Hi,
I used ASUS P525 with SE HBH DS-970 and installed JetWare for using caller id and contact name. I could install but could not use it due to the fact that "Your device do not support for this version"
How should I do? Any version could be installed?
Thank you very much.
No one help me ~~> <~~~
I still waiting for any advices.
Your device probably doesnt have a microsoft bluetooth stack installed.
Related
Hi all,
I have installed Widcomm Bluetooth 1.4.2.21 on my PC.
The problem I am facing is that Widcomm can not detect my Com1 Bluetooth Dongle.
Can anyone help me.
Thanks in advance for your help.
Best regards,
Saadi
Hi! Where can I find Widcomm 1.4.2.21 for downloading? Do you have a link?
I have an Acer bluetooth Dongle using an older version of Widcomm Stack (1.3) but its working fine, except networking with XDA2 because of stupid MS Stack, tried to install Widcomm Stack also on XDA2 (with file bluetoothgps.zip)but its not a real solution as the headset doesn't work nicely....and the two stacks interfere.. I you want I can perhaps upload it here, although its quite big (25MB).
Regards
Rainer
widcomm
Do you have an ftp server where I can uploaded for you.
I tried to uplod it here but I could not.
Bets regards,
Saadi
Do you have an ftp server where I can uploaded for you.
How big is it?
I would really appreciate if you can share it with me (others) as well.
My BT dongle came with older version and experiencing some problmes because of it...
Can't you attach it to your message? I've seen tons of people attaching ROMs that are 26mb
you can find it here http://www.filemirrors.com .
Best regards,
Saadi
Nice one! downloading right now :lol:
Great site filemirrors.com!
Thanks a lot, cheers!
Version 1.4.3.4
V1.4.3.4 is also on filemirrors for download.
I've pulled this down, but before I install it, any views as to XDA2 compatability and functionality compared to the built-in stack (ROM 1.6)
Thanks!
Have you tried this? http://home.comcast.net/~spam-target/activesyncz.html
It didn't work with my Orange Blue2 USB dongle.
hmmm strange... when I try to install the widcomm 1.4 versions the com port is always com 0 for the serial port service... I cannot change this or add a port or anything. Now I reinstalled Widcomm 1.3.5 (attached) and everything is fine and I can use serial port com 4 but in Widcomm 1.3.5 theres no Audio Profiles oder HID Profiles . ...but I need com 4 for ActiveSync....I have Acer Bluetooth Dongle..... Anybody has a Solution?
Cheers...
Hey,guys..try this tutorial,so you can install a widcomm 1.4.x.x to any of your Bt dongles without problems! :wink:
http://www.jonsguides.com/bt/en/driver.html
Regards
Very good guide! Will try it tonight, hope it will work...
Thanks for the link...
Hi !
You can download
Widcomm 1.4.2.10
here : http://www.bluwireless.com/products/bw001.html
I have many difficulties with activesync, network etc... /bundle...
I may have some questions soon
mmm...
It may be better not to download the above link... i think there is a license problem...
sorry
Hi,
Anyone knows which version of widcomm blutooth stack works on win2003se 2.2xx tanslated from chinees??? please somebody help me with this...
Thanks
there is a treed on this forum with a working widcomm driver, i personaly have the 2.20 SE ver of windows, and I have it on my hima, it is working perfectly.
my version is 1.5.0.0801, do a search on the forum. there is a guy that made a cab instalation file for it, all that you need is to download the cab and the registry files wavedev and 1[1].5.0801-Final.
read the tread for more info on it.
i really appreciate if you can email me or upload the files since i am totaly confused with this...
Thanks
I would be also very much appreiciated if somebody will be able to upload it here.
thank you
click
Search
type widcom 0801
choose "Search for all terms"
Enter
====> TADA =>>>>http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm+0801
M4io, Thanks but does it work on win2003se 2.2xx tanslated from chinees?
I don't know, i guess you just have to try.
If you do, please post your experience, so others can benefit
yeah sure, i have installed BlutootGPS and then WidcomPE and is working fine, just sometime says "bloototh could not be correctly initialized" but when it connects works fine.
I told you that the other .cab file is working fine on the 2.20 ver. I know for the message that you get, you need the non phone edition version, look at page 3 of the treed that m4io posted and look fot henrylim's post, there is a file attached called BT Widcomm.zip, download that and then download the other two files that i told you before (wavedev and 1[1].5.0801-Final), this two files are on page 1.
Thanks gotcha_mdaII,
i'll give it a try...
Hi,
I came across this seemingly wonderful BT stack replacement. It advertised to be A2DP, HID, LAP, OPP, PAN, SPP, SYNC, HS (headset) etc. Seems to have an excellent set of profiles!
Can someone try this on their device and tell me whether it works?
I'm looking for WM2003SE and WM2003 fellas (1.60, 1.72)..
http://www.bluesoleil.com/update/index.asp
Download Bluesoleil_CE_Eva_7.30.zip, version 1.4.9 (dated Nov 22, 2004).
It's a 60 days evaluation copy.
I will be the first to admit that it didn't install properly on my device, but then again, my device is now a mis-mash of configurations due to my various test on the registry.
Please check it out, and let us know. Perhaps this might be the solution to end all our problems.
And I hv extracted the HP phone registry - only the Widcomm BT related parts. Can't post the whole thing here, sorry.
Have fun to figure out if HP registry helps in enhancing our Widcomm stack....
Anyone has a XDA2s wavedev.dll?
About Bluesoleil tried it few weeks ago. Not working at least for my headset (Bluetrek G2).
Actually I guessed it's not working at all.
Thanks!
Hey Henry!!!,
Thank you very very very very!! much!!!
Now i have widcomm 1.5 and my bluetooth headset is working and im not get those annoying messages agian!!!!....I LOVE MY DEVICE..Thanks Again!!!
Mr 1 , could u listen to any mp3 by your bluetooth headset now?and how?
Please excuse the slightly naive post, but is there anyway that programs made solely for WM5 can be MADE to work on 2003/SE?
I ask this because Microsoft Voice Command 1.6 has been released but it's only for 5.0
I tried it on my 2i but just says something about keeping it hidden until a compatible device becomes available...
Thanks
nope, it's compiled for 2005 version
Eelco
can somebody tell me where i can download the Broadcom bluetooth stack 1.7.1 or an early version?
I found version 1.5 on the aximsite... can somebody using this BT stack give me a recommendation???
update:
I tried to install the 1.5 from the aximsite, but have way through it says, storage memory to low... but it's not true, i tried to installed it on my 4 gb storage card, and it sayst he same. have somebody tried this out? or anybody knows a BT stack for UNiversal??? because i want to explore my other phones through bluetooth...
anybody????
I "think" the Bluetooth stack for WM devices is incorporated into the ROM so can't be downloaded and installed seperately. Do correct me if I am wrong.
Richard Fantom said:
I "think" the Bluetooth stack for WM devices is incorporated into the ROM so can't be downloaded and installed seperately. Do correct me if I am wrong.
Click to expand...
Click to collapse
I don't think so, because.. Dell Axim phones can download it and install it on theire devices through the aximsite.
make a search in Development and Hacking
for widcomm or broadcom
you'll get some hits with some links
since your application is Universal-specific, also try the same search (Widcom or Broadcom) in the Universal forum. While you are looking, pay special attention to information from Menneisyys. He's about as up to date as anyone on BlueTooth issues.
Hope that helps!
I have been searching the fourms here and have not yet found a difinitive answer if there is a tweak that will allow you to get VC 1.6 to anounce Caller ID over bluetooth. My searches show that my version of WM5 is not new enough to support this feature. If anyone has discovered a method to get VC 1.6 to do this your help would be greatly appreciated.
Thanks,
David
The easiest thing you can do is install a cooked AKU 3 ROM or a WM6 ROM
Thanks,
I was hoping that there was a registry tweak that would do the trick.
I see that the ROM will no longer be available on this site. What are people doing to get these cooked ROMs?
Thanks
This is all you need.
http://forum.xda-developers.com/showthread.php?t=286497&page=3
Thanks, This program works great!!!