Database Users

How to change T-mobil skin to O2 skin?

How to change T-mobil skin to O2 skin?pls some help pls.i have a O2 xda-mini witn T-mobil skin

I am interested too, anyone?

Load an O2 ROM?

how? and where do we find it? :roll:

c1181427 said:
how? and where do we find it? :roll:
Click to expand...
Click to collapse
ROMs available from the FTP site attached to this forum. You need to do a bit of digging and use the search function.

thank you very much! i will look for it

I wouldn't recommend to flash the entire ROM just to get a different skin. If the flashing goes wrong, T-mobile will not provide any help (guarantee wise). It's not worth the risk.
I'm not the big expert here, but there must be a way to change it without flashing a new rom...

Most parts of the skins (nearly all?) are bitmaps in the windows directory. Store new ones and your Magician gets a new look. A problem could be that in the windows directory RAM and ROM are merged. A ROM file can not be erased but you can store a file under the same name in RAM. The original file in ROM will not be visible and used anymore as long as the file in RAM exists.
In my Magician the brandings are installed in RAM (from the extendedROM), so I can replace them. If I just delete them I get the original skins from MS stored in ROM.
If you have the IntelliDialer you have to notice that it is installed in RAM (from the extendedROM) so only deleting its files does not work (there are no others).
I do not know how O2 integrates its skins but I think they will use the same way as t-mobile so taking O2s (bitmap) files and copy them to your device should work. (Make a backup before to be save)
Hope that hepls a little bit
Joe

If you haven't already fixed your problem, here is the O2 splashcreen CAB.
Just copy it to your my documents and run it from there.
That removes the T-Mobile startup screen.
Then you can just do a search on these forums for some skins for the intellidialler and intellipad. I have a nice Apple based one that I found in a post on these forums.

Quickmark showing boxes instead of words

Am using the Dopot CT9000 with the English ROM and there is this program called Quickmark which I think is a name card scanning software. The thing is, all the instructions in the program are in boxes and not in English. Is there any way around this?
Does TyTN have this program?

Tell me pls the following:
1. Which language -exactly- have you installed on your device?
2. What filenames have the two files Quickmark.xxxx.dll (whereas xxxx stands for the landcode as defined by Microsoft).
Check this and post it here. Then there will be a solution for you.
The QR Codes are really cool!

ghl10000 said:
Tell me pls the following:
1. Which language -exactly- have you installed on your device?
2. What filenames have the two files Quickmark.xxxx.dll (whereas xxxx stands for the landcode as defined by Microsoft).
Check this and post it here. Then there will be a solution for you.
The QR Codes are really cool!
Click to expand...
Click to collapse
Thank you so much for your help.
1. I presume the language is english as everything else in my CT9000 is in English and all. The keyboard has some chinese strokes but that's the only thing chinese about it. My software version are as follows:
ROM: 1.23.707.1
ROM date: 06/28/06
Radio: 1.06.00.10
Protocol: 32.37.7010.01H
Is there any other information you need to know?
2. The 2 files you were talking about are as follows:
Quickmark.0409.dll
Quickmark.0804.dll
Would appreciate any help I can get on this.
Thank you.

vapor said:
2. The 2 files you were talking about are as follows:
Quickmark.0409.dll
Quickmark.0804.dll
Click to expand...
Click to collapse
Delete QuickMark.0809.dll and rename QuickMark.0409.dll to QuickMark.0809.dll, that's it.

pof said:
vapor said:
2. The 2 files you were talking about are as follows:
Quickmark.0409.dll
Quickmark.0804.dll
Click to expand...
Click to collapse
Delete QuickMark.0809.dll and rename QuickMark.0409.dll to QuickMark.0809.dll, that's it.
Click to expand...
Click to collapse
did you mean delete the quickmark.0804.dll file and rename the quickmark.0409.dll to quickmark.0809.dll?
if you did, i have done it and there is no change. even a soft reset does not seem to work.

vapor said:
pof said:
Delete QuickMark.0809.dll and rename QuickMark.0409.dll to QuickMark.0809.dll, that's it.
Click to expand...
Click to collapse
did you mean delete the quickmark.0804.dll file and rename the quickmark.0409.dll to quickmark.0809.dll?
Click to expand...
Click to collapse
QuickMark.0409.dll contains the english text.
QuickMark.0809.dll contains the chinese text.
So, delete QuickMark.0809.dll and either rename or copy QuickMark.0409.dll to QuickMark.0809.dll, so the program will always find the dll with the english text.

pof said:
vapor said:
pof said:
Delete QuickMark.0809.dll and rename QuickMark.0409.dll to QuickMark.0809.dll, that's it.
Click to expand...
Click to collapse
did you mean delete the quickmark.0804.dll file and rename the quickmark.0409.dll to quickmark.0809.dll?
Click to expand...
Click to collapse
QuickMark.0409.dll contains the english text.
QuickMark.0809.dll contains the chinese text.
So, delete QuickMark.0809.dll and either rename or copy QuickMark.0409.dll to QuickMark.0809.dll, so the program will always find the dll with the english text.
Click to expand...
Click to collapse
but i do not have an 0809, only a 0804.

vapor said:
pof said:
QuickMark.0409.dll contains the english text.
QuickMark.0809.dll contains the chinese text.
Click to expand...
Click to collapse
but i do not have an 0809, only a 0804.
Click to expand...
Click to collapse
OK, delete QuickMark.0804.dll and copy or rename QuickMark.0409.dll to QuickMark.0804.dll.
The point is that the program finds the english dll...

pof said:
vapor said:
pof said:
QuickMark.0409.dll contains the english text.
QuickMark.0809.dll contains the chinese text.
Click to expand...
Click to collapse
but i do not have an 0809, only a 0804.
Click to expand...
Click to collapse
OK, delete QuickMark.0804.dll and copy or rename QuickMark.0409.dll to QuickMark.0804.dll.
The point is that the program finds the english dll...
Click to expand...
Click to collapse
somehow its still not working. it still shows boxes. have done a soft reset. is there any other way?

anyone else can help me out here?

has anyone else faced this problem and can help? maybe upload the right file?

All CAB'd up and ready to go.
P
http://www.modaco.com/index.php?showtopic=244416#

modaco said:
All CAB'd up and ready to go.
P
http://www.modaco.com/index.php?showtopic=244416#
Click to expand...
Click to collapse
thanks for the file modaco.
i tried to install over the current installation and it doesnt work
i removed the original and installed this one and it doesnt work
i tried renaming the file in the new installation and it also doesnt work
by sayin it doenst work means it still shows the boxes.
any idea?

Hello,
well Chinese isn’t Chines as is with German and German (or English and English) in the sense of localization as defined by Microsoft !
Just have a look at this most valuable “List of Locale IDs” published by Microsoft:
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
I had the same problem as you when I first started Quickmark and was even puzzled for a moment when I had restarted it again, having changed the locale ID to German.
All menue items kept showing up as little boxes – which is what one usually sees when there is a problem with the localization.
Resolution was that there is a special modified Locale ID for Austria !
(Here in Austria German is the official language, but there is a Local ID for German (Austria), which is 0c07 and for German (Standard = Germany), which is 0407.)
When I changed the English language file to Quickmark.0c07.dll (instead of the previously tried Quickmark.0407.dll) the English menue showed up again !
As you mentioned that on your keyboard you can see some Chinese keys I’d suppose your device isn’t a US-English version.
Also I’d assume from the flag you are using next to your nick that your native tongue isn’t English either, correct ?
What you should do:
Go to Settings | Language (or Localization or whatever it be called on your device) and check, which language you have set there.
Then look up the Locale ID for this language setting in the table (see link above).
Replace the Locale ID in the filename of the English language dll.
Reboot !!!
Now you should see the English menue instead of the boxes.
I don’t know anyone where this procedure hasn’t resolved this problem !

ghl10000 said:
Hello,
well Chinese isn’t Chines as is with German and German (or English and English) in the sense of localization as defined by Microsoft !
Just have a look at this most valuable “List of Locale IDs” published by Microsoft:
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
I had the same problem as you when I first started Quickmark and was even puzzled for a moment when I had restarted it again, having changed the locale ID to German.
All menue items kept showing up as little boxes – which is what one usually sees when there is a problem with the localization.
Resolution was that there is a special modified Locale ID for Austria !
(Here in Austria German is the official language, but there is a Local ID for German (Austria), which is 0c07 and for German (Standard = Germany), which is 0407.)
When I changed the English language file to Quickmark.0c07.dll (instead of the previously tried Quickmark.0407.dll) the English menue showed up again !
As you mentioned that on your keyboard you can see some Chinese keys I’d suppose your device isn’t a US-English version.
Also I’d assume from the flag you are using next to your nick that your native tongue isn’t English either, correct ?
What you should do:
Go to Settings | Language (or Localization or whatever it be called on your device) and check, which language you have set there.
Then look up the Locale ID for this language setting in the table (see link above).
Replace the Locale ID in the filename of the English language dll.
Reboot !!!
Now you should see the English menue instead of the boxes.
I don’t know anyone where this procedure hasn’t resolved this problem !
Click to expand...
Click to collapse
thank you so much for your input. I will go and try it out.
However I do not understand the Settings > Language part. Where can I find it? Under Regional Settings? Or somewhere else? I hope you can guide me on this as I could not find it.

just tried it out and it works great now wooohooo. thank you all for helping me out.

vapor said:
just tried it out and it works great now wooohooo. thank you all for helping me out.
Click to expand...
Click to collapse
Yeaaaah !!!
The QR Codes are a really cool application.
Actually in my opinion the coolest "fun" application I can think of.
(I am no gamer, so those games do not really phascinate me.)
However on a MS Smartphone (I have the Qtek 8300) and Nokia phones (tried it out on my 6680, whose camera is quite good) this application even works better:
You just have to point your phone onto a QR Code (can even be done rather fast and unprecise) and the action is triggered automatically - WITHOUT having to press a button, as on the TyTN !!!!!
This is a BIG advantage, because when pressing a button you move the device a tiny little bit.
And as the camera resolution of these phone devices aren't too high, this might be enough for not being able to decode the QR.
Actually I have no idea why Quickmark has decided to add this "Press a Button" requirement on the TyTN.
(Maybe they just ported the code and the automatic trigger mechanism is different on the Hermes platform.)
Anyway Quickmark should optimize this for the TyTN !!!!!
What do you think ? (Question to the audience.)

vapor said:
just tried it out and it works great now wooohooo. thank you all for helping me out.
Click to expand...
Click to collapse
Yeaaaah !!!
The QR Codes are a really cool application.
Actually in my opinion the coolest "fun" application I can think of.
(I am no gamer, so those games do not really phascinate me.)
However on a MS Smartphone (I have the Qtek 8300) and Nokia phones (tried it out on my 6680, whose camera is quite good) this application even works better:
You just have to point your phone onto a QR Code (can even be done rather fast and unprecise) and the action is triggered automatically - WITHOUT having to press a button, as on the TyTN !!!!!
This is a BIG advantage, because when pressing a button you move the device a tiny little bit.
And as the camera resolution of these phone devices aren't too high, this might be enough for not being able to decode the QR.
Actually I have no idea why Quickmark has decided to add this "Press a Button" requirement on the TyTN.
(Maybe they just ported the code and the automatic trigger mechanism is different on the Hermes platform.)
Anyway Quickmark should optimize this for the TyTN !!!!!
What do you think ? (Question to the audience.)

ghl10000 said:
Yeaaaah !!!
However on a MS Smartphone (I have the Qtek 8300) and Nokia phones (tried it out on my 6680, whose camera is quite good) this application even works better:
Click to expand...
Click to collapse
Which version of QuickMark did you use for Qtek 8300?

O2 Plus V2.3 available?

I tried to register at ce4arab.com to download O2 Plus V2.3.
Is there anybody that can download it for me? Since my Arab is very bad
I think I did manage to register but even with online translation tools I wasn't able to download the file.
Here is the link:
http://www.ce4arab.com/vb7/showthread.php?t=67549
Thanks in advance!

here u go man

sorry,this is the file

Thanks, also found it in the Atom section. Is yours a "universal" version?
Havn't been able to find a patch for this one.
There's only a patch available for O2 Plus 2.0.

Im not sure,I downloaded it from the link that u gave me.
BTW,whats ur device?

I own an HTC Wizard and an HTC Prophet.
When I try to install the program it tells me that I there has to be a program called "connect" on my device. Older versions also had this message, but there was a patch to work around this.
I will see if I'm able to solve this problem

hope u'll be able to solve it.
i want to ask u a question,did u manage to put the o2 media plus software on ur prophet?

I havn't tried O2 Media Plus, but I will have a look for you to see if I can get it and make it work on the HTC Prophet

thanks in advance,i'll look in ce4arab,maybe they cooked something like this

found one!!
this one worked for my prophet(qteq rom),here u go

Great find! Will try this later on

So is there a working version for the Wizard?

It will work on HTC himalaya?

dont know
i really dont know if it will work on the himalaya,like i said i've tryed it on my prophet with the new qteq rom

mr.r9 said:
i really dont know if it will work on the himalaya,like i said i've tryed it on my prophet with the new qteq rom
Click to expand...
Click to collapse
U are right man. I just tested on file attached for qteq rom. It was work prefectly. thanks

The file "\Storage Card\soft\o2plus2.3.cab"is not a valid Windows CE setup file.
___________
O2 Xda IIi
wm2003 se

You should run this on PPC not on your PC. Just click that file on PPC and install on main memory.

Please tell me if this will work on the Wizard.

melvynadam said:
Please tell me if this will work on the Wizard.
Click to expand...
Click to collapse
Why should someone offer himself for your curiosity?
Yes it works on the Wizard/Prophet

Does anyone feel like making some individual cabs for each or some of the plugins?
I know Last Call and I think Calendar have been done before, but what about Battery/Card/Memory, etc?
Saves space and is more convenient.

Windows Marketplace

Here is the cab that is downloaded when you first connect to the marketplace. Hopefully all the chefs can integrate it in.
edit// For those that have a ROM that did NOT come with the marketplace (stock roms for the most part) you will need to create a shortcut to \windows\WMMarketplaceFullClient.exe.

gehzumteufel said:
Here is the cab that is downloaded when you first connect to the marketplace. Hopefully all the chefs can integrate it in.
Click to expand...
Click to collapse
start working or not yet?

b16b said:
start working or not yet?
Click to expand...
Click to collapse
This is work on my WM 6.5 in ELFIN. But this is missing the path icon. I need to find out the exe file on window folder to run.

It does not work on my Energy ROM WM 6.5 (23016) NRGZ28..
It says:
We encountered an error trying to reach the windows marketplace server.
Would you try again?
Anyone got the same issue?

Pitty87 said:
It does not work on my Energy ROM WM 6.5 (23016) NRGZ28..
It says:
We encountered an error trying to reach the windows marketplace server.
Would you try again?
Anyone got the same issue?
Click to expand...
Click to collapse
Yes having the same issue on athine´s build 23047 and on my Toshiba TG01 with stock rom!

I have read somewhere that maybe the problem is localization of the software:
I live in Italy and an italian winmo blog says:
To make it work on italian ROM's you have to change "WMMBootstrap.exe.0409.mui" into "WMMBootstrap.exe.0410.mui" in windows folder
But it does not work for me,
probably because i have Energy's ROM.

Got it working!
But I have a small problem...
I have WM 6.5 English version but I filled in my windows live information all no problem but my marketplace is in Dutch (I live in the Netherlands but I would like to have the US version because now I only have 5 aps)
Anyone who has any idea how to change region?
Thanks a lot

Works fine on my WM6.1 HTC Stock Rom..... not much to see there yet though.....

how often will they update the marketplace with new apps?

deadwrong03 said:
how often will they update the marketplace with new apps?
Click to expand...
Click to collapse
i was wondering the same thing.

deadwrong03 said:
how often will they update the marketplace with new apps?
Click to expand...
Click to collapse
Well, I read somewhere else apps were "flooding" in, but I haven't seen it. Got it working early last night on my stock 6.1 rom (damn CDMA) and right now I see the same apps. Then again, I'm only searching free. I'm a cheap bastard.

I also can't get it to work on my phone. Something with the ROM I have (EnergyROM Photon latest) that caused it to break. It worked on his ROM from 10.02.2009 but not this one.

Thanks gehzumteufel, it works great!
I'm on a stock VZW 6.1 ROM. It didn't automatically create a shortcut in my "Program files" list, so I just created a shortcut (with Resco Explorer) from the /windows folder. The .exe is called: "WMMarketplaceFullClient.exe" in case anyone doesn't see it.

Ahh well I wasn't aware it didn't create any shortcuts. The ROM I run already has the regular marketplace stuff installed so this just replaces what's there. Good to know. Will add to first post.

sniczz said:
Thanks gehzumteufel, it works great!
I'm on a stock VZW 6.1 ROM. It didn't automatically create a shortcut in my "Program files" list, so I just created a shortcut (with Resco Explorer) from the /windows folder. The .exe is called: "WMMarketplaceFullClient.exe" in case anyone doesn't see it.
Click to expand...
Click to collapse
Pardon my ignorance, put what folder to you place a shortcut in to get the program to show up in the Program Files list? I tried creating a new directory under the Program Files folder and a shortcut in that directory but it didn't add it to the Program Files list.
thx.

localized version of marketplace has less apps
rick94 said:
Got it working!
But I have a small problem...
I have WM 6.5 English version but I filled in my windows live information all no problem but my marketplace is in Dutch (I live in the Netherlands but I would like to have the US version because now I only have 5 aps)
Anyone who has any idea how to change region?
Thanks a lot
Click to expand...
Click to collapse
Same here English 6.5, Regional settings set to "English UK" marketplace appears in Greek and has only 3 applications. Changed time to London UK no change in marketplace.
Any ideas for a fix?

I am pretty sure the marketplace has a check routine to figure out what operator you're on and then uses that to check against what region.
TFW_Primus said:
Pardon my ignorance, put what folder to you place a shortcut in to get the program to show up in the Program Files list? I tried creating a new directory under the Program Files folder and a shortcut in that directory but it didn't add it to the Program Files list.
thx.
Click to expand...
Click to collapse
In \windows\start menu\pick a place

Mine has worked without a hitch... I did notice that it logged on and then downloaded another update and required my MSN login details, but then, no probs. It even found an update for some of my apps and downloaded them.. Quite coo..

Yeah this new 10.07 ROM marketplace works on. w00t back to goodness.

Also I just noticed a lot more apps than on Monday.

[CAB] Chinese support(CHS font only now) for Artermis ROM [UPDATED 02-May-2010]

Hi all,
This post is about getting the orginal WWE Asia HTC HD2's font into Artermis ROM.
1) Install the attached cab
2) Soft reset
Note 1: I only tested in fresh ROM environment, which is V10,V11
Note 2: These files are taken from RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
One step closer to stock ROM "Philosophy"

ksk622 said:
Hi all,
This post is about getting the orginal WWE Asia HTC HD2's font into Artermis ROM.
I have tried various cabs before like ricky, RobRedbeard- LIA, sunglobe etc... and i have no idea what are the cabs actually doing. some of them even replaced the original wince.nls, create some junk reg keys, make chinese font in some app overlapping...
Here is the safer technique to get chinese font support without messing around with the system files and registry.
1) Download the attached zip file and extract to your storage card
2) Copy UCSH00B-gray.ttf to \windows
3) Import this registry file, SystemLink.reg
4) Soft reset
Note 1: I only tested in fresh ROM environment, which is V10
Note 2: These files are taken from RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
One step closer to stock ROM "Philosophy"
Click to expand...
Click to collapse
great work on the chinese font!
is there any way of getting the ezInput keyboard from 1.66 asia ROM to work on other custom ROMs as well? thanks

alexnvidia said:
great work on the chinese font!
is there any way of getting the ezInput keyboard from 1.66 asia ROM to work on other custom ROMs as well? thanks
Click to expand...
Click to collapse
I am looking into this as well. will try my luck with the new version of "touch input".

ksk622 said:
I am looking into this as well. will try my luck with the new version of "touch input".
Click to expand...
Click to collapse
looking forward to your findings mate. cheers

temporary solution
I just tested with artermis v10 with the following
http://forum.xda-developers.com/showthread.php?p=6295918#post6295918
steps
1) download the attachment then extract all the files to a temp folder on your desktop
2) go files folder, copy & paste EzInputSettings.exe.0804.mui then rename the new file to EzInputSettings.exe.0409.mui
3) copy all the dll files from those folder name end with .ddl to parent folder (../files). you can skip HTCSipSrvc.dll
4) now go to your device, change SIP to other. change home to titanium
5) go to /windows folder and rename those dll file with same name you modified on your desktop temp folder to xxxx.dll.old( total is 11 files)
6) copy the temp folder on your desktop to your HD2
7) use total commander to move all the files inside files folder to /windows, replace all the dll & files (must make sure no overwrite error)
8) import app.reg
9) soft reset
Finally stock rom chinese support in WWE rom
Now just waiting for a kind soul to help to convert this into cab
UPDATE: Only pinyin and stroke is working...
ABOVE SOLUTION IS UNSUPPORTED NOW

I was reading somewhere that wince.nls needs to be updated to support chinese input???

Leechoonhwee said:
I was reading somewhere that wince.nls needs to be updated to support chinese input???
Click to expand...
Click to collapse
Artermis ROM is using the global version of wince.nls, thats why make this possible. Eg: we can see the 5 chinese legions in setting....

+1
Great work =D
Is it possible to make something similar using the 1.72 HKCSL_WWE stock ROM for traditional Chinese character display and input?
Thanks!

i am also very interest in this ,anyone can help to have a CAB?

yes please
+1
this would be a big help to a lot of users!
including me

global wince.nls
ksk622 said:
Artermis ROM is using the global version of wince.nls, thats why make this possible. Eg: we can see the 5 chinese legions in setting....
Click to expand...
Click to collapse
can you please upload a copy of the global wince.nls for those of us who arent on the artemis rom?
thanks
HPD

hyperpsychodreamer said:
can you please upload a copy of the global wince.nls for those of us who arent on the artemis rom?
thanks
HPD
Click to expand...
Click to collapse
Here it is...

ksk622 said:
Here it is...
Click to expand...
Click to collapse
i replaced the wince.nls, but nothing happened. i still dont get the 5 chinese regions in regional settings. also, can you check if your first post method works for google maps 4.1? in google maps, under settings, speech language, there is an option for mandarin. all i get are square boxes.. it should write chinese language, in mandarin of course. any fix for this?

alexnvidia said:
i replaced the wince.nls, but nothing happened. i still dont get the 5 chinese regions in regional settings. also, can you check if your first post method works for google maps 4.1? in google maps, under settings, speech language, there is an option for mandarin. all i get are square boxes.. it should write chinese language, in mandarin of course. any fix for this?
Click to expand...
Click to collapse
Maybe try the following:
- rename the existing wince.nls to wince.nls.old then copy the new one.
- inside your registry... remove this key [HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink] then import the reg file from 1st post, if everything ok, only 5 entries will be recreated as following
"HelveticaNeue LT 35 Thin"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray);\\windows\\tahoma.ttf,Tahoma"
"Helvetica Neue OTS"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray);\\windows\\tahoma.ttf,Tahoma"
"Courier New"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray)"
"Tahoma"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray)"
"AR CrystalHeiU20 Bold(gray)"="\\windows\\tahoma.ttf,Tahoma"
remember to soft reset ... then enjoy the new font

alexnvidia said:
i replaced the wince.nls, but nothing happened. i still dont get the 5 chinese regions in regional settings. also, can you check if your first post method works for google maps 4.1? in google maps, under settings, speech language, there is an option for mandarin. all i get are square boxes.. it should write chinese language, in mandarin of course. any fix for this?
Click to expand...
Click to collapse
replacing the wince.nls directly doesn't work. You need to use it with reloadnls.exe which will have to be in the startup folder. do a search for it and you will find your answers. I used to write a thread for this as well, so you can try to search for it.

GiantMuffinMan said:
Great work =D
Is it possible to make something similar using the 1.72 HKCSL_WWE stock ROM for traditional Chinese character display and input?
Thanks!
Click to expand...
Click to collapse
that would be easy, if you guys really want it, I mean the traditional Chinese display and supports,
I may make 2 cabs tonight
cab 1: CHT display (mingliu.ttc, pretty fonts) and input (from Samsung HK keyboard),
cab 2: same as the above but added wince.nls with Chinese regions.
please pm to me to show your request in order to let me work on it ( I am currently using the second method )

wow~~thanks!!
it really helps~~
great work great work!!!

dioxda2 said:
that would be easy, if you guys really want it, I mean the traditional Chinese display and supports,
I may make 2 cabs tonight
cab 1: CHT display (mingliu.ttc, pretty fonts) and input (from Samsung HK keyboard),
cab 2: same as the above but added wince.nls with Chinese regions.
please pm to me to show your request in order to let me work on it ( I am currently using the second method )
Click to expand...
Click to collapse
THat would be greeaaat....

Hi Dioxda2,
i ever try your 2 roms.
those are only to display chinese right? not enter chinese right?
thanks in advance for clarifying
jack

Hi
I need hand writing for Chinese input，Can you dump your chinese version ROM and share with us?
Thank you