Related
This seems to be the first real VGA browser from Netfront, absolutely packed with features, Flash, Java etc.. and REAL VGA mode as well as a virtual screen size .....the catch, this is only a technical preview and the thing seems so unstable on my Universal! everytime you try to open a web page the app just closes!
download from here for a limited time
http://nfppc.access.co.jp/english/about_v33.html
Netfront instability
The same thing happens to me on my Jasjar, but there is a kind of workaround. It does not work with the wifi connection, but if you connect via standard internet explorer to a gprs or 3g connection and then open netfront it works fine. I hope they resolve the glitches in their formal release.
But on their website they clearly state that the technical preview version 3.3 is for windows mobile 2003 and 2003 SE. So no wonder it does not work on the Jasjar.
I will though try the work around stated here.
For me the workaround doesn't work.
tried but does not work either
With the workaround no luck for me. Netfront just closes as soon as I hit the "go" icon after typing in a web address.
@ apap could kindly explain the work around you suggest in a bit more detail as we might not have understood properly.
Thanks and Regards
Workaround
I was just following the advice of another user at the wm5 fix site http://www.wm5fixsite.com/index.php?option=com_content&task=view&id=57&Itemid=54
It worked for me, though only when my connection was a gprs/3g connection. Otherwise, with a wifi connection I have the same problem, i.e., the minute I hit the go button netfront dissapears. The important thing seems to be that the connection gprs connection has to be open when you attempt to go to a site with netfront.
I have installed netfront on my sd card and I would suggest a soft reset before you try.
Hope it works for you, apap
Netfront
I think, the problem is with WM5. Have the same experience as you guys with my JASJAR.
Tried it on my Magician (WM2K3se): works like a charm
Cheers
hrb
i tried it on xda iis and i love it!
As I mentioned earlier. There is a problem on wm2005 - indeed it has not been made for 2005 - but at least for me I managed to run it on my jasjar (imate) with wm2005 using the workaround. Before I purchased the jasjar I was using it on my magician and it worked perfectly.
Netfront
Tried it with the workaround:
- Opened IE
- loaded a Website with IE
- Started Netfront
- selected a bookmark
- OK
- Netfront disappears.
Cheers
hrb
Strange. Is there anyone besides me in this forum that has managed to get netfront to work with gprs connection on Jasjar?
Hello,
on my search for a VPN Client for WM 5,0 I finally
found one. It´s Only a Trial-version but however it is the
only version i found that will be able to run under WM 5.0. If you know still different VPN software, which runs also under WM 5.0 please post it!
https://locustpoint1.bluefiresecurity.com/support/WM5_VPN/Bluefire Mobile VPN 2.2.0.190 wm5.exe
User: bfdownload
Password: 2$fireblue
Much fun!
Password not woring :-(
would like to try if possible..
Oh, they have closed the Download-Page...
See attachment!
AnthaVPN is also working on Wm5.
I should have been released a week ago (according to an e-mail I just received), but no info can be found on the website. :-(
This is interesting. I tried Cisco VPC, Antha VPN and Bluefire VPN on my Jasjar and in all cases the programm blocks both the phone mode and the GPRS/UMTS mode, even when the programm is switched off.
Only deleting the programm completely will restore both radio functions.
Any other experiences?
cyberdott said:
Oh, they have closed the Download-Page...
See attachment!
Click to expand...
Click to collapse
BLUEFIRE
IT works (on QTEK9000) with CISCO Gateway of my company;
ANTHAVPN
here the answer received today:
Dear sir,
We are in certificate process with Microsoft. We hope to release within two weeks. Thanks for your interest.
Regards
José González
Worldnet21 VPN Support
BLUEFIRE
IT works (on QTEK9000) with CISCO Gateway of my company;
Can you explain where and how you installed the program and and how you configured the settings. :lol:
Thanks
I installed the EXE downloaded in this thread; I used the usr/pwd (demo account) above.
The configuration reflects the params of my company's VPN (group, user, ike, IPSec...).
Working:
NCP Secure CE Client with a Cisco PIX
English page a little bit behind, german news say its working (and it does )
News-Link(german):
http://www.ncp.de/deutsch/home/shownews.html?show=38
Download Link:
http://www.ncp.de/english/services/testsoftware/index_entry.html
=) Georg
a little question...
does the 3 party vpn replace the ¨built in¨ vpn?
I use it with exceptions and my companies intranet adressers and servers..in the "connects to work" settings.
so if I installs a vpn from another company can use them settings there or how does the internet explorer or outlook connect to my intra net??
manually is not an optiion i think!!
ANTHAVPN beta 5.8
d.zee said:
This is interesting. I tried Cisco VPC, Antha VPN and Bluefire VPN on my Jasjar and in all cases the programm blocks both the phone mode and the GPRS/UMTS mode, even when the programm is switched off.
Only deleting the programm completely will restore both radio functions.
Any other experiences?
Click to expand...
Click to collapse
I received anthavpn beta version 5.8 for the WM2005, installed it on my JASJAR and I had to deinstall as I can't power ON the WLAN/WIFI. As d.zee, deleting the program WLAN/WIFI works on its normal behaviour...
Has anybody received also this beta version and played with it successfuly?
I had trouble installing bluefire to my SD card. Once the install was complete, it created a directory in my device called \Storage Card and renamed my SD to \Storage Card2. As you can imagine, this caused some issues. I had to go into and edit the registry and update the log file paths to \Program Files, remove the \Storage Card directory, and reset the device. Once I did that, my storage card came back, and I was still able to use the bluefire client.
Not sure if this helps anyone.
unstalling VPN BlueFire
Just to let you know, folks.
Unistalling Bluefire from an SD card is quite a nightmare.
I tried doing it from the "remove programs" on the JJ and from the ActiveSync removal tool... but no way..
When I contacted somebody from Bluefire I was answered that there was a problem with SD cards, that the problem was explained in the product documentation -never saw it when downloading the demo- and that their recommendation was to uninstall the software by hard resetting the machine!!...
A suggestion from the Support guy was to install it again -on the device- and the uninstall the whole thing... he was not sure it would clean the registry, etc.
Just to let you know
I have agile working fine on my wizard but it cannot connect on tytn. the internet connection works fine. I get an error from agile saying "cannot connect, proceed to contact list?"
If anyone has this working can I trouble for the installer you used &/or any settings that may need to be configured?
Thanx; Lew
It is working fine in my TyTN, I installed directly from CAB version 3b, download here:
http://updates.am-im.net/AgileMessengerWMPPC.zip
I am using MSN, Jabber (XMPP) and GoogleTalk at the same time.
Thanks for the reply. I failed to specify that it was AIM that was not working.
Interestingly enough I was installing the same version you gave me the link to. However this time it worked fine.
I have run into another issue though... How do I set the voice record button? On my wizard I set it in an older version and it just stayed that button when I installed the newer versions. Now how do I go about setting it?
Thanx again; Lew
P.S. I searched their forums for this, they don't have ANY support for PPC.
I'm using Agile with both Yahoo and AIM with no problems at all...
Can you use push to talk?
I'm sorry, i've never used the PTT button... may be others can help you.
I use imov messenger which is based on the opensource Jabber.
It works great and maintains connections with most of the main messengers.
It is also free.
Paul.
First try selecting Options then Preferences and finally navigating to the Media Tab. If there's not a button that says "Assign push-to-talk button" on it then I think this thread might help as you may have the same problem with versions I encountered. http://forum.xda-developers.com/showthread.php?t=278714
Hi,
I have recently picked up an Orange SPV M3100. I installed skype 2.2 on it and tried to run it. The login screen comes fine, but when I click on "Sign in", it gives me a pop up saying "Skype needs an internet connection to function. Do you want Skype to connect to the internet through a cellular connection?"
When I click YES, I get "Unable to connect to the internet. Please check your network settings."
My internet through IE works fine on GPRS. It is good speed and works excellent. I am able to use MSN Live as well, but Skype doesn't seem to be working.
I've been through posts - where there have been suggestions to check the proxy settings. But there are no proxy settings in the mobile.
Anyone who can help me out here?? Most posts discussed how easy it is to connect to Skype using GPRS and how easy this works. I have been trying for quiet some time to no avail.
Alternatively, can someone give me an older version of this Skype for PPC, which might work for me??
Regards,
Saurabh Dubey
I think you should view this thread...
http://forum.xda-developers.com/showthread.php?t=311938
Nothing works
Hi,
Thanks for the quick response. I have been through the thread. But the thread says that this can still be used for chat. I can't even log on. Any help here??
Regards,
Saurabh
Same here. I have the Cingular 8528 and have the same problem.
Please use the other thread referred to above.
Mike
NEW IMPROVED CABS : POST 3
A very Special Thanks to tucahara, Schap, Jaap de Wolf, Dridder
Note : For HTC devices only, please read 2nd post -below-for non HTC devices.
- 3G, WLan, GPRS Capable
- GPS Works
- Recent Drivers
- Updated Registry
- All Major Codec compatible[ a-law, u-law, GSM ask provider to enable ]
- Integrated with Phone and address Book
- VOIP and Carrier sellectable on today screen
- SIP Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- Dial Plan Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- NAT Enabled
- Echo Canceller
- For WM6.1 and WM6.5
- Tested and working on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K], Xperia X2
- No sound from earpiece ( Please install cab from previous thread but that is only for HTC devices )
INSTALL ON FRESH OS and PLEASE POST YOUR RESULTS GOOD OR BAD. Thanks
THERE IS NOTHING WRONG WITH THESE CABS, SO PLEASE DO NOT COMPLAIN ABOUT CABS. IF THESE CABS WONT WORK, PLEASE READ DIFFERENT POSTS IN XDA AND FIND OUT WHY. MOST COMMON REASON IS DEVICE OR OS NOT SUPPORTRD MEANING DEVICE DOESNT HAVE FILES NEEDED FOR THESE CABS TO WORK.
These cabs are tested, working with different providers-devices and are not for noobs, if you have come across this before, you will find out, these cabs are the best among them.
Outdated Cabs HERE
For non HTC devices, do the following
- Install one of the cabs post 3 matching your OS.
- Fill all required information in setup voip.
- When you try to save you will get a error
- Close it and Run your GPS program.
- Your GPS with get a lock in few minutes as normal.
- Once you find out your GPS program can see satellites, close it.
- Copy and paste dnsapi.dll into your windows folder
- Restart your device and you will have your gps and voip/sip working
- Make sure to fill information in setupvoip again
New improved cabs
New improved cabs with changed dll. Note : Only for HTC devices. For other non HTC devices, please refer post 2 along with these cabs for optimum results.
Reserved for future2
Reserved for future3
Reserved for future4
Calls hang up immediately after being answered
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
nickdo said:
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
Click to expand...
Click to collapse
Samsung WM6.5 drivers not compatible with dlls. Please look at outdated cabs link above and go to last page for omnia solution. It works fine on my omnia with Wm6.1. I have tried on WM6.5 on Omnia with same results as yours.
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
nickdo said:
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
Click to expand...
Click to collapse
you are right
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
That is not right. I have an Omnia 2 i8000 windows mobile 6.5 and I am able to use voip on my phone.It works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. AutoAudioRoute V2.0
4. Copy paste dll in windows folder.
My PDA is i8000NXXJJ1
jukefox said:
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
Click to expand...
Click to collapse
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
bbuhas said:
that is not right. I have an omnia 2 i8000 windows mobile 6.5 and i am able to use voip on my phone.it works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. Autoaudioroute v2.0
4. Copy paste dll in windows folder.
My pda is i8000nxxjj1
Click to expand...
Click to collapse
----------------------------------------------------------
this is not the integrated solution sir. Thanks for time.
----------------------------------------------------------
dhillonbros said:
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
Click to expand...
Click to collapse
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
jukefox said:
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
Click to expand...
Click to collapse
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
dhillonbros said:
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
Click to expand...
Click to collapse
My phone works great with other not integrated solutions like PortSIP or AGEphone Mobile, so my network is fine. And there should not be a problem with the codecs as well as PortSIP (I don't of the codecs AGEphone uses) uses G711U, G711A and GSM as well (I know of them because theses codecs are configurable over the GUI).
I use AVM FRITZ!Box 7390 as modem / router with its own SIP registrar. That means my Omnia II is configured to use my FRITZ!Box as a SIP server whereas my FIRTZ!Box is connected to my VoIP service provider (the popular German internet provider 1&1) and redirects the VoIP packets to them. It is totally transparent to the SIP client therefore no STUN / ALG (I never heard about ALG before) is used between the SIP client and my FRITZ!Box.
I am not willing to create an account at voipvoip.com because I definitely want to use the phone numbers I got from my ISP but I may provide you credentials for testing purposes to use a phone number from my ISP if you like.
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
jukefox said:
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
Click to expand...
Click to collapse
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
dhillonbros said:
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
Click to expand...
Click to collapse
Hello again,
I already bypassed my router by configuring my pbxes.org account, didn't I? Anyway I now switched my router with integrated telephony services support by an older FRITZ!Box 3130 without telephony services to exclude any conflicts with reserved ports or somewhat else. And you know it: Same result.
Last but not least I tried a connection over 3G by activating that option within the configuration. But I failed already with selecting the service. The search action did not succeed.
I'm running out of ideas. What now? Shall I setup an account for you? I really wanna see whether you are able to reproduce my problem or not.
Thanks a lot.