Hello
I just bought WIZARD from Norway and I cant do anything, because it is locked. But it is not SIM or CID locked it requires user code, wich I dont know.
Is it possible to unlock it!
PLEASE HELP
Regards,
Primoz
Hardreset the phone.
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
search for 'hard reset'
i already did that. With comm button, voice button and reset.
It doesnt work.
If you are sure you have a Wizard and pressing the right button, you may have got it wrong. Or in worst case, one of the button is faulty.
Anyway, detail steps.
Hold your fingers on both buttons, and poke the reset button. INSTANTLY, hold both the button until you see something on the screen. There should be a message saying something like.. press 'send' to restore to factory default.
Thanks henmin.
I did wron hard reset, I didnt holt those two buttons for long enough.
Now it works.
Thanks again.
Related
Hi everybody,
I just can't seem to reset my K-Jam. I tried it a dozen times but it still is a soft reset. Ok before everybody get's angry: I know how to hard reset (hold the two side top buttons and press the reset button). I tried it in different timings like first holding down the two side top buttons then pressing the resetbutton and holding it for almost a minute. Or first pressing and holding the reset button and then the two buttons but it is always a soft reset.
I guess it is a soft reset because I don't get the calibrate screen thing.
Any tips here because I want to get rid of the slowdowns from the virusprogram....?
Wouter
Hi,
I had the same problem. Theres a facility in settings called 'Clear Storage'
start>settings>system>'Clear Storage'
this actually does a hard re-set.
Thanks Webster,
I didn't think of that one! That did the trick!
Wouter
Hold down the Comm Button and Voice Button continuously while tapping the reset hole.
As long as you keep holding down the two buttons, the screen will go black and soon prompt you to hit Send to hard-reset (wipe the unit), or any other key to continue with a soft-reset (reboot).
Thanks Beyondthetech,
I'll try that next time when I need it :wink: .
Great blog you have! Has been very useful in making up my mind.
I'll install TT 5 later now I know how it can be done. :lol:
Wouter
Just a small update
Just to let you guys now. I finally found out the proper way to hardreset.
The trick is not to let go of the Communications and Voice Command button until you have stopped pressing the soft reset hole. Just wait with releasing the two buttons until there is a message on the screen asking you to press the Sent key to hard reset.
Another funny thing is that you can restore a backup (made with Sunny Backup) on another K-Jam device. It still runs. This came in handy because I exchanged mine for another because of some hardware problems.
Wouter
Which one is the "Sent key".
the telephone "call" key (green handset) (left side)
Can someone please advise me, I've brought the Xda Mini S today. I am trying to pefrorm a hard reset and following the instructions from the user manual but it keeps on performing a Soft Reset instead.
What do I do? Please help!
start / settings / system / clear storage enter 1234 and away you go!
Thank you very much Lord Buckingham, it's done now!
Thanks again!
So why doesn't the manual say this, and they way it says doesn't work?
I had same prob, so did a quick search on here. Great wealth of information!
some of users said they were able to do hard reset by buttons,
holding those buttons and quickly pushing soft reset, they said it realy hard to find moment to release buttons...
anyone know the button combo? TIA
hard reset procedure: hold comm manager button (the one on the left), power (on the top) and voice dial button (the one on the right) at same time, and while holding them press soft reset buttton. realise soft reset button (stil holding top 3 buttons and format screen will appear. pres green button and that's it.
wow that's a lot of buttons! will try that the next time i do a HR. thanks
My manual states comm manager button, voice comm button together then reset button
XDA-PLUS said:
My manual states comm manager button, voice comm button together then reset button
Click to expand...
Click to collapse
Thats correct.
No need for the power button to hold.
have anyone gotten that to work..boy have I tried..but I never seem to find the right timing
lynxlynx said:
have anyone gotten that to work..boy have I tried..but I never seem to find the right timing
Click to expand...
Click to collapse
There is no timing...
Just press and hold comm. button and the voicedial button.
Than put your stylus for one sec on the reset hole and still hold the 2 buttons mentioned above.
Than the phone will boot and you will see a screen asking you to press the (green) send button to hardreset.
Panja said:
XDA-PLUS said:
My manual states comm manager button, voice comm button together then reset button
Click to expand...
Click to collapse
Thats correct.
No need for the power button to hold.
Click to expand...
Click to collapse
i had the same problem with hard reset yesterday (my first hard reset ever . after a few tries i found that most proper way to hard reset device is:
1) press & hold comm button + voice dial button
2) press reset button (while holding buttons mentioned above)
3) KEEP HOLDING comm & voice dial buttons
4) after a while hard reset is done, so we can release all buttons
big thx eva_d!
arrggh!
This has been the best forum i have come accross. My phone function ends up as being a blank in the task manager and i constantly by mistake quit i while i am trying to quit something else. a proper pain...
I am tryin to hard reset the phone so i can set it up in corporate mode...i just seem to be completely unableto get it...i have been trying to hold the two buttons and press reset while still holding the two buttons....five minutes later still nothing....arrgh. Any solutions.... :shock:
This is from the manual:
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command
button on the device.
2. Keep the two buttons pressed, and at the same time, use the
stylus to lightly press and hold the RESET button.
Click to expand...
Click to collapse
it is frustrating at first but it is easier with practice. in my experience i released the stylus after about 5 secs and i was prompted with a question if I wanted to format the device [hit send button to start]
Do you really need hard reset?
Did you try clear storage?
Some times it is enough to clear your phone...
If you're feeling generous, can you try hardreset using VJEschaton?
I've never tested it on WM5 hardware, I haven't had a good reason to hardreset yet.
V
VJEshscaton now works on the Wizard, although I think there are easier ways to reset our phones Eg, using them!
V
fresh123breeze said:
Do you really need hard reset?
Did you try clear storage?
Some times it is enough to clear your phone...
Click to expand...
Click to collapse
Is there any difference?
Because i tried that and i think they do the same job!!!
hey guys, please help me...i bought imate jam used one form some of my frnd...now i want to hard reset ...can anyone tell me how can i do that...and one more thing lets say i hard reset it, will it setup automatically or do i have to put everything on my behalf....please help me....
Push the bottom button and quickly hold the Power button
If that doesn't work, try the other buttons. I think it is the power button.
It will setup and runs nicely as a phone. No worries.
Yup,
Its the power button. Hold your power button and soft-rest your device for a Hard reset. Yu will then be prompted with a screen saying your device will be customized automatically in 3secs. If you want to save space, skip that by a soft-reset again.
Regards
Carty..
Hi, a helpfull friend has set the WM5 password to strong alphanumeric and has forgotten it,or just wont tell me what it is. Can anyone tell me, how can I get around this to get MDA Vario working again?
Many thanks
I think a hard reset may fix.
But I am not to sure.
I have tried that, device is still coming up with password request.
All I can think of is flashing it with a new ROM but if it goes bad it could kill the device and I am not sure it would remove it but in theory it should. Other members may have some hacks to fix it.
A hard reset will definitely remove the password, maybe you are just soft resetting the device.
I have tried as says in manual many times, it comes back up with the password screen every time.
I can only try it with MDA:
Turned off
Turned on with password screen illuminated
Manual says:
88 Managing Your MDA Vario
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command button on
the device.
2. Keep the two buttons pressed, and at the same time, use the stylus to lightly
press and hold the RESET button.
RESET button
Voice Command button
Comm Manager button
I have tried it with MDA:
turned off
turned on showing password screen
Sounds like you are doing the reset wrong....
Hard resets are awkward - hold in the two top side buttons, press the reset and keep holding the top two buttons after you have removed the stylus from the reset hole. About four seconds should do it.
Hope that helps.
you'll know if you got it because you'll get a black screen with white lettering that says "press send to format" or the like
otherwise its just a soft reset. On an older ipaq I had, if I had a password it would ask on teh PC everytime I synched. This was with PPC 2003. I'm not sure if you'll still have a problem when you try to sync your data though.
Good luck.
Bilbo_28 & others - You were right, I was not doing a hard reset properly and getting only the soft reset.
It seems after doing it a few times, that the hard reset instructions in the manual should read something like:
hold in the two top side buttons, both the send and receive buttons leds should come on and stay lit.
Insert the stylus in the reset hole and observe both send and receive buttons extinguish
remove the stylus from the reset hole and keep holding the two top side buttons until:
The screen goes black and the following message appears:
Press send to restore
factory default,
Other keys to quit
Release the top two side buttons
Then press SEND to restore factory default
or press any other key to abort hard reset
I think an e-mail to T-Mobile telling them to update the manual would not go amiss !!
Many thanks for your assistance.
Thankz man
hey thankz man really got a great relief
Wow. I was doing the hard reset wrong. I had the same password problem. But now its stuck on the "align screen" menu wth? It moves the cursor around the screen and yet it comes back to the menu. I've run through it at least 10 times now
Hi,
Desperately trying to hard reset an MDA Vario.
Holding comm button, voice command button and hitting reset but after 100 times its just not working.
Is there another way of doing it? Just what am I missing??!?!
Thanks in advance,
HPJ
You are doing it the correct way, after you hit the reset button you should see something like "Press send to restore factory default" you should then press "SEND" ie: the green telephone button.
You could also try "Settings/system/Clear Storage"
Cheers.
That did the job, thanks. No idea the usual way would not work, and its good to know that 'clear storage' performs a hard reset....I orginally thought it may only do a soft reset!
Cheers
Could it be that you were still holding the buttons in after you pressed reset?
You have to let them go as soon as you press the reset.
Cheers
Dave... said:
Could it be that you were still holding the buttons in after you pressed reset?
You have to let them go as soon as you press the reset.
Cheers
Click to expand...
Click to collapse
as well, I struggled with this for ages as well. On my Wizard with the latest imate ROM you have to HOLD the Comm Mgr + Voice Dial (and when still held in) press & release the reset button BUT CONTINUE TO HOLD THE TWO BUTTONS until a message appears on screen saying press the green send button to Hard Reset
Dave idea "Settings/system/Clear Storage" is better..i was struggling with hard reset