Related
Hello all. I got a TMobile Wing from US (I'm from South America), but it's SIM Unlocked.
Anyone knows where can I get a "unlock code key generator" where I can input my IMEI and it gives me my SIM Unlock Code!???
I'm not willing to pay U$ 35!!!!!!!!!, because the phone already cost me a fortune here.
After reading the WIKI, I saw that at this point there's no way (except paying to some obscure website) to unlock the wing.
My points are:
1) How hard can It be to unlock it, because:
1) the website can do that, and I'm pretty sure they're not using the official way.
2) I only need SIM unlock. When I use my SIM card, it asks for an unlock code. I'm assuming that the unlock code is a function of my IMEI number.
If there are code generators for other HTC models, how different the algorithm can be? And, of course, the guys from that website most probably have broke it.
3) I used to crack 68k code long time ago on my Commodore Amiga. Is there any emulator or something? A debugger like softice? Who's working on the unlock code generator? Can I help?
I've been going thru the herald forums for months now, and I have yet to hear of anyone being able to bypass SIM lock on the herald ...
I'm sure if you could figure out how to unlock, it would be much appreciated by the whole community.
i second that.... hope you find a way man... because ive been itching to get my wing working... 35 dollars for a code? that would be too much... some say they can get it from t-mobile for free, you just have to contact them... the problem with our situation (yes i bought mine from ebay also), we do not have a contract with them. i tried it already and they were not willing to help unless i am the subscriber myself asking for the unlocking. i tried contacting the person i bought my phone from but i got no answer.
duprade said:
I've been going thru the herald forums for months now, and I have yet to hear of anyone being able to bypass SIM lock on the herald ...
I'm sure if you could figure out how to unlock, it would be much appreciated by the whole community.
Click to expand...
Click to collapse
I was Olipro's tester for his hard-spl, and after it was done, my O2 terra was sim unlocked.
I have no idea how it happened, though
Ok. This is a request to everyone that has an unlocked t-mobile wing. I have a wing and I have been looking at attempting to find a free solution for sim-unlocking this device. Now the only other device I know about with a good unlock solution was the wizard, and that was a wonderful unlock solution. There are two ways currently I have been looking at for the unlock. First tear apart every part of the SPL/IPL until I can find the section related to the sim and its restrictions. The second which has to be possible but maybe more difficult would be to determine the relation between IMEI and sim restriction code. I have looked into this before on other devices and have found no matter how slight there is always some relation. While I go over the ROM I want to ask anyone who has unlocked their WING using an unlock code to send me a copy of your IMEI and the sim unlock code you used. I hope if I can get enough codes and IMEIs then I may be able to come up with a pattern for how they are generated and test it.
Last thing. I have heard which I have not yet tested since I want to keep my WING factory stock so I can have a good test environment for working with the device, that some people have unlocked their devices by flashing the stock HTC branded ROM to their device. If this has worked for you I would like to know which ROM you used and your current IPL/SPL versions and your previous IPL/SPL versions.
I know this is a lot to ask but here is to hoping for freedom for our Heralds.
Turbo777 said:
Ok. This is a request to everyone that has an unlocked t-mobile wing. I have a wing and I have been looking at attempting to find a free solution for sim-unlocking this device. Now the only other device I know about with a good unlock solution was the wizard, and that was a wonderful unlock solution. There are two ways currently I have been looking at for the unlock. First tear apart every part of the SPL/IPL until I can find the section related to the sim and its restrictions. The second which has to be possible but maybe more difficult would be to determine the relation between IMEI and sim restriction code. I have looked into this before on other devices and have found no matter how slight there is always some relation. While I go over the ROM I want to ask anyone who has unlocked their WING using an unlock code to send me a copy of your IMEI and the sim unlock code you used. I hope if I can get enough codes and IMEIs then I may be able to come up with a pattern for how they are generated and test it.
Last thing. I have heard which I have not yet tested since I want to keep my WING factory stock so I can have a good test environment for working with the device, that some people have unlocked their devices by flashing the stock HTC branded ROM to their device. If this has worked for you I would like to know which ROM you used and your current IPL/SPL versions and your previous IPL/SPL versions.
I know this is a lot to ask but here is to hoping for freedom for our Heralds.
Click to expand...
Click to collapse
Why not just call t-mobile and have it unlocked for free?
Because he wants to come up with a free solution.. I may call T-Mo and get a subsidy code and send it to ya.. look for my PM later this week.
Just Got the Code from T-Mobile
I called T-Mobile yesterday, asked them to unlock my Wing. They took my phone info (IMEI) and today I got an email with the unlock code. Just put in a Cingular Sim put the code and ready to go. the best way to do it. I also have a T-mobile MDA and because I was willing to do testing with this device I used the steps to unlocked in Wizards forums. It worked excellent...
Just call T-mobile...The best way to go.
Hi!
Can You help me with unlocking code?
I will appreciate very much!
Not everyone buys their wings from T-Mobile. I would assume that's why he's interested in creating a way to unlock them.
This is what you do. Pick someone you know who has service from T-Mobile. It does not matter what kind of phone he/she is using. Have them call T-Mobile and say that they are planning on going overseas and would like to unlock their phone. They will ask for the IMEI number and an email address. Give them the WING's IMEI number and in about 24-48 hours they will send the unlock info to the email address. Worked for me and I hope it works for you.
wordizbond007 said:
This is what you do. Pick someone you know who has service from T-Mobile. It does not matter what kind of phone he/she is using. Have them call T-Mobile and say that they are planning on going overseas and would like to unlock their phone. They will ask for the IMEI number and an email address. Give them the WING's IMEI number and in about 24-48 hours they will send the unlock info to the email address. Worked for me and I hope it works for you.
Click to expand...
Click to collapse
Thats all good and dandy bit i believe as with all other phones he wants it unlocked on his own .. As would i as i just got 1 yesterday. have been away for a while as I was ill and seen a lot of new people and new ideas .. But I too want to cid unlock it and change this horrible rom that pre-installed . Worst piece of mess i have seen besides windows vista.
Please help for I'm at a loss. I'm new, but I've tried to read all the posts about unlocking the Herm100. I've finally got the nerve to execute Auto_unlock_v3.bat. I did end up with the tri-color bootloader that showedHERM100, IPL-1.01 and SPL-1.40.01 Olipro. But the the rest of the procudure did not complete. At that point I was able (with active sync disabled ) to connect with the computer via USB and the "serial" indication on the tri-color changed to "USB". Because of lack of success, I shifted to "Manual Instructions". Upon executing SSPL-Herm.exe on the device I got the tri-color screen as anticipated but the Info read IPL-SSPL by Des and SPL-1.09. ds. When I connected the USB to the computer, the computer stated that I had an unknown device and that the USB was not recognized. The "serial" in the white tr-color stayed "serial" and I could proceed no further. Later, when I restarted my bootloader again, I got IPL-1.01 and SPL-1.40.Olipro. Should I maybe not run the SSPL-Herm.exe and proceed to run RUU_HERM_unlock_v3a.exe via the bootloader that allowed me the USB connnection? Please help . this is my first post.
Me too
After successfully updating my 8125 last week I thought updating my 8525 would be no problem...
I ended up with the same scenario as the above post.
I'll be honest with you. I had this little dilemma not too long ago and discovered that unless you want to pay close to $50.00 to get it unlocked from one of those unlocker sites, you MUST request from AT&T to process your subsidy unlock code. Almost all wireless carriers that sell phones with their branded name on the device or on the splash screen are locked to that specific carrier, for marketing or whatever the company desires. You must obtain your IMEI number, (just enter *#06# on your keypad) call AT&T customer service, request a subsidy unlock code, (just tell them you plan on using the device overseas and are not interested in their overseas calling plan they will then try to sell you) and wait about 1-2 weeks for an email reply. Trust me when I say this, AT&T has NO IDEA what the code is or what the status is once they have submitted the request. It is transferred to their "Tier III" tech support division, which is why it takes so long to respond. Just wait it out, and your patience will pay off when you receive the email. I'm sure you know that once you get the unlock code, all you must do then is insert a SIM from any carrier other than AT&T, reboot, and your hermes will prompt you to enter subsidy unlock code. It is usually either an 8 or 9 digit code. Be careful when entering, as too many wrong attempts will "Brick" your device. It is then you will be able to use T-mobile's service. I also had my number ported to T-mobile's network...All you have to do for that is ask T-mobile(Don't tell AT&T) to port your number for you and ther's not a damn thing AT&T can do about it. Now. As far as ROM flashing is concerned, I had to learn by thumbing through the wiki, anf forums and making many posts like yourself. First, as described by ultramag, you MUST install HardSPLv7 on your phone. once that's done and you have verified via your bootloader screen (pwr+ok+reset sw) It should say something along the lines of HERM100 IPL-1.04/HERM100 SPL-2.10.Olipro-----> Then you can start looking at flashing ROMs. Don't worry about flashing Radio ROM, that's not necessary. Any questions, send me a msg.... Good luck flashing!!!
For beginners it's always best to start at the beginning. Go HERE to a page that I created for new members that has links to EVERYTHING you may need to know about fixing your phone, flashing ROMS and Radios, etc.
Best wishes,
Unlock 8525
stevebonning, thanks for your help . I'm also grateful to fredline12002 for answering my plea. I'll get right on to reading the links and studying more. Here's a little background on what prompted me to post on the forum:
Bought the 8525 as a refurbished phone on E-bay.
Contacted AT&T to get the unlock code. I used the 15 digit IMIE# printed inside the phone, behind the battery.
AT&T affiliates sent me an 8 digit unlock code and stated in the email:
"You only have five (5) tries to unlock the phone:
Do not attempt to enter the code more than five (5) times total.
If this process is unsuccessful five times in a row, the phone will be permanently locked to the AT&T network."
I have already tried 4 times without success. I have one try left. Each time the 8 digit number was input, the phone seemed to not accept the number unless it was one digit more. I had to input another digit in order to proceed forward.
Suspecting a wrong IMIE#, I used *#06# to confirm. This IMIE was now a 17 digit number. It was the same as the original but had additional digits of "01" at the end.
I called At&T and advised them of the IMIE with the additon of digits "01" and asked them about possibility of a wrong unlock code. They said the additional digits did not make a diiference. They referred me to HTC Support.
Help from HTC support was fruitless.
I then bought services of a remote unlocking service from CA. The Procedure aborted and unlocking was unsuccessful. Money was lost.
I then started reading Xda-Developers Wiki and threads and attempted unlocking on my own. Thus my original post.
Since my post I have again run AUTO_Unlock_v3a.bat. The program this time indicated success. But, when I booted up with a pre-paid T-Mobile sim card the phone asked again for an unlock code.
I don't understand what is happening and what I need to do. Thanks for the links, I'll keep on researching more.
Unlock 8525
Success!!! Thanks.
I just unlocked my 8525 after talking with ATT, gave them my IMEI number, waited on hold for 5 minutes, entered the code after inserting a T-Mobile SIM card, and it unlocked just fine.
withOUT needing to run that updater.
I have CRCv12 ROM and olipro, and have updated the radio a few times in the past, so that may be why I didn't have any issues.
But, I now have my Fuze! Buhbye Hermes!!!
Hello guys,
Does anyone know if the turbo sim will bypass the sim lock on the htc tattoo?
if you have it try it and tell us, but if you don't i would recommend you to unlock it via imei preferable.
Flashing Won't remove CID lock
Hi
I have tried several methods on here to change from my UK Orange branded Tattoo.
I purchased an unlock code, but this was just based on the IMEI from HTC & didn't allow me to use any other sim.
Orange have really butchered the software to stop you using a different network.
I have managed to remove the Orange branding & got back the standard HTC apps.
However the Orange CID (customer ID) still remains & prevents any other sim being used. Even with the HTC software the APN is still greyed out.
Eventually I bought an I-sim2008, a few websites have them but I chose ebay.
With this underneath my sim it bypasses the CID check & allows me to use a different sim card.
Many people have claimed to use the phone with a different sim, but this is the only method I have found to work, I have spent about a week non-stop flashing, I now believe the only way to remove the CID would be on a rooted device with a custom ROM image.
Hope this helps a bit?
Up to now there is no development on the root or rom side, either not many people have the Tattoo or they dont' think it's worth while doing.....
Lets keep our fingers crossed.....
yash08 said:
Hello guys,
Does anyone know if the turbo sim will bypass the sim lock on the htc tattoo?
Click to expand...
Click to collapse
What network is it on?
Codes for Orange UK have been a problem. The codes are correct but you need to flash the right rom.
The Italian locked Tattoo's don't have any problem with regard to unlocking.
jusumgeezer said:
Hi
I have tried several methods on here to change from my UK Orange branded Tattoo.
I purchased an unlock code, but this was just based on the IMEI from HTC & didn't allow me to use any other sim.
Orange have really butchered the software to stop you using a different network.
I have managed to remove the Orange branding & got back the standard HTC apps.
However the Orange CID (customer ID) still remains & prevents any other sim being used. Even with the HTC software the APN is still greyed out.
Eventually I bought an I-sim2008, a few websites have them but I chose ebay.
With this underneath my sim it bypasses the CID check & allows me to use a different sim card.
Many people have claimed to use the phone with a different sim, but this is the only method I have found to work, I have spent about a week non-stop flashing, I now believe the only way to remove the CID would be on a rooted device with a custom ROM image.
Hope this helps a bit?
Up to now there is no development on the root or rom side, either not many people have the Tattoo or they dont' think it's worth while doing.....
Lets keep our fingers crossed.....
Click to expand...
Click to collapse
Thanks for the heads up dude. Have you tried to enter the code after flashing the rom?still no good?Well, Ive seen a good place on the web where I can get a I-smartsim 2008 and its much cheaper than buying the code.
ferraripassion said:
What network is it on?
Codes for Orange UK have been a problem. The codes are correct but you need to flash the right rom.
The Italian locked Tattoo's don't have any problem with regard to unlocking.
Click to expand...
Click to collapse
So ferraripassion you assure me that if I flash the ROM, the code will work?
Ive been in touch with htccode and their prices are really good (compared to others on the web) but problem is that they do not have a money back policy in case the code doesnt work. From the various reviews Ive read here and there, I dnt think I should invest in something that might not work when I have the I-smartsim.
On the other hand there is unlock-now, their prices are a bit higher but they assure me a money back in case that their code does not work on my mobile. I think Ill give it a shot. I have nothing to lose, if it works Ill be very happy if it doesnt ill have my money back
Well, thank for your comments guys. Have a merry christmas 2009 and a happy new year 2010
Cheers
yash08 said:
Thanks for the heads up dude. Have you tried to enter the code after flashing the rom?still no good?Well, Ive seen a good place on the web where I can get a I-smartsim 2008 and its much cheaper than buying the code.
So ferraripassion you assure me that if I flash the ROM, the code will work?
Ive been in touch with htccode and their prices are really good (compared to others on the web) but problem is that they do not have a money back policy in case the code doesnt work. From the various reviews Ive read here and there, I dnt think I should invest in something that might not work when I have the I-smartsim.
On the other hand there is unlock-now, their prices are a bit higher but they assure me a money back in case that their code does not work on my mobile. I think Ill give it a shot. I have nothing to lose, if it works Ill be very happy if it doesnt ill have my money back
Well, thank for your comments guys. Have a merry christmas 2009 and a happy new year 2010
Cheers
Click to expand...
Click to collapse
It worked for me, bought the code in htccode.com, flashed my device and everything ok.
MiSSigNNo when you enter HBOOt, do you have an option <simlock>?
ferraripassion said:
What network is it on?
Codes for Orange UK have been a problem. The codes are correct but you need to flash the right rom.
Click to expand...
Click to collapse
What would the correct ROM be for one on Orange UK?
I have used the RUU Click HTC WWE 1.67.405.6 WWE release signed NoDriver.rar from their website & am still having problems getting any other sim card to work.
As mentioned in my last post, I have been trying for about a week to get it working.
@yash08: I have this option, but when I tried to use it I got an error about files missing of the mem card?
@jusumgeezer: Am no expert, really and I might be completely wrong on this, but from what ive understood is that tattoo's not from orange uk dont have this <simlock> option, and orange uk does. Might this be why we cant use an imei generated code? Must we unlock this some other way?
By the way, I flashed and bought the code and it does not work neither!
Same as me then, got rid of the orange branded rubbish & got all the HTC stuff back, but still need the i-sim2008 to use another sim card. Otherwise it just gets stuck on the "unlocking Sim Card" screen or the APN is greyed out.
Well on my side I am very satisfied with unlock-now.com service. As soon as I supplied a video proving that the code didnt work, I got a refund without any hassle. Was like a knife in butter . They are very professional, I recommend their service to anyone.
Now I am just waiting for the I-SmartSim 2008 to be delivered. If this can be of any help to anyone, I bought it from here: http://www.dealextreme.com/details.dx/sku.12167.
Hey guys are there any developments on unlocking Tattoo from Orange UK, it's been more than a week that i got the phone and i still can't use it, it's driving me crazy.
Nobody knows what should flash ROM code to take HTC Tattoo Orange UK?
The only solution is as per the link above, that is how I got my Orange phone to work. It is the only known solution to date even though it is just a workaround and far cheaper than an unlock code.
http://forum.xda-developers.com/showpost.php?p=5229016&postcount=11
Code I have already paid. And the phone for sale, it will be difficult to explain why the client needs turbosim.
Hello
Could You tell me please which ROM should i use to unlock this handset? I've got the code...
I've tried:
r2-mcr-tattoo-withadditions-signed.zip
Says "network unlock success" but still not working
and this one:
fyodor-TattooROM_v0.5.3.1.zip
Says "network unlock success" but after this freezed on "Unlocking SIM card" for around 20 mins and I'm still waiting...
Any advices?
Thank You
hi guys,
i just want to know if the i-smartsim is the only thing needed to unlock the device or will i have to buy an unlock code as well?
If i choose this phone, it will be locked on Orange Fr network.
Thanks for your help.
Well the ismartsim is no more needed. If you get the last ROM update from Orange, you will be able to remove the simlock with a imei based code.
And to answer your question, no you dont need to buy a code if you use the ismartsim but as I said you can unblock your phone with the code now.
Ok, thank you.
I've order both the phone and the ismartsim (just in case )
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
I had similar issue my w580i. I had it after putting the unlocking code it stop recoganising SIM, havn't solution till now
Did you try using a different Rogers sim?
I don't have a rogers SIM, only AT&T. I bought the phone locked and just figured I would be able to get an unlock code like all the other phones I've had before, but no dice.
Check your pm
Sent from my X10a using XDA App
I just tried to put in my deactivated Rogers SIM card from long time ago, and I am also getting "No SIM Card" ... Not sure if your problem has anything to do with Rogers Wireless used to be "Rogers AT&T" before
If you have any friends has SIM card from different carriers, try to put those in and see if you experience "No SIM Card" issue.
Regards
Mabye it does.. I'll try and find someone with a Tmobile sim I guess.. thanks for the advice though..
Please keep me updated on this, I'm trying to unlock my X10, I got the code from cellunlock.net through the manufacturer and keeps telling me after I enter the code that it was unsuccessful.
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
junkk29 said:
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
Click to expand...
Click to collapse
Got an unlock code, www.cellunlock.net
Make sure to pick the Sony Ericsson Manufacturer code it's 34.99 but well worth it. It works now.
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Jikenda said:
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Click to expand...
Click to collapse
How old are the sim cards? If they are old, get new ones. Also, try re-installing the firmware through seus and then putting in your sim card. I never had that issue, I just had a hard time finding the code.
I had a real old one from cingular, but then I just went to AT&T and got a brand new one, but same issue. I'll try updating and see if that helps, but will the phone update without a valid sim inserted?
Jikenda said:
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
Click to expand...
Click to collapse
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
RumpleStealthSkin said:
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
Click to expand...
Click to collapse
I'm sorry, what is the PUK number for and also, why does AT&T need my IMEI number? I mean, the phone is still locked to rogers right now regardless, right?
Lots of noob questions, sorry.
Also, i already spoke to AT&T, Rogers and Sony Ericsson about the issue, but none of them are any help of course. The PUK did nothing for me either. I feel like I am running out of options here...
welcome to the club
http://forum.xda-developers.com/showthread.php?t=717414&highlight=phone+stuck
so far no solution
So, I tried repairing through PC Companion and then I also ran the update and go the newest firmware installed now, but still same problem. Phone does not recognize the AT&T when inserted and therefore, no option to enter the network unlock code. Any others have any luck/make any progress??
wow... i guess i'm in the club as well. I just got back from the Rogers store and they wouldn't let me replace the phone anymore. I've bought the manufacturer's code which is suppose to work 100% but it didn't...so desperate
Sorry to hear that...
You said the code you got didn't work? In what way? did you try to get a refund by providing video evidence?
On a side note, does anyone know how to access a keypad on the x10 that enables you to imput the left arrow, *, * left arrow method to input the code? I realize I need to have a valid rogers sim inserted in order for this to work, but I do not see how to input the arrow keys. Any suggestions? As I've said, I'm new to android and to a device with no physical keyboard, so maybe this is very simple...
thanks and good luck to others in the same spot as me right now..