Related
Dear All,
I've been searching to find a solution to this for 2 weeks now, there are some posts i have read whole forum almost, nothing seems to work.
I think it has nothing to do with what kind of bluetooth headset you have, there should be a program which should transfer audio from sound card of the Mda to the integrated phone inside this device.
Could someone describe how can we achieve this? It is very convenient to listen to audiobooks (if you think why would someone need mono listening)
I'm also willing to pay for this help.
Greetings,
Devrim
( http://forum.xda-developers.com/viewtopic.php?t=14687 )
my config: MDA (Dutch) wMobileSE 2.06 4.21.1088 with Jabra BT250
i tried to install widcomm, but it doesn't work.
Unfortunately we were the recipients of a beautiful piece of hardware that was released with a "non standard" bluetooth implementation. I have read peoples claims that this is possible, but, I am yet to experience a working solution.
RE
Hi!
Widcomm does not support bluetooth headset at the moment although the headset can be paired with your PPC ie. no sound recieved from your headset.
One way out is to listen MP3 from your PC/laptop which is possible through your headset, however, you'll have to get thre right dongle.
As for listening MP3 from my O2 XDA II through my iPHONO bluetooth headphone I had Widcomm + the High Quality Audio Profile installed. The sound was crappy with occasional split second interruption to the sound playback.
So much so for the current bluetooth technology for listening to MP3 playback on my O2 XDA II
how did you install widcomm and deactivated ms stack?
plus, iphono thingie has no microphone, hence i'll have to have two bluetooth headsets... not convenient...
thanks,
RE
Well, if you make a search for Widcomm there're many threads on this subject.
Read all of them and you'll be able to find your answers
Even the new Broadcom stack Build 3500 for XDA IIs does not support the mp3 playback on BT headsets.
The unofficial upgrade which adds hi quality BT headset profile, I still doubt it can do it coz the Audio Gateway preference is not listed. Damn
Re: RE
FOSA said:
Hi!
Widcomm does not support bluetooth headset at the moment although the headset can be paired with your PPC ie. no sound recieved from your headset.
One way out is to listen MP3 from your PC/laptop which is possible through your headset, however, you'll have to get thre right dongle.
As for listening MP3 from my O2 XDA II through my iPHONO bluetooth headphone I had Widcomm + the High Quality Audio Profile installed. The sound was crappy with occasional split second interruption to the sound playback.
So much so for the current bluetooth technology for listening to MP3 playback on my O2 XDA II
Click to expand...
Click to collapse
I had install the Widcomm BT stack, it is not working. There was no sound in the bt earpiece (mine is HBH-65) although it was paired with xdaII. The worst is it mess up the function for normal phone talking. I can listern the voice from caller but they cannot listern to my voice during phone call.
the xdaII can't get back to normal until a hard reset. Would you please tell me how to get the earpiece work ?
Hi,
the unofficial upgrade is working, I just got a pair of HP headphones, it's awesome. Just be sure your headphones support A2DP, regular headsets won't do it.
Treo
Nice one Mp3's over blue tooth. Any chance of a simple walk through on how to do it and the files needed?
cheers
plus, iphono thingie has no microphone, hence i'll have to have two bluetooth headsets... not convenient...
Click to expand...
Click to collapse
http://www.ppcsg.com/forums/viewtop...t=iphono&sid=6d3d546329a09353b6817f1c28cdca86
this iphone have a mic
and support music using the dongle and phone using the normal headset profile which even ms bluetooth stack support
try search for this little software call BTAudio to turn on/off the audio from mp3 to your headset
Does anyone tried to connect the XDAII with the new HP BT stereo heaphones with XDAII?
I have this HP device but can not install it.
Bummer..
Widcomm BT Stack on XDAII...
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Interesting. Will check it out and reply.
This is my experience using a HP bluetooth stereo headphone bonded with an O2 xdaII. I use Wincom 1.5 Build 2000 from "dtktvu". So far the setup has worked very well. After having used the setup for three weeks, my impression is as follows:
1. Connection with headset is very stable
2. Stereo sound is clear, quality is quite superb really.
3. So far this setup works only for music, it does not work together with bluetooth headsets (if you happen to have one). This means that you can not use your headset at all while using the headphone.
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
5. You have to use Windows Media Player as the player for point 4 to happen. I am not sure how the setup will react to incoming calls with other players such as Winamp, GS Player etc..
6. Battery life is quite good. I get about 6-7 hours of playtime from the headphone.
Now, if only someone will update this Wincom Driver further so that it can work together with bluetooth headsets, then we will have the best of both worlds... Maybe donations from potential users to provide incentive to some expert out there.
Widcomm BT Stack - Get it here
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
You may need this key as well
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Transports\BuiltIn\3]
"driver"=""
Thank you to dtktvu
Widcom on XDA II without Windows Mobile SE?
I would also like to use the HP bluetooth headset. I have a XDA II (not IIs). Will the Widdcom stack install on this? I am currently not running Windows Mobile SE.
Many thanks.
keys
where do we copy and paste those keys? do you think this could work with the Magician?
khanh_xda said:
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
Click to expand...
Click to collapse
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.
[/quote]
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.[/quote]
Thanks for the pointer, didn't work though.
Would welcome any other ideas.
Will this work on XdA2JoJo.v3.2zS version that has broadcom 3900? I'm planning in getting one.
Need advise...
Thanks
HP BT stereo headphones with XDAIIi
Hi,
I've read the thread but cannot see any indication of someone using an XDA IIi and the HP BT stereo headphones. Anyone know anything about this particular combination? So far I know the software that comes with the HP BT stereo headphones will not install on the XDA. And without the BT high quality audio profile installed I cannot get past pairing the devices. Any ideas?
Thanks,
R
Re: HP BT stereo headphones with XDAIIi
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
someone tried hp bluetooth headset with wm5?
Re: Widcomm BT Stack on XDAII...
dtktvu said:
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Click to expand...
Click to collapse
Other than the hp headset, does it work on i-tech clip S or i-tech clip S35 bluetooth stereo headset as well.
Re: HP BT stereo headphones with XDAIIi
hahol said:
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
Click to expand...
Click to collapse
install where ? :?:
has anybody done it this way !
Bstard said:
someone tried hp bluetooth headset with wm5?
Click to expand...
Click to collapse
anyone an idea? i want a bt headset (hp) but not willing 2 go back 2 wm2003
headsets
I have three stereo bluetooth headsets here for testing purposes:
- Logitech Wireless Bluetooth MP3 Headphones for PC (aka Hewlett Packard FA303 or Toshiba PA1831)
- Motorola HT820
- iTech Blueband
I have tested them on my Qtek 9090 (BlueAngel) and they all worked fine. There is not much diffrence in audi quality, the diffrence is more in the comfort of wearing them. Most of my collegues liked the Motorola the most but I prefer the Logitech. The iTech feels a little bit cheap...
More experience and info about stereo bluetooth headset is posted on http://www.robertwebbe.nl/A2DP.html.
Has anyone connected headphones with XDAII? i can't at all( after installing broadcom 1.5 phone cannot call correctly, i can't hear anything(
I have a iMate PDA2k EVDO & iTech BlueBAND headpones. I was able to use use the BT headset to use the phone however as the Broadcom 3500 stack didn't come with a Audio profile I couldn't hear music (mp3s via WM10). I installed Broadcom 3900 stack - can now hear stereo music but the volume on the phone is so low I can bearly hear it. Otherwise my PDA is stock standard Windows 2003 WWE etc. Any suggests? As I am a new owner, I would appreciate the help. Cheers,
Hi
I have recently received a Blue Angel from our mobile provider and it comes with the Bradcom stack 1.0.0.3900.
Does it have A2DP integrated, or I need to install anything to make it compatible? I am interested on a Motorola HT820 headset and i want to make sure it will be compatible...
Broadcom Bluetooth stack for Benq P50
Hi,
Has anyone tried installing the Broadcom Bluetooth stack onto a Benq P50 Window2003 2nd edition? Thanks.
Cheers!
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
Hi ,
I know many guys are intesting use VC through bluetooth headset. I found that it can be done in HP6315. Original there is only hands-free/Headset profile for bluetoothn in 6315, the Widcomm BT version is 1.0.0build 3701, the all sounds is from phone to BT headset,the VC dial can be down through BT headset. But the MP3 quality is very poor.
I just upgrade the Widcomm driver to 1.6.0.700, there have another "High quality Audio"profile, so you can use stero BT headset to listen MP3. The quality is good. So if we use SE HBH-ds970 BT headst, we can listen good MP3 and also can dial the number through VC use HBH-ds970. It is very convenience to get both function. When you launch VC, the phone will connect BT handset, the sound is transfer to headset, you can say the number or others instruction by BT headset, when you finish it, the connection between 6315 and BT headset will automatic be active. It will not lost the battery of headset.
Here the question is I 'd like do it in 6515 since I need the mini keyboard and GPS function. 6515 already have "High quality Audio" and "Handsfree/Headset" profile, you can listen good quality music and also can call/answer the calling through BT headset. But it can not use VC, the VC sound is always from phone.
I check the Reg file of them, its are almost same. Unfortunately, I do not have knowledge of Reg file and widcomm stack, can some expert can help me on this?
Thanks in advance!
Regards,
lxy
Could someone share the latest BT drivers for 6515e?
Hi,
I wonder if I could find a good voice dialing software for my iPAQ. Could you please help?
Also, does anyone know the latest BT version post the 1.21 rom?
Thanks and kind regards,
Prankey
In wm5 my bluetooth headset was able to next,back,play,pause the songs and now with WM6 it does not work.
I checked at coreplayes forum and noone seems to even own a x7500.
Anyone using coreplayer with WM6, if yes is your BT headset able to do next,back,play,pause?
i se voice activation via ms command
I use CorePlayer. I don't have headphones but do have a Jawbone headset.
I use Coreplayer with a pair of Blueant Stero Headphones on WM6
No probs what so ever controlling playback or with the headsets other BT capabilities.
JasjarMan said:
In wm5 my bluetooth headset was able to next,back,play,pause the songs and now with WM6 it does not work.
I checked at coreplayes forum and noone seems to even own a x7500.
Anyone using coreplayer with WM6, if yes is your BT headset able to do next,back,play,pause?
Click to expand...
Click to collapse
Have you checked for manufacturers compatibility list of your BT headset with WM6?