alternatives worked on my 8525. Now if someone could incorporate this into someway to switch between modes, that would be great. Right now, I install and uninstall the cab several times a day! I get nervous that the registry will get corrupt from all of the install/uninstalls.
Thank you very much!
Click to expand...
Click to collapse
Indeed this is a great little program and I'm very thankful for it. Like lantern, I think it would be great if someone could figure out a way to switch modes easily as I'm unable to initiate a voice call through my Bluetooth headset with this program installed. I too have to install/uninstall the cab many times each day. I’m certainly not complaining, just expressing a wish.
I am using Andots WM6 ROM on my SMT5600 and my phone works better than ever. However, Voice Tags do not work on the phone or over blue tooth. You can create a voice tag but you cannot activate them. Can anyone point me in the right direction to trouble shoot this. I need to know if there is an application that is launched when you hold a button to activate a voice tag? Or, is this a function in the headset or hands free profile? Could it be a simple registry entry I could import from WM5?
Thanks for your help.
Same problem here
I have the same phone & problem.
And I can't charge through USB.
Anyhow, this version improves the typhoon far beyond previous versions. It's faster than wm5, wm5torage is incredible, there are no memory leaks (with wm5 I ended up with 2mb free and had to reboot frequently)
Cheers.
Did you enable USB Charging from Power Management? It's weird, cause by default, its enabled and it works
karhoe said:
Did you enable USB Charging from Power Management? It's weird, cause by default, its enabled and it works
Click to expand...
Click to collapse
Thanks for your help karhoe
I tried to do what you mention, but when I disable USB charging, there is no sign of charging (expected behaviour) and when I turn it back on, the problem continues.
Last night I reflashed to wm5 so I can:
- Check that the phone still can charge through USB (it charges ok)
- Get the font configuration in the registry so fonts look the same in wm6.
- Try to identify how voice tags work and see if I can take some dll/key association back to wm6.
I'll post results!
Mariano
Ok, I'm back to wm6 and I've found the following:
* USB charging works OK... I don't know what caused it. I'm reticent to install wm5storage, maybe it has something to do with it.
* I made the fonts look exactly the same as wm5. This is how:
In the registry, set the following:
\HKEY_LOCAL_MACHINE\GDI\SYSFNT\
CS=0
Ht=4294967281
It=0
Nm=Segoe Condensed
Qt=5
Wt=400
\HKEY_LOCAL_MACHINE\GWE\Button\StFontWeight\Wt=700
\HKEY_LOCAL_MACHINE\GWE\Menu\BarFnt\
WtMUI=700
Wt=700
\HKEY_LOCAL_MACHINE\GWE\OOMFnt\
Ht=4294967284
Nm=Tahoma
Wt=400
Anyway If you have Tahoma in your device's Windows directory some programs will look different.
Finally, regarding voice tags, I could only discover that there are no links like HomeLP.lnk or things like that to call an executable. It must be done some other way. :S
Mariano
With regards to bluetooth voice dialling, ive now got the phone responding to the button by changing oemagw.dll but voice dialler is not launced, it just connects to the phone so you can hear it. Does anyone have a copy of microsoft voice dialler so i could test(an evaluation copy)?
Used this cab to get it this far
http://forum.xda-developers.com/showthread.php?t=308247
I ad to re-pair devices after doing this.
WildDogRob said:
I am using Andots WM6 ROM on my SMT5600 and my phone works better than ever. However, Voice Tags do not work on the phone or over blue tooth. You can create a voice tag but you cannot activate them. Can anyone point me in the right direction to trouble shoot this. I need to know if there is an application that is launched when you hold a button to activate a voice tag? Or, is this a function in the headset or hands free profile? Could it be a simple registry entry I could import from WM5?
Thanks for your help.
Click to expand...
Click to collapse
is this what you wre looking for?
802 said:
With regards to bluetooth voice dialling, ive now got the phone responding to the button by changing oemagw.dll but voice dialler is not launced, it just connects to the phone so you can hear it. Does anyone have a copy of microsoft voice dialler so i could test(an evaluation copy)?
Used this cab to get it this far
http://forum.xda-developers.com/showthread.php?t=308247
I ad to re-pair devices after doing this.
Click to expand...
Click to collapse
Just to note this works now. just delete pairing after cab install, pair again, set as handsfree, itworks over bluetooth.
Thanks!
rickwyatt said:
is this what you wre looking for?
Click to expand...
Click to collapse
Now voiceTag is working fine. Great!
Found a way to enable built in voice tags over Bluetooth.
Ok, I have found a fix to enable built in voice tags over Bluetooth on the SMT5600 with Andots WM6 ROM. Create this registry entry and you will be able to activate voice tags by pushing the action button on the bluetooth headset. I have a new problem though. When you create a voice tag it is not clear and hardly legible. Can anyone help with this?
Browse in registry to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
Create a new DWORD Value and name it “ Capability “ give it a value of “ 37 “ all without quotes. Save and reboot the phone and it will work.
Please let me know if this works for anyone.
Thanks for all the help.
WildDogRob said:
Ok, I have found a fix to enable built in voice tags over Bluetooth on the SMT5600 with Andots WM6 ROM. Create this registry entry and you will be able to activate voice tags by pushing the action button on the bluetooth headset. I have a new problem though. When you create a voice tag it is not clear and hardly legible. Can anyone help with this?
Browse in registry to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
Create a new DWORD Value and name it “ Capability “ give it a value of “ 37 “ all without quotes. Save and reboot the phone and it will work.
Please let me know if this works for anyone.
Thanks for all the help.
Click to expand...
Click to collapse
Thank you SO much!!!
It works like a charm in my UK SPV C500!
You' re great!!!
Help with what file WM6 uses for voice tags
Can someone please tell me what .dll or file is used when you record a voice tag. I am using Andots WM6 ROM on my SMT5600 and voice tags do not work. I want to try to replace the non-working file with a WM5 file.
Or, maybe someone could tell me how to figure out what file/.dll is used. I’ve searched the registry for anything referring to voice tags but I found nothing.
Thanks
Hello, I would like to ask if it is possible to TP2 with HTC and WM6.5 ROM 1.86.401 somehow break in voice dialing via BT in the ear (Nokia BH-105). I've been looking everywhere on the net and forums, but I really did not find anything while I think it's pretty useful thing that works for most MT to BT, so the WM would probably also not be a problem. ... maybe ...
Thanks much
if i understand what your asking, you want a program called Voice command. This will allow you to use your BT to dial contacts & any phone # plus many other things. here is a link to the cab file thanks to "dotcompt"
http://www.sendspace.com/file/8hdfbq
Yes, you understand me well. The program is good but I could not find any commands. When I say "help" so HTC says only some commands. Do you know where I can find others? Thanks
To enable voice commands for Media Player, you must enable a setting found in Settings->Personal->Voice Command (make sure there is an X next to 'Media').