Related
I currently have my wizard setup as a moden to feed my laptop internet via bluetooth and it seems to work quite well but my laptop does not have bluetooth so i am forced to use an adapter which is sort of a pain. is it possible to do something similar with wifi? i cant seem to make it work.
any help would be appreciated.
Derek
u would have to set up and Ad-Hoc connection between your wizard and laptop and set internet connection sharing over that connection.
is it possible to enable ICS on WM5? i looked through the options and i culod not see it. are there any programs out there that do it?
This is perhaps a slightly obscure and probably impossible thing to do.
Basically, I want to be able to use the Alpine (xda2i) like a wireless modem/router, and browse internet from a PC. The laptop has wifi but not bluetooth. I don't want to use a USB connection.
Firstly, I would need to set-up an ad-hoc wifi connection between the laptop and the Alpine. I have been unsuccessful at this so far. Could I have some guidance please?
Then I need a program to bridge the wifi and GPRS connections. The "wireless modem" utility which came with the Alpine does this for USB, IR and bluetooth, but not for wifi. does such a program exist?
Thanks in advance,
its possible, however, primitive. You can get web access only (unless you want to add code to the gateway software to support your specific ports), and it requires a damn jvm as well as reconfiguration of the laptop every time you want to use it after having gone back to your old connection software. its more useful for two pda's, one which will always use the alpine as its web host. Anyway, check it out:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=453&more=1
pretty easy to set up, I had it running in about 5 minutes, albet not very useful via my gprs connection. enjoy
If someone could please tell me how to - or point me to a thread with instructions to teather my Mogul to my latop so I can use internet?.. I understant that it can be dont without the data plan but I cant find any instructions anyplace.. I tried internet connection sharing but keep getting error 67 when tryimg to connect.. can anyone help me please??
Kobejim
Kinda new to the board so If you could send me a private message I might be able to find this again.. thanks
Have a look at chainfire's app which allows you to do it through wifi:
http://forum.xda-developers.com/showthread.php?t=341398
Wi-fi only?
This link appears to be wi-fi only.. will it work with the Sprint Network.. ?
Yeah, what it does is convert your Mogul's WiFi into an access point. Your laptop will access your Sprint connection as though it were connecting to your wireless router at home.
if my laptop is wireless?
I wouldnt need to use my phone if my latop is Wi-Fi.. Guess what I was wanting is a way to use my laptop using the sprint network, for when I cant get Wi-Fi.
I thought is was possable but I must have been mistaken
kobejim
kobejim2 said:
I wouldnt need to use my phone if my latop is Wi-Fi.. Guess what I was wanting is a way to use my laptop using the sprint network, for when I cant get Wi-Fi.
I thought is was possable but I must have been mistaken
kobejim
Click to expand...
Click to collapse
This is the point. Your Mogul will be your WiFi access point that will use Sprint internet connection. This is for when you CANNOT get WiFi with your laptop.
OMG !
I'll try it one last time...
1. Your laptop (as you just confirmed) is capable of receiving WiFi.
2. Your Mogul receives Sprint's data connection.
Unless you are not aware, your Mogul is also capable of receiving WiFi (like your laptop). What chaninfire's program does is make your Mogul capable of SENDING a WiFi signal while connected to Sprint so that your laptop will receive it. Your laptop will be connecting to Sprint's network through Mogul's WiFi signal. In other words your Mogul becomes a wireless router.
OK. i get it... Sorry.. was confused
Didnt mean to sound like a idiot.. but I was lost thinking that I could only use Wi-Fi.. But now know I can connect to the Sprint network and using wi-fi to connect my Laptop make perfecr sense.. now if I can just figure out how to get it working.. I'll take a lok at the like you sent me.. If I remember it looked confusing but I'm sure its not as bad as it looks... thanks a lot
Kobejim
The program is super simple. I use it to connect my iPod Touch to the net.
dragon_76 said:
The program is super simple. I use it to connect my iPod Touch to the net.
Click to expand...
Click to collapse
If you follow the instructions you will also unlock the internet sharing app. Once you have followed the instructions in the thread about chainfires app, to share your internet over USB,do the following.
1) terminate the activesync app on your handset
2) Run the internet sharing application
3) As soon as its done connecting,plug in the USB cable.
4) Enjoy the internet. A similar procedure can also be used to connect via bluetooth,but you get better speed over USB or via WiFi.
If you want to use wifi,you can either follow the adhoc method listed in the thread,or you can use a wireless access point. To use a wireless accesspoint,set your WAPs local IP address to 192.168.0.2 Internet connection sharing will want to be 192.168.0.1 Now you need to connect your mogul to the WiFi network,and connect your PC to the wifi network. Go into the network properties and set your pc to 192.168.0.x where x is an unused address. Set the gateway and DNS servers to 192.168.0.1 and your on the internet. As far as I know,this should work with multiple computers on your network,and it will connect up easily and seamlessly when you flip the wifi switch on your mogul.
From the WMWifiRouter topic:
Sprint HTC Mogul/SERO Notes
It seems Sprint is up to shenanigans in regards to tethering for SERO users. Those of you running Sprint ROMs should navigate to the following registry key "HKEY_LOCAL_MACHINE\Comm\InternetSharing" and delete the string value named "Extension". This will allow you to connect to the Internet via the Internet Sharing app without the dreaded error 67/authentication errors. Previous to this fix, Mogul SERO users would have to connect to the Internet via another method (such as starting Internet Explorer first) before pressing the Connect button in the the Internet Sharing application.
If you're really paranoid (it has been concluded these entries have no meaning when using Internet Sharing), using a registry editor, navigate to the "HKEY_LOCAL_MACHINE\Software\OEM\WModem" key, and set the "CheckProfile", "Multi-NAI" and "WModemDUN" DWORDS to a decimal value of "0".
Click to expand...
Click to collapse
WMWifiRouter does this for you automatically, but that isn't much help if you want to share via USB instead of WiFi. The above solution should work with USB as well, and the error 67 goes away. GL
on internet sharing... should it be set to phone as modem or sprint pcs?
kobejim2 said:
This link appears to be wi-fi only.. will it work with the Sprint Network.. ?
Click to expand...
Click to collapse
With the Mogul you can have your Wifi card on and still be on Sprints EVDO network at the same time. Basically you are broadcasting the EVDO connection wirelessly. I use it on my laptop and get pretty good download speeds. It pretty much like using the Sprint EVDO connection data cards...You have to go into the adapter settings under the connections tab and give it a static IP address (ie 192.168.1.9)
Work with Verizon?
It seems like all of the posts speak about Sprints network, do these methods work with Verizon?
Are there any methods specific to Verizon?
I just signed up with for a SERO account and have one major question regarding the wifi router app... Does it put the phone into "tether" mode? In other words, will sprint be able to detect that you are sharing your connection or does it simply bridge the phone's EV-DO connection to its wifi connection?
armstrom said:
I just signed up with for a SERO account and have one major question regarding the wifi router app... Does it put the phone into "tether" mode? In other words, will sprint be able to detect that you are sharing your connection or does it simply bridge the phone's EV-DO connection to its wifi connection?
Click to expand...
Click to collapse
It's a bridge but Sprint can always detect it if they wish. A guy over in the WMWifiRouter topic says he has been tethering for quite a while this way and hasn't gotten a bill for it.
Oh So simple.. Bluetooth connection
Well I Got my Mogul like 2 months ago and just stumbled across the internet sharing app and to my suprise it worked.... No Xtra software required
I have a macbook 13'in w 2g ram, bluetooth and all that. I use my mogul with my mac and it works like a charm wish i had EVDO in the area but it is good for now....
Step one: Pair your mogul with your computer.
Step Two: Make sure you Have a connection to the net on your mogul. Use ie to go to a page on your phone (otherwise it will say your username and pass are not right)
Step Three:Open internet sharing on your mogul. Make sure your PC connection is: Bluetooh Pan and the Network connection is: Sprint PCS
Step Four: Tap the connect tab on your phone
Step Five:After the internet sharing has a connection to the net, go to the bluetooth settings on your computer, Select you phone and connect
There you have it Tethering VIA bluetooth with no Xtra software.
here is a question.....what if i need to connect a desktop to the internet using the mogul? how do i go about that? everything is about wifi and there seems to be nothing about connecting a desktop to it.
can someone give me pretty detailed instructs on how as i have never done this before.
thanks
I use pdanet for Verizon Titan. It works very well and simple. Simply connect through usb or bluetooth and bamn..you are connected. It also does not charge you any tethering fee....but acquiring pdanet is a cost unless you can find it somewhere....
problem is I dont know how to "simply" connect through the usb. Im pretty ignorant where this stuff is concerned. is there any free ware that does what pdanet does? not that im a cheapO but hey money saved is money earned right?
this may sound crazy..
when i conect my htc621 to my PC.. it gets internet access.. so i just wanna know if theres any way my htc can share the internet access via Bluetooth to other devices..
such a nokia N-gage, a 3250 and a Palm Lifedrive..
the thing i want is that my htc becoming some kind of router (dunno the language) ..
this is possible??? and what soft do i need ...
Short answer, yes.
Long answer, probably not.
Theres two ways that I know of accomplishing this:
1: Both devices must support Bluetooth PAN (Personal Area Networking) profile, then the built in Internet Sharing application can share your internet connection with another device, I use this regularly when travelling with my laptop. Concievably it could be used to share the connection with any other Bluetoon enabled device that supports the PAN profile.
2: I spotted an application recently that claimed to allow the handheld device to be used as a wifi router. I had only very minimal success when I tried it our, as I recall it presents itself as an Ad-Hoc Network, then routes all the traffic out to the internet via the GPRS/3G connection. A good proof of concept, but for me of limited value. This will require the device you want to connect to the internet to have WiFi capability.
I hope this is useful, but I realise now after writing all this that your question doesnt specifically describe the connectivity you want to achieve.
Cheers!
nid
Just found the application, here is a link:
http://www.freewarepocketpc.net/ppc-tag-router.html
I just got a Tattoo.. I think new users have always problem.
Somebody help me for the following:
1. I want to access internet at home on my laptop running Windows 7 by TETHERING with my Tattoo GPRS(EDGE). Is that USB connection and selecting 'Mobile Network Sharing'?? But I am still not able to success.
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
thacen said:
I just got a Tattoo.. I think new users have always problem.
Somebody help me for the following:
1. I want to access internet at home on my laptop running Windows 7 by TETHERING with my Tattoo GPRS(EDGE). Is that USB connection and selecting 'Mobile Network Sharing'?? But I am still not able to success.
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
Click to expand...
Click to collapse
Thank you everybody. I resolve my 1st problem. Yes, it is just USB connection and selecting 'Mobile Network Sharing'. My problem was because of not able to install the NDIS driver properly. After resolving the driver problem it is working fine.
But I am still looking for my 2nd problem RETHETING
thacen said:
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
Click to expand...
Click to collapse
I'm not sure if it will work that way... I know with a Windows Mobile device you can, but never tried under Android. Perhaps there is an option somewhere in the HTC Sync program?
There definitely isn't an option in HTC Sync to do this. In fact, I don't know of any way of generically sharing your internet connection over USB. If your work PC has a Wi-Fi card, you could easily share the internet connection over an ad-hoc network.
Edit: In principle, you could also share your internet connection over Bluetooth but I'm pretty sure the Tattoo doesn't support the necessary Bluetooth profile(s) for such connections.
check out this gadget http://usb.brando.com/prod_detail.php?prod_id=00805
Ali 24789 said:
There definitely isn't an option in HTC Sync to do this. In fact, I don't know of any way of generically sharing your internet connection over USB. If your work PC has a Wi-Fi card, you could easily share the internet connection over an ad-hoc network.
Edit: In principle, you could also share your internet connection over Bluetooth but I'm pretty sure the Tattoo doesn't support the necessary Bluetooth profile(s) for such connections.
Click to expand...
Click to collapse
I think Wi-fi ad-hoc connection is for rooted androids only and I don't found any rooted tattoo till date. I tried another option, using Connectify on my Windows 7 laptop and sharing Wi-fi. But still unable to success browsing, eventhough my phone can be connected with my Laptop through this connectify.
Anybody have success browsing it kindly share.
thacen said:
I think Wi-fi ad-hoc connection is for rooted androids only
Click to expand...
Click to collapse
Uh, what? I'm sharing my internet connection over Wi-Fi with my MacBook right now and my Tattoo can connect to it and access the internet just fine.
Edit: You're probably thinking of android-wifi-tether, which lets you share your phone's 3G/2G mobile connection via Wi-Fi or Bluetooth.
Edit2:
MiSSigNNo said:
check out this gadget http://usb.brando.com/prod_detail.php?prod_id=00805
Click to expand...
Click to collapse
That gadget won't help. How is a phone supposed to make use of it?
Ali 24789 said:
Uh, what? I'm sharing my internet connection over Wi-Fi with my MacBook right now and my Tattoo can connect to it and access the internet just fine.
Edit: You're probably thinking of android-wifi-tether, which lets you share your phone's 3G/2G mobile connection via Wi-Fi or Bluetooth.
Edit2:
That gadget won't help. How is a phone supposed to make use of it?
Click to expand...
Click to collapse
If you are talking about tethering, it is OK, I am just satisfied with USB tethering, it is working now, but What I am actually looking for is about RETHETING just converse connection of that tethering. (I know there is no word like RETHETING BUT I don't know what is the right term of just converse connection of tethering.) The problem is, I want to share wired Internet at my working place with my HTC tattoo phone as I have limited GPRS subscription to save some money and to enjoy speed of that wired internet.
I thought running Connectify on my Windows 7 laptop connected to that wired Internet as a Wi-fi hotspot then connected by this android phone (Tattoo) is the right solution.
Yes, it is connected pinging is ok but could not access internet from my Tattoo. May be some firewall problem or something I cannot figure out. If some one have solution it is most welcome.
thacen said:
If you are talking about tethering, it is OK
Click to expand...
Click to collapse
No, I was talking about "retheting"; my MacBook has a wired (ethernet) connection to the internet and is sharing it over Wi-Fi, which my Tattoo can connect to and use.
I did some reading up on Connectify (and was surprised to find that Micro$oft still hasn't quite implemented the feature natively on Windows yet) and it should work. I don't have a Wi-Fi card on my desktop PC so I can't test it myself but perhaps you are having something like a firewall problem.
Ali 24789 said:
No, I was talking about "retheting"; my MacBook has a wired (ethernet) connection to the internet and is sharing it over Wi-Fi, which my Tattoo can connect to and use.
I did some reading up on Connectify (and was surprised to find that Micro$oft still hasn't quite implemented the feature natively on Windows yet) and it should work. I don't have a Wi-Fi card on my desktop PC so I can't test it myself but perhaps you are having something like a firewall problem.
Click to expand...
Click to collapse
I have tried with Connectify and also Virtual Router on my Windows 7 but could not success. I think you are lucky to own a macbook. My Windows 7 is RC so it might be because of that or Tattoo may lack something.
Regarding that android-wifi-tether, it reports as rootted device required and could not help my requirement.
I thought you were talking about an usb internet sharing connections...
If you want to do it via wifi, is pretty easy, since ALL windows have the ad-hoc functionality made by default. Problem is that if you use it with your wifi chipset then you won't be able to conect directly to other wifis if it is your main connect unless you buy another wifi card for this purpose...
in windows 7 you can find this functionality under the connection center... in windows xp is a little bit difficult because you have to configure the adapter into the wifi adapter properties in network connections tabs.
MiSSigNNo said:
I thought you were talking about an usb internet sharing connections...
Click to expand...
Click to collapse
Yes. I actually want that USB internet sharing. But till date no one is seem to success it.. So, while waiting for this solution.. I am just looking for alternative, that sharing through wifi.
If you want to do it via wifi, is pretty easy, since ALL windows have the ad-hoc functionality made by default. Problem is that if you use it with your wifi chipset then you won't be able to conect directly to other wifis if it is your main connect unless you buy another wifi card for this purpose...
in windows 7 you can find this functionality under the connection center... in windows xp is a little bit difficult because you have to configure the adapter into the wifi adapter properties in network connections tabs.
Click to expand...
Click to collapse
I also thought that it should be very easy, and tried all possible means that I know but could not success. One funny thing is, I can get IP address resolved of any URL on my tattoo after wifi connection. It means it can reach DNS server and can resolve IP address but still could not able to browsing. May be some firewall or Antivirus is blocking the browsing on my Windows 7 pc I need to check thoroughly.
If someone have good explanation, it will be very helpful... thanks.
Wifi is working
I was making my laptop complicated by setting 3 static IP networks..as my work place has 3 gateways and I manually change gw when required. I clean it up and set to only one. Now Internet through Wifi of Laptop is OK I am using Connectify on Windows7.
Thx for the patience.
But still waiting for solution on USB "Retheting"