o2 mini no didplay and no light in keypad and display but work ok when charge connet no light also come have change display but same please help me out
u sure u wrote that in english?
what u think that is
m sure u cud do better than that!
any one can help me out
changed your display on you magician?
well looks like you damaged the first screen, then bought a incompatible screen and tried to fit that on.
You can try find the replacement screen, theres 2 versions, a black cable one and the non black one, check the wikki.
I had the same experience, i fixed it by sending it back to o2 themselves.
Whitemoo.
Related
I've just bougt myself a MDA Vario from someone who tried to upgrade it and screwed up his phone. After reading some treads on xda-developers I've fixed the phone . Now I've got a cheap Wizard but with a little problem.
When I've got the phone closed the colours on the display are normal. But when I slide out the keyboard and the sceen flips horizontal, than I get less colours. It's similar with a normal PC that that's changed to 265 colours mode.
The phone is flashed with the latest carrier rom.
Who can help me with this problem ?
Thank
I just find out that this problem has to do with a broken flatcable. I searched on Ebay for a replaceable flatcable but I can't find one. Does anybode knows where I can order a new one ?
Michiel
Hey,
Which one is my part number ? the one starting with 50H ? If yes why does it not start with 60?
I can't find any replacement on the internet or ebay.
Where can I get a new screen?
another question, All the cables and modules stuck to the screen, do I need to remove them and put them on my new screen or do they come with the replacement ?
thanks
please look at the pics and tell me which one is my part number
thanks
Okay I removed the Orange film and found it!
But darrrnn I twisted the orange display cable, it has a little twist in it now, did i damage it ?
Although i do not recognize the partnumber, it looks exactly like the Hermes 2 gen screen.
http://cgi.benl.ebay.be/HTC-Cingula...10364QQcmdZViewItemQQ_trksidZp1713.m153.l1262
This is the one i bought and it works perfectly.
exxi said:
Okay I removed the Orange film and found it!
But darrrnn I twisted the orange display cable, it has a little twist in it now, did i damage it ?
Click to expand...
Click to collapse
Probably not, those things are pretty strong.
Good, one more thing
My device has a 60H00037-01M Screen
on ebay I can buy 60H00037-00M
Will it still work ?
Yes it will, i had the same number.
Hi, a few month ago I accidently smashed the screen of my Vario. I decided to buy a new screen so I found one on ebay and installed it in my phone, however when I switched it on all I got was a white screen, no logos, nothing. The touch screen still works as I can hear the sounds when pressing it.
I am now being forced to go to a shop to fix it but I dont really want to shed out money for other people to do. Anyone know what could be causing the problem and how I could fix it?
Thanks.
hi
dont do with ur self u must send ur set to any expert person for evoid any more problems in ur PDA
Recheck the Flexi cable with which screen is attached,may be its detached or not fixed properly or even can be faulty.
Hi to everyone.
I dropped my wizard and lcd broke so I bought a new one and put it on. The problem is that although it takes phone calls and it syncs to pc, the screen is always white with nothing written..only a white screen. I do not know whether another problem occured besides the broken lcd. I tried to disassemble and reassemble it again but with no success. Any help please?
Hi, If my understanding is correct there are 2 versions of LCD for the Wizard. Are you sure that you have the right one? I'm sorry that I am unable to offer any further advice except to say that if the phone 'phones' and 'syncs' the basics must be working. Also the white screen means that the backlight is working - the problem is the LCD drive. Perhaps worth checking with your replacement supplier that they sent you the correct part?
Good luck!
Hi, guys, it's been awhile since i last posted. i hope i u can help me with this....
at first my LCD Screen turns white sometimes when i slide it into landscape and portrait, but that was not so often... after 3 days without that weird problem when i pickup my wizard form my working table yesterday it's all white though i can still here the buttons responding bcoz it ticks. i can even coll my cellphone...
is there someone could tell me what went wrong with my wizard?
thanks in advance guys ang god bless...
flex cable (cable between lcd and phone) is broken.. You can buy new, it's about 10$ on ebay.
or your connector is just loose
thanks for the quick reply, i have download the HTC Wizard 200 service manual and i will try to see if i have a loose flex cable. and i hope josefcrist is right, co'z it will take sometime for me to buy a new one if it's defective...
thanks,
brb...