hi,
just when i thought the 91% loading thing was a problem... here comes another one.!
recently i updatd the ROM it is now 1.52.00WWE , ROM date: 10/23/03, radio version: 1.10.00, Ext rom version: 1.03.29
after the update i realise that the following problems have occurred..!
1. Activesync is recognizing the machine initially as ctota ( default name of my imate) but getting connected as guest. i am not able to make a standard partnership
2. MSN messenger seems to be just an icon.. it doesnt open up
3. Voice command has been corrupted and does not open..!
all this of course happened after the xback up and restore happened in my sandisk 512
not sure if this a problem with the rom update or otherwise..!
did anyone face this problem before?? or is it possible for anyone to gimme a solution...!
regards,
cherish tota
when i updated my rom the same thing happent to my msn messenger
it turned out that it were because when it sync'd it got some bad stuff from the messenger update for 2002 and when i uninstalled the messenger update and installed the messenger update for 2003 it fixed it
hi,
the msn update id understand.. but what im not able to make sense is the default guest profile.,... usually asks me... if a guest machine comes to sync with my laptop if a standard relationship / guest rltnship is to be made...
also that while booting my comp showing that it cannot open activesync...!! rather surprising..!
any advice??
cherish
cant you setup a new patnership which is not a guest ?
no dude.. not able to do an active partnership at all..!!
as stated earlier... it is going in as default guest...!! HELP..!!
all my s/ws worldmate pro.. avantgo..satPPC and ofcourse the outlook is nto getting synced..!
cherish
i would uninstall and reinstall activesync and outlook
making sure it's version 3.7.1
ctota,
I am having exactly the same problem.
My XDA II synchs as a guest.
Did you figure out how to solve this problem?
regards,
Bosoud
I have found a way out!!
1. Go to Active sync without connecting your device then delete all partnerships available.
2. Connect your device and create a new partnership.
Thats it.. :wink:
read more: http://www.softick.com/news.html#83
Re: Softick Card Export II version 2.11! Now working on Wiza
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Re: Softick Card Export II version 2.11! Now working on Wiza
bolasz said:
dddrko said:
read more: http://www.softick.com/news.html#83
Click to expand...
Click to collapse
It still makes my wizard to lock up...
Click to expand...
Click to collapse
It works for my 838.. I have lockup and unable to switch to SDcard mode only if I connected to my PC and activesync once and unplug. But that seems to be the activesync issue in my 838 which fail to free itself from unplug from PC. So it cannot switch to SDcard mode..and prompt me an error message.
I have already switch to AS4.1 but does not improve my situation.
What is Microsoft doing here?? :roll: A soft reset is the only way to get my device syncup again.. :x
I own this program since I had my XDA mini ...
finally I can use it again to copy some files to my pda and use it as a memory stick...
I also noticed some problems:
1. after I connect the USD cable and the PC recognized my pda as a memory stick, Windows XP asked me to make a reboot in order to be able to use the new 'harddrive'
2. after I copied a .jpg to my pda it looked like the storage card is no longer recognized by WM5. The icons of the shortcuts to programs I installed are missing and I cannot browse with TotalCommander to my storage card.
After disconnecting the USD cable, my storage card could be found again - is this a bug or a feature?!
After the first connect in mode 'Card Export' I switched to 'Active Sync' and the synching went on without any problems.
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
This looks also to me like an incompatibility between card export and active sync.
Hmpf ... rebootet the phone and connected - voila - my Wizard was again properly verified as Memory Stick and I again could upload another .jpg to my device.
It looks definately unfinished ... but it is working quite acceptable to me, though there is a lot room for improvement, it will get the job done, if I need a memory stick 'on the go'.
My device is a HTC Wizard, O2 german.
i may be wrong on the second point, but activesync alters a file when you transfer it to the pda,
so if you transfer a file to the card (even using a card reader) then put the card back in the pda wm5 will not recognise it properly.
point 1 should only happen the first time of detection.
have no problem with my XDA II...
Chris09 said:
After agains swithing to mode 'Card Export' my Wizard gave an error message, as follows:
"Cannot switch between Card Export and Active Sanc modes. This may be because of missing dlls or corrupted registry entries."
Click to expand...
Click to collapse
I am experiencing the same... Please update this topic if you'll find a solution.
i'm having the missing dlls dialog problem too.
I noticed that once you activesync'ed, you can't switch to card mode and need to reboot the device.
However, mine can't seem to work anymore. It won't even switch. But I also tried disabling my today's screen (pocket plus and pocket breeze) and it works... but only the icon manage to change. My PC can't detect it as a mass storage device though.
Any luck?
Mine is working fine, I got that dll message once but a soft reset fixed it.
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
eilz said:
vmirage said:
Just wondering what roms are you guys using that works with softick? I'm using rom version 1.6.7.1 WWE which doesn't seem to work. I tried hard reset and install softick on the first reboot. The computer detected a new hardware but failed to install the device.
Click to expand...
Click to collapse
I get exact problem, detects a HTC device, trys to load the USB Mass Storage Device, hang for a short period and then in Device Manager show up with a problem. Fails to install or display drive letter for SD Card in phone. Have tried everything, happens on XP and Windows 2000 PCs, tried various PC's, same problem.
Can anyone help
p.s - I have the T-Mobile MDA Vario phone, same as imate-kjam I believe.
Click to expand...
Click to collapse
Same here too!! using ver 2.12
ver 2.11 worked fine with me, so most probably I will downgrade to it now.
I emailed the tech support and waiting for their reply. I will post it here in case I get anything new.
I just tried v2.12, and it didn't work. I found v2.11 on some download site, and installed it. v2.11 worked fine on Qtek's 2.8.7.1 ROM.
I cant get this to work either using 2.12. I get the device manager problem as mentioned previously. Does anyone know where can i get 2.11 from?
found it here:
http://www.softick.com/files/CardExportPPC211c-softick-en.zip
but i get the same problem
You can find previous versions in the "download" section on the left.
I'm having the same issues, used to work fine with 2.11, then it stopped being able to write but could still read (this is on my Mac), and now with 2.12 I can't even get the thing to mount. I'm talking with the developer to see if we can get a fix.
Any 2.12 and 2.11 not working for me... My computer and three others shows me message that they don't have drivers
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
pewe said:
I posted a query on their forum.
Heres their reply:
http://softick-forum.com/viewtopic.php?p=35#35
Click to expand...
Click to collapse
I'm a bit confused regarding their reply.
You asked a question about the Wizard and they replied saying they are waiting on delivery of HTC Universal to examine it better. I'm not sure what the Universal has to do with compatibilty for the Wizard as they are completely different devices with different hardware. (Mybe i'm wrong and the hardware components that Card Export uses is actually the same on both devices)
Puckster -
I noticed this on second look, and asked for clarification.
just want to inform everyone that there is a free alternative. it's similar to softick card export that it turns your device into a plug-and-play card reader. it's called wm5torage (yes, the number '5' is the letter 'S')
http://forum.xda-developers.com/viewtopic.php?t=45411&highlight=wm5torage
it does not have the system tray icon that enables you to switch between activesync and export mode, but rather you open the app in your accessories folder and activate/deactivate it from there.
but hey, it's free and it works
Hi,
I have had my Iwzard for a week now and have this porblem with applications not installingon my wizard. I tried downloading low CPU Skype for pocket PC the from http://www.skype.com/download/skype/mobile/download.html - my Wizard says its not a valid application.
Downloaded Total Commander from:
http://www.ghisler.com/pocketpc.htm ( the ARM/XSCALE/PXA version)
still could not get it to work.
Downloaded pocket doom from some site, did not work either. Always the same message...
And still I was able to download and install the agile messenger program..
It is the skype that has me worried. If you have any suggestions, please let me kow. Thanks!
What ROM do you have installed ?
Where do you install the application - your internal storage or to a storage card ?
I've had this once, and a reset helped me install.
You need to run the install program from a location on your PC through active sync. You can not install it directly from the phone.
dummy me
Sorry guys, this thread was a complete waste of forum space. Turns out as I was still new to this device and the way it functions, I never realized I need to run my programs on the desktop computer and they would install via ActiveSync on the PPC. Don't get me wrong I did my research but not a word on this issue. Not surprised though...people regard that as common sense )
Thanx for answering anyway, apologies for the dumb question!
I have upgraded my BA to WM6 but when I tried to sync, the error prompt keep comes out "insufficient memory" and ask me to reset my BA. However, after reset again and again .. still could not sync.
Any clue ?
thanks
qq888 said:
I have upgraded my BA to WM6 but when I tried to sync, the error prompt keep comes out "insufficient memory" and ask me to reset my BA. However, after reset again and again .. still could not sync.
Any clue ?
thanks
Click to expand...
Click to collapse
how much Active sync Version??
Please Use Active sync 4.5
it is MS ActiveSync 4.5 already.
Another problem is when I switch the BA into serial mode, the activesync could not recongnize the connection and I could not downgrade it back to WM5 .... pls any help ?
1. did you kill the AS processes on PC before cradle the phone?
2 did the serial from the phone screen has change to USB on connect to cradle?
Try disabling the firewalls...
I have the same problem. I check memory on the phone and the phone memory is virtually nil! I have installed everything possible into th e2GB storage card and I think the problem is the size of the mail file. I have my attachments already sent to the storage card but can you also send the mail messages there too? - or get memory memory...??
I think, Your Windows had a proplem. You should install Your Windows
i have just downgraded from WM6 to WM2003SE (o2 XDA offical rom 1.40 for AUS) and i cannot sync the device.
i have completely set the device back to it's original state, ext rom, main rom, radio rom. it works fine.
i receive an error when i try to sync with my laptop.. (which it used to sync with when i put WM6 on the device).
the error is - cannot verify the version of activesync on your device, a program such as a firewall may be blocking a port activesync uses to connect to your device, you may need to upgrade to a more recent version or activesync
i have removed activesync, deleted all the registry entries, folders and files relating to activesync that i could find. reinstalled activesync, still no luck.
-> i can get the device to sync with my desktop without any problems (i never used the desktop to sync to it when WM6 was installed)
however all my data is on the laptop.
Any ideas ?
what version of activsync are you using??
i think with WM2003SE an older version of activsync is required.
i'm using activesync 4.5 and it has worked before..
it's like the laptop still thinks it's WM6..
the PDA will sync on the desktop (which i don't use) but won't sync on the laptop which has all my data.
Does anybody know what the value of the registry entry under
HKLM/software/microsoft/windows CE services/version should be ??