Hey all
I've noticed that the connector on the bottom of the XDA II is similar to the connector on the bottom of the SPV E200, is this true?
does this mean accessories with the e200 will work with the xda ii?
thanx
my wallaby cradle works with my himalaya which is pretty nice because it's better quality imho
you can check Wiki if any connector for the e200 is present there so you can verify if it's the same for that too
Related
I am thinking of upgading my MDA Compact very soon.
My question is,
Does anyone know if my accessories
for my MDA like a Cradle and Leather Case will fit the 'Prophet', for instance the usb and audio ports?
1} All my sync cables for my JAM also are working in my Prophet, including the car charger one.
2} My iMate JAM cradle from BoxWave perfectly fits my Prophet.
3} And lastly, my holster-style holder from Seidio also fits perfectly!
What he said......go for it, definately a worthy successor to the mighty JAM but better battery life, more buttons and with OMAP overclocker no performance issues.
Hi,
Does anybody know, or has anybody tested, the I-Mate JAMin (etc) in the THB Bury car cradle for the I-Mate JAM? The dimensions of the two devices are the same, and the USB, headphone socket, and external antenna connector all look to be in the same place.
Just wondering if anybody has tried this setup.
Cheers
Paul
THB Jam kit
It doesn't work out of the box. There are some grooves on top of the JAM that aren't on the JAMin and that's what the THB kit uses to retain the JAM. You may be able to adapt it. I'm using the THB Blueadapter and it works well, albeit without the external aerial connection.
I am using my THB Bury Jam cradle, and can confirm that it works fine.
Although it does not seem to engage the aerial connection as well as it did with the Jam, on my S200 the connection seems to be slightly higher, only possibly by half a mm.
You also need to use the additional self extracting file from THB to get the hands free.
Also the annoying echo is no longer there that I got with my Jam.
Hope this helps.
James
Interesting
I must have another look, unless there is a subtle difference between the JAMin and S200 cases. It certainly didn't seem to work that well in the shop, with the little bumps deforming the case. Thanks
Interesting
On my S200 the two little grabs on the THBury holder seem to sit nicely where the SD card recess is. Please see attached.
Cheers
James
This is a thread from a while back. Has anyone been using the Bury car cradle (on their website they show it as the MDA compact holder).
I'm still looking for a real (complete) carkit (not just a cradle with loading capability) and so far this is the only one I can find. I really don't want to combine a cradle with a BT speaker system.
Works with minor tweaks
I have the THB Uni8 cradle for the MDA compact running with my neo.
I only had to do some minor "dremeling" do not get my neo scratched when removing and mounting it again and agian. It is just a five minute job, even if you have two left hands like me.
Hi ppl, have external GPS and travel charger for Wallaby. They cable connects to the port on the bottom of the wallaby, since Im considering the buying of the 2020 maybe someone know is the connector on the bottom compatible so I can use those accessories on 2020 too ?
Tnx !
i could use my cradle from my wallaby with my himalaya without any problems it was a better cradle then the himalaya one anyway
to be sure you can take a look at wiki for pin out for the 2 devices
Thank you Rudegar, Stefan answsered on separate thread that everythings just fine, I can use GPS and charger.
thanks a lot & best regards !
Hi i'm new to this post so sorry if i ask a question wich was answered often. (yes i allready used the search engine) I'm also not an naturally english speaker (i'mgerman) so also sorry for my bad english.........
so after all these my question
i have several spare parts for an mda2 laying around here. And i now found a really good looking XDA 2i on ebay with a broken display. Does anybody know if the mda 2 and the xda2i have the same display connector.So i could take my tft from a mda2 and replace the broken one on the xda2i .i think i heard something that some types of this Pda have different ones. But i was not sure if it concerns the xda 2i.
thx for answering
hi, take care with that
sorry , but the XDA IIi connector is different from the mda 2
compatibility is : qtek 2020/ o2 xda II / Tmobile MDA II/HTC himalaya/orange spv m1000
Qtek 2020i / Dopod 699 / O2 Xda IIi / i-mate PDA2 / Orange SPV M1500 / Orange SPV M2500/HTC ALPiNE or Andes
take care. i may have a screen for sale, i m french, mail me on [email protected]
So display from Qtek 2020 and the o2 xdaII have the same display connector ?
Recently my QTek 2020 connector broke, and I bought a T-Mobile MDA II , but the motherboard and the screens where different
check out:
http://forum.xda-developers.com/showthread.php?t=220090
Jasjam, 8525, Dopod 838 Pro, Dopod CHT 9000, SPV M3100, MDA Vario II, XDA trion
Looking to buy the pcb behind the top front call/end call navigations buttons.
I bought a new JasJam shell(said it was compatible with the hermes) for my HTC Tytn but the layout of the buttons and pcb are wider than what can fit in the JasJam shell. I figured other phone pcbs are compatible just in a different form?..
Can someone sell me the need pcb or scarped phone for a fair price?