Hi I'm thinking of encoding video to playback on the Tytn, can someone please recommend a software that will keep the movie size small while maintaining quality.
Thanks
i've always found best results with avi format. TCPMP is available for free for the tytn but does have a playback issue which is very simply worked around.
As for software for converting your videos, I use CarryDVD (not free) for converting my dvd's - I found converting a DVD movie to a 250-300MB avi gives excellent results. For converting non-dvd video files, eg. larger avi files, I use the free version of Lathe - PocketDivX Encoder with Xvid and 2 pass encoding checked.
Hope this helps.
Matt
Ive used AutoGK, it encodes from several sources (including VOB files from DVDs) into Xvid or DivX.
I personally encode into .avi using Xvid (it does a 2pass Mpeg-4 Xvid encoding to .avi) and audio is encoded in MP3 at 128kbit VBR. And i set it to encode into 320x240.
Using Coreplayer (or TCPMP) it plays back FLAWLESSLY.
For example ive encoded an episode of the simpsons (22mins) from DVD into a 60Mb avi file and its just perfect playback on the TyTN. The performance TCPMP/Coreplayer seems to depend somewhat on the ROM you are using.
An excellent guide for using AutoGK alongside DVD Decrypter (both freeware) is found HERE on doom9.org. Using my analogy the filesize you set in AutoGK can be found using 5.45*minutes.
Use half that if you are encoding a low detail picture such as a cartoon (as i did with the simpsons). So for example a 30 minute video of a properly filmed source (ie friends, or cheers etc..) would use a filesize of 163.5Mb.
Guest69 said:
i've always found best results with avi format. TCPMP is available for free for the tytn but does have a playback issue which is very simply worked around.
As for software for converting your videos, I use CarryDVD (not free) for converting my dvd's - I found converting a DVD movie to a 250-300MB avi gives excellent results. For converting non-dvd video files, eg. larger avi files, I use the free version of Lathe - PocketDivX Encoder with Xvid and 2 pass encoding checked.
Hope this helps.
Matt
Click to expand...
Click to collapse
Thanks Guest69, i've downloaded the trial version of CarryDVD, if I like it i'll buy the software.
Not free, but I am using CloneDVDmobile from slysoft. $39, iirc, though I got the suite (ripping and decoding as well) a while back when it was on sale. Yes, there are free versions that do much of the same, but quite honestly I got tired of going multiple places to get updates. Seems to work well for encoding.
Just figured out that you have to choose the Raw Framebuffer option and NOT the ATI Imageon (in the TCPMP Video Options) in order to get normal playback on the hermes. I've got a recode of Madagascar that looks great at 300MB for the 80(?) minute movie at 320x(whatever the 16:9AR works out to). There are some tearing-like transition artifiacts, and minor artifacting if I keep my eyes within about 10" of the screen (which is as close as my old-fart eyes can focus).
I get good results with virtualdubmod. Have a look here: http://zodiacguide.sitesled.com/
I started off using the guide, but like to have as much control as possible so now I don't. Obviously depends on the codecs you install, but I like it.
Possibly not the simplest one-stop method.
Which Video encoder
Hi
I use a product called DVD Catalyst there are two versions and you can download a Full 7-day uncrippled trial version here
http://www.pocketdvd.ca/
The program is a all in one ripper DVD to PDA/IPOD/PSP etc
Colin
Try Super. Completely FREE and converts between nearly every file format imaginable. You do need to play with the settings to get good results though. Try 300-400KBps to start with and increase / decrease based on performance, and remember to use single channel and fairly low quality sound to keep the file as small as possible (unless you have decent earphones (and an adapter ))
Super is good but doesn't not give you a 2-pass encode option. Try something like PocketDivxEncoder which has the 2-pass option for encoding to Xvid. It's also very easy to set up and fast.
I actually use WinMEnc. not as polished or professional as PocketDivXEncoder but will convert from DVD or .avi file and is excellent quality plus the second pass is twice as fast as PocketDivxEncoder. (Both are based around Mencoder). For years I did it manually using VDub Mod and even Auto GK.
Another vote for Super. Excellent program for converting any format into any format.
And completely free.
overzeetop said:
Not free, but I am using CloneDVDmobile from slysoft. $39, ....... I've got a recode of Madagascar that looks great at 300MB for the 80(?) minute movie at 320x240.
Click to expand...
Click to collapse
I've got CloneDVDmobile as well. I've used the full CLoneDVD for years with great success. The default for DVD encoding on CloneDVDmobile is set at a quality level of 23 or about 556 meg for a 2 hour movie. What quality level are you finding works best for the Hermes and DVD encoding to get as small an AVI file as possible without making the video un-watchable?
I try to keep my avi files to around 300mb per movie. This seems to keep a sharp picture even with action scenes.
Related
Hi, i got myself a quick 2gig memory card today and want to put some of my movies on it, i have 2 questions
What is a decent converter that i can use?
What settings would run on Universal smooth?
Thanks all
Normally works without converted it, in ac format 1,5Gb of movie it will be played smoothly, if not try google to find some converter bc right now i can´t remember any.
hope this help
regards
thanks a million, some tweaking to the player and im fixed
thanks again mate
what you said works, but i have no quality and it keeps sticking my video, any ideas why?
I went through the various options for this a few months ago. In TCPMP, set the following for best performance:
In Video:
Smooth video (only 50%)
Quality: Normal
Video driver: Intel XScale
In Settings - DirectDraw
Overlay with colorkey
In Settings - Intel XScale
Everything selected
Leave all other video settings off or at the default settings.
Unfortunately, the universal can't manage any video (XviD, MP4 or WMV) I've tried at the native resolution of 640x480 without some serious frame skipping. But it seems to cope well with videos I've encoded for my Archos, which are XviD or DivX, 320x240, and are encoded at 1000 kbps or less. You can use B-Frames (they don't take much processing power and give a significant performance increase), but don't use GMC or Q-Pel.
As for converters/encoders, take your pick. There are loads. Dr DivX is pretty simple to use, but IIRC isn't available any more. Your best bet is to follow one of the guides at doom9.org.
thanks, its ashame my mp cant read it because i prefer the interface on windows media player then core media player aswel as my playlists, thanks again, hope some update for the codecs or something comes out soon
Why not try Windows Media Encoder if you are just converting from one format to another (don't know if you can rip DVD, never tried). The built in profiles are good enough for the Uni's screen. To rip from DVD I use IMTOO dvd ripper. Just create a profile as listed above and away you go.....Good luck,Pug
TCPMP+PocketDivxEncoder (http://divx.ppccool.com) ... for the best results!
yarser said:
TCPMP+PocketDivxEncoder (http://divx.ppccool.com) ... for the best results!
Click to expand...
Click to collapse
Is it better than DrDivx? I have had some good success with DrDivx. The problem is that it wastes some space for the widescreen formats and I would prefer to use every single pixel available. Is there a setting in DrDivx that reformats the movie to fit exactly in the Tornado screen?
I use
Fox Video Converter. Virtually any format with any setting and you can adjust any of the settings to suit yourself. Generally a 700Mb Divx converts into a roughtly 250-300Mb WMV or ASF or whatever you want. Then TCPMP.
I am stating to convert some of the movies and to be played on my hermes on the go, but eventually I found out that the movies converted thru pocketdivxencoder eventually dropping out frames.
I want to know the best setting for converting video for Hermes...
Is it better to convert to WMV at a particular bitrate than converting to DiVX?
THanks a lot.
If you're gonna use the ATI Imageeon Decoder, video bitrates can go up to 1.2MBps, but you will sure get a lot of artifacts. if you intend to use Raw Frame Buffer, video bitrate can go up to 700KBps (audio 128KBps), but also remember that Pocket PCs can play higher bitrates without dropping frames when the video is wider, e.g. playing a 16:9 movie clip is somehow easier than playing a clip with 4:3 aspect ratio.
BTW If you want to stream the audio to your BT Headset while watching a clip, a video bitrate of 410KBps (audio 128KBps) is good, but you will have to use the ATI Decoder.
Cheers!
Rockman27 said:
I am stating to convert some of the movies and to be played on my hermes on the go, but eventually I found out that the movies converted thru pocketdivxencoder eventually dropping out frames.
I want to know the best setting for converting video for Hermes...
Is it better to convert to WMV at a particular bitrate than converting to DiVX?
THanks a lot.
Click to expand...
Click to collapse
You need to use TCPMP player and download the ATI imageon fix cab (search for it), a few adjustments and your pocketdivx converted films will play perfectly.
i use sompy media encoder, its free and has a stting for pda screen size and sound that is realy good, just load the file and away you go.
Take a look HERE ive used plenty of videos encoded this way and works a treat.
In coreplayer (aka TCPMP) i use Directdraw as ATimageON produces artifacts until they allow a non-rgb filter to be used.
mrvanx said:
Take a look HERE ive used plenty of videos encoded this way and works a treat.
In coreplayer (aka TCPMP) i use Directdraw as ATimageON produces artifacts until they allow a non-rgb filter to be used.
Click to expand...
Click to collapse
Thanks for your guideline and I have got some satisfactory conversions.. but when I switch to DirectDraw in TCPMP, it gives me black screen no matter which type of video files I am playing.
When I switch back to ATI Imageon, sometimes it will work but sometimes I will get weird screens (the whole screen got messed up and "jumping around"). The only perfectly working selection for me is RAW or GDI.
Am I doing something wrong in the setting with the directdraw and atiimageon? Thanks again.
With bitrate size there is a law of diminishing returns. After a certain bitrate you will not notice the difference on the Hermes screen.
After years of encoding/transcoding. I have settled on these paramters as the other variable is trying to fit as much onto my MicroSD as possible.
Video DivX @ 350 kbps, high quality, 2 pass.
Audio AAC 64 kbps 44 KHz (SSR profile)
Using MP4 as the container.
The quality is pin sharp. Using higher bitrates for me yield no benefit when viewed on the phone. The filesize comes out at approx 170 meg for 1 hour.
When I get back I will upload some samples of stuff I've done and I don't mind watching on the phone, typically 4:3 like The Wire and of course the Simpsons.
Wam7 said:
With bitrate size there is a law of diminishing returns. After a certain bitrate you will not notice the difference on the Hermes screen.
After years of encoding/transcoding. I have settled on these paramters as the other variable is trying to fit as much onto my MicroSD as possible.
Video DivX @ 350 kbps, high quality, 2 pass.
Audio AAC 64 kbps 44 KHz (SSR profile)
Using MP4 as the container.
The quality is pin sharp. Using higher bitrates for me yield no benefit when viewed on the phone. The filesize comes out at approx 170 meg for 1 hour.
When I get back I will upload some samples of stuff I've done and I don't mind watching on the phone, typically 4:3 like The Wire and of course the Simpsons.
Click to expand...
Click to collapse
What program do you use to do this encoding? I would like to try out your settings on a few movies i have been waiting to encode myself.
Globalrebel said:
What program do you use to do this encoding? I would like to try out your settings on a few movies i have been waiting to encode myself.
Click to expand...
Click to collapse
For a long while I was doing it manually with Virtual Dub Mod and demuxing audio etc but this can be arduous when doing a lot of stuff.
Nowadays I tend to use WinMenc .61 with the Mencoder binaries. It's not the best GUI in the world, in fact it's pretty plain and could do with updating but it gives the control I need, batch encoding, and is very fast.
I wiill link them all here when I eventually get home.
You could try PocketDivX encoder (and Lathe) which use Mencoder as well but were half the speed for me when it comes to the 2nd pass when I tested them. IIRC they don't give as much control either.
Alas no time to give links to binaries just yet but Google might help if you're in a rush. Here is a quick sample of Prison Break with the above settings.
http://www.wam77.pwp.blueyonder.co.uk/Prison.Break.S02E18.Clip.350kbps.mp4
Found a bit of time
Download Winmenc http://yawoogle.googlepages.com/winmenc.0.61.zip
Download MPlayer http://oss.netfarm.it/mplayer/builds/mplayer-rtm-svn-23169.7z
Download Mencoder http://oss.netfarm.it/mplayer/builds/mencoder-rtm-svn-23169.7z
Download PthreadGC2 ftp://sourceware.org/pub/pthreads-win32/dll-latest/lib/pthreadGC2.dll
Place all in the same folder. Run Winmenc.
If you want to try my options download this http://www.wam77.pwp.blueyonder.co.uk/Mp4_PocketPC_DivX350_AAC_320.240.ini
and then click on load profile and point it to the file. (There are others in the default profile dir that you can play with)
This will also do Xvid, DivX, X264, mpeg2 (in .avi container) with 2 pass options. If you want ultra sharpness you can try higher bitrates but I can not tell for most things. If you also want to keep the file size fairly small I have found 350 kbps to be a good trade off. Run a few tests at different bitrates and decide for yourself.
Awesome guide Wam.
Using your setttings I have been playing with the x264 codec. It's alot more demanding on the cpu. however it does produce very noticeable far superior results over divx. It also takes a good 2x more time to encode, but nvm that the end result which counts.
Getting x264 playing on hermes appears to be a slight headache for some.
TCPMP used to support it, now doesnt.
So you have 2 options CorePlayer or old beta version of TCPMP 72RC1.exe
IIRC I remeber reading the coreplayer is newer more effeciant by approx 10% than the tpcmp x264 beta decoder. I also had a bit of a headache getting the aac audio codec working.. maybe cos I have a wm2003 device. I clicked on and installed far to many differnt things to know how I fixed it .
Also apprently the ATI ImageOn boosts performance nicely for 264 files. but causes problems with divx xvid etc.. which are commonly used.
1) get new rom ak3.. 2)install atifix + If you set zoom to 100% - artifacts dissapear.
Nice thread here. - http://70.84.52.18/corecodec.com/forum/index.php?topic=3723.msg22042#msg22042 - srry if cross forum linking isnt allowed..
I have only a dell axim x5 - maybe 5 years old now, but it has a 400mhz intel xscale cpu which I guess is comparible to what the hermes samsung cpu can do. So my testing regarding performance maybe a bit off. I can confirm though x264 codec is the way forward. All the new devices use it for good reason.. ipods. playstaion portables, blueray. hd tv's.
A little more clarifcation needs to be done. to provide us all with the ultimate setup. one thing for sure. wams settings are great. and produce fantastic results. the software he reccomends - winmec is real nice and easy to use..
I also spent a fair bit of time with MEgui front end and, it has so many more options.. which could be a bonus but was just too confusing for me. Also winmec and Megui may have shifted the timing of frames off a tiny bit.. I'll need to check on a longer file to see if there was any syncing issues.
I'll be back soon with a definative guide.
Oh yeah x264 is definitely the way to go and the improvement are easily noticed for the same bitrate.
I did a few x264 but this was back before WM6 (AKU 3.3) and the ATI fixes and I could play smooth BUT without audio which wasn't much use.
I might give them a try again when I have more time to play but for the time being DivX is giving me good results... and is quick!
Oh I am using TCPMP 0.81. I would use Coreplayer 1.04 but until they fix the negative audio sync bug I am forced to use TCPMP.
What encoder should I use to encode videos for the diamond so that it uses the built in mp4 codec?
I tried SUPER software to encode but the videos don't show up in the album and won't play in WMP. I have TCPMP but when a camera perspective changes it becomes choppy. Does Core Player 1.2.5 have the same effect with VGA videos?
anyone? pleas at least tell me your experience with core player?
you are missing the second codec you suggested. typo maybe? thanks anyway your two cents helps a lot.
bugmenot said:
What encoder should I use to encode videos for the diamond so that it uses the built in mp4 codec?
I tried SUPER software to encode but the videos don't show up in the album and won't play in WMP. I have TCPMP but when a camera perspective changes it becomes choppy. Does Core Player 1.2.5 have the same effect with VGA videos?
Click to expand...
Click to collapse
I know this is an old thread but...
I use videora i-phone 3g converter.
Set it to use the H.264 480x320 768kbps stereo/128kpbs Advanced profile.
It spits out excellent quality with no frame drop and its full screen.
Its recognised in wmp and touchflow video tab.
best of all its free
my favourite is slysoft clonedvdmobile + coreplayer. i encode in ipod v5 high res 640x480 (about 640x360 for qidescreen) with quality about 18. 1012kbps, 2 pass. makes about 700mb for 1hr 15mins
Good morning!
I'm using tcmp (the core pocket media player) on my diamond and for the conversion I use PocketDivxEncoder. It's fast easy to use and very flexible with the settings such as dimensions sound and video quality ...
Links:
TCPMP with built in flv support
PocketDivxEncoder
I tried many conversion programs and codecs and I've come to the conclusion that smooth vga(640x480)-video-playback isn't possible on the diamond. Reducing the resolution to 480x360 however brings suitable results with virtually no dropped frames when playing in TCPMP or Coreplayer. The resulting filesize is also very convenient (about 300mb per hour, 200mb for animes).
The best conversion program I tried so far is SUPER, which additionally is Freeware
here is a download link: http://www.erightsoft.com/SUPER.html#Dnload
I created two profiles for SUPER (one for 4:3 videos and one for 16:9) which can be easily loaded via right click anywhere in the main window "Import ..."
ps: I also liked the videora i-phone 3g converter suggested by GutsyTripod, but the playback performence of the mpg4 video seems to bee slightly slower (about 10-15%) than the xvid video produced with SUPER
The Blackstone is the first smart/windows mobile phone i have had so after recieving my phone i tried some of my video files but (as i expected) windows media wudn't play them, i have seen on other threads that alot of people mention Core Player 1.2.5 and wondered if anyone could give answer me a few quick questions:
1. Does Core Player play most formats (im trying to play x264.mp4 and dixv .avi)
2. Where can i find Core Player?
3. is it a free program? if not how much is it in GBP?
Go to www.coreplayer.com and see for yourself. I think on their homepage they anwser pretty much all your questions.
Ascenca
Thanks - Don't know why didn't find their site!
I had this problem - Core Player 1.2.5 plays all files perfectly on the HD - commuting will never be the same again...
Which version do i need?
CorePlayer Mobile For PocketPC / Windows Mobile
CorePlayer Mobile for SmartPhone
I assume its the SmartPhone version?
This is the version you need: https://www.mobihand.com/cart1.asp?posid=130&pid=8905
(mobile/WM)
HD is a PocketPC
working
Coreplayer 2,5 works perfectly.The PocketPc version the smartphone one is for devices without touchscreen.
Its a commercial software.
Ideal is to use the Qtv display as video output.
I tried different encoded format and the best result is encode the avi files with following attributes:
dimension 640*480
Bitrate between 700 and 750
Framerate 25fps
Audio MP3
Stereo 128kps
Frecuency 44100 Hz.
You can use a higher bitrate till 1200 , but the video doen't play always very smootly then
I tried a couple widescreen (960x540) files in different formats (wmv, mov, avi) with coreplayer 2.5, and none of them would play anywhere near smoothly. the mov played with about 1.5 fps, the wmv with about 5 fps und the avi with something like 7 fps. do any of the numerous settings in coreplayer need to be changed or is the device simply not powerful enough for full native resolution video playback?
just tried some more videos, this time a 1 MBit/s 480x270 wmv file, and even that couldn't be played in any useful way:
played frames: 85
dropped: 447
did you change anything in the core player settings to achieve proper playback?
obstler said:
I tried a couple widescreen (960x540) files in different formats (wmv, mov, avi) with coreplayer 2.5, and none of them would play anywhere near smoothly. the mov played with about 1.5 fps, the wmv with about 5 fps und the avi with something like 7 fps. do any of the numerous settings in coreplayer need to be changed or is the device simply not powerful enough for full native resolution video playback?
Click to expand...
Click to collapse
Firstly, the issue with the video files comes from the fact that they're larger than the resolution of the screen. (your video=960x540, HD=800x460) This means that as well as decoding and playing the video, it also has to scale the video down to it's resolution. This is why it's stuttering. Full native resolution video playback is 800x640 which, incidentally, is the native resolution of DVDs, so if DVD rips have been encoded properly, should not need resizing or re-encoding to play on the HD. (feel free to be skeptical of this, I don't own a HD yet so can't confirm this)
The 1Mbps file possibly wasn't playing properly for that exact reason, it was 1Mbps. As BerreZ states, the highest bitrate to get good playback is 750Kbp
Thanks, got CorePlayer up and running now works like a dream!
I'm waiting for funds to clear so i can finally order one of these bad boys. I'm not too demanding when it comes to video playback on the phone. 700KBPS is the standard encoding of dvd rips isn't it? like, your traditional torrent movie file.So it looks like we can play them on the HD then using coreplayer? I'm not to concerned about HD quality playback and i've been using an XDA2i for 5 years, mainly for clips and such when bored at the bus station .
Maybe with a higher capacity card I might throw a movie or two on there
....IB a n e
BANE said:
I'm waiting for funds to clear so i can finally order one of these bad boys. I'm not too demanding when it comes to video playback on the phone. 700KBPS is the standard encoding of dvd rips isn't it? like, your traditional torrent movie file.So it looks like we can play them on the HD then using coreplayer? I'm not to concerned about HD quality playback and i've been using an XDA2i for 5 years, mainly for clips and such when bored at the bus station .
Maybe with a higher capacity card I might throw a movie or two on there
....IB a n e
Click to expand...
Click to collapse
a)Native DVD resolution is not 800x640
b)700Kbps is not the "Standard Encoding" for DVD rips.
bitrate will depend on the size of the encode, the length of the movie.
Apologies, my mistake.
...Ib a n e
Urgh -it's payware. Another cost.
Is there a decent free avi/media player?
One time, I got a cab, but lost it, with some codecs to play divx and other on the Media player. Does anyone knows something like that??
I just purchased CorePlayer. It gave me v1.3.6 not 2.5. Anyway I have tried a divx and avi film. With both I just saw a green haze for a bit and I needed to soft reset the device to recover.
I downloaded the cab not exe and installed it directly onto the device. My films are on storage.
I get a "Copy & Convert" dialogue box with "Convertion (None)" and it seems to do nothing for a while but it does seem to copy the file across ok. What that means is I can see it in explorer. That said it seems to take several runs at it and the bars never go beyond three or so.
Have I just got the wrong resolution?
Any ideas?
I'm planning to transcode some video to watch on my universal via SD card, the presets on WinFF (Win32 wrapper to FFMpeg) are numerous but going to try 3GP @ 320x240x15fps, anyone else achieved this and if so what rates/sizes/formats did you use?
?
Transcoding ?? Why would you need it ? Unless the videos are HD, the Universal has the power to play them fine (most of them very fine ). If the space is your problem, I suggest a bigger SD-card.
I think it's a waste of time those ~30 minutes needed for conversion of a movie that lasts @ 90 min; and I'm pretty sure that you'll delete the movie after you'll watch it.
PS: for best results use TCPMP (freeware) or Core Player (not freeware). The Media Player is much slower and it supports few codecs.
Transcoding
I agree
There is no need for this as the UNI has all the power needed to play films with ease. If space is an issue google for DVD Catalyst. It's freeware and can reduce the size of DVD's down to about 275Mb.
Then just play them through the TCPMP as suggested by GNotten as this is far superior
I USE MKV videos with coreplayers .... they save so much space compared to other video formats and the video quality is far better than other format... one movie is around 250~300 mb...
Size and wether or not it could handle it were my main issues. Dont have a problem kicking off a transcode ffmpeg job and wandering off elsewhere while it's busy but i'll give a raw video a go and see how i get on
cycloid said:
Size and wether or not it could handle it were my main issues. Dont have a problem kicking off a transcode ffmpeg job and wandering off elsewhere while it's busy but i'll give a raw video a go and see how i get on
Click to expand...
Click to collapse
well there are really great video players like TCPMP and CorePlayer with which i have to never convert any video... just dran ang drop it from computer to SD and it runs flawlwssly... except rmv... which WMP can play after tweaking but can not fast forwar... except that no problems at all not size nor video format...
Cheers
Rajiv