Related
Anyone else having an issue where after the trinity goes into standby maybe 2-3 times you are no longer able to access the minisd card? It still shows it being there.. but if you try to open any files it comes up with errors or will hang before finally timing out. The only way to resolve it for me has been to eject it and reinsert the media. The card works fine in my Wizard so I know it's not the card. The card is a 1gb Kingston Tech.
This dosen't help you anything, but just for information; it works fine for me... I've got a 2 GB miniSD from Sandisk
export800 said:
Anyone else having an issue where after the trinity goes into standby maybe 2-3 times you are no longer able to access the minisd card? It still shows it being there.. but if you try to open any files it comes up with errors or will hang before finally timing out. The only way to resolve it for me has been to eject it and reinsert the media. The card works fine in my Wizard so I know it's not the card. The card is a 1gb Kingston Tech.
Click to expand...
Click to collapse
Maybe you are right and it's not the card, but I have lost count of how many messages I have read in forums about problems with Kingston cards!
I have a 2gb Sandisk card and it works fine I use windows media player with all mp3 files stored in the card so I would have noticed this problem immediately.
thanks for the responses.. I'm going to buy a new card and see if that works better
Problem Solved!
I went ahead and picked up a 2gb transcend card and now my problem went away. Thanks for the suggestion to try another card.
export800 said:
Anyone else having an issue where after the trinity goes into standby maybe 2-3 times you are no longer able to access the minisd card? It still shows it being there.. but if you try to open any files it comes up with errors or will hang before finally timing out. The only way to resolve it for me has been to eject it and reinsert the media. The card works fine in my Wizard so I know it's not the card. The card is a 1gb Kingston Tech.
Click to expand...
Click to collapse
I'm also having problems with my SanDisk 2GB card. Didn't exactly check if the problems occur once it's gone on stand-by a couple of times but yes, there have been times I've had to eject and re-insert it to get it working again.
I'm fairly sure it's a bug and not the card because I've also been using the same card in my HTC Wizard and it's worked fine.
Hope there are some ROM updates soon.
same problem with my 2gb 80x from transcend, the card disappear in file explorer , i have to eject and re insert it too.
I did see it happen once and that was on the first day of use.
hmm.. wierd my transcend 2gb card has been working flawless for the past 4 days.. whereas my kingston 1gb would disappear within a few minutes. Guess it's all in the luck of the draw at this point until we get a rom fix. At least the good news is that Trinity forced me into upgrading to a 2gb card which I wanted to do anyway. So I'll give the phone credit for at least that
Initially I had the simmilar problems with my Sandisk 2GB card.
Then I discovered that PocketMax Phonealarm 1.57.00 caused problems. After I went back to Phonealarm 1.56.10 everything worked fine again. The most recent version of Phonealarm is 1.58.00 but I did not try that version yet as 1.56.10 works fine for me.
To see if your Phonealarm is causing problems just try to uninstall, softreset and use your device for a while without Phonealarm.
Since I have never used Phonealarm I'd go for a bug.
I have a Trinity and I noticed this problem with every program or data stored on my 2gb card.
Here is my conversation with the HTC support team :
Q : "I have a serious problemn with my new p3600 : each time it resumes from stand-by mode, the micro sd card is not recognized anymore. The result is I can't use my GPS software or any program installed on the card, nor any program can access to system files or music.
WHat can I do to fix this rather bothering issue?"
A : "Dear Mr. Simon,
Thank you for contacting HTC Europe support.
With regards to your query, there are no known issues with this device and storage cards. I would however advise you that these devices though they may work with 4GB cards are only tested with 2GB cards. If your SD card is over 2GB i would advise trying a smaller one.
If the card is 2GB or smaller,you may wish to try a hard reset or a different make of card.
Failing that the contact details below are for your relevant repair center."
If anyone has a hint on this issue, please let us know because it's rather disappointing for such an expensive device.
cadarn said:
If anyone has a hint on this issue, please let us know because it's rather disappointing for such an expensive device.
Click to expand...
Click to collapse
That sure was a disappointing reply from them. I'm pretty sure their tech department is aware of this and its just their support staff that aren't informed of these things.
Anyway, time to play the waiting game.
Had this issue with my 1gb kingston card but the problems occured more often when i was installing and uninstalling apps, with the 2gb from Sandisk at the moment no problems.
fluke said:
Had this issue with my 1gb kingston card but the problems occured more often when i was installing and uninstalling apps, with the 2gb from Sandisk at the moment no problems.
Click to expand...
Click to collapse
No problems with my sandisk 1GB card.
I have used a kingston 2gb card for about two weeks now and I do not have any problems whatsoever with standby and this brand of miniSD
I had the same problem initially with a unbranded 2gb mini-sd purchased from ebay. I purchased a new 2gb Transcend and no problems yet.
Be Cereful with HighSpeed New SDHC Transcend
Good Morning,
It appears that the transcend card you refer to does not work in our p3600 device. Therefore it seems that the P3600 does not support SDHC cards.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/cs_by_phone.html
Best regards,
HTC Support
[email protected]
http://www.htc.com
I just bought a sandisk 1gb and haven't noticed any bug since. Therefore it means the Trinity doesn't like no name cheap memory cards.
At last, I can make the most of my little wonder!
Has anyone tried with the sandisk ultra cards?
I have an Ultra Sandisk 2 GB and it works like a charm on my Trinity. However, I recently used the Pocket Mechanic 2,23 and it screwed up my mini sd and warrented a format from my laptop following the defragmentation of the card through Pocket Mechanic. It is reported that Pocket Mechanic screws the sds if you use them to mess/ format or defragment the cards. I reinstalled everything with the exception of PM and now I have no problems.
Regards,
Gilbert
SD/SDHC Memory Card Formatting Software
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
Dead...
jmermel said:
SD/SDHC Memory Card Formatting Software
http://panasonic.jp/support/global/c...formatter.html
Click to expand...
Click to collapse
The link seems to be dead
Link is active now.
Link is active now.
anyone used this?
Is it really necessary?
I had a 4Gb card from Moby Memory- it randomly corrupted data. I couldn't work out if it was the OS, the handset or the card causing problems, but assumed it was the card. They refunded me no problems.
I now have a 1Gb Crucial card- no problems so far. (fingers crossed).
The Trinity does seem to be a bit fussy with spotting cards when you insert them (well mine does!)
Need
Brother Please Help Me
I Need
SD/SDHC Memory Card Unlocker.
I really need a 4GB or more sd card.
I have searched and searched for a solution but there seems to be no clear answer. It would seem that some Trinity users are able to use 4gb and 8gb micro cards with adaptors, but others end up with problems after soft resets, such as the device no longer seeing the sd card, or files becoming corrupted.
SO.... I ask you all:
- Can the Trinity reliably use a 4gb micro card with adaptor?
- Is there a fix or download that actually works to achieve the above?
- If not, is there such a thing as a 4GB mini sd card (not sdhc or micro)?
I have tried using a 4gb micro card with adaptor and after soft resetting my Trinity either fails to see it or the sd card became corrupted. I have read many similar stories and experiences. However, My Tomtom maps are nearly 2gb, so I need a 4gb card at least!!!
I see other xda members using 4gb and 8 gb cards. Please, HOW are they achieving this?
Thanks,
Mattster.
hi Mattster,
best way I can hopefully help to answer your questions is:
1. I have used cheap Sandisk 4 gig micro sd's with adaptor in a few Trinity's with no problems at all.
2. there are 4 gig min Sd's out there - see ebay item 260468007473
3. disregarding that cards usually come ready formatted, I always format myself before use anyway.
I have used the Panasonic Formatter (ver 2.0.03) for some time and it works for me.
carkev said:
hi Mattster,
best way I can hopefully help to answer your questions is:
1. I have used cheap Sandisk 4 gig micro sd's with adaptor in a few Trinity's with no problems at all.
2. there are 4 gig min Sd's out there - see ebay item 260468007473
3. disregarding that cards usually come ready formatted, I always format myself before use anyway.
I have used the Panasonic Formatter (ver 2.0.03) for some time and it works for me.
Click to expand...
Click to collapse
Hi Carkev.
Thanks for the advice.
I have looked at the 4GB mini sd. It's from Hong Kong and he has sold "4" to date, so I may wait a little before getting one.
Some Trinity's seem to accept 4GB micro's with adaptor, some don't. The search for the reason or solution has tired me out, so I'm sticking with my 2GB for now. I only needed it for my European Tomtom maps (2GB!) so I'll just stick with UK and Ireland.
Thanks for your reply,
Mattster.
shaahedrazib said:
Brother Please Help Me
I Need
SD/SDHC Memory Card Unlocker.
Click to expand...
Click to collapse
Did you get a solution? If yes, please let me know.
Hi guys!
I've read several threads here regarding which cards work and don't work in our machines. One of the main threads is ridiculously long, and describes various reg hacks that do NOT solve the problem.
In my opinion, there is NOTHING worse than a PDA that needs to be rebooted every day or several times a day.
I am starting this thread just to bring the basic information into one place.
I can tell you right now:
I have two 2GB Sandisk MicroSD cards, and one 512MB card.
Not surprisingly, all three have problems in two 8525 devices, with two different WM5 ROM.
I know that the 1GB Made in Japan Kingston seems to work flawlessly.
Can anyone else please share their experiences in this thread? Let's keep it nice and clean, so that people wanting to understand what works and what doesn't.
How are the 2GB Kingston cards? Anyone have any luck?
I have used the SanDisk 2GB with no known issues.
I also have a 2g Sandisk with no issues over nearly 11 months.
I'm not sure you will prove much here as I have seen folks who swear Sandisks are bad and Kingstons (typically 2gig) are flawless. Equally I have seen exactly the reverse views reported. It may have more to do with physical connections (contacts) between device and the card.
But lets see how it pans out.
Mike
bkeenan said:
I have used the SanDisk 2GB with no known issues.
Click to expand...
Click to collapse
I have as well and love it. Only issue I have is getting the little sucker out! I just leave it in. The only way I have found to get it out is by opening the back, and using an eye glasses screw driver to slide it out.
sandisk 2g and 1 g here and no issues with either work perfect. um you do know if you push it in it releases the catch and it pops out like its suppose to right?
austinsnyc said:
sandisk 2g and 1 g here and no issues with either work perfect. um you do know if you push it in it releases the catch and it pops out like its suppose to right?
Click to expand...
Click to collapse
If only it was that easy. For some reason, mine doesn't do that. I push in, it doesn't pop out
Not AKU2.3?
Hands up those of you who have microSD card problems with AKU2.3 ROMs!
Using a SanDisk 1Gb here no problems. Also using WM5 Build 14955.2.3.0, which is AKU 2.3 is it not?
Mine is the HERM300 (MDA Vario 2).
help
hi I am usin 1gb kingston with hermes.and its speed is too slow like 30kpbs via wm5 storage.I think I need to format my card correctly.any help?
and can any body tell me any tweak to have programs install on folders of my own choice?
thx in advance.
it is a pleasure to write from hermes .....hehe
Kingston 2GB made in Taiwan
Often not responding after loading for a few times. Need to be inserted into the device again.
Toshiba 2GB made in Japan
No problem until now.
Wow, I've got something different!
1GB Corsair MicroSD in my Imate JasJam.
Worked flawlessly for 6 months until I became the new owner of both phone & card, it then had card detection issues for a couple of days, but came good on it's own.
Now on WM6 and still working fine. I'm wondering if larger than 2GB cards will work.
Cheers! Oggy.
I purchased a SanDisk 4gb microSDHC and it DID NOT work!!!
I am now back to using my 2gb A-data microSD (which works fine).
No problems with my A-Data MyFlash 1GB, although once or twice I did have to use a tweezers or a needle to extract it. Just FYI, I bought my card on NewEgg.com, and people there usually leave feedback on if the card worked or not on their particular mobile device.
Very interesting.
So it looks like some people have 2GB Sandisks with NO problems.
Mine pops in and out quite nicely, actually. Although on my dad's unit, you need a tweezers.
Typical......!
jeffreyj900 said:
If only it was that easy. For some reason, mine doesn't do that. I push in, it doesn't pop out
Click to expand...
Click to collapse
I have a 8525, had that issue on day 1 and it was driving me crazy. then I thought let's put a needle down there and see what happens!! the thing lost its virginity, now pops in & out just fine
BTW I have Sandisk 2GB microSD card (Made in Taiwan) which works fine, I just have to eject and reinsert it in sleep mode.. else i'll have to SR so that the device would recognize it.
micro SD not reading
My unlocked M3100 has stopped seeing the storage card - nothing wrong with the card (tested elsewhere), and it used to work (on M3100). How might I rectify this?
juann said:
My unlocked M3100 has stopped seeing the storage card - nothing wrong with the card (tested elsewhere), and it used to work (on M3100). How might I rectify this?
Click to expand...
Click to collapse
Check this thread.
http://forum.xda-developers.com/showthread.php?t=294324
Mike
My SanDisk 2GB Taiwan card would disappear every other day or so. It wasn't a huge problem as I'd just have to pop it out and push it back in to get everything working again, but I needed another microSD card for another device so I bought a Kingston 2GB hoping to get a Japan card. I ended up with a 2GB Kingston Taiwan card, but it works just fine (a month now) without disappearing *knocks on wood*
Michael_514 said:
I know that the 1GB Made in Japan Kingston seems to work flawlessly.
Click to expand...
Click to collapse
I have occasional problems with a 1GB Made in Japan Kingston, so I have to disagree with your statement.
I am convinced that this problem is hardware related. Either a connector fit problem as Michael Channon believes, and/or a motherboard problem as I believe. Earlier Hermes motherboards were manufactured by Hitachi, HTC now uses a different supplier for their motherboards. Rumour has it that the Hitachi mobo's have a problem with the mSD card hardware (could be the same problem I s'pose).
John
Sandisk 2GB card
I also have a Sandisk 2GB.
It had trouble ejecting the first few times and I had to use tweezers or the tip of a razorblade to get it to slide out but after a very short time it started moving normally.
My 8525 does lose site of the card from time to time and I sometimes have to re-insert it several times before it is recognized but I have not had to reset the phone to get it to come back.
Hi guys! I recently purchased HTC Touch Pro and A-data 8 Gb micro sdhc class 6. My laptop recognizes the card and I format it to FAT 32, so I think the card functions properly. The problem is that the device does not recognize tha card. I updated the ROM with the latest official release from the HTC site , and I was happy finally to see my card. The problem is that after restart, the card is invisible again. Can anyone help me? Maybe the storage card is faulty after all?
Possibly man, i am sure you have another card in there. Test it, if all is ok with it, then exchange your 8GB if possible....
The same thing happened to me; I don't know if it's faulty though. It is recognized at first, and of course I can transfer files from my laptop.
The same thing happened to me; I don't know if it's faulty though. It is recognized at first, and of course I can transfer files from my laptop.
incompatability with SDHC
There is a known partition problem that can destroy your Micro SD (or any other size SD) if you every stuck it into an older reader that does not support newer sizes (any HC, or even standard SDs over 1GB).
Old readers can show your newer SD-family cards, and APEAR to work, until you fill them up past the size the old reader supports.
FOR EXAMPLE:
my old laptop has a built-in SD reader. Back when I used the HTC Wizard, I bought a 2GB miniSD, and dumped files to it from my laptop. Little did I know, the built-in reader only supports SD card up to 1GB. It worked back and forth many times untilI crossed the 1GB line (filled teh SD past 1GB). Then files disapeared or could not be accessed randomly. Kindgston told me it was a known issue of some older devices (readrer/camera/etc): the older device messes up the partition, which you CANNOT fix yourself: reformatting the messed0up partition does nothing. Ship back to manufacturer to fix. Now I'm careful to avoid the built-in SD reader
So I would advise: fill your microSD up aver half-way, and see if you desktop/ laptop has problems accessing files sampled from all over the chip. If it does, this is probabaly your problem.
I think it's just the card/brand itself. The HTC site lists card brands and sizes that have been tested and proven compatible, and the A-Data 8GB isn't one of them (although the 4GB SDHC is compatible). Sandisk is the only 8GB card that's supposedly compatible, and I've pretty much found that out since I had no luck with an A-Data 8GB but the Sandisk works flawlessly.
When I first copied files over to the A-Data and put it in the phone it didn't recognize it at first, but after a couple times of taking it out and putting it back in I was able to read and write to it in TotalCommander, but when I went to play music files the player froze up solid and the card was no longer readable until I did the in and out thing again. Bottom line was there was no way that card was going to work right in the phone, but as soon as I started using a Sandisk I never had a problem.
same thing happen to me
i think the phone will not recognise class 6 memory card
i will try sandisk 8gb class 2 when i got a chance
silly phone
sdhc card problem
chasist said:
same thing happen to me
i think the phone will not recognise class 6 memory card
i will try sandisk 8gb class 2 when i got a chance
silly phone
Click to expand...
Click to collapse
my touch pro two times had the same problem.The sandisk 8gb microsd HC (class2)collapsed.I can do nothing.My computer doesnt recognize the card.I cannot format it also.Does anybody can help me .What can i do.Thanks.
Card doesn't work in my Fuze. Oh well, I'll find another use for it.
Wierd.... I have two Adata 8GB cards, one works in the Touch Pro, the other doesn't. Both of them work in my Sharp EM One.
hi ive been looking like crazy to fix this problem but this seems to be the only post close to it.
i recently got a transcend class 6 4gb micro sdhc (listed on the website as compatible) for my htc fuze. the fuze (WM6.1) has been updated to the new rom version (5.xx).
i put it in nothing happens. it work fine on a computer (via usb reader). i have a kingston 2gb micro sd that works fine (but is used for another device). I really want to get this one to work so its not a waste.
so far ive tried reformatting to FAT, 64K and FAT32, 32K (via windows vista formatting).. none of which work.
really annoying, i dont have any other device that uses this card and i specifically checked this brand and type with the htc fuze and seems like everyone having no probs with it.
any other things i can try? is it a faulty card maybe (but it works through usb reader)?
I am having problems with the 8gb class6 cards as well. I have tried the Adata and the transcend cards. Here are some interesting things I have found.
1. The energyrom series of roms seems to be the only rom that lets me see the card.
2. I can't access the card until it the rom loads.
3. I can flash roms from the card even if I cant access them from the phone.
I did see there was a utility to help load SDHC cards called SDHC_WM6. I was never able to get it to load right but it indicates there is some kind of software driver that might help these cards.
BOBBYDAVIS44 said:
I did see there was a utility to help load SDHC cards called SDHC_WM6. I was never able to get it to load right but it indicates there is some kind of software driver that might help these cards.
Click to expand...
Click to collapse
I saw this utility too.. but its for windows mobile 6 not 6.1.. when 6 came out it had no support for sdhc so that thing came out, 6.1 should have support from the start
of course that didnt stop me from trying it anyway... doesnt work
I have a 8 gb Sandisk- Works flawlessly. I have a 16gb Adata( class 6) that worked for awhile then stopped. Put the 8gb- works, 16gb doesnt. tried different ROM- Still same effect. I has to be the Adata card. I am going to try a 16 gb Sandisk when my funds are available.
Oh- the 16 works fine in the microsd/SD card reader......
SDHC Class 6 works in HTC Jade
I have a jade and both cards that refuse to work with my fuze work just fine with the htc jade. I am not sure if it is a hardware problem or an issue with some software such as the sdhc.dll.
My thought is it is probably software. Why?
First the class 4 cards work just fine. In fact I am currently using a Dane-elec 16gb class4 card.
Secondly I am able to get intermittent class 6 cards access if I use one of the NRGY roms.
I have been using a 8gb Adata card that I bought from newegg, and it has been working flaslessly since november.
I recenlty bought another 8gb Adata from meritline, and this one does not get recognized by the fuze.
I then read in the above posts that somebody used Total Commander to copy files, so I opened up Total Commander, and the card is shown there.
I closed the the program, and now the File Explorer can see the card as well.
Maybe you can try the above steps and see if it works.
edit: actually, I have to plug in and out a few times for the phone to see the card...
I also have this issue with my transcend 8GB class 6 microSD.
HTC Touch Pro (T-Mobile), upgraded to EnergyRom. After upgrade, able to work perfectly. After few hours (the phone of course went into sleeping mode), then the phone was not able to read the card, so starting application installed in it makes the phone hangs.
After a while, the application (10-15 mins) was able to start, then everything is normal again. Very confusing.
At the moment I am assuming it's due to the sleeping mode, somehow the phone (software??) was not able to 'resume' reading from the micro SD.
Note: Previously somehow it clashed with the keyboard mapper software (pro_fuze_keyboard.ZIP), then I uninstalled it, then it was fine. Then I install another version of keyboard mapper (Shlomki TouchPro Keyboard in Fuze ROM.cab), then it's fine again, so I now stick with this mapper. However above issue is still happening.
I read some thread about changing some registry (pnp** set to 8196), so I set it. However still the problem persists.
I haven't tried other suggestion to tweak other registry values. Here's the thread on Hermes device: http://forum.xda-developers.com/showthread.php?t=294324&page=29
I am wondering if it's really class 6 problem. Is there anybody having the same issue with 8GB class 4?
Note: my PC can read the card without any kind of problem.
I put the microSD into N95 also without any problem.
and i have the same problem to touch pro will not recognize my sdhc 4GB class 6, and i have no problems with 4GB class 4.
HI Bobby,
Were you able to get the Transcend 8gb Class 6 work on the HTC Fuze? I have the same problem. I upgraded the rom from the HTC site and I could see it. But later I plugged the card using the adapter to the laptop to copy some files and when I plug that back into the phone, it says "Not Installed". My happiness of not losing 20 buck was only for a couple of mins Any help is appriciated?
Can you give me download link for the energy rom which actually worked with the card?
yukster said:
Wierd.... I have two Adata 8GB cards, one works in the Touch Pro, the other doesn't. Both of them work in my Sharp EM One.
Click to expand...
Click to collapse
I had somewhat of a similar issue, wondering if anyone else has seen this?
8 Gig no name brand MicroSD card in my TouchPro, all of a sudden I had less than 1 gig left, using Resco I couldn't see a thing taking up all that space but it was all gone.
I put the card in the transflash adapter and looked at it on my desktop Windows Explorer and saw the following folders in \Storage Card\Program Files
one directory named (*#LD*))#KDP|} with some text after it
another directory named (#*(Y%*(#(*#*(@#kKD* with some text after it.
NEITHER directory could be renamed, moved, deleted, or anything.
Formatting the card hung the format process.
Finally, I put the microSD card back in my TP and all of a sudden Resco Explorer saw these directories and so I just deleted the Storage Card\Program Files directory (no programs in it) and formatted the card and everything was fine.
Anyone else ever seen this?
My HD2 either doesn't discover the storage card, or loses it after just a few moments.
I have tried two different cards (the 2GB supplied and my 8GB microSDHC).
Has anyone had a similar problem?
Any ideas?
Or is my phone defective.... Help!
^2 options
either storage card is defective or phone is defective...
seems like you did a cross change...
try another storage card on HD2 and try your HD2 storage card on another phone.
then you know which one causes this.
Usually 95% of the cases its the storage card thats defective
My 8Gb card works in my Xperia X1 - the card is a Sandisk Micro SD HC. Whereas the card supplied is a 2Gb Sandisk Micro SD.
Not sure what HC is.
I assume the HD2 can take a 8Gb card - but unsure about the difference in the cards.
graemenwallace said:
My 8Gb card works in my Xperia X1 - the card is a Sandisk Micro SD HC. Whereas the card supplied is a 2Gb Sandisk Micro SD.
Not sure what HC is.
I assume the HD2 can take a 8Gb card - but unsure about the difference in the cards.
Click to expand...
Click to collapse
HC = High Capacity IIRC
The HD2 can take an 8gb card.
The cards don't seem to be faulty (that is assuming that you've tested the 2gb also).
Try a reset/hard boot. I have had this issue before with other phones and that sometimes fixes
indeed SD stands for Secure Digital and HC for High Capacity...
the next generation will be SDXC (with eXtended capacity)...but thats coming 2010 or 2011..
anyway seems like your phone has an issue. Because HTC devices of the last few years are all capable of SDHC memory cards and they support either 16 or 32 GB.
I would make use of my warranty. But before try a hard reset.
Thank you all for the information.
The HD2 doesn't like that 8GB SDHC Card. When in the memory section of the phone, it recognises it, displays it used/free space, then shortly afterwards states no card is installed!
A hard reset, if no luck, I'll return it... fingers crossed.
Crap!
Hard reset didn't work! Why do I always get the duff unit!
I find it strange that it detects the card for a while then loses it...
Sending it back tomorrow for exhange....
thats the only reason I'm not such a big fan of online orders...in warranty cases everything takes a little longer.
but don't be discouraged...worse things happen in life. keep your head up
At least in the UK you are covered by Distance Selling Regulations. Hope you get it sorted soon mate!
Did you try to format your SD card?
I faced a similar situation with Diamond 2 where the SD was faulty until I did a quick format Fat32 and it worked perfectly
faced this issue in my touch hd AND x1. try formatting the card - helped me twice.
Did you install SD tune up? I also had the same problem. I uninstalled SD tune up and reset and storage card was found again. also I installed s2u2 but believe it was the former app that caused the problem.
Ah-haaaaaaaaaaa!
Formating to FAT32 has fixed the problem - thank you all for you help and suggestions.
I also must say thanks to HTC tech guru's too who experimented with various memory cards too.
Now to start a new thread on Bluetooth - Car Kit...
graemenwallace said:
My HD2 either doesn't discover the storage card, or loses it after just a few moments.
I have tried two different cards (the 2GB supplied and my 8GB microSDHC).
Has anyone had a similar problem?
Any ideas?
Click to expand...
Click to collapse
I had the same problem with my 16 Gig card. I made a backup of the card on my pc, formatted it and inserted in my HD2 and from that moment I had no problem anymore