Anybody have the mini USB pin configuration for the headset that come with the phone.thanks
Related
Hello,
I have Mini and Destinator 3 and BT GPS, I want to purchase a handsfree speaker in the car.
1. Is it possible to use a bluetooth speaker in the car and use the same speaker for the voice command directions from Destinator via bluetooth to the same bluetooth speaker ?
or is it possible to:
2. To have a 12v cigarette plug in speaker including Microphone that has a 2.5mm or 3.5 mm connector so that any audio coming from the 02 mini either a call or destinator voice command comes through the speaker.
Can anyone help ?
Thanks
P;-)
Hi voicedialin,
The first case won't work, because there is (by now) no bluetooth profile available for the magician, which would allow that (BT Audio). Could be done by changing/hacking the bluetooth stack.
The second case will work, as the magician will direct both the Destinators wav output as well as the callers voice whilest a telefone call to the output connector. The only thing, which might be a problem ist the audio connector of the magician, which is a 4 pin 2,5mm connector which is normally used for stereo audio out, mic in and signaling functions (pic up call/end call). Usually such connectors aren't sold seperatly.
Greetings,
bgk
Does anyone have the pinout for the headset jack on the Wizzard (K-JAM)?
I've found this pic for the JAM, but I don't know if it is the same pinout for the K-JAM ...
So (Left, Right, Mic, Ground):
1)
2)
3)
4)
Thanks ,
Kelu
Hi,
i use a adapter to us my trion over the aux on my car radio.
The Question:
Is it possibly over a registry tweak to use
Headset Output (Aux - car speaker)
and
normal handsfree option for the phone aktion?
thanks
I own a JasJam I-mate and have a consistent problem with the Bluetooth communication with my car speaker Parrot ck3300 and parrot 3400 ls-gps and my Bluetooth Motorola earphone hs820 .The problem is that when I switch the car on the Bluetooth communication is working OK the first time. Once the car switch it off and start again the I-mate is not being paired although it show that the Bluetooth is activated ( flashing purple light) but no pairing occurs. When I check the I-mate in the Bluetooth definitions the checkbox for pairing is disabled. The only way to connect again is to reset the I-mate.
Please help me.
Thank you
I use Dopod 838 pro. My wired headset can not use. I don't know why. could you please help me ? I uses adapter to change the mini usb to 3.5 jack. is it the reason my wired headset didn't work ?
Does the original headset with mini usb work? And can you charger your phone?
If answer to both is yes then your adapter is faulty.
thanks. I sure mini usb port is ok. for the orginal headset... I dont have so cannot check...but the adapter is good . It is not the reason. i want to know if the software control the headset or not ? or regedit ? ...