I'm creating a CAB file with _setup.xml. Is there a way I can automatically launch an application withing the cab file after or during the install?
Also, is there a way I can get a list of the verbs used in the _setup.xml. I've been unsuccessful here.
Thanks.
You can't launch an app using _setup.xml
Basically what you can do there (sorry I don't have a link to a full list) is to copy files, create shortcuts and add / change registry. This is all that cab installer knows how to do.
If you can code c++ you can add a setup.dll which has 4 functions that are automatically activated:
1 - before installation
2 - after installation
3 - before uninstall
4 - after uninstall
You can use that to do whatever you want.
Thanks for the quick reply. Any links on more info on Setup.DLL?
Can't you just create a process from within the setup dll on the after install message. I have not tried that but I have been able to do just about everything I can think of from a setup dll (ie edit registry, manipulate files, create dialogs draw stuff). If you know the location of what you want to run it should be easy.
I have only created cabs the old way, so to search for that google cabwiz.
I have this document about it (i can't remember where it comes from), log in to get it attached.
Related
Got some files in a CAB I want to install on a number of units. I would "like" to create an installer that I just double-click on desktop & it installs via ActiveSync - simple. But I'm not a programmer - what would be the best way to do this? Prefer not to copy via explorer & click the CAB on the XDA unit & others may be doing this, so trying to keep it simple. Ideas/recommendations?
I brought Natural Installer a few years back and it has been the business. It is very simple to use, all with a windows interface and creates a single exe as you say that you just double click on to install.
Have a look here :-
http://naturalinstaller.com/
The site does not mention 2003, have you had any problems with that?
Can you define install location? SD Card
How does it deal with chaty cabs (those that want input).
I've had no problems with PPC2003, why don't you download the trial version and give it a go. Post a reply on this thread as to how it works.
As for chaty cabs I think you can make your own setup.dll but I don't know how to and have never done that.
All I wanted was a basic setup that could make directorys, copy files and set some default registry keys as needed, I found that Natural Installer did that very well. As for more advanced stuff I don't know - but as written trial it.
Well I downloaded it and played with it.
For me it seems to be a WinCabManager type appliction.
Yes you can copy files, set reg entries, make dirs, add icons.
All of this seems doable.
What I was hoping for was a selfextracting file that installs a few cabs and not the content of them.
With the BlueAngel you can set up a autorun that runs a list of cabs in the config.txt file. However for this you need to hack the reg to set the pointer for the autorun and config.txt.
I was hoping that this would be more down the lines of cabinstaller that allows you to define which cab you want were but alas does not allow you to define a list of what cabs you want in what location.
So problem for me not solved but thanks for the tip.
Hi Dave
Personally I use NSIS (Nullsoft Installer) - it is basically a very customisable installer which can be scripted to look like any other installer in existance, or you can make it look totally unique to you!
Another great thing about it is that you can make it install multiple cab files at the same time (it's just a case of calling ActiveSync with the cab file you want to install).
Best of all... it's free
Pope <><
I want to deny or restrain installation of applications on the fly as an service/process or by making changes in the registry on WM5 devices. Any ideas? The app preferely in C++/C#
CAB files are installed by wceload.exe in the windows directory.
You can overwrite this file with a blank exe, or remove the CAB extension reference to it in registry under HKEY_CLASSES_ROOT.
Deny or restrain inst. of apps
Thanks, yes I've thought about this - but this isn't a very dynamic solution. When a person run a CAB I want to check if app is okay to install from a "List" - then show a popup with a message saying something like "Sorry, you are not allowed to install this application. Please contact your company IT Admin for more info".
Is the .CAB association in HKEY_CLASSES_ROOT linked to wceload - so I could run an app to validate CAB, and if ok execute wceload..?
levenum said:
CAB files are installed by wceload.exe in the windows directory.
You can overwrite this file with a blank exe, or remove the CAB extension reference to it in registry under HKEY_CLASSES_ROOT.
Click to expand...
Click to collapse
Write up a registry entry in HKEY_CLASSES_ROOT to associate .CAB files with your custom file. Then, when the user taps on a CAB file, your program reads it, compares it against its list and, if it's approved, calls WceLoad with the appropriate parameters.
The key would probably look something like this:
HKCR\cabfile\shell\open\command
(default) = "<path to your app>" "%1"
(%1 will be replaced with the path to the CAB file).
Then, if the CAB was approved, call WceLoad with the following parameters:
\windows\wceload.exe "<path to cab file>" /nodelete
Note that some apps, may call wceload.exe directly. I am not sure if Activesync does it, but I know a couple of custom installers that do.
If you really want to secure the device against unothorized software do the following:
Rename wceload.exe to something else like wceload1.exe.
Create you own wceload.exe, but make sure you capture and preserve all command line parameters in case you need to transfer them to the original file for proper installation.
This way you can be sure no one will install anything without your permission.
Olso, keep in mind wceload is used to switch themes as well. (It handles *.tsk files).
Very much..
Thank You all!!
Hi all,
I have a cab file (call it cab1) containing three files to install on a WM5.0 device. These three files are another cab file (call it cab2) and two config files. I drop cab1 onto the device and it executes. This puts cab2 and the two config files into the correct folders that I want. This is all fine
What I need to happen then is for cab2 to auto execute without anymore interaction. How can I add this instruction to cab1?
Dropping cab2 into the startup folder and waiting for the device to soft reset is not an option for me
The whole install needs to happen on the device by sending a single cab file to the device i.e. I cannot use any msi etc to install over ActiveSync
I've created the cabs in VS2005
Thanks for any help
This one is tricky. You need to create a setup.dll for cab1 then have it launch an exe and exit. The exe will wait about a second for th cab installer to complete then launch the installation of cab2.
i believe this is the only way to accomplish what you want with one cab without combining the content of cab1 and cab2 in to a single cab.
Thanks levenum
Combining the cabs is what I would like to do but cab2 is signed so I can't unpack it without breaking it. That's why I went down the road of putting it into another cab with the other files I need to install
Is there a way to add a post-install command to launch cab2 in the setup.dll of cab1(or anywhere else)?
What levenum means is that you can't launch the installation of the second cab from the first one. The reason for this is that only one instance of wceload.exe can be running.
You need to build a setup.dll in the first cab file. The first cab must also have an exe that will install the second cab file. You launch the exe from the setup.dll. The exe must wait until wceload.exe has shut down after installing the first cab before it can install the second one by running createprocess on wceload.exe with the right arguments.
If you don't know how to make the setup.dll, take a look in the Windows Mobile 5.0 SDK. It includes an example on how to do this.
Did you get it?
Øystein
I try to create a program which consists of
.asx files (to show online tv channels),
.lnk files (shorcuts to the .asx files) and
a .dll file which contains only some .ico files (icons of the tv channels).
I added all these files to a cab using WinCE Cab Manager and tried to install it on my ppc. So far so good. The problem occurred when the message “The program can not be installed. Choose another location” appeared during installation, just after the process bar was filled.
Although I have no idea about computer programming, I have created many cab’s with WinCE Cab Manager for skins I have created for several programs. Anyway, I realized that the problem occurred due to the .dll file, since this is the first time I add such a file in a .cab.
I created my .dll file using a .dll from another program which had only icons in it, as well. I deleted them using Restorator 2007 and I had an “empty” .dll sized 4KB. Then I added my icon files using XN Resource Editor.
I searched the Internet to see what might be the problem with the .dll and I found out that I have to “register” my .dll file. I really have no idea what this means but it needs to be done. I also found an option in WinCE Cab Manager for “self-registering” file, but it didn’t work either.
So, the question to you dev guys is how can I register my .dll file, or should I create it from the beginning with another way?
Please help! Thanks in advance!
sorry to repost but it seems that posts keep coming in this forum and this thread is already in the second page and I'm afraid that noone will see it and reply to it. By the way, is there any special sub-forum for such questions?
This may help. I use his instructions to edit existing DLL's
http://www.modaco.com/content/i9x0-...88904/lisbian-taskbars-for-i910/#entry1023568
It will unsign the dll which will probably fail on your custom dll but it should sign it when you are done editing.
NilsP
Many thanks for your suggestion but unfortunately it didn't work for me.
As you said, this is mainly for resigning already signed .dll files.
Any other help will be appreciated. I can attach it here if anypne is willing to help. Or just tell me the way. Thanks!
I deploy a few dll's with my app, without any problem. If the installer complains about the location, what did you specify where it should go?
There are 2 approaches to solve this problem:
1.) If you have a private key to match a certificate in the device's certificate store, sign the .dll and .cab with this private key and it will be installed with elevated privledges, and be successful. To facilitate this you can install the "SDK Certificates" - and sign with the matching private key (you should be able to find these on a search, term "SDKCerts" or similar)
2.) Look for an "Application Unlocker" or other security reduction tool, run it, and you should be able to install the cab. On this note, if you check here, it will give you a more technical overview of the security policies. You want to change 4101 / 0x1005 to "SECROLE_MANAGER" (8) - which tells the system to install it with elevated privledges. Also make sure 4102 / 0x1006 is set to 1 to allow unsigned applications.
6Fg8
I don't believe that is the location I specified that causes the problem because when I deleted the .dll file from the .cab, it was installed properly. How do you create your dll files? With programming or you just edit existing files? If I send you my .ico files, will you be able to create the .dll file for me?
Da_G
Thanks but both approaches seem very complicated for me!
So, will I need Visual Basic in order to do this or is there any easier way? Can anyone sign the dll for me?
angelos_cy said:
6Fg8
How do you create your dll files? With programming or you just edit existing files? If I send you my .ico files, will you be able to create the .dll file for me?
Click to expand...
Click to collapse
Yes with programming, C++ or .net. Never had any issue with signing. I can try to make a dll if you send me the icons (or post them here if they aren't too secret ).
6Fg8 said:
I can try to make a dll if you send me the icons (or post them here if they aren't too secret ).
Click to expand...
Click to collapse
I have sent them to you by pm. They are not secret at all but I will create a "program" (wannabe ) with that dll and I want that program to be a surprise for users of the forum where I'll post it. I may post it on xda too, but it's nothing important.
Many thanks!
angelos_cy said:
The problem occurred when the message “The program can not be installed. Choose another location” appeared during installation, just after the process bar was filled.
Click to expand...
Click to collapse
This happens because you've changed resources in signed file, which changed file checksum and invalidated it's signature, and Windows installer refuses to install file with invalid signature. But it won't refuse to install this file WITHOUT signature at all - so use unsigner (search for it on XDA) to remove signature completely; if you encounter error, try to remove signature from original (unmodified) file, and then change resources in it...
6Fg8
the_ozyrys
Thanks to both of you!
6Fg8 has created and signed the dll for me and it finally worked, but I also tried the_ozyrys' method and it also worked.
So thanks to baniaczek too, since he created the unsigner.exe.
Everything worked fine with the dll. Now the cab is installed properly.
However, I have another problem. Just after the installation of the cab on my ppc, it seems that the device freezes for about a minute. This is propably because my cab contains a lot of shortcuts (.lnk files) that go under Programs folder.
So, I would like to ask for another favour, if it's possible. As I said I intend to give this cab to others too. Since this delay can make them believe that my program has freezed their device, I would like to make the cab restart the device just after installation and after uninstallation as well. I think this is made with the "Setup.dll" which I don't know how to create.
If anyone knows how to do this and has the time for it, could you please create this setup.dll for me. If the cab is needed to do this, just tell me to send it to you.
Thanks in advance!
Anyone? Plzzzzzzz!
If you want to sign .dll or .exe u can use the apps posted in the two posts below
http://forum.xda-developers.com/showthread.php?t=432041
or
http://forum.xda-developers.com/showpost.php?p=3530246&postcount=18
raykisi
Thanks for your answer but 6Fg8 and the_ozyrys already helped me on that.
My question now is how to create a setup.dll in order to make my .cab to prompt the user to restart the device after installation and uninstallation. If anyone can do it for me, I can send you the .cab which I alreday created and you can add the setup.dll with those functions.
Gurus,
I tried searching for this but in vain. I keep flashing all the great roms posted here frequently. And every time i have to configure my email accounts from scratch and this is a real pain. Is there any way to backup the settings like we do in PIM backup and restore upon reflashing the ROM'S?
Help greatly appreciated...
Thanks,
Raj
prudviraj said:
Gurus,
I tried searching for this but in vain. I keep flashing all the great roms posted here frequently. And every time i have to configure my email accounts from scratch and this is a real pain. Is there any way to backup the settings like we do in PIM backup and restore upon reflashing the ROM'S?
Help greatly appreciated...
Thanks,
Raj
Click to expand...
Click to collapse
Same here, what is best method to backup & restore phone settings regardless of what ROM we are using.
What about Microsoft my phone?
get makisu from HERE
(its a plugin to sashimi, but it will run standalone too)
run it, (it may take a few moments to start, be patient) enter your account details, add as many as you like, including wifi settings
tutorial video HERE
copy the xml file it creates (created mine as program files/makisu/makisu.xml)
get the microsoft cabinet sdk from HERE
extract it, and in the BIN folder is an .exe file called makecab.exe
I coppied that file out to its own folder, i dont use anuthing else in the sdk.
put makecab.exe and makisu.xml in a folder together, rename the xml to _setup.xml
open a command line window, and browse to that folder.
(Useful tip for vista/7, with the folder open on screen, hold shift and right click, you will get the option to 'open command window here')
issue the command
makecab /D COMPRESS=OFF _setup.xml mail.cab
(set mail.cab to whatever.cab name you want)
Thats it, copy the cab to your phone and run it when you need to set up your email accounts (and wifi if you set that too, very handy, i've automated 5 email accounts and 3 wifi networks)
(You could also just stop at the xml stage, and next time you hard reset, instal makisu and then choose 'provision xml' and browse to the makisu.xml file and it will install the settings.)
@samsamuel - I've just found this post (after searching for "rename email account"!!) and it's awesome.....just what I've been looking for!! Now I can reload my mail settings whenever I flash....assuming I can find a way to rename the current (incorrect) mail account I just added, otherwise I'll have to go for the delete/re-create option
Thanks again for posting about "makisu" - shame I have to register on yet another forum I'll never use just to get it....unless it's hidden on XDA somewhere?
Mark.
This is all that you guys need.
This will take care of provisioning for Wi-Fi Configs, Email Configs and Certificates.
leepriestenator said:
This is all that you guys need.
This will take care of provisioning for Wi-Fi Configs, Email Configs and Certificates.
Click to expand...
Click to collapse
After you make the xml with the program, how do you access it on the phone for restoration of settings? I don't need it right now but I am making xml's since I have had to hard reset my phone 4x already (and not because I was flashing a ROM) and re-creating all the settings is such a pain. I read into the sashimi and makisu but those apps make my head spin. There has to be a simpler way. Thanks in advance.
Edit: I think I got it. Either I use Makisu to access the xml or make the cab using the post above. If I make the cab and I want to use Quick cab (since it is much easier to use), where does the file install? \Windows?? It was unclear from the previous post since the instructions are for a different cab making utility.
k8sh said:
Edit: I think I got it. Either I use Makisu to access the xml or make the cab using the post above. If I make the cab and I want to use Quick cab (since it is much easier to use), where does the file install? \Windows?? It was unclear from the previous post since the instructions are for a different cab making utility.
Click to expand...
Click to collapse
it doesnt install any files anywhere, not in teh way you mean, its just setting/changing/applying settings. Think of the xml file as a script that makes changes as it runs.
For me, i have makisu in my autoinstall folder, so it gets installed at hard reset, and i run teh xml file (also on my sd card) manually when i am ready to apply it. (I flash a lot, so sometimes i dont want email setting up, because i am gonna flash again in a few minutes).
I no longer bother creating the cab, because with the xml file you can just open it in notepad and add anotehr email account, make other small adjustments, whatever, which you cant do with a cab, you have to rebuild the whole thing from scratch. (for some reason wince cab manager cant open that cab.)
Well if you are on a custom rom, every chef support some form of UC or the other (User Customization).
In addition to Sashimi / Makisu you can also use SDConfig.txt & XDA_UC if your ROM supports it.
Google them and you'll find more info.
This looked like it would do the trick. When I run it I get a visual basic error. I have netcf v4 installed. Is there another file required to make this run?