any one thried and work?
i tried xcular but didn't work with hight speed!
thanks
parkertseng said:
any one thried and work?
i tried xcular but didn't work with hight speed!
thanks
Click to expand...
Click to collapse
I use this program and the speed can reach to 728 MHz.
The machine is still stable and running very fast.
I use XCPUScalar 2005 ver 2.93 bought from PocketGear.com
realy!
it is strange!
i downloaded the latest version and installed
it hanged and not responfding after few minutes...
anyone has the same problem?
thanks!
parkertseng said:
realy!
it is strange!
i downloaded the latest version and installed
it hanged and not responfding after few minutes...
anyone has the same problem?
thanks!
Click to expand...
Click to collapse
mine doesn't work as well, strange enough when i plug in the power cable, it does reach to higher speed, and it's quite stable, but when i unplug it, the screen stop responding.
or maybe is it the problem version?
i have the version 2007 v3_01
and how about u, Wu?
regards!
wu5262 said:
mine doesn't work as well, strange enough when i plug in the power cable, it does reach to higher speed, and it's quite stable, but when i unplug it, the screen stop responding.
Click to expand...
Click to collapse
I had similar experiences to you Wu. Happily overclocked to 733Mhz, on AC power, but crashed during movie playback 2 minutes into it.
Tried CPU Scalar many years ago and wasn't too impressed with its compatibility and stability then either. Definately removing it from my Ameo before it causes a major problem...like bricking my device!!
I saw a huge performance increase in WM6 over WM5 on the Universal...my bet is that we will see this same speed increase in the Athena when we get the WM6 upgrade.
Meanwhile, I'm happy with the Athena as is.
i have exactly the same problem like yours, wu!
then how come the other guy is running it normally?
how to get the old version?
parkertseng said:
then how come the other guy is running it normally?
how to get the old version?
Click to expand...
Click to collapse
i am using the newest version from pocket gear.
how about hn1716?
he said he can reach 728mhz and stable
mybe u he can provide us the old version?
mackaby007 said:
I had similar experiences to you Wu. Happily overclocked to 733Mhz, on AC power, but crashed during movie playback 2 minutes into it.
Tried CPU Scalar many years ago and wasn't too impressed with its compatibility and stability then either. Definately removing it from my Ameo before it causes a major problem...like bricking my device!!
I saw a huge performance increase in WM6 over WM5 on the Universal...my bet is that we will see this same speed increase in the Athena when we get the WM6 upgrade.
Meanwhile, I'm happy with the Athena as is.
Click to expand...
Click to collapse
Hi Mackaby007,
I'm still using Dopod 900, but didn't have the guts to upgrade it to crossbow. I'm afraid pf getting stability problems since I'm already very happy with the reliability of Dopod 900 at the moment.
jlingo said:
Hi Mackaby007,
I'm still using Dopod 900, but didn't have the guts to upgrade it to crossbow. I'm afraid pf getting stability problems since I'm already very happy with the reliability of Dopod 900 at the moment.
Click to expand...
Click to collapse
I've not experienced any instability with WM6 on Universal in over a month now. Very fast indeed and much more stable than WM5 AKU 3.xxx......anyway, as this thread is about Athena & Overclocking, I merely mentioned speed improvements in WM6 on another device compared to O/C. We can discuss this further if you like in the Universal forum.
mackaby007 said:
I've not experienced any instability with WM6 on Universal in over a month now. Very fast indeed and much more stable than WM5 AKU 3.xxx......anyway, as this thread is about Athena & Overclocking, I merely mentioned speed improvements in WM6 on another device compared to O/C. We can discuss this further if you like in the Universal forum.
Click to expand...
Click to collapse
YESSS Sooo much more responsive!!! It's like upgrading processor feelings. I guess I don't really need the processor in Athena for now.
Improved XcpuScaler for athena available
There has been a revision of xcpuscaler to version 3.03 (2007) which seems to work fine on Athena.
I have been using it since yesterday and auto scaling works up to 663MHz.
The software interface does not cover the landscape screen fully although you can still make your selections by scrolling doen with the arrow head.
The upgrade is offered free for those who already have the 3.0 version.
Those using it please give your experiences.
Im using XCPUScalar v3.03 the latest one, and my Athena is very stable at 663Mhz (no auto-scale). Can not set it to 728 as it hangs after 20 seconds.
But running it at 663 is more then enough, it is more responsive and can handle 2 tasks the same time ...
I think it will run smoother and more reactive if we disable the auto-scale and running it all the time at 663 Mhz, but the battery life will be a lot shorter of course, I don't really mind as I will get a second battery
victoradjei
you said your using the auto scaling feature and it's stable on your device.
Can you give us more feedback if you are still using this feature??
is the device still stable?? what kind of SW are you running??
Im interested to know actually when you use TomTom, games, media player, waking up the device from sleep mode etc .... how it reacts when the CPU % change all the time.
I'm confused. Doesn't this device have built-in auto-scaling of processor speed? I've played with PocketMechanic, and it seemed to work well. I just wasn't sure it was needed on an on-going basis. The one place I might use it is playing back MPEG2 videos which is laggy in TCPMP. PM helped somewhat. Other thoughts?
hi,
i'm confussed!
the xcpuscalar soft is compatible with the athena?
the athena as a intel processor and the xcpuscalar soft says compatible with omap and scale processors
thanks for your comments
Bart
Works GREAT on my HTC Advantage x7501...TJ
bartito said:
hi,
i'm confussed!
the xcpuscalar soft is compatible with the athena?
the athena as a intel processor and the xcpuscalar soft says compatible with omap and scale processors
thanks for your comments
Bart
Click to expand...
Click to collapse
According to the product description, it supports xscale processor. Athena uses an xscale processor PXA270.
Hi,
I want to build a nice 2D GUI for the Touch Diamond II and the Touch HD. What would you recommend to use? OpenVG or OpenGL? Does the beta driver available on this board improve the performance of one of these?
Can someone give me reference pages (or posts) where I can find information about using OpenVG on the Touch Diamond II (or Touch HD)?
Greetings and thank you,
BenPa85
I've been impressed with Backbreaker HD so far, but haven't tried too much quite yet.
Pulse news reader is a must for tabs, also adfree is good for getting rid of stupid adds.
Iplayer for all the bbcs and myPlayer for itv, ch4, and five.
Also MoboPlayer is excellent video player which can be changed in settings from list view to grid which will give you a very nice 3D video wall.
Worth a look - Tunein radio, tubemate (fantastic download speeds 10mps good for dl full episodes eg ufo.tv).
________________________________________________________________________
ZTE Blade - Rooted OC 729mh CM7 RC2 V nice
Advent Vega - Rooted OC 1.4gh - Corvous5 rom gorgeous smooth and qqqick
Iconia A500 - Rooted - HComb Sweet
i tried to get my player from marketplace but it can't find it!
Any ideas anyone?
Thanks john
Myplayer all one word, skynetsoftware. The quality is a wee bit off but defo watchable for live tv.
__________________________________________________ _____________________
ZTE Blade - Rooted OC 729mh CM7 RC2 V nice
Advent Vega - Rooted OC 1.4gh - Corvous5 rom gorgeous smooth and qqqick
Iconia A500 - Rooted - HComb Sweet
Has anyone got any opinions on performance with either firmware? In terms of how fast/well they perform. FC issues and battery life?
I am currently using Prime 1.6 (without Netformer). Revolver has OC from Netformer built in. I'm trying to figure out which has the best performance/battery. Prime 1.6 with Netformer or Revolver.
If you think Clemsyn is better you can also throw that into the mix. Maybe we should have a shootout using some benchmark apps
netformer at 1.4 is realy fasy
I've installed it just yesterday, and changed the wallpaper to a regular pic (not live), and i gotta tell you the thing is just flying!
i've set the cpu to 1.4 - i could go up to 1.6, but i guess that will have a huge impact on the battery and the temp as well...
Im runing revolver right now and i hinks its pretty good. i have only had my pad for 4 days but have tried out most of the roms and kernals already. best preformance and battery seems to be revolver 1.1.1 (1.1.2 was just a test to see if his OTA app worked) with the elite tegra 18 kernal. not sure if that will work on your i have been told it is unstable for most people who dont have an elite processor. i have model b70 so that might factor into what kernal is best for you
Edit: Benchmarks
Antutu 6393
Linpack 95
Quadrant 3950
Vellamo 1882
Cf Bench 15373,3626,8324
mrevankyle said:
Vellamo 11882
Click to expand...
Click to collapse
Don't tell me it's 10 times faster than an already overclocked TF in Vellamo. I've seen several reports from people with 1.4-1.6Ghz, and they all are in 1100-1300 range, getting 1195 myself @ 1.4.
mrevankyle said:
Im runing revolver right now and i hinks its pretty good. i have only had my pad for 4 days but have tried out most of the roms and kernals already. best preformance and battery seems to be revolver 1.1.1 (1.1.2 was just a test to see if his OTA app worked) with the elite tegra 18 kernal. not sure if that will work on your i have been told it is unstable for most people who dont have an elite processor. i have model b70 so that might factor into what kernal is best for you
Edit: Benchmarks
Antutu 6393
Linpack 95
Quadrant 3950
Vellamo 11882
Cf Bench 15373,3626,8324
Click to expand...
Click to collapse
minor nit pick: kernel
Sent from my Transformer TF101 using Tapatalk
Revolver is really fast, I'm running at 1.5 GHz. I haven't tried out Prime 1.6 yet.
I'm on prime 1.6,i havent tried revolver or netformer,of course i am using nets kernel @ 140000GHz,runs real smooth,even with my live wallpaper,battery doesnt drain too fast.I like running the themes and most of them are only made for prime 1.6.
GwynBleidd said:
Don't tell me it's 10 times faster than an already overclocked TF in Vellamo. I've seen several reports from people with 1.4-1.6Ghz, and they all are in 1100-1300 range, getting 1195 myself @ 1.4.
Click to expand...
Click to collapse
sorry hit the 1 twice. its at 1.64 ghz and getting about an average of about 1800
Hello,
I recently discovered these custom ROM's and was wondering if any of them increase gaming performance of the Galaxy Tab A?
Felblood said:
Hello,
I recently discovered these custom ROM's and was wondering if any of them increase gaming performance of the Galaxy Tab A?
Click to expand...
Click to collapse
I would suggest you to overclock your CPU.