Database Users

ActiveSync 4.1 with Win2K

Hi
I have a KJam and I am trying to sync it at work. I downloaded AS 4.1 on my Win2K pc but it keeps giving me the Retrieving Settings message for ever. I dont think there is firewall on the pc and I need some help to get it running
Thanks a lot

any help guys, still have the problem

XP Needed
i think you have to use microsoft windows xp to sync your wizard.

So no luck with Win2K, I thought that people can do it with Win2000 and aslo from Microsoft Site AS seems to be working on 2000
Thats really bad

Me too
I also have this problem with one Wizard - my wife also has a Wizard, exactly the same which has no problem syncing to the same PC. I get the same message you get " retrieving settings" which hangs for ever until I disconnect. I'm on W2k.
Did you find and answer? It's obviously not a W2k issue if one Wizard can sync.

No I cant still sync with WIN2K, someone suggested that you do hard reset and it should work. I tried on mine and still didnt work

A random guess- applied SP4? Also which firmware version you are using?

Finally I have it working!
William - Yes, I'm on SP4
Akronica - I've finally managed to get both Wizards sync'ed. Here's what I had to do. Firstly, I'm using Sygate Personal Firewall, so I follwed the directions via the link here to set up the advanced rules. See http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x.htm This also might be useful to you for troubleshooting.
Then I added/altered 3 registry settings in my PPC (as also mentioned in the above link) using a freeware called "PHM Regedit". I downloaded the PHM Regedit from here:
http://www.pocketpcfreewares.com/en/index.php?soft=31
Just a note: I obviously couldn't use the ActiveSync installer to get this product installed, so I copied the entire directory over to my phone (via mini SD card) and then tried to launch each file. The first few didn't install successfully, but I finally did get one to install OK. The file that worked for me was "regedit_Mrln_ARM.CAB".
So, after all that I connected up and as soon as the cable was in, I soft reset the PPC. Sure enough, it made a new connection via the connection wizard and off it went.
Another note: I also turned off any passwords on the PPC, just in case. I'll do some more playing and see if this makes any difference.
Hope this helps!
Rob

William Yeung said:
A random guess- applied SP4? Also which firmware version you are using?
Click to expand...
Click to collapse
Interesting
On mine it connects (win2k SP4), but drops the connection about 60s into sync.
:wink:

I've now confirmed that the passwords had no impact.
I don't have any problems with it dropping connection either.

Wow yeah, I've had absolutely no problems synching with my win2k sp4. hm.

For anyone having problems with activesync - my solution...

Okay - I was having no end of problems connecting to Activesync and syncing to Exchange (local desktop would work ok), sometimes activesync on the desktop pc would stay at 'connecting' other times it would try to connect, but fail with error code 80072efd or 0x85002003. I also kept getting the error message on the PDA - unable to connect with your network settings (or something like it...).
After a couple of days trying to get it working (and occasionally succeeding after hard resets etc) I started investigating...
So, I checked a few things... Activesync 4.X uses a Remote-NDIS host on the PDA to make an IP based lan-type connection to your pc. Check your settings in
Settings > Connections > Network Cards > Network Adapters
for the 'Remote-NDIS Host'.
Mine had been set on 'Use Specific IP Address'. Change this to 'Use Server-Assigned IP Address'
Now check that it says ' My network card connects to' and that work is selected.
Now check Settings > Connections > Network Cards > Connections'
and check that the proxy server states - This network connects to the Internet' and that there is no proxy server specified.
I don't know if this will sort any issues out for anyone else - but it worked a treat with mine, so having spend days trying to get it working I thought I would share my horribly annonying experiences!!!
Hope it helps,
Liamo

on secoind thoughts - this has caused me more problems... grr I hate activesync - ignore my babbeling....
If I sort it properly I will post again..
i'm off to eat some apple-humble pie.
liamo
:-(

Okay,
so I uninstalled version 4.1 of activestink and installed the latest version 4.2. I created the pairing and hey presto - it's synching again.
Yup - it's great fun.
ohh, I also hard-reset in between 'cause I was annoyed!!!
;-)
liam

this worked for me.
i too faced the 'spinning wheel' problem with active sync.
i figured out that it was the configuration of the desktop or laptop and not the wizard as such.
1. after connecting the USB, i cud see messages like RNDIS device ready and all.
2. after this click on the lan icon in the taskbar of desktop. it displays all the lan connections. select the one that is for windows based mobile device.
3. in the properties for this lan connection, in general tab, check the box for Internet protocol.
4. In the advanced tab, click on settings for windows firewall.
5. check if activesync is added to the exceptions list. if not, check the box for activesync. click ok.
this should solve the problem. i sometimes have to do each time i connect thru usb.
hope this works.

hey guy i also had the same problem and although the first post was somewhat helpful, i still had to take an extra step in order for activesync to connect properly.
1. after changing to " Use Server-Assigned IP Address" in the connections tab i then had to:
2.go to the "usb to pc" interface and uncheck "enable advanced network funciotnality"
thanks for this post - i couldnt get my activesync to woork for the past 5 days

Activestink 4.2 won't even start on my computer :lol:
I don't really need it anyway :roll:

Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???

moedinha said:
Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???
Click to expand...
Click to collapse
You should make the activesync on the phone a serial connection instead of a ndis connection, this cab helped me:

great man! i tried everything and this really works. thanks a lot

mrjay said:
great man! i tried everything and this really works. thanks a lot
Click to expand...
Click to collapse
You're welcome
It was driving me crazy the first day I had my wizard.
you can also use a registery hack:
use your favourite regeditor;
change
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“RNDIS“
into:
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“Serial_Class“
Erase:
HKCU\Comm\RasBook\’USB\“Entry“
do a Soft-Reset.
check after the reset if a:
HKCU\Comm\RasBook\’USB\“Entry“ key has been made for serial communication otherwise it won't work.

the-equinoxe said:
moedinha said:
Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???
Click to expand...
Click to collapse
You should make the activesync on the phone a serial connection instead of a ndis connection, this cab helped me:
Click to expand...
Click to collapse
How can I run this cab if I can't use Activesync? (My PPC (MDA Pro) is in a vanilla state)

in my case was easier because i was able to copy on the ppc but i couldn't copy from it. trry to load it somewhere where you can take it from with your phone.

I've tried d/ling it from here but It doesn't save as a cab file.

Slave1 said:
the-equinoxe said:
moedinha said:
Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???
Click to expand...
Click to collapse
You should make the activesync on the phone a serial connection instead of a ndis connection, this cab helped me:
Click to expand...
Click to collapse
How can I run this cab if I can't use Activesync? (My PPC (MDA Pro) is in a vanilla state)
Click to expand...
Click to collapse
This is the trick I found out:
Connect your phone, wait till activesync starts.
Run taskmanager on your pc and kill:
WCESMgr.exe and wcescomm.exe
Go to your explorer (again PC) and doubleclick:
C:\Program Files\Microsoft ActiveSync\wcescomm.exe
Activesync will run now without errors (but doesn't sync!).
click on explore, copy the cab to the phone.
Disconnect the usb-cable, start the cab on the phone.
Reboot the pc, reconnect the usb-cable and activesync will sync again

the-equinoxe said:
mrjay said:
great man! i tried everything and this really works. thanks a lot
Click to expand...
Click to collapse
You're welcome
It was driving me crazy the first day I had my wizard.
you can also use a registery hack:
use your favourite regeditor;
change
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“RNDIS“
into:
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“Serial_Class“
Erase:
HKCU\Comm\RasBook\’USB\“Entry“
do a Soft-Reset.
check after the reset if a:
HKCU\Comm\RasBook\’USB\“Entry“ key has been made for serial communication otherwise it won't work.
Click to expand...
Click to collapse
I've make the registry changes but after soft resetting, no HKCU\Comm\RasBook\’USB\“Entry“ key has been created. Can you please post the contents of that reg key so I can put in manually otherwise is there something else I need to do to get the key created?

I have also had a similar problem with my computer and my Qtek 9100 not "finding each other" properly for a sync over USB ince the day I bought it over a year ago. Haven't been too bothered with it, as I've synced via BT instead (which works perfectly).
Still, technology that doensn't work properly seriously anoys me. Having tried all other available and suggested solutions I stumbled across the-equinoxe's recepie of reg-changes. After following the instructions I also ended upp with no HKCU\Comm\RasBook\’USB\“Entry“ for serial communication.
Therefore, I would like to repeat sunseakers call for help... Could anyone tell me what the contents of that entry is supposed to be?
Thanks for any help!

...i don't know if this will work for you, but i attached mine usbreg...

Thanks Krinkie.

ActiveSync must be one of the most frustrating applications out there. I have tried all recommended fixes and still cannot get ActiveSync to recognize my MDA. The last time I did a sync was 9/06. Too much BS using this application. I have searched all over the web and cannot find any application that will allow me to update my PIM file without ActiveSync. So, I guess I will finally give up on this. Thanks to all of you who have tried to help me. Thank You!!

I've been trying for days to connect to my laptop and the file above 'rndis to serial' finally did the trick... I'd read elsewhere about turning off your firewall etc, in the end I'd uninstalled all my firewall, anti spyware and antivirus programs...
Thank god for everyone here at XDA-developers... there wasn't anything useful on the Microsoft site.

Browsing device without activsync?

Is it possible to browse the device through USB without installing activsync?

You can download a small program called wm5torage. This enables you to connect your laptop to a pc as if it were a mass storage device. You can only browse whats on the memory card though, not system files.
If you want to browse through system files then Activesync is the only way i know of doing this. There may be a third party app somewhere, but you'd still have to install it so there's probably not much point..

I tried wm5torage some time ago (v1.6) and didn't work with my TyTN... it worked with my friend's wizard. Don't know if there's any newer version which works.... did you get it working on the Hermes?

Dont take time to try wm5torage on Hermes. I asked Seems there is no way to get it work.
http://www.modaco.com/index.php?showtopic=238545&st=400

ver 1.71 has been posted in this thread http://www.modaco.com/index.php?showtopic=238545&hl=wmstorage but the download page says the file is broken.

I run an FTP server on my TyTN. That way you can access and manage all files on your device via Activesync or a Wireless connection.
This one is basic, but free and does the job well:
http://www.freefloat.com/index.php?...=http://www.freefloat.com/p9614/p9614_swe.php
Make the FTP server point at the root of your device for full access to all files and folders.

i tried the ftp server, but it seems to be super slow to transfer files. I think it's faster using active sync to browse.

See here.
http://forum.xda-developers.com/viewtopic.php?t=62411
WM5storage doesn't work for me.

it should work when you disable advanced network functionality in: connections - USB to PC...
but when I disable that I get an error:
failed to disable RNDIS to use serial
even when I disable active sync to use USB when cradled.
any ideas?

new actie sync
My active sync does not sync my contacts. I have been told to download a new active sync. Does anyone know where I can get this from?
thanks
Scot

scotdevlin said:
My active sync does not sync my contacts. I have been told to download a new active sync. Does anyone know where I can get this from?
thanks
Scot
Click to expand...
Click to collapse
http://www.microsoft.com/windowsmobile/activesync/default.mspx
Mike

scotdevlin said:
My active sync does not sync my contacts. I have been told to download a new active sync. Does anyone know where I can get this from?
thanks
Scot
Click to expand...
Click to collapse
You may try the developers website...let's see...what were they called again. Oh yeah, Microsoft.

thanks! realise its a dumb q

nvm, half asleep

Anyone have any ideas if any PC i hook my phone up to says "USB Device Not Recognized." I've tried 3 PCs (work, home and laptop). None of which work. Any ideas?

try this!!!!!!!!
Chris The Ninja Pirate said:
See here.
http://forum.xda-developers.com/viewtopic.php?t=62411
WM5storage doesn't work for me.
Click to expand...
Click to collapse
Ah, but have you tried this?​
Goto: Start Menu > settings > Connections > USB to PC
Now, untick the box that says: "Enable advanced network functionality"
Now try reconnecting your Hermes! ​

Tried this, found it to be the best:
http://www.softick.com/pocket-pc/cardexport2/
Works on wm5 haven't tried it on wm6 yet (will install it soon) it's not free but it's worth it to try out the demo and see for yourself.

What is needed to be able to sync?

Hi all, i hope this is the right forum.
I have problems with ActiveSync... i dont get it, i have a HTC Touch Cruise with Windows Mobile 6, ActiveSync 4.5, Outlook 2007. Windows XP Pro (SP2) and the HTC connect, but the only thing I'm able to do is to browse the file system on the HTC, i cannot sync. The sync-action in the menus are disabled and cannot even be selected/pressed on either of the machine. Still they are connected, and i can, as i said, browse the HTC:s file system without any problems.
I have read something about "partnership" between Windows and the telephone on several forums on internet, but i have never been given the opportunity to set anything like "partnership", and following the guides to do so does not work. Also, ActiveSync says i'm connected as "Guest".
I have performed uninstall of ActiveSync and cold start on the computer along with reset of the HTC several times. I have also tried to perform the above procedure with the Anti-virus/Firewall software (F-Secure) deactivated all network traffic allowed. Still no luck.
What have i missed to be able to sync?
Regards
Margot

I gave up, installed Funambol instead, it's benefits over ActiveSync is that it actually works.

i posted a comment to this last night, but for some reason,it hasn't shown up!
basically if you right click on the active sync icon ,you can create a partnership.
But what i would do is unnstall active sync then restart the pc , then reinstall it from the download link i have provided at the bottom of this text.
Make sure also that you disconnect your phone from the pc and click start > programs > active sync
then click menu > options. If you have no partnerships in the phone then you need to do nothing. If you have partnerships then that is probably why you cannot create a new one as you can only have two partnerships on the phone.
before deleteing the partnerships ensure that you have backed up all your contacts etc in your phone as deleting any partnerships will also delete the info it is syncing to the pc i.e. contacts,appointments,tasks etc.
I would also click menu > connections and make sure that syncronise all pc's using this connection is ticked and that 'USB is displayed in the box underneath, then when that is done ,click ok.
use ppcpimbackup on your phone(not the pc) to back up all the important info so that you can restore it if anything goes wrong. Just unzip the following file then copy it to your storage card and use file explorer to open it.
http://rapidshare.com/files/85563377/ppcpimbackup_v2.8.rar
download the latest version of active sync here
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx

delete this post

scousemartin said:
basically if you right click on the active sync icon ,you can create a partnership.
Click to expand...
Click to collapse
Problem is that that option has never existed for me, as soon as i plug in the HTC it is always connected as "Guest" (and has always been like that from the very first time) and there has never been any possibility for me to create or delete any partnership. When i right click on the ActiveSync icon only three (3) options are available, these are "Open Microsoft ActiveSync", "Connection Settings..." and "Explore", all other options are greyed out. And option to create partnership does not exist at all, neither selectable or greyed out.
Also, i do have the correct version (4.5) of ActiveSync, i did even try the English version instead of the Swedish to rule out any impossible "possibilities" for the reason of my problems with ActiveSync.
I have written further on the subject (what procedures i have gone through in my desperate quest to get a partnership between my PC and the HTC) on this link.
scousemartin said:
if you are using Funambol ,does that mean you are using a mac?
Click to expand...
Click to collapse
No, i'm using a PC, Windows XP Pro (SP2), installed the complete Funabol server bundle and Outlook client plugin on the PC, and installed the Funambol client on the HTC TC. Set up the Server to my needs and everything that did not work with ActiveSync, now works with Funambol -- and all my base are now belong to me.

did you try the settings on the phone to see if you have the sync partnerships setup already? also did you check the sync connections were set to allow all pc connections to usb? I know you have it sorted out now , but just curious with what the problem is, especially as you can connect as a guest. Is there any other software on the phone that is stopping the active sync connection. Or is the firewall on the pc blocking it?
I have just read the forum link you posted.
The reason most of the options are faded out when you try to select them on the pc and ppc is that you have the device connected when you try you need to unplug the device and then the partnership options will be enabled.
P.S. I love sweden, i worked over there for 8 months and Norway. Mainly in the north of sweden. Your beer is too expensive though

scousemartin said:
did you try the settings on the phone to see if you have the sync partnerships setup already?
Click to expand...
Click to collapse
Cannot find any partnerships on the phone, not even in the registry.
scousemartin said:
also did you check the sync connections were set to allow all pc connections to usb?
Click to expand...
Click to collapse
This i have done. I can only do it when i'm disconnected, but i'm guessing that is normal.
scousemartin said:
I know you have it sorted out now , but just curious with what the problem is, especially as you can connect as a guest. Is there any other software on the phone that is stopping the active sync connection. Or is the firewall on the pc blocking it?
Click to expand...
Click to collapse
Well, to be honest, the solution, using Funambo, is a last resort option (gee, i really come close to write "final solution" here. ), and i would still prefer to get it to work with ActiveSync. With Funambo, since i want to have full control over where the information goes, i have to run a pretty heavy server on my computer, and it does feels a bit overkill for just syncing Outlook with a PDA.
Anyway, i have tried to disable the firewall and Anti Virus software (F-Secure bundle) and allow all traffic, uninstalled AS, removed the AS aplication drawer, reboot, installed AS, soft reset my HTC, and connect it. It feels like i have tried everything. I even tried to do the complete reinstall process with my network cable to the FiberLAN disconnected to exclude the possibility of failure because of some security restriction reasons in AS, since i have WAN (internet) straight into my computer without a modem, switch, router or anything else in between (part from 127.0.0.1 i do not even have a local IP address, only a public WAN IP).
scousemartin said:
I have just read the forum link you posted.
The reason most of the options are faded out when you try to select them on the pc and ppc is that you have the device connected when you try you need to unplug the device and then the partnership options will be enabled.
Click to expand...
Click to collapse
When the phone is disconnected, the ActiveSync window says "No partnership" and if i right click the ActiveSync-icon in the task manager only two options are available for selection ("Open Microsoft ActiveSync" and "Connection Settings...").
So, neither the PC or the phone has any partnership, still, when i connect them it immediately connects as guest and leave me no option to set up any partnership (neither disconnected or connected). Something is fishy.
scousemartin said:
P.S. I love sweden, i worked over there for 8 months and Norway. Mainly in the north of sweden. Your beer is too expensive though
Click to expand...
Click to collapse
*lol* Thanks! I'm no patriot or nationalist so i cannot take pride in being swedish, but i do appreciate our nature and so on... Indeed beer is expensive here, very expensive... But prize must also be put in perspective as it's a part of our still pretty successful national alcohol and drugs policy. It's a small price to pay for the sake of decent public health, and even with our high alcohol and tobacco taxes, the tax incomes from these products does not even close to cover the costs for the damage they indirectly cause.
Also, as i'm a "far left extremist", high taxes is a kind of a turn-on for me.

Please help - My Mobiler and Wm5totage

Hi,
I am trying to stop using Active Sync, it seems to slow everything down tremendosly. I use My Mobiler connection via IP to run PIM on my desktop. I was looking for a way to sync files and seems wm5torage is the only application that would do it w/o AS present.
However, the moment I activate wm5torage My Mobiler loses connection. It seems wm5torage re-sets device's IP address to 0.0.0 "dummy" address. I was trying to set it back to no avail. If I de-activate wm5torage I can connect again.
So,
1) is there a way to have both programs running simultaneously ?
2) if not is there a file syncing application that doesn't need AS ?
Thanks !

I use TotalCommander and if memory serves me I have added a plugin which let the PPC show up in the network page of TC. Maybe you can also use TC on the PPC and make a wireless network connection.

i ever used wm5torage but it also didnt work, softick card export is better
try

You cant use booth programs at the same time.
Cause WM5Storage activates PDA in USB mode and simulates pendrive storage.
It disabling the connection with activesync and other programs to sync/connecting with PC.
Cheers,
Chris

Thanks all who replied.
I ended up figuring out how to connect SOTI Pocket Controller, which I also own, in TCP/IP mode - something I wasn't able to do before. So I am using its sync manager to sync files, for now (although I don't like it nearly as much as MobSync so I may end up re-enabling AS just for that).

I am using the my mobiler apps to control the phone via computer..however The gprs connection will be disconnected everytime i plug the cable data...
can anyone provide me with some help pls?