I'm looking to get my LCD replaced (as it has a crack in it) and the screen cord fixed/adjusted which keeps making my screen go white and no image show on screen.
Is there anyone here that can do it for me in QLD or Australia and can I get a quote please.
white screen? contact me to show u how i solved my white screen
to solve your white screen, as i solved it in a very popular and easy way.
please contact me on my e-mail: [email protected]
or by sms +9613872442
but it worked 100%
N.B. it's not a proffesional way.
Related
Hi any one havnig any idea how to solve the white screen issue with my mobile,,,some time its is givng display and most of the time it becomes white blank screen ..still the touch screen workg.. sonno whats the issue...plz help if you know the solution
Mate, I'm gonna jump in here before you get BADLY flamed... This issue has been talked about to death. DO A SEARCH.....
Screen went white & buttons didn't work.. took to get phone fixed... and...now buttons work but the screen has a weird yellow tint
what is the problem, and how to fix
bump. anyone?
Can you say a bit more about it. How strong is this yellow tint. Can you upload a picture.
It's difficult to know if this is caused by a new screen that has a faint yellow tinge or whether it's a definite fault.
Mike
My phone started getting the white screen issue, the buttons stopped working.
When I'd turn the display on, it would be all white, id have to press it a few times then it would be ok, the buttons seized to function.
I took it to get fixed, the buttons now fully work, but the screen has a weird yellow tint all over. It didn't have it before. I was mad at the repair shop, the guy told me that its the LCD screen connector cable or whatever... but I don't believe him, as he doesn't seem to know wtf he is saying..
please help
Mine started doing this recently. Screen fades to white and nothing works but I can still hear if I'm on the phone. For me, turning it off and back on resolves the issue (I can see the display again). I suppose some aren't so lucky..
More than likely the LCD connector cable has a problem. Why he didn't fix it, I have no idea. If you feel up to taking it apart, you may be able to push the connector in further, OR you could buy a new screen. Then again...
Hi there
I have rebuilt many hermes with the same problems. I researched the issues on here and elsewhere - Its nearly always related to the entire Dpad/cable/connections . I have repaired nearly all of these quite simply by dismantling them and adjusting/cleaning and reassembling them - things move and get out of contact etc and this is what happens with these - get a torx driver and have a go - after a few tries you will usually solve the problem
Happy to assist anybody who would like a hand
Kind regards
John
i got my HD2 from service and the screen got replaced, now it's a very tiny and almost unnoticeable black dot in the top center, and when i press it i can see some pressure on the screen at the same spot. is there any possibility that there would be a wier or something behind the screen?
And do anyone know of a way to take out the screen and how i could check it out myself?
My advice would be to send it back to whoever replaced the screen and let them see to it..
It sounds like a dead / stuck pixel so they might not do anything about it as they are often a manufacturing defect - some companies allow upto a certain amount of them before replacing the screen.
Also there's not going to be a Wier behind the screen!
Is there any solution for white screen in HTC magician, I am facing this problem since last 10 months, have not found any solutions and not using the device any more. I had upgrade with cotulla's ROM. I see only lines with complete white screen.
Thanx
can you give a screenshot.may be you'll need to replace the screen
No Display
I don't see any display so cannot send screenshots
-
well i had same problem, white screen suddenly appear, prone is responding (i can call and receive calls) but the screen remains white until reboot/restart
well i solved it by replacing lcd connector. maybe your connector is not damaged, maybe its dusty or wet or something... you may consider opening and cleaning Magician from inside and see what happens
you have a two guides on how to dismantle magician hire in the wiki
My screen has a red dot and blue dot when screen is black/grey。
Can anyone have a idea whthout get a new one.
I am so sorry I don't know how to post a image here...
I got one dot near the top. The seller refused to exchange me a new one because they told that the screen must have at least 3 dots to be able to exchange. It's only clearly visible on some dark color like the dark green of the setting title bar. Currently I get used to it. You should ask the seller for warranty because this is manufacture problem and cannot be fixed yourself. Good luck buddy.
I got the same problem. This is usually caused by pressure damage. I got this by falling on top of my moto x while it was in my front pocket. It is a common problem with this device. Unless you are able to replace the screen yourself, you will need to contact the seller or motorola.