Database Users

XDA2 MOTHERBOARDS

I had purchased a damaged xda2 that had a good lcd to replace my damaged xda2 lcd.When i looked at both motherboards they were slightly different in their chip layouts.The main point was that the lcd connectors were different.One had the connector mounted horizontally and you pushed the lcd cable in horizontally and secured it with a thin black strip.
The other which was the spare i bought has the connector mounted vertically and the lcd cable is pushed in from the top.
Is there different motherboard configurations for the xda2 or have i been sent something else.Any help on this would be appreciated.
regards
Nick

hmm
i have had both of these types of board and can confirm they are both correct, the plug in type is newer as i found the same type on an xda2i.
fatblokes

Thanks for that , is there anyway of identifying which lcd connector is used without opening the xda2 itself?

that i don't i purchased a faulty xda2 from ebay expecting to swop the screen to mine but to find this diffrence, i have seen someone selling screens on ebay before and in the listing it mentioned about the imei, but how tell which is which is beyond me.
fatblokes

Looking for spare parts...

Hi,
I am looking for a new cable for my Universal, the cable between the screen part and the main unit. Mine is broken ...
Or has someone a bricked or in other way damaged universal for sale ?
Cheers,
Remco

HTC Hermes/TyTN front panel ribbon cable same as TyTN II? (Please read/help!)

Hi all, my Hermes/JasJam LCD screen and front panel stopped working a while back with the whiting out issue, funny artifacts and non working buttons. I have pulled it apart quite a few times to make temporary solutions but none have lasted enough.
So now I'm looking to buy a used Hermes and jack the screen part off it and place it on mine. Now I know how to do this but what came to my mind was:
Buy the newer version of the Hermes and place it's front part on my old jasjam which would be like a mixed/modded Hermes.
So I saw the O2 Zinc and the TyTN II and i really like the front panels better than the original hermes ones. So, before I buy one of them, does someone know if the ribbon cable is the same as the original one that connects to the phone's mainboard?
Any help much appreciated!

broken prophet while disassembling

while my prophet was bieng disassembled the two cables connecting the motherboard were torn .not completely but a piece of them ....now all i can c on the display is white screen with greyish centre along with lines
so can anyone suggest me a way to fix it.............
please reply ASAP my prophet is really dear to me........

hi people
i finally somehow fix my prophet ....n there is a new problem
with a failed flash with 3 coloured screen my prophet shuts itself down n when i try to turn it on again it just not turns on again ...........i tried to charge the battery but nothin happened .......just suggest me a way so that i can recover my prophet ..........
please reply ASAP

parkerneo said:
while my prophet was bieng disassembled the two cables connecting the motherboard were torn .not completely but a piece of them ....now all i can c on the display is white screen with greyish centre along with lines
so can anyone suggest me a way to fix it.............
please reply ASAP my prophet is really dear to me........
Click to expand...
Click to collapse
I have same problem. How did you fix it?

two cable connecting to the board? where? can be specific?
just only 1 cable connect with board (speaker cable)
and 2 flex ribbon connect with board (LCD ribbon and keypad ribbon)

[Q] Replacing Digitizer help

Hi friend, I need an help!
I would replace my HD Digitizer because it doesnt work....but I have a question me first do damage.
how is connect the digitizer's flat cable to the LCD?
From the photos I attach I can see a little connector , but I understand how I can detach the old flat cable and how i can insert the new..i must use a welder?
I hope someone can help me
Thanks