I just paired my BT headset with my Wizard and it works fine for phone calls, but it won't work for the sound coming from Windows, which still comes via the handsfree speaker of the device.
Is there any possibility to get the Windows sound on the BT headset?
As of right now, it is still under works as A2DP is required to have the sounds from Windows processed to a BT headset. People using the Magician have had luck and we can now listen to WM10 through our BT stereo headset.
There are two main problems:
1. Getting A2DP set correctly so that everyone can enjoy it.
2. Having it work in mono based BT Headsets.
Mono is not problem for Wizard:
http://www.pdaphonehome.com/forums/showthread.php?threadid=54951&perpage=20&pagenumber=1
Stereo (means A2DP) is not available yet.
Music to your BT headset
a0aa7130b6fd13dda5e5eca45b2cf09ca2ec024e
Music to your BT headset
Isn't there another way to do this without installing a program? I know I normally listen to my music using Windows Media Player with my BT headset. What I do is tap the device unlocked on my PPC's today screen. This locks the phone. After that I hit the button on my Motorola H3 and this cuts it on but does not start the voice dail features on my phone. Once it is on, I just unlock the phone and now all sound is sent to my BT headset. It's pretty cheezy but it works for me.
Music to your BT headset
I just bought a headset for my Atom Exec and I can't work it all out, I want to listen to music from the memory card so I have set the bluetooth to Hands Free, Wireless Stereo and headset, all three are ticked. All is working fine but the only problem I have is when the phone rings you can only here it through the stereo headphones which makes sence but I can see this causing problems if I put the headphones down, I will miss calls as I want hear the phone ringing. Is there a way to make the phone ring also threw the speaker on the phone as well while using the headphones?
Unfortunately I don't think so. If you turn the Stereo Headset profile on all sound is routed to the headset. If someone knows how it would be great.
What you can do instead is set the phone to vibra + ring mode so that if you don't have the headset on, at least the phone will still shake.
hi Seal,
which bluetooth headset did you get? i'm asking because i just got the atom (not exec) and can't get the BT to work as a wireless headset - it only works when making calls.
also, you mentioned 'wireless stereo' checkbox, i don't see this option in the atom but it could be an exec feature.
thanks.
Hi, I bought the Plantronics, I use them every day and love them, it is such a great thing to not have wires hanging around.
http://www.plantronics.com/australia/aus/products/cat5180067/cat5620033/prod29780013
"I has an Atom", and I also have a mono, ordinary Bluetooth headset (Planex BT-03HS).
Seal: try turning off the Wireless Stereo profile, then getting this program called BlueMusic by Teksoft - it has an option you can uncheck that will allow the ringtone to come through its original source instead, while still routing music through your BT.
Yes, the program can do this even in unlimited trial mode - however, it only puts your music back on the BT band after a call in full-mode. I have no idea if this will work on stereo headphones like yours, but it's worth a shot.
Slamming_Sammy: With BlueMusic I can pipe stuff from TCPMP to bluetooth headset - which supports only handsfree - just fine, whilst still not missing a call. BlueMusic emulates the A2DP protocol so your phone doesn't have to. There's actually a free binary out there called BTAudio (which Bluemusic is based on), but its less stable than Bluemusic when it comes to disconnects and receiving calls.
Oh, and by the way, the Atom does support Wireless Stereo (A2DP). However, you can ONLY see it if your bluetooth headset has the profile as well (mine doesn't by the way). AFAIK only stereo headsets have this; even the newest BT2.0 mono headsets don't.
thanks a lot Ultimate. I was just about to try btaudio which by the way, works great, so I won't try bluemusic yet. so you're saying if my BT headphone is A2DP capable then I wouldn't need to run btaudio to route audio to my headset?
thanks.
Yes, that's what I'm saying.
Bluetooth stereo headsets are expensive, tho, AND the Atom is known to have dodgy A2DP support (except with BT2.0 devices), so you might want to hold out on the purchase.
I’m running the official HTC (Dutch) Windows Mobile 6 version on the HTC X7500.
I’m using a Motorola HT820 Stereo Bluetooth headset to listen to music by A2DP.
I’m using a Jabra BT5010 Bluetooth headset for voice calls.
Voicecalls with the BT5010 are no problem at all. Listening to music with the Motorola headset is no problem too, when the Jabra IS NOT connected (turned off) at the same time.
The Motorola stereo headset and the Jabra BT5010 can both be connected at the same time, they are even working (I can call with the Jabra and listen to music with the Motorola) but now and then the stereo music is lagging.
When it starts lagging in stereo audio playback it doesn’t seem to stop anymore. Sometimes the music continues the normal way, and sometimes the lags will come up again a few seconds later.
There are no more lags when I then shut down the Jabra headset.
Is there a way to solve this? It looks like some sort of “Bluetooth bandwith” issue since it only happens when both headsets are connected.
Please note that even though the Motorola HT820 can make voice calls too, I only checked the “Wireless Stereo” service to be used, and “Wireless headset” is only selected for the Jabra.
Adding/editing registry entries like BitPool, UseJointStereo, MaxBitPool, SampleRate and all WILL NOT resolve this problem, I’ve already tried that.
Thanks guys!!
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a solution to have the same clear sound in a phone call as i have when lissen to music.
i found another annoying bug. When a call are finished it shutdowns the bluetooth connection just for a few seconds so my headset disconnects.
Has anyone a working connection with HBH-DS200 headset?
I suspect it's my Tilt's problem coz A2DP drop happens to my DS220 and car kit JVC BT-1