Hi there, I'm about to update my Qtek 9100 to the latest WWE ROM posted last week. Is there anything very important I should know before I do this? I already backed up all my information and files, and I'm currently running on the Cingular US network. I tried searching for the official Cingular 8125 ROM but wasn't able to find it. I really, REALLY want to have the exact same settings as the 8125 does for connecting to the internet so I get full speed EDGE and the best phone signal it can offer. Could anybody please tell me how to set up my Qtek so it's exactly the same, including the E icon when I'm in an EDGE-covered area? I did a search for everything, but all I managed to find were a bunch of posts where everybody knew what everybody else was talking about. I managed to find the cab file named "Signed_Edge_Icon.sa" but I honestly have no idea what to do with it. As I said, I'm completely new to this, and I just want my Qtek 9100 to perform the best it possible can on Cingular's network. Thank you so much!
Cingular Settings
Hi,
Cingular has a blow by blow description of the settings.
https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB56475.html
are the internet settings
.... and .....
https://onlinecare.cingular.com/dev...ingular.atgnow.com/cng/tutorials/KB56044.html
are the MMS settings
And for the cab file, just use activesync (press the explore icon) to drag the cab file to you phone and then tap it to run it.
Cool, I got that cab installed, but I'm having trouble with those Cingular settings... I don't have a "Set up Proxy Server" option under the first My ISP list. I do have it under My Work Network, but to my understanding that is a completely different connection option. Is it okay to have the wap.cingular connection under My ISP and the proxy server information under My Work Network, or should I just put everything under My Work Network and leave My ISP alone?
Through my experience the proxy settings for Cingular do two things (one good one bad) and your decision to use them should be based on which is more necessary to you.
1. The proxy settings allow you to use the MEdia Net homepage at device.home
2. The proxy settings screw with your WIFI connection and cause timeout errors and such when attempting to browse at home.
I personally find that the MEdia Net homepage is nice, but I can live without it or even replace it with other things like google.com/ig.
If you want to enable the proxy settings on the My ISP panel go to the advanced tab and create a new profile where My ISP is. For some reason the new one will allow you to put in proxy settings, but the default My ISP won't.
does anyone know how i can find out what the mac address of my cingular 8125 is? I need it to add to my mac filtering address on my router settings.
Turn on wifi. Then goto settings connections. Tap on the wifeless lan icon. Goto the advanced tab and there it will be. You have to have wifi on to view. Took me some time to figure this out myself.
duman95 said:
Turn on wifi. Then goto settings connections. Tap on the wifeless lan icon. Goto the advanced tab and there it will be. You have to have wifi on to view. Took me some time to figure this out myself.
Click to expand...
Click to collapse
thanks.. funny thing is right when i read ur post, i thought of another way to figure it out. Connect to the network and then go into ur routers dchp settings and look at the client list. It will list ur phone their and its mac address.
Hi,
I would just like to know whether anyone has successfully accessed their corporate LAN using LEAP authentication?
Mine just can't work, no matter what I tried. I am able to access normal hotspots and my home LAN with normal WEP secruity.
Nobody using LEAP at the moment?
I've not got LEAP running on any of my wireless networks, either home or work, however, you may struggle to get it working, given that LEAP is cisco-propriatary and as such, not very many wireless drivers support it. My old Axim x50v had a plugin that supported leap, but I've seen no evidence of this on the Ameo. There may be a commerical plugin available for WM5, but I'm not sure.?
Personally, if you have a choice, Id avoid LEAP following all the flaws found with it, but I guess sometimes we have to live with what we're given.
Yes, I am living with what I am given, because my company is using LEAP for its wireless network authentication.
I'm not sure whether it is the access router that is giving me problems, or WM5 implementation of LEAP was somehow broken. My Qtek 9000 on AKU 2.x was able to log into the network but not the U1000, which I believe has AKU 3.x
Does anyone know of any tool that I can use to help me debug the problem? Like some kind of a trace?
Thought I'd share this in case anyone has problem using LEAP to log into their corporate wireless LAN.
I couldn't accept that my Qtek 9000 can log onto my corporate's wireless but the U1000 can't. Until it struck me that I should do a comparision of the registry between these two. So I fired up my registry explorer and search for "leap" and sure enough there was a difference!
In the U1000, there is this additonal entry "HKLM\\Comm\TIACXWLN1\Parms\HTCPreloadLEAP" that was not present in the Qtek 9000. I noticed this key was set to value 0. Naturally I amended it to value 1, soft reset and tried to log-on. You can imagine my delight afterwards
So now my U1000 is almost the complete PDA solution I have been looking for, barring that PI2005 issue.
As a reminder, if you want to try this fix, do remember to back up your registry first.
Hi chrisoyh, I am sooooo grateful that you enlightened me on this one. Was trying to connect to my corporate LEAP network since I got my phone. Thank you! then I tested this "fix" and could not find anything new in the WiFi. In the original HTC ROM I had there was a LEAP setting that never worked. Now in the WM6 ROM I am using there is no LEAP tab. anyone?
OK - I managed to enable the LEAP tab. Now I'm wondering if you could help me with this. In HKLM\\Comm\EAP\Extension I have keys 13 (EAP-TLS - Smart Card or Certificate) 25 (PEAP) and 26 (EAP CHAP - MSV2 Challenge). I believe that there should be a LEAP key here. Can you possibly have a look and tell me if you have one what are the settings - please? Thanks very much.
Hi nealed,
Sorry but nope. There is no LEAP key under HKLM\Comm\EAP\Extension on my U1000 as well.
What are the settings you set for your WEP key under your wireless profile? Is it "Shared" or "Open"?
Hi chrisoyh,
WiFi Settings: Authentication: Open, Data encryption: WEP, The Key is provided automatically, Then I click Next and on Configure Network Authentication I tick Use IEEE 802.1x network access control - but do not have LEAP in EAP in the drop down box.
Wireless LAN settings : SSID: (the ssid I connect to) - User Name: my domain user name Password: my password Domain fqdn of the domain. authentication Type: Open System.
Just a question - should I be creating the connection in WiFi after setting up the Wireless LAN?
Do you have a LEAP dll anywhere on your machine? Other LEAP registry entries? I'm guessing there must be something missing!
Your Wireless LAN settings is similiar to mine.
As for the WiFi Settings: try using Shared instead of Open authentication. And select PEAP for the "Use IEEE 802.1x network access control".
Let's see whether this helps.
PEAP is Protected Extensible Authentication Protocol. I need to use LEAP (Lightweight) Extensible Authentication Protocol. Also, the authenticaltion is 802.1x open. The above won't work for me. I believe that there is a dll missing which will enable the selection of LEAP under EAP type drop down list. anyone?
Yes, I know the difference between LEAP and PEAP. But that is how it was exactly set up on my Dopod U1000 and old Qtek 9000, and both are able to access my corporate LAN.
There is no LEAP DLL file, trust me.
Also, the Open authentication is set in the LEAP tab under "Wireless LAN" setting. In WiFi tab, I find that using "Shared" authentication is the way to go for me to get connected.
This is not exactly related to the post but maybe you can help me. I am having stupid problems with wifi on th htc. If I use resco explorer to surf by wifi in my home network I see only works if the phone is not connected and previously I made a soft reset. Exactly what happens is I can see previous shared networks folders but If I look in the option "map network" I cannot find other computers.
The other consequence of this is I am having stupid problems with Jet printing because not ever the pda see the network.
Previously I had a jasjar and never troubles with this. I am not happy how is managed in the htc.
Dear All,
Need some help connecting my HTC Diamond to my work WiFI Network. Have tried the previous recommendations in this thread but still no joy.
I have the following:
HTC Touch Diamond P3700
Windows Mobile 6.1 Professional CE OS 5.2.20764 (Build 20764.1.4.3)
Configure Wireless Network:
Authentication: Open
Data Encryption: WEP
The key is automatically provided IS ticked
Use IEEE 802.1x network access control IS ticked
EAP type: PEAP
LEAP tab:
SSID: set to WiFI SSID
Domain: blank
User Name: Set
Password: Set
Authentication Type: Open System
I have tried Shared as previously recommended but no difference.
Please Help.
Thank you
The thing is when i connect through gprs i have to go through a proxy, but when i connect through wifi, the proxy settings have to be disabled.
I found this program BatteryStatus that has this option "Disable proxy when wifi/cradled".
But I really don't need any other options from this program, so i was wondering if maybe someone knew or could come up with just a tiny app that would do the same and only that?
Thanks a lot in advance!
Hi all,
currently I'm using the "internet sharing" feature to use my phome wm 6.5 as bluethoot modem to connect internet
Now I want to connect my company network using a private apn which require a dynamic password provided by a token.
There is no any way to provide the password directly using the computer keyboard?
Or there is not any other way to configure in a easy way this connection each time?
Seem impossible to put the password in the connection settings, launch the internet sharing and set up the bluetooth connection in one minute!
Thanks in advance
Stefano