Database Users

OFF-TOPIC PS/2 to USB convertor?

Hi all,
Apologies if this is not allowed on this forum, I've had great help from you guys in the past and I thought here would perhaps be a good place to try for help now, even though it's not HTC related! If it's not allowed please close this thread and accept my apologies.
I have just been given a new work laptop and went to hook it up to my KVM at home when I discovered that it didn't have any PS/2 ports for keyboard or mouse (yes yes I know I'm not "up with the times" and using USB!) so I went out and bought from Maplin a PS/2 to USB convertor cable - you know the type, 2x PS/2 sockets to 1x USB plug. I hooked it all up and keyboard is working but mouse isn't!
I've played around and played around trying 3 or 4 different mice and can't get the mouse to work at the same time as the keyboard :-(
Has anyone got any experience of this and have any idea how to fix it? It's really annoying not being able to use a proper keyboard and mouse, especially when trying to play Total Annihilation.
Many thanks in advance
G

get your adaptor replaced

Connect Athena to external touch screen monitor, possibile?

Hi guys, i am currently trying to set up my Athena with my car, i wonder if it's possible to connect my Athena with a external touch screen monitor like this one: http://cgi.ebay.co.uk/8-INCH-TOUCH-...9QQihZ005QQcategoryZ32826QQrdZ1QQcmdZViewItem
throw the VGA cable.
I know it will display the screen throw VGA out, but I am not sure whether it will enable the touch screen function, any of you know this?
Thanks a lot
p.s. I will post some screen shot if I succeed in this project.

Is that a PS2 port?
Seems to me the key question is how would it get positioning info back to the ameo? That looks like a PS2 port on the non-vga cable. IF it was sending back mouse positioning info AND a simple ps2 to USB converter would work then I'd guess it MIGHT work with the mouse drivers i've seen discussed elsewhere. There is a fair few conditions to meet but mostly at a low level by the look of things. Not much info to go on and also it loks like they are using a pen of some kind there. That makes it less useful I think?

inframan said:
Seems to me the key question is how would it get positioning info back to the ameo? That looks like a PS2 port on the non-vga cable. IF it was sending back mouse positioning info AND a simple ps2 to USB converter would work then I'd guess it MIGHT work with the mouse drivers i've seen discussed elsewhere. There is a fair few conditions to meet but mostly at a low level by the look of things. Not much info to go on and also it loks like they are using a pen of some kind there. That makes it less useful I think?
Click to expand...
Click to collapse
I am sure you don't need a pen, there are lots of touch screen out there, for example this one: http://cgi.ebay.co.uk/ws/eBayISAPI....tToStoreCat&refwidgettype=cross_promot_widget
I just don't know if we simply plug in the vga cable from our Athena to the touch screen, will that work?
Possibility not, I can kind of see a usb cable there, how about plug that in the usb host ? but then maybe we still need to install the driver.....
Basically, what I am trying to do here to use get a bigger screen to show for Athena in a car. So, I will then have much bigger TOMTOM, and also can watch movie or go on internet.
Any good suggestion guys? Thanks a lot for all your help.

I cant see any specks on that, but i did find another that said it was usb, if thats the case theres no reason why it shouldnt work.

johnwalk said:
I cant see any specks on that, but i did find another that said it was usb, if thats the case theres no reason why it shouldnt work.
Click to expand...
Click to collapse
it seems like they all need to install driver, do you think it will work without driver?

thats the only problem, does it need specialist drivers? I havnt been able to come up with an answer yet.
But i wont be buying one for the car, somone nicked me vario yesterday from the car so not even chancing the Ameo.
I was just going to buy a little 7" tv I bought this tiny Keyboard out of Maplin on offer. thought it would look sweet in the car. but this is giving me other ideas, anybody shed light!

They ALL need specialist drivers.
Touchscreen is absolute position, mouse is relative. You NEED the custom driver. It may be possible, but I dont know how.

1. I think on the Pic is a S-Video cable not PS2.
(The specs say nothing about PS2)
2. Till now i just saw Touchscreens with USB and like Profer said they all
need secial drivers.

Basmelek said:
1. I think on the Pic is a S-Video cable not PS2.
(The specs say nothing about PS2)
2. Till now i just saw Touchscreens with USB and like Profer said they all
need secial drivers.
Click to expand...
Click to collapse
Thanks for your answer, i just ask one of the seller there on ebay, and the answer I got is I will be able to plug the VGA cable in, that will enable the screen to display, but in order to get the touch screen working, I also need to plug in a USB, so now the question is whether the USB host will work on this....and of course the driver need to work too

The 4in1 cable should allow the USB to connect, but you would have to convince 3m or somebody (make most of the drivers) to write a PPC driver.
As almost ALL ppc's are touchscreen, they probably wouldnt bother for the 1 customer that wants it
If you know a coding guru who understands USB, then get them to do it for you. Either way, I doubt its gonna happen.

IT WORKS!
Hi, everybody.
Don't know how many of u are interested in this issue, but anyway:
1. just grab the generic touch screen driver for win ce 5.0 from the usual site.
2. Copy 'n paste the UsbTouch.dll file into windows root directory of the X7500.
3. Plug the video cable (the one with usb connector).
4. Plug the xenarc TS usb cable in the abovementioned cable.
5. Wait for the dialogue box asking for the driver to be used with the unknown device.
6. Write the name of the .dll file copied into the device.
7. Press ok.
et voilà, les jeux sont fait! It woks perfectly, without even the need for calibration.
This is (even if it lacks some of the fun of setting up a carputer from scratch) the ultimate carputer, perfect integration among all application and real time (quite) OS.
Cheers.
Cyberlancer.

Pyrofer said:
The 4in1 cable should allow the USB to connect, but you would have to convince 3m or somebody (make most of the drivers) to write a PPC driver.
As almost ALL ppc's are touchscreen, they probably wouldnt bother for the 1 customer that wants it
If you know a coding guru who understands USB, then get them to do it for you. Either way, I doubt its gonna happen.
Click to expand...
Click to collapse
Your on the right track with this answer,
Look for a touch screen that has a protocol that is treated as a standard HID ( Human interface device ) Ie:mouse, keyboard etc.etc.
if you can find such a device then the built in drivers for plug and play HID's will work fine.
otherwise the rest are right

Did this really work??? What car? This would simply be quite fantabulous.
cyberlancer said:
Hi, everybody.
Don't know how many of u are interested in this issue, but anyway:
1. just grab the generic touch screen driver for win ce 5.0 from the usual site.
2. Copy 'n paste the UsbTouch.dll file into windows root directory of the X7500.
3. Plug the video cable (the one with usb connector).
4. Plug the xenarc TS usb cable in the abovementioned cable.
5. Wait for the dialogue box asking for the driver to be used with the unknown device.
6. Write the name of the .dll file copied into the device.
7. Press ok.
et voilà, les jeux sont fait! It woks perfectly, without even the need for calibration.
This is (even if it lacks some of the fun of setting up a carputer from scratch) the ultimate carputer, perfect integration among all application and real time (quite) OS.
Cheers.
Cyberlancer.
Click to expand...
Click to collapse

[Q] Mouse cursor for Vega

I've been using pauls usb host and I can connect a mouse but can't see any cursor. Is there any app or someting to show a cursor. Thanks

I get a cross hair mouse icon if I plug a mouse in. Are you sure the mouse is working properly?

Dont expect every mouse to work. I tried with several different ones, but only a few worked.. and then you have mice like apples mighty mouse, android doesnt have any idea how to work with those. If your mouse works properly you should see the icon as chrishudson said.

I know the mouse is working because it has a light which shines when I plug it in. It could just be that the mouse is not supported or something like that.

yioti said:
I know the mouse is working because it has a light which shines when I plug it in. It could just be that the mouse is not supported or something like that.
Click to expand...
Click to collapse
all that means is the mouse is taking "power" from the vega's usb doesn't mean the mouse is working and doesn't mean that its compatible with the vega.

I thought it would be that but thanks anyway

I think I saw someone on modaco say that they needed to have their mouse plugged into a USB adapter for it to work correctly .

I'm having the same issue, since the last update my usb mouse isnt working anymore. A few others have reported this over on modaco forums too. Hopefully there will be a fix soon

This appears to be due to the 1.08 and 1.09 based ROMs, 1.06.5 apparantly had an X cursor working... Is it something simple like the pointer image not being in the framework anymore? In 1.08 the mouse actually works, you can flick through homescreens/pull the notification bar down with it, you just can't see the pointer
Zeb

And what is the solution to this problem??? My mouse is registered and it is working, but no pointer appears.

Search the advent vega forum over at modaco someone has podted how to get mouse cursor back.
Hope this helps.

If you head over to vega - modaco - com. Search for "mouse cursor gone" and select the thread with that title there is post on it with a file that fixes this problem.

USB Mouse working on Advent Vega
I have an Advent Vega running Vegacomb and when I plug in a standard usb mouse it picks it up straight away and a cursor appears immediately. No problems whatsoever!

yioti said:
I know the mouse is working because it has a light which shines when I plug it in. It could just be that the mouse is not supported or something like that.
Click to expand...
Click to collapse
your a fool, if the light comes on that just means the mouse has power going to it. it may not indicate that its a functioning or supported mouse.
i have tried 3 different microsoft optical mice now, the small netbook one, the intellimouse and the larger version of it and they all work fine.

Why the insult.
How did you become a senior member? By leaving lots of insulting comments I assume.
I don't see the point of insulting members by calling them a fool just because they don't understand something.
By the way, it's you're not your.

USB Keyboard Support?

Picked up an A500 today after carefully reading through the documentation on Acer's support site as well as the user manual for mentions of USB keyboard support. It says implicitly that there IS support for USB keyboards (just not USB mice yet). However...I can't get a single USB keyboard to work (I've tried 3). Anyone tried this yet and gotten it working? I know the USB slot is working ok, because it reads a thumb drive just fine. Thanks!

meatlocker said:
Picked up an A500 today after carefully reading through the documentation on Acer's support site as well as the user manual for mentions of USB keyboard support. It says implicitly that there IS support for USB keyboards (just not USB mice yet). However...I can't get a single USB keyboard to work (I've tried 3). Anyone tried this yet and gotten it working? I know the USB slot is working ok, because it reads a thumb drive just fine. Thanks!
Click to expand...
Click to collapse
I have had no problem with the one USB keyboard I've tried. It's a generic Apple clone from Deal Extreme.
No luck with Bluetooth keyboards though.

i could not get it to work with wireless USB keyboards but it did work with a dell USB keyboard.

it works with a logitech wireless keyboard

(I just realized that this is in the Dev section - mods, please move if needed!)
I tried a Dell keyboard, and it worked. One of the things I really hoped was going to work was the GTab case/usb keyboard combo ...the A500 fits perfectly in this case, even more snuggly than the GTab. I can't understand why it doesn't work.

meatlocker said:
(I just realized that this is in the Dev section - mods, please move if needed!)
I tried a Dell keyboard, and it worked. One of the things I really hoped was going to work was the GTab case/usb keyboard combo ...the A500 fits perfectly in this case, even more snuggly than the GTab. I can't understand why it doesn't work.
Click to expand...
Click to collapse
I tried a cheap chinese case/usb keyboard combo and it worked but the a500 doesn't fit in...

USB keyboard
Got a case/stand for my vega for £20 of amazon which has a built in usb keyboard, tried it on the iconia works 100%
Actually I think having mouse support would be nicer, maybe in imminent 3.1 release.

KEyboard
I did not have a regular USB keyboard laying around so I tried a PS/2 using a PS/2 to USB adapter and worked perfect.

VitaZora said:
I have had no problem with the one USB keyboard I've tried. It's a generic Apple clone from Deal Extreme.
No luck with Bluetooth keyboards though.
Click to expand...
Click to collapse
Just posted in the "Iconia A500 Accessories" forum... I tested the Logitech Cordless MediaBoard Pro for PS3 (bluetooth keybd) and it worked !

Something people may need to note: When I plug a keyboard in while the screen is off, or is locked, it does not work. If I first login, THEN plug in the keyboard (Logitech multimedia USB keyboard) it works great.

i tried some cheap micro keyboard+trackpad combo (about as wide as the tablet in landscape) & had issues. Only time it worked was when I was in the URL bar of the browser, "physical keyboard" showed as an input type option. Anywhere else it just sat plugged in. I may steal my dad's Mac BT keyboard since he doesn't use it. Will clash horribly though

I've got it running on a BT Keyboard/mouse device Works great... I've had issues with the headphones plug not stopping my music... (listen to Hard Rock at work and everyone hears it =(oops).. pull headphones and plug them back in... lots of really little niggles that need to be worked out... hopefully acer will find them all with the update next month!!!

threedfreek said:
I've got it running on a BT Keyboard/mouse device Works great... I've had issues with the headphones plug not stopping my music... (listen to Hard Rock at work and everyone hears it =(oops).. pull headphones and plug them back in... lots of really little niggles that need to be worked out... hopefully acer will find them all with the update next month!!!
Click to expand...
Click to collapse
Ohhhh! I've always wondered about that keyboard! Does the trackpad work? How's typing with that keypad?

Touch pad works great for pc and playstation 3... etc... but for the acer it does nothing... Arrows work to get from item to item typing works great... I believe an update will/can allow mouse...
FYI... this device comes with it's own bt usb adapter that is really weak however, when connected to a bluetooth device has decent distance.

threedfreek said:
Touch pad works great for pc and playstation 3... etc... but for the acer it does nothing... Arrows work to get from item to item typing works great... I believe an update will/can allow mouse...
FYI... this device comes with it's own bt usb adapter that is really weak however, when connected to a bluetooth device has decent distance.
Click to expand...
Click to collapse
How's the hardware? Solid? Connectivity in and out? And how easy/difficult was it to pair? I've read that a lot of these no-name devices don't come with specific instructions on pairing.

rorytmeadows said:
How's the hardware? Solid? Connectivity in and out? And how easy/difficult was it to pair? I've read that a lot of these no-name devices don't come with specific instructions on pairing.
Click to expand...
Click to collapse
Pairing was as simple (on my samsung epic) as searching for devices.
1. push the bluetooth button till the light blinks
2. Search for devices
3. type in a passcode on phone/device
4. type that passcode on the keyboard
I think this is how it was done... worked really well first time to my epic... easily connected on my a500 too. I love the keyboad it works with my entertainment pc that has sagetv on it so controlling the 47" from the couch is awesome.
edit: Hardware is really solid and the bt usb device slides into the keyboard... really convenient

I managed to pair with my Apple wireless KB but no love for typing.

ramy717 said:
i could not get it to work with wireless USB keyboards but it did work with a dell USB keyboard.
Click to expand...
Click to collapse
ditto here.

peyotll said:
I tried a cheap chinese case/usb keyboard combo and it worked but the a500 doesn't fit in...
Click to expand...
Click to collapse
Which one?
EVO Mobile

My cherry keyboard doesn't seem to run. Sad
DMESG says the following:
<6>[ 660.363583] usb 1-1: new low speed USB device using tegra-ehci and address 6
<6>[ 660.410104] usb 1-1: New USB device found, idVendor=046a, idProduct=0023
<6>[ 660.410487] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>[ 688.559913] usb 1-1: USB disconnect, address 6

Keyboard

Hi,
I am happy with the Mojo, and are using it mostly for media.
To control, I am using a wireless keyboard with irda adapter connected to the usb v2 port.
Now want to use it for gaming at the same time off course.
The problem is when connecting the gamecontroller in usb v3 port.
Sometimes wifi stopped working, and the keyboard loses connection as well.
Have you tried keyboard (with mouse) and the gamecontroller at the same time?
What are your experience and what type of keyboard are you using?

andieha said:
Have you tried keyboard (with mouse) and the gamecontroller at the same time?
What are your experience and what type of keyboard are you using?
Click to expand...
Click to collapse
I use this BT2 keyboard/mouse combo
Works well, Just have to hit esc to get out of virtual keyboard.
Both paired and connected at the same time.
Both time out but come back on with no problems.

I usually have MOJO set up in a desktop setting with a wired keyboard/mouse connected to a USB hub, which in turn, is connected to the MOJO. Also played around with a few wireless keyboard/mice. No issues with having keyboard/mouse/etc connected at same time as the CTRLR's USB dongle. The only problem is getting used to the virtual keyboard disappearing if a keyboard is connected.
To note, I use one of our Mad Catz RAT's that has on-the-device DPI adjustment, letting me adjust pointer speed on the fly.

Performed a backup using Titanium and then connected the irda keyboarb in the usb 2.0 usb port.
Worked without any problems this time
Sent from my GT-P5113 using Tapatalk

andieha said:
Performed a backup using Titanium and then connected the irda keyboarb in the usb 2.0 usb port.
Worked without any problems this time
Sent from my GT-P5113 using Tapatalk
Click to expand...
Click to collapse
I keep a logitech wireless mouse handy. When I need it I just plug in the dongle to the 2.0 port on back. No issues using the mouse or CTRLR simultaneously.

I'm trying to figure out the best way to have the virtual keyboard hide while I use my bluetooth keyboard/mouse combo. I am using a logitech Mediaboard Pro which was built for the ps3. It doesn't connect with a dongle , it is true blutooth. I'm not sure if that makes any difference with how it effects hiding the virtual keyboard or not. I have been connecting to it with in the settings, blutooth menu. I have tried a couple of the Null keyboard apps in Google play with no luck. Anybody have any suggestions.

Can someone please recommend a decent bluetooth keyboard with touchpad. No usb dongle.
Thanks

The next firmware update should help with that issue - we're hoping to release it very, very soon.

mokdakid said:
Can someone please recommend a decent bluetooth keyboard with touchpad. No usb dongle.
Thanks
Click to expand...
Click to collapse
Bluetooth combo keyboards/mouse generally don't come with USB adaptors.
So, I think any BT2 (classic) keyboard will work, mine works fine (a bit too small) but as Nate says have to escape out of the virtual keyboard.
USB keyboard doesn't do this.
Mad Catz Rich said:
The next firmware update should help with that issue - we're hoping to release it very, very soon.
Click to expand...
Click to collapse
:fingers-crossed:
Looking forward to it

gwaldo said:
Bluetooth combo keyboards/mouse generally don't come with USB adaptors.
So, I think any BT2 (classic) keyboard will work, mine works fine (a bit too small) but as Nate says have to escape out of the virtual keyboard.
USB keyboard doesn't do this.
thanks
Click to expand...
Click to collapse

I've posted the link to the latest firmware update here:
http://forum.xda-developers.com/showthread.php?t=2647180
Install that and it should sort the onscreen keyboard issue as Bluetooth keyboards will now correctly detect as physical keyboards.

Mad Catz Rich said:
I've posted the link to the latest firmware update here:
http://forum.xda-developers.com/showthread.php?t=2647180
Install that and it should sort the onscreen keyboard issue as Bluetooth keyboards will now correctly detect as physical keyboards.
Click to expand...
Click to collapse
Thanks, did the update and I'm really glad by the better support to blutooth keyboard. Now the mojo will remember my blutooth after rebooting. Also I noticed the word suggestion at the bottom of the screen. Is there a quick method of inserting the suggested word other than using the mouse to pick it. Thanks