Can some one upload the phone ringtones comes with the Dopod new ROM.
I had the Dopod rom and now i upgraded to the HTC rom but there was more ringtones in the Dopod ROM i want to use.
Thanks
Just tell me where can I upload it and I will do it, I have a dopod rom
Cheers from Portugal
same request
could you tell me where find these rings??
many thanks
You can zip them and put it here in the post. Just click the "Post Reply" button and in the bottom you have button to add attachments. jsut zip all the ringtones to one zip file and add it to this post. you can upliad up to 8MB for zip file.
Thanks
....but where find these files???
thanks a lot for any help
Here is all the Dopod sounds i found on dumped rom...
Thanks
I installed it and restard the phone - but in the phone setting i don't see the Dopod rings but in the windows folder in the file explorer they are exeist. Do You know why i can't see the rings in the phone settings?
Thanks
I make a fix for the calling ring's..
Just rename the Dopod_ring_Sounds.txt to Dopod_ring_Sounds.reg and put it in your ppc and with your favorite registry explorer add in your registry after that should be work...
Thank's
Thanks - it works
Low sound level
When I installed the sound level was much lower. Is there a fix ??
I really love this tone as it's so loud. Most importantly, people close to your phone will remind you again that you have a message, whether you are next to your phone or not!
Your iPhone tingtones are set either in the settings tab or via theme manager.
In order for you to use your own ringtones, you have to download&install an iPhone theme/ringtone application into the iPhone and than you the option given byt the application.
Related
I have just upgraded my XDA II to
Rom: 1.60.00WWE
Radio: 1.06.01
Ext Rom: 1.60.21
Since this update all my custome ringtones (.mid) ring at full volume when a call comes in or when i playback from the menu to select a ringtone. However the default ringtones play at the volume level set in ring volume properties.
Can anyone shed any light on this issue for me please...? :?
dunno the answer mate but....
why choose midi tones over wav or wma tones?
its like choosing old beep beep tones over polyphonics lol.
get some propper tones instead of polys lol
thanx for replying...
the midi tune i have very good and i do really want to keep it.
when i didnt get any other posts re my problem i continued to investigate. i have discovered that the problem is somewhere in the dangaard extended_rom. if i use the o2 extended_rom i dont have this problem.
the thing is i dont really want to use the o2 rom and would like to keep my xda as generic as possible, as i am not with o2.
do you know what part of the extended_rom contains the comonents for the ringer? i though it may have been the midi.sa.cab but sadly not. i dont really want to have to go through each one and doing a hard reset each time i want to try the next.
any thoughts?
try installing the o2 rom again and go into the file explorer on activesync and copy everything off the device into a folder on your pc...
install the other rom and then try each one ect... that way you wont have to keep going back and forth through the roms
sorry mate i dont ahve a clue
gaz
this is what i am doing at the moment. i want to keep as much of the qtek rom as possible and only use the o2 rom for the part that it causing for the ring tone to be stuck at max volume.
any guesses which .cab mad have the sound file? i will just try them one at a time. i will post my results for any future user with the same problem.
I'm Curious also....
Let us know what your findings are :roll:
Well i have solved the problem. the problem was the camerarc131_WWE_1.5.sa.CAB
i used the o2 camera_WWE.sa.CAB instead and the problem didnt reoccur.
i hope thats the last time i have to hard reset my unit...
I just wondering if you guys has the similar problems with me or not ....
I've done registry hack for changing the default storage of rings to \storage card\rings, occasionally the ringtones will automatically change back to "windows default". I've check that my O2 mini able to play the selected tones. After a while, when i suspend it or soft reset, it will change back to "windows default".
Does anyone has this problems ? Is this because of my SD card speed ? I got a 256mb Kingston SD which is included from the package.
Your help and comment are appreciated.
Thanks :wink:
Ringtone back to default
If you installed pocket player.. try to uninstall it...
Hi,
You dont need to uninstall pocket player. Just go to pocket player options and remove the file association. This should solve your problem.
Regards,
Vishal
hi... i dont have or ever installed pocket player but hansip's problem is happend to me aswell... anymore idea how to use our own ringtones without have to copy them to the windows folder?? thank you
I had the same problem...
and the solution was not to change the path to \storage card\rings...
instead.. you have to make it \storage\....\Rings and this will certainly work :wink: .....
I believe there is some sort of conflict when you choose Storage Card
I know you won't be able to use all of your music... but at least you'll free up some memory from the RAM..
and if you have the BigStorage trick.. you'll be just Fine..
I have three ring tones in my Rings folder.. and I think that's enough for me.... 8)
cheers
After coming out of suspend mode or after a soft reset, the Magician needs some time to initialize the SD card. Since the programs, including the phone settings, are run before the SD is initialized, the Magician cannot find the ringtone on the SD card and therefore resets it to windows default. It does not matter wether or not you have a fast SD card, it is a flaw in the operating system. That is also the reason why today plug-ins are better run from main mem or internal storage than from SD card. Try putting the ringtone in your internal storage, you'll see the difference.
erwinsie said:
anymore idea how to use our own ringtones without have to copy them to the windows folder?? thank you
Click to expand...
Click to collapse
just hold the stylus on the music file you wish to make as a ringtone, until you get the pop-up menu, then choose Set as Ringtone
cheers
Not really. First of all you need a special .cab file for that, which you can find attached at the end of my post.
Second, that just copies the ringtone in Windows/rings, thereby taking up valuable RAM, which he wants to evade.
Koksie said:
Not really. First of all you need a special .cab file for that, which you can find attached at the end of my post.
Second, that just copies the ringtone in Windows/rings, thereby taking up valuable RAM, which he wants to evade.
Click to expand...
Click to collapse
Thanks for the input guys .... I solved this problem by changing it into \storage\rings instead of put in on \storage card ..... Well I guess, the reasonable explanation for this is because when the phone rings, the device is trying to access the rings into the location that we specified in the registry and i guess the process get too fast .... So the device having a difficulty reading the \storage card ... and that's why it straight goes to "windows default" cause of course that's ring store in internal memory :wink:
By the way I'm just curious what's cab file does Koksie provide us ? Could you please explain more on this cab files ? What it actually does for our Mini ?
Thanks again guys for the input..... :wink:
I am having this problem after swtching directories too but it is not fixed after changing the registry to /storage/rings, /storage/.../rings or even windows/rings. They all go back to the default ring!!!
Please help !!
Thanks!
hansip said:
Koksie said:
Not really. First of all you need a special .cab file for that, which you can find attached at the end of my post.
Second, that just copies the ringtone in Windows/rings, thereby taking up valuable RAM, which he wants to evade.
Click to expand...
Click to collapse
Thanks for the input guys .... I solved this problem by changing it into \storage\rings instead of put in on \storage card ..... Well I guess, the reasonable explanation for this is because when the phone rings, the device is trying to access the rings into the location that we specified in the registry and i guess the process get too fast .... So the device having a difficulty reading the \storage card ... and that's why it straight goes to "windows default" cause of course that's ring store in internal memory :wink:
By the way I'm just curious what's cab file does Koksie provide us ? Could you please explain more on this cab files ? What it actually does for our Mini ?
Thanks again guys for the input..... :wink:
Click to expand...
Click to collapse
The cab file will enable you to set mp3 as ringtone when you hold to the file.
DanielHochman said:
I am having this problem after swtching directories too but it is not fixed after changing the registry to /storage/rings, /storage/.../rings or even windows/rings. They all go back to the default ring!!!
Please help !!
Thanks!
Click to expand...
Click to collapse
What software do you have eg.. phonealarm, spb, etc, it may cause the error
The .cab I posted enables an extra option in the pop-up menu when you tap-and-hold on a mp3 files. Use the build-in file explorer, go to the folder where your ringtones are stored, tap-and-hold on a ringtone and in the pop-up menu you will see an option "set as ringtone". tap on it and the ringtone will be copied to windows/rings and set as your default ringtone in the phone options. Only drawback: the ringtone will be copied into main mem, taking up a lot of space if you have a full sized mp3. If you shorten it to 10 seconds and decrease th quality, it should take up less space. I have no idea if hacking the registry to make storage/rings the default ringtone location will work with this .cab. Maybe the .cab only looks at the registry for the default location and copy it there, maybe it just always copy the file to windows/rings.
I have all the sbp software- pocket plus, weather, gprs moniter etc.. also all the PHM software- but this wasn't happening when I instaalled that stuff- it happened after I changed the ring directory-
I have tried chaging it to everything- and it still goes to the default ring!!
thanks,
Daniel
Not only that-
The defaultt ringtone seems to play thru the speaker regardless of whether or not the headphones are plugged in- please tell me I don't need to hard reset!!
Having the same problem here. I have changed the ringtone directory to be
"\My Documents\My Music\Poly" (the same registry hack).
Now, whenever I change the default ringtone to something else, it is done. But when an incoming call is received, the old windows default ringtone is assigned as the ringtone.
HEEELP...
I did a hard reset and it fixed the problem of switching back to the default- I recomend tht anyone who tries this registry hack make a register backup to revert to- soething went wrong-
anyway- I am still having the problem of the rington laying out load when I have the headphones plugged in- is this a standard flaw??
I don't remember having this issue when I first got my Magician...is there a setting to change???
Thanks,
Daniel
I'm also experiencing problems with this but was bale to move the things to the Storage. However, during my experimentation in Photo Contacts, when I do a preview, the default ring tone does not play.
not possible!
hi... according to some ppl that replied to my question (exatcly same with this tread), the answer is WE CAN NOT put ringtones files in SDcard and use them from there.. even we edit the registry.. it works when we preview them, yes.,
BUT
during standby mode, and some1 call us, the window cant find the ringtone fast enough (coz they are in SDcard, access is slow!) so they use the default one..
try to edit the registry to /storage (instead of storage card) then it works. but ofcoz, u must copy all ur ringtone to /storage, now u r using xda memori, not sdcard
dont try to buy faster sdcard, i dont think that will work.. the fastest sdcard is still far to slow for xda... but i any1 success, let me know like you, i have hundreds of ringtones and i dont want to put them in storage...
I found another solution for the problem
I haven't tested the suggested solution while i am writing thsi post (too excited)
check out here
http://www.howardforums.com/showthread.php?threadid=801978
Selecting Ring Tones from your Storage Card instead of \Windows\Rings\
--------------------------------------------------------------------------------
Moving Ring tones to your Storage Card.
Ring tones are choosen from \windows\Rings\.
However, you have to copy your ring tone files there and that takes up
valuable RAM Memory.
Wouldnt it be better to choose your ring tones from your Storage Card, better
still you can place hundreds of ring tones on your storage card without taking
any RAM at all.
Here is how you can do it.
You will need a good file explorer software like "Total Commander"
from http://www.ghisler.com/
1. Run Total commander
2. go to \\ (at the very top)
3. open \\\registry\HKCU\ControlPanel\SoundCategories\Ring \Directory
4. Change the content of this file from
\Windows\Rings to \Storage Card\Rings\
Note: \Storage Card\Rings\ is the directory I created on my storage Card to store my personal Ring Tones.
To select a new ringtone, Start->Settings->Phone.
The Ring tone are now selected from \Storage Card\Rings\
and Best of all, your ring tones doesnt take up any valuable RAM Space.
I hope this helps
Merry Xmas all,
InMind
---------------------------------------------------------
give me feedback if it works, (backup before testing)
CHEERS
mrtnsky (MARTIN)
Every time i send a text message i get a bell and a box come up telling me my remaining credit. This is all very well but i cannot silence this bell. Even if i turn all the volume sliders onto silent and uncheck the play sounds boxes in the sounds settings.
anyone help me get rid of this ?
thanks.
malty
proud new owner of o2 xda mini s
anyone help with this ? i thought i must be able to just delete the wav it uses (notify.wav) but its in the rom and doesnt go.
It's really annoying that even with the vol sliders all the way down and the sound unchecked this sound STILL plays
anyone help ? please !!
I had the same problem with the message sent sound, it really got on my nerves! Just create a silent wav sound in Nero wave editor or a similar application and then transfer it to your wizard's windows directory to overwrite the existing one. sorted!
tried that, i created another notify.wav but cos the original is in rom it wont let me overwrite
ok following a recommendation to use total commander to do the copying, i did, and it worked.
Not sure how, as the original file is a read only file in ROM but nevertheless it worked. Windows explorer using the pc to browse/copy whilst synced wouldnt do it.
Cheers,
malty
My first post in this incredible forum, I have all ready found so much help here and are most thankful, please keep it up.
Is it possible to make your own message sounds and use them when recieving text messages etc.
If possible at all what format should the file be in (mp3 wav)?
Tried with an mp3 placed in the windows folder it seems it cant find it.
Any help would be appreciated.
I'm not an expert so hopefully one will reply, but I think they have to be .wav and I think they have to go in the \windows\rings folder.
cheers
skidoo said:
I'm not an expert so hopefully one will reply, but I think they have to be .wav and I think they have to go in the \windows\rings folder.
cheers
Click to expand...
Click to collapse
Actually, you are 1/2 right, they need to be wavs, but they go directly into windows, not in the rings folder.
Steve
Yep steve is correct the sound file will need to be a .wav and place into the windows folder, ring tones can be mid,wav and so on and they are placed into the rings folder within windows.
Sound file converter???
Morning all,
My first posting also and yes this has to be the mecca for knwledge of all Wizard related things. My question:
Does anyone know of any software downloads which can convert .wma, mp3 or similar files into .wav??? I'm a complete novice at this sort of stuff but the array of ringtones and message alert tones is rubbish on my K-jam. Thanks for any replies.
Del.
Re: Sound file converter???
manindesert said:
Morning all,
My first posting also and yes this has to be the mecca for knwledge of all Wizard related things. My question:
Does anyone know of any software downloads which can convert .wma, mp3 or similar files into .wav??? I'm a complete novice at this sort of stuff but the array of ringtones and message alert tones is rubbish on my K-jam. Thanks for any replies.
Del.
Click to expand...
Click to collapse
You might try Audacity http://audacity.sourceforge.net/download/
It's a free download. I use Sound Editor in Roxio's Media Creator 8 -- one of the MANY useful tools in that program.
Re: Sound file converter???
You might try Audacity http://audacity.sourceforge.net/download/
It's a free download. I use Sound Editor in Roxio's Media Creator 8 -- one of the MANY useful tools in that program.[/quote]
Thanks very much mate, will give it a go and see the results.
Re: Sound file converter???
manindesert said:
You might try Audacity http://audacity.sourceforge.net/download/
Just downloaded the file.....works a treat. This site is the best, thanks guys and keep up the solid work.
Click to expand...
Click to collapse
Re: Sound file converter???
manindesert said:
You might try Audacity http://audacity.sourceforge.net/download/
Just downloaded the file.....works a treat. This site is the best, thanks guys and keep up the solid work.
Click to expand...
Click to collapse
YW -- (but I'm a GAL -- not a guy)!! LOL!! But, that's ok -- none of my friends can believe how "techy" I am, either. But, I'm the first one they come running to with a problem. Go Figger!!
Cheers all,
You keep refering to ring sounds, I am looking for Sounds for alarms and recieved messages, and alerts in general.
But I will try it now with wav files in stead of mp3.
Manindesert,
I'm using Sound Forge 7, but then again I really need it for all my music stuff, so give Audacity a shot.
Update Works fine with alarm and message sounds, thank you all.
Is there any way, hack or otherwise, that will allow you to point your rings/sounds to your SD card? Thought it would be nice to free some space and stop having to move files on and off the card. I change my ring tone with my mood
Javahater,
I've been loking for a hack/program/setting that will do that, but no luck so far.
Unfortunately, all SMS & ring tones must be located in main memory!
But there's a possibility to create a program that will browse a folder of ring tones on SD card & once u select a tone, it will be copied to main memory (and of course erase the old default tone from main memory) & will set this new file as the default ring tone for the phone.
Javahater and Ezzkht,
Maybe you should look here http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard_Tweaks scroll down to this "ANY FOLDER RING TONES"
You will need a Registry Editor like Total Commander 2 or PHM Regedit
Hope this helps
Javahater,
Have been trying above solution for about an hour, seems that this solution doesn't work under WM5, or at least it doesn't make any difference if you change the folder or not (it only points to windows not windows\rings)
Will have to keep looking.
Mikebj said:
Javahater and Ezzkht,
Maybe you should look here http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard_Tweaks scroll down to this "ANY FOLDER RING TONES"
You will need a Registry Editor like Total Commander 2 or PHM Regedit
Hope this helps
Click to expand...
Click to collapse
Thanks a lot Mikebj, it worked like a charm & without soft reset
I just copied all my favourite ring tones to the Storage ROM & it works 100%
Thank youuuuuuuu 8)
Mikebj said:
Javahater,
Have been trying above solution for about an hour, seems that this solution doesn't work under WM5, or at least it doesn't make any difference if you change the folder or not (it only points to windows not windows\rings)
Will have to keep looking.
Click to expand...
Click to collapse
AGREED !! I've got WM2003SE tried the steps mentioned http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard_Tweaks no use.......it still picks up the default folder from \windows\rings, where as I am pointing it towards \Storage Card\Sound\ not working
ok just double checked.....in sounds and notifications options it goes to \windows\rings folder.....but I have o2 plus installed as well...and in o2 plus sounds and notifications options it points me to \Storage Card\Sound any ideas ?
Ezzkht,
Happy t worked for you, can't say the same for me.
Well it is getting more and more weird, when I look in my registry it only points to \windows\ not even \windows\rings\, despite this it still manages to pick up ringtones/sounds in the rings directory, and all sound files placed in the root of the SD Card(go figure).
I'm out of ideas right now, but am still looking for a solution and will be back if I find one.
I just used Resco Explorer with the registry editor add-in.
It worked with me without a soft-reset!
What device do you have, Mike?
Maybe some nice sounds
Hello everyone!
It's a little bit off topic, a little bit not
My advice: SD card is not really a good place for sounds, at least in my case. Why? Sometimes it happened that when I got a phone call, instead of my nice ringtone I've heard the standard one. I think it has sth to do with powering up SD card while changing from standby mode. It's just my impression.
Secondly: I'm looking for some nice SMS ringtones, not the funky ones... I'm getting a lot of messages and it's really boring if you hear "Heeeeellooooo! Your message is coooooomingggg!" every now and then. I will appreciate if you could share your ringtone with me
TroLoo
Hi guys! I have recently bought a Qtek S200 device. When i wanna register on Qtek website for updates and etc. it says ur IMEI is wrong! I noticed that the code I get from mobile has an extra "00" in the end while the one printed on the box is a normal IMEI. does anybody have a clue?!
And i also wanted to know how can i personalize my SMS Alert tone?
tnx!
Q2) Settings -> Personal -> Sounds and Notifications -> Notifications -> Select text messaging in drop down list and change tune.
U see ... I wanna use my own tones. But i don't know where to copy them in order to appear in sound and notifications.
nobody to help?
you have to put the file in mydevice/windows folder in WAV format. and in notification apear the tone
Newbie
Hi Guys,
I'm new at this. I bought a QTEK S200 and as far as i read this foruns is the same as HTC Prophet.
Basically my problem is that i've got a 4GB SDHC but when i go to the storage she doesn't detect it. Is there any capacity limitation?
The reader is working because when is on stand-by and i put the SD it turns on the light, i think this means she's detecting something.
Thanks in advance for any info about it.
As far as i know the Prophet doesn't have the drivers for a SDHC. Only a regular SD card will work.
hi guys!
is there no way to use a .mp3 or .mid file as SMS notification? [i mean anything except .wav]
Some roms do, some dont. Youll have to look into it. Its not too difficult to convert an mp3 to wav though.
Windows - http://www.dirfile.com/wav_to_mp3_encoder.htm
Mac - use Toast or VLC player
cymru thanks man! I have another dumb question to ask!
It's that I've already unistalled a game but it is still in my Programs list. How can I remove it?! It bothers me so much!!!
nobody?!!!!
u go to windows folder, then start_menu folder, then programs (i guess) or games folder and there u delete the link.
wow i am so proud of myslef.... i answered someone elses question
u r amazing gdevil thanks! I searched all registry last night but i couldn't find anything!