Related
I just got my new Wizard ([email protected]).
As I used Magician ([email protected]) before, there is a smart dial option for the phone.
I can make a call with "ONE Finger" but in my Wizard..I have to scroll all contacts to make a call.
Is Smart Dial option available in others e.g. Qtek, i-Mate...etc?
Can please help to extract this for me???
Many thanks
If you go in the ftp under uploads\kjam you can find the extended rom of this device (imate kjam) that support smart dialing. Inside the extended rom there is a file named Default_SmartDialing_enable_0915_signed.cab. Perhaps this help you.
thanks
BTW, what's the username and password for login ftp.xda-developers.com?
Or....would anyone can help to extract the files for me?
Thanks!!!!!!!!!!!!
Copy the files to your ppc and run then from within the ppc exporer,
then it will be installed, you don't need to extract anything.
I will send you the files tonight ;o)
Thanks guys!!!
I final got the files "Default_SmartDialing_enable_0915_signed.CAB" and install into my Wizard Chinese Version.
But there are no different and no way to enable SmartDialing.
Would anyone can have a screen capture on it or show me how to enable it.
I still need to search thru the whole contact to start a call.
Thanks
Could you please post the file cause i have the same problem on my i-mate k-jam
Thanks
If you have a KJAM you already have smart dial.
To enable smart dial you have to open the dialer (press green button) and then press right softkey to open the menu, the bottom selection is SMART DIALING OPTIONS that enable/disable the function.
Here is the smartdialing cab...I have installed in chinese Dopod 838 (K-Jam) and no effect
I just think the files seems too small...do anyone know is it enough for installing SmartDialing????
Hey, I'm also using Dopod838 Chinese... The quick dial is enabled by default... no need to do anything in addition. When you're in the phone applet, press your right softkey and select "快速撥號 (I)" can setup speed dial numbers. 8)
He's refering to Smart Dialing, not Speed Dial Tse... The file size is correct miko... How did you install it? Did you copy the cab file to your storage card or whatever and run it from there?
One thing I missed, is the O2 Dial Wizard on my IIs.. It let you edit the number before dialing and set carding card prefix etc.. Too bad it doesn't seem to work on WM5 or my Exec
I recommend on using Phoneplus which I realized is suitable for WM5.
I have tried the CAB file and it is not working, too.
Anyone successfully run Smart Dialing on Dopod 838? I miss this application very much! :roll:
I found the CAB file actually only activate the smart dialing, which does not contain any program file. The program files should already installed in the K-Jam default ROM.
So I think the smart dialing will be able to run in Dopod 838 by copying the following files from K-Jam devices:
- \windows\phcanhtc.dll
- DPadMenu.dll
Anyone can help? :wink:
This is the Smartdialing program i used for XDAIIs before, u can try to install it into the 838, please give result after try.
Thanks Vincentfung for the file. :wink:
I have tried to install the cab. However it doesn't work nor have any change to the dialer. I think it is for WM2003SE. So... we need the WM5 version of Smart Dialing that found in English K-Jam or English Dopod 838, or maybe Universal...
This one is on my device, and it should work ?
qtek9100 / Vario
Hi folks,
I made a "German Language Pack" (cab), which makes some german features available. See below
I am also working on a french version but I do nt have the french dictionary file for spell checking (mssp2_fr.lex) nor a french table for áà,... (sym.txt). If anyone could pm it to me I would be happy to update the language pack. Until then spell checking and symbols are as original only...
How-To:
1. download zip-file and unzip
2. copy cab-file to PPC
3. execute cab-file.
4. Softreset device
More information on the changes to registry and the included files are in the enclosed inf-file.
This tool was written for the Wizard device, but as the only Wizard-specific things are the settings for the hardkeyboard there shouldn't be any complications with other devices running WM5.
If anyone has suggestions for improving my little tool I would be pleased, if you could tell me!!
Hades.
new version with autocomplete feature added.
Still working on softkeyboard... - any suggestions?
hi hades,
does your little localizer work with the new aku2-roms? i have a himalaya aka xda2 with tofclock's 2.01a64wwe rom which is aku2. thanks for any info.
peter
i cannot report for any Himalaya images as using a Wizard (i-mate ROM 2.16). But the little tool does nothing system-critical. It only adds a view files and changes some registry settings, which are pointing to these files or concerning language settings. Therefore it should work with any WM5-device and -ROM, without interfering with any other abilities. I guess the settings concerning the hardkeyboard will just be ignored if the device does not have one.
For further information on all actions taken by the tool, please have a look at the enclosed inf file.
Hope that helped!
Hades.
transcriber doesn't work any more
I've just installed your french language pack on my Dopod with the latest Dopod rom 2.15.13.27 WWE and the transcriber doesn't work any more not in French neither in English. I get the message: Une erreur est survenue lors du chargement du moteur de reconnaissance de fichier.dll Vérifiez le chemin et la quantité de mémoire disponible.
I've followed your instructions and installed it successfully but I then got the message that the program was meant for an older version of WM and that maybe it would not work.
Is there a way to uninstall it without messing with the registry? My problem is worsened by the fact I can't manage a hard reset. I tried everything holding down the power button with the stylus in the small hole, sometimes also holding down the camera button at the same time, sometimes with the device turned on and sometimes turned off. No way, impossible to hard reset! Please help me, and thank you anyway for your work. I was very excited and I am now very disappointed.
yes it's a good idea
thanks
sorry 'bout that. I wasn't able to test the french language pack myself. I have overlooked the file and cannot imagine why it shouldn't work as it is similiar to the german one which is working quite well. Information on the changed registry settings are in the enclosed inf-file.
But anyway you should be able to uninstall it with the WM5 built-in uninstall feature (Settings --> System --> remove(?) programs). Perform a softreset thereafter by long pressing the standby-button (not digging the reset hole!)
To Hard reset your device you have to press and hold the comm and voicedial buttons simultanously, then press the reset button (small hole) with your pen, while still holding the other two buttons for a while, until finally you are questioned if you wan to completly delte your device. You have to confirm by pressing the green button. Make sure you have a bakup - I'd recommend SPB Backup.
Well, once again sorry.
Hades.
Thank you again for your kind answer. Actually I had to reflash my rom cause I couldn't do any hard reset. I was stupid not to think of removing the program first, since I didn't think it was a "regular" program. You mention the comm and voice dial buttons as two different buttons but actually on my Dopod it's only one button. Did you mean then the power and voice dial together, which coud make sense and which I didn't try cause nothing like it is mentioned in the user guide. Do you think I could have got the problem with your program because I used the stylus in the hole to soft reset my device after installing the french package. It is the procedure mentioned in the user guide for soft reset, contrary to what you tell me now. Thanks again
oh ok - I was assuming you have a HTC Wizard (don't know the dopod model number). If it's not a Wizard I have no idea how to hardreset it. But I hope you're using WM5, for my little utility is for WM5 only.
If you do a soft-reset after a change of the registry using the reset-hole the changed settings may not be stored on your device. That is because the registry-file is not immediatly updated after the changes, but stored in a temporary space and later (who knows when!) written to the file. So if you reset it by hardware-button the changes are still in the temporary space and therefore gone after the reset. If you do the reset by using software-reset function (provided by e.g. SPB Pocket+ or magicbutton) or simply switch off the device using the standby-button, the temporary space is written to disk before shutting down. That's it.
À bientôt,
Hades.
P.S.: I updated the language pack, cause I found a minor difference to the german one. (Compare inf-file) But I can't tell, that that was the problem.
My Dopod is a 818Pro with WM5, so it's a Prophet and practically the same as a Wizard, as I've seen in the forum. What you say about soft reset is very interesting since I haven't seen it discussed very often in this forum and i searched it quite thoroughly. Have you tried removing your program through the regular WM5 procedure? You seem to imply that the registry was not changed after my soft resetting with the hardware button, but it seems strange to me since after resetting I got the french warning I mentioned in my first post, and it was the first ever message in french from my english speaking device! Some change had definitely occured in the registry or somewhere else. Thanks again
well. I tried to remove and it worked. Concerning your registry I don't know wether it was changed or not. Depends on many things, I think.
Sorry,
Hades.
I've just installed the German package on my Himalaya device with English AKU 3.2. It works Thank you Hades!
hello Hades77
Actually i successfull changed hardware keyboard but also spellcheck, dictionnary (i think even T9 but i'm not using it) and special characters to french and it's compliant with 3.2 rom(thanks faria). As i can see you package does not include those feature yet ... Are you interrested in getting those files and including them into you cab ?
thanks a lot!
Hello hedes,
i just installed your german cab! it seems to work perfect on my phone.
THANK YOU VERY MUCH FOR THIS, IT MAKES LIFE EAYSIER WITH WRITING WITH AN ENGLISH ROM
Hi,
Is there an spanish version for TyTN?.
Regards,
Taguapire.
Hi , i was wondering if there is way (something like a tutorial) that I can build my own language pack?
I have a Wizzard (Qtek 9100) with the original QTEK rom (in Greek) and I am trying to fit Faria's 3.2 ROM in my PPC but i Need Greek Language pack . Is there any way you can help me with that?
thanks in advance
new ROM
I tried to install your german language cab, but it doesn´t work. I got the new ROM from Faria ( http://forum.xda-developers.com/forumdisplay.php?f=259).
Now i donn´t know how to go on.....
Thanks for help
Well, after I installed it, it doesnt default to Xt9 any more when I go to new messages
Sweet!
can't find this, can you send the link?
this is fantastic!
what ROM are you using ? will this work with any ROM (and ROM language) ?
i would appreciate the link also!
here is the cab file, it's actually just a registry setting fix.
HTC-DUAL-TOUCH-XT9-TO-ABC-FIX
The registry concerned is:
Code:
[HKLM\SOFTWARE\Tegic\eT9\IME]
CarrierDefaultTextMode=dword:0
(0 for ABC / 1 for XT9)
A friend gave me this link as I am also having a problem with the HTC site.
Enjoy!
oh my god it works !!!!
i cant believe how simple that was !!! thank you so much for the registry entry, i can use my phone to text again !!!
it's great!
this was the most anoying thing on my new dual.
tx a lot,
pirlone
Doesn't work for me
in fact it screws my device up!.. it shows the ABC being as the default input, but I can only type the first letter in each key, multiple presses just repeats the same letter
I guess I will have to reflash the OS.. otherwise I now cant use the text input on the keypad anymore!
works on mine. thanks, dtm for letting me know about this.
Maybe doesnt work on mine becos Im running the WM6.1 Nikki project OS ??
Anyone else that has installed this using this Version?
Can you help me? I am begiiner having Dual 2 days. XT9 is really anoying esp for NON english users.But I cannot fix it as it is described. Can you show me step by step what to do? Thanks
It does not work for me!
muzikfreakah said:
Well, after I installed it, it doesnt default to Xt9 any more when I go to new messages
Sweet!
Click to expand...
Click to collapse
Please help me. I am a new user having Dual 2nd day. I was trying to install it but it does not work. Can you describe step by step for the beginner what to do? XT9 is realy anoying esp for NON english users.
Hi, just copy the cab to the phone and install it. Maybe you need to softreset your Niki. (open the battery case, the reset button is left to the USB connector).
Cheers
Michael
I love this and it is working well for me. My only issue is when using the touch keypad software, when you type it highlights the letters and take a few micro seconds to move to the next so if I am typing a sentence, and press space,it deletes that entire word or atleast the last few letters that I typed :-( So the only way to solve this is not text that fast or use the hardware keypad.
Wow I noticed so many people reposting this when this was posted a long time ago.
Anyway, just wanted to confirm this is working on my wifes elf also
Finally there's something to kill XT9
Change Mode from ABC to XT9 or XT9 to ABC.
Hey everyone!
First, I wanted to start out thanking muzikfreakah for the link to the .cab file and the posting the Registry path that needs to be modified. I used these as a base reference for the work I completed on my phone. Instead of wanting to go from XT9 to ABC, I wanted to change my phone from ABC to XT9.
Initially I used PHM Registry Editor to make the necessary change to the Registry value you noted. Shortly thereafter, I updated my ROM to WM 6.1 so I had to reapply the settings manually. This got me thinking. Why not just create a quick .cab file for myself, saving me time in the future. This is exactly what I did!
Attached are two .cab's I created a while back (just never got around to uploading them). The first .cab (SP_Default_ABC_To_XT9.cab) modifies the appropriate Registry Key, setting it to 1 (defaulting to XT9). The second .cab (SP_Default_XT9_To_ABC.cab) does just the opposite, changing the value to 0 (defaulting to ABC).
Final notes before I part -
File Sizes: The file size of each of my .cab's is 1.07 KB, as it only contains the necessary Registry Key change. The link muzikfreakah provided brings you to "HTC+Touch+Dual-default-ABC.cab". This file size is 20.76 KB, as it appears to use a more complex method of making the necessary Registry changes.Company and Application Name: After my .cab is installed, it will display in the Installed Programs list as "Seth_Polley Default_XT9_To_ABC" (or vice versa depending on .cab used). After installing the other .cab (HTC+Touch+Dual-default-ABC.cab), the following is displayed in the Programs list: "Customization Customize_Tool".
In summary, either file will work for changing from XT9 to ABC. While 20.76 KB is nothing by today's standards, you can go smaller yet by using my .cab's (about 1/20th of the file size). Additionally, my .cab's provide a more descriptive name in the Programs list. Pick your poison! To 'install' the Registry modification, simply move the .cab to your phone, execute it, and follow the prompts.
Feel free to PM me if you have difficulties accessing/downloading the files. If you are concerned about using my files, feel free to open the .cab (can use an application like WinRAR) and review the contained "_setup.xml" file to verify this .cab will only make the changes I noted above.
Best Regards,
Seth
[Verizon HTC Touch (xv6900), currently running WM 6.1]
-=-=-
muzikfreakah said:
here is the cab file, it's actually just a registry setting fix.
HTC-DUAL-TOUCH-XT9-TO-ABC-FIX
The registry concerned is:
Code:
[HKLM\SOFTWARE\Tegic\eT9\IME]
CarrierDefaultTextMode=dword:0
(0 for ABC / 1 for XT9)
A friend gave me this link as I am also having a problem with the HTC site.
Enjoy!
Click to expand...
Click to collapse
Thanks ))
Thanx Man, I´ve searched this simple thing so long time...
Cheers Mate!!
I can now send SMS's again after unlocking!!
Simon
hi,
i have a imate pda2k with qwerty keyboard.
wm6 doesn't recognize special characters like "." "@" "," and others.
with my old wm2003 i had to install after an hardreset a special cab to solve the problem.
i have tried this cab also in wm6 but without results.
does a fix exists ?
ok i have found the right solution before posting my question here,
http://forum.xda-developers.com/showthread.php?t=365832&highlight=qwerty
but i forgot to tap "exit" at the end of registry edit. so i have not saved the new registry key.
sorry
Folks, I am trying to launch the soft keyboard alongwith an application. Can you tell me what to add wit the exe file for the keyboard to appear.
thanks.
*******sigh*******
anyone?