Related
simple enough i cant connect to my home wifi using my wizard.
It is able to find the network, and says it is "available" but when i press connect it goes ... "connecting" and then returns to "available"
Ive read through most threads on this forum and no one seems to have this problem, i have changed to power setting to best performance as well.
However i dont know what to put in the Enrole tab...? this is porbably the source of my problem.
please help me!
Hi, The problem could be the speed of your router connection. Set it to be able to connect to b end g clients.
In my case this worked. I Had the same problem you descibed, so give it a try!
Gert-Jan
thanks for the suggestion, but im running three computers over this wifi network already, and two have "g" wifi cards and one has a "b" card. so i dont think this is my problem.
jimmy_boy said:
thanks for the suggestion, but im running three computers over this wifi network already, and two have "g" wifi cards and one has a "b" card. so i dont think this is my problem.
Click to expand...
Click to collapse
My first problem was forgetting I'd got MAC filtering active on the AP. Once I'd added the Wizard's mac address things got better.
What encryption are you running?
Dox
Exact same problem as you jimmy_boy.
Quite frustrating not being able to connect to the wireless network.
I am wondering if it is a rom-specific problem...I am using an O2 XDA mini S, on vodafone. Would this cause the wifi to lock up?
Unsure as what to try next. If someone could shed some light on the situation it would be much appreciated.
Exact same problem as you jimmy_boy.
Quite frustrating not being able to connect to the wireless network.
I am wondering if it is a rom-specific problem...I am using an O2 XDA mini S, on vodafone. Would this cause the wifi to lock up?
Unsure as what to try next. If someone could shed some light on the situation it would be much appreciated.
gdap said:
I am wondering if it is a rom-specific problem...I am using an O2 XDA mini S, on vodafone. Would this cause the wifi to lock up?
Click to expand...
Click to collapse
Shouldn't do, I've got the same setup here and WiFi is fine.
gdap said:
Unsure as what to try next. If someone could shed some light on the situation it would be much appreciated.
Click to expand...
Click to collapse
If I have the power on anything but Best Performance, I get flakey throughput, even right on top of the AP. Both my laptop and iPAQ hx4700 will find the AP from all corners of the house, whereas the Wizards both want better signal strength before they'll connect.
Like I asked jimmy_boy, what encryption are you running?
Regards
Dox
I also experienced this problem and what I did to fix it was, changing the channel on my access point. I stepped through each channel stopping and trying it until I found a channel that worked.
I turned the encryption off. If I goto "Network adapters" it shows the name of my connection and "available", but when I goto "wireless lan" tab, it shows me no information on the connection at all.
Tried setting the power setting to max as well. Still nothing.
Would appreciate it, if someone could step by step explain how to do this.
thanks in advance.
I also have the exact same problem as described in the first post. I do have MAC filtering on, but I've also added the MAC of my Wizard.
I haven't tried changing the channel though...
yeah gdap thats exactly what i get, im running WEP encryption, but ive entered the network key into the wizard as well, i know this is correct, becasue i entered it in wrong on purpose to see if there is an error message and there is. So it knows the network key the network is available yet it stil wont connect!!!!!
Any ideas??
im running the uk t-mobile rom so i dont think its the roms problem.
changing the channel of all 4 computers ... oh the effort
but i might give it a shot
Same problem here
I can connect with my Exec, but not with my gf's Wizard. Same symptoms. It says the network is available if I get the key right, but then won't connect. Please help!
My Qtek 9100 can connect to my encrypted 802.11b AP, get's a valid IP address from the DHCP server, but is not able to communicate with TCP/IP. Also the other members of the wireless LAN can not see my Qtek nor is PING responding. PWLAN from Swisscom here in Switzerland is working well, the login page is showing up.
ch475
ch475 said:
My Qtek 9100 can connect to my encrypted 802.11b AP, get's a valid IP address from the DHCP server, but is not able to communicate with TCP/IP. Also the other members of the wireless LAN can not see my Qtek nor is PING responding. PWLAN from Swisscom here in Switzerland is working well, the login page is showing up.
ch475
Click to expand...
Click to collapse
I get the same issue: my 9100 connects to my router and receives a valid IP address. Even though the IP Address/Subnet Mask are valid, I cannot seem to get any access to the internet via wifi. I find this very frustrating, so if anyone has any suggestions, I'd appreciate it very much.
Exact same problem myself, but I think I only have my router set at 'G', where the o2 Mini is 'b' only.
Connected to both of my Morrisons supermarkets wireless network tho,they're both on 'b'........ no encryption in either of them.
problem solved!!!!!
stupidly i forgot to add the MAC address of my wizard :shock:
thanks for the help Dox
jimmy_boy said:
problem solved!!!!!
stupidly i forgot to add the MAC address of my wizard :shock:
thanks for the help Dox
Click to expand...
Click to collapse
Please explain
Check on the setup page on your router that MAC address filtering is not enabled. If it is you will need to add the MAC address of your Wizard's Wlan card in order to connect.
Often forgotten but excellent security feature is MAC address filtering
Sorted, as I thought, I had to set router to transmi b as well as g
No need to flash the Rom now :twisted:
SantfeKuss said:
jimmy_boy said:
problem solved!!!!!
stupidly i forgot to add the MAC address of my wizard :shock:
thanks for the help Dox
Click to expand...
Click to collapse
Please explain
Click to expand...
Click to collapse
On your wifi router settings on your computer, you have to add the MAC address of the wizard, which can be found by , settings, advanced tab on your wizard.
I just moved into this new place, just got the Cox Cable internet installed yesterday, picked up a new "Belkin N Wireless Router" model # F5D8233-4. Works fine with the laptop- I've had it setup using unsecured, WEP, & WPA/WPA2 Personal. No problems on the laptop. Inexpensive Dell Inspiron with Vista Home Basic.
However, the Wing will not cooperate at all. It only wants to connect to unsecured networks. It will connect to mine and others it detects in the appt complex. But as soon as any type of security is enabled it just tries to connect for a few seconds, then the network becomes unavailable. I'm soo tired of clicking around in the Wing with this stylus, I'm about to throw it out the window.
I've set up a static IP on the laptop so to better work with port forwarding & Azureus. Will this have an effect on what I'm trying to do? I can't see how it would, but I'm no expert.....
So here's what I've done. In the routers setup page, I've selected 64bit wep, typed in a passkey and hit generate. Wrote down the 4 keys it generated, saved the changes and exited the router setup. I think where I'm messing up is what I should be doing next with the Wing. Can anyone walk me through this?
About the only thing of note that I've done to the Wing as far as tweaking is concerned is to install Home Screen/Battery Status, overclocked to 260, and tweaked the registry to allow ring tones from the sd card.
HELP!!
maybe your wing uses the same ports as the ones you've forwarded to connect to your router. You should always make it really obscure (something like 65530-65534) to make sure that there are no conflicts between other apps and any port related protections your ISP may have implemented.
You are setting up your wing with the key, right? It might just be that the wing is incompatible with 64bit wep.
Let me clarify- the port forwarding was set up for the Azureus bit torrent client. Way obscure ports-in the 49,xxx-50,xxx range.
Yeah, setting up the wing with the key. The only choices are 64 and 128bit wep. And the WPA/PSK. Neither work. When the little window pops up asking for the net work key, I enter one of the ones I wrote down. The thing doesn't seem to be compatible with any type of security. Which kinda sucks....To use the wi-fi at home, I have to leave my router open to "signal thieves".
thats funny, actually.
I have my linksys wrt54g set to 64 bit 10 hex security and it works just fine. Maybe your problem has something to do with the wireless n part of your router? The wing is not compatible with draft-n. Does your router also broadcast with wireless-g or b?
It does...I just switched it over. Waiting for the Wing to reboot then I'll try again. Good thinking.
Ok, that didn't work either. The selections in the router are
1- Off
2- 802.11g,
3- 802.11g, 802.11b, 802.11n
4- 802.11n
It was on #3, I changed to #2 and no luck. Grrr...
Have a look on your wireless lan power settings, my Wing also had huge wifi problems all fixed when I changed the power to better performance.
I think I found a thread that mentioned that while researching this problem. Anyways, I've already made that change.
Which network adapter is the wi-fi one? Is it this- "SDIO WLAN Wireless Adapter"?
oh by the way just remembered something from my noob years.
make sure that your wing's adapter connects to "the internet" not "work"
fzzyrn said:
oh by the way just remembered something from my noob years.
make sure that your wing's adapter connects to "the internet" not "work"
Click to expand...
Click to collapse
lol, Already made sure of that. Thanks tho.
I've had the exact same issue with my MDA and originally with my Wing. It works fine now, I'm not sure why.
I just flashed to Open Touch 6.5. Still a no-go.
ok am new with this i got the tmobile wing and with the wifi i can use the internet right so that means that if i don't have a data plan i can still use the internet without getting charge for data can someone explained to me the wifi issued thanks i don't want to use the internet and later get a big bill cause i don't have data plan on my phone thanks...
so what's the wifi on the wing for???
ghostnj said:
ok am new with this i got the tmobile wing and with the wifi i can use the internet right so that means that if i don't have a data plan i can still use the internet without getting charge for data can someone explained to me the wifi issued thanks i don't want to use the internet and later get a big bill cause i don't have data plan on my phone thanks...
so what's the wifi on the wing for???
Click to expand...
Click to collapse
The wifi is just like a laptop's wifi, it connects to a wireless router and since it's not going through the cell phone towers, it will not charge you.
ivanmmj said:
The wifi is just like a laptop's wifi, it connects to a wireless router and since it's not going through the cell phone towers, it will not charge you.
Click to expand...
Click to collapse
ok thank you very much
OMG....I'm getting soooooooooooooo tired of dickin around with this thing. Now it won't connect to any network, secured or not.
I tried importing a certificate from IE on my laptop, because I got an error message on the wing saying the net work needed a personal certificate to identify me. Didn't work.
I tried a hard rest. Didn't work.
I've tried about 56,345 soft resets. Didn't work.
If there were any trees in the state of Kansas, I'd go bang my head on one of them. :
KidJethro said:
OMG....I'm getting soooooooooooooo tired of dickin around with this thing. Now it won't connect to any network, secured or not.
I tried importing a certificate from IE on my laptop, because I got an error message on the wing saying the net work needed a personal certificate to identify me. Didn't work.
I tried a hard rest. Didn't work.
I've tried about 56,345 soft resets. Didn't work.
If there were any trees in the state of Kansas, I'd go bang my head on one of them. :
Click to expand...
Click to collapse
It works fine with my current ROM. (JustMe by... Me. lol)
I'm pretty sure it's not a ROM issue...I just flashed this thing late last night. It started not connecting to anything late afternoon yesterday, while the stock T-Mobile ROM was installed.
The stock ROM never worked properly for me...
Try another ROM.
Hello all,
I love my X10, but the frustration with getting it to connect to my Netgear DG834 router was getting to me, so I dedicated an afternoon to working out a solution and I've found one that works for me, so I hope it'll work for you too.
Summary of problem
--------------------
The phone will connect to the Router once, and once only. Any attempt to re-connect to the wifi will result in the phone disconnecting, scanning again, then discinnecting until the user gives up. Nothing will cause the phone to reconnect (telling it to forget the connection for example). The only surefire way to reconnect is to reboot the router each time - not ideal.
Manually adding a Static IP also doesn't work - which is weird as that is how I've solved it, see below.
Scale of problem
----------------
The problem seems to be with the router and not necessarily the phone as it appears to be on a wide range of phones (Hero, Droid, Touch HD etc.). Seeing at the DG834 is the most popular router in the world, and Android is growing all the time, there are a large number of people affected.
However Iphone and Symbian phones appear to be unaffected.
Reason for the problem
-----------------------
Currently unknown, but appears to be something to do with the handshaking procedure when a device asks the router for an address (DHCP) - though as to what I don't know.
Solution
--------
1) Download an app called WiFiStatic from the App Market. WiFiStatic takes each DHCP assigned IP address and stores it in a small database to be re-applied whenever you are back in range of the same Router again. It is not an ideal solution as you may have to re-scan and re-assign if you visit a busy hotspot, but this is a two press function, so it's not that onerous.
2) Turn off your Router. Make sure the WiFi on your phone is off too.
3) With the router off, clear your Remembered WiFi connections (or at the very least the Netgear connection). Once that's done, turn the Router on again and wait until it is full back up again.
4) When the Router is fully operational again, turn on your wifi on the phone and let is scan for and connect to the Netgear Router. You may need to tell it to connect from the Wireless Settings menu on the phone.
5) The phone should now connect to the Router successfully. If it doesn't, repeat the above procedure.
6) With the phone connected to the router, fire up WiFiStatic. Check Auto Switch and Show Visual Prompt if they are not already selected, then Tap Add configuration at the bottom of the screen.
7) The IP address and other settings assigned by your router should be displayed at the top of the screen, at the bottom should be the name of your router and its MAC address. If not then tap Menu > Generate to populate the form.
8)Tap Menu > Done when everything is ok.
That's it. Now when you move into range of your Netgear, you should get connected, though it does take a bit longer than normal (the Router still wants to assign an address first before accepting the static IP). You can speed this up by changing the Device table on the router to always keep the Phone's static IP open.
This shouldn't work as all my other attempts with Static IP failed, but I've had five days now of instant connection to WiFi at home, so something has been freed up.
i can not tell you how seeing this post was like finding bin ladin in the white house. Prob would have found him twice trying to solve this WIFI problem. And the strange thing is this is the 1st phone i have had that there are so few posts about it...is everyone on that icrack? scary. cheers to you...
Thank you for posting this.
I tried this with my and it seems it doesn't make a difference for me. I still can only connect once to the router and for me to connect again i have to restart the router again. Am i missing something?
Problem is when I connect for the first time at home it works then when i leave to the office i use the wifi there and never have any problems there but when i get back home it doesn't work. Do you guys switch the wifi off manually when you are not using it?
one thing that is almost always overlooked is updating the router's firmware. this usually solves a number of issues. I dont know about netgear but it's worth a try to update
bimmerboii said:
one thing that is almost always overlooked is updating the router's firmware. this usually solves a number of issues. I dont know about netgear but it's worth a try to update
Click to expand...
Click to collapse
That was one of the first thing i tried....it seems i have the latest firmware.
Is this an issue for a lot of people then? Ive one of these routers and never had an issue connecting any phones to it. Had 3 nokias and 3 different android phones, currently on the x10, and they all connected fine everytime.
i have some troubles in x10i wifi connection and holp someone helps me~
------------------------------
im chinese, my x10i have had the lastest firmware but the phone cant connect the AP which set the channel is "13". but i used it long before and suddy just one day i find it dosnt work~ it cant scan(and find) the AP anymore !
then i have tried and config the router in another wifi channel(just like 1,8,11..) and the phone can scan and refind the AP.
i have tried to reload the phone's default setting,but it dont work(in channel 13)ToT
---------------------------
someone tell me why? and someone give me some suggest?
in china , lots of router's wifi channel are using "13" by default(factory setting);so, if my x10i cant works in that channel means i couldnt find the "opend APs" which in the public place(like KFC~~)
THX to help~
StampedChipmunk said:
Hello all,
I love my X10, but the frustration with getting it to connect to my Netgear DG834 router was getting to me, so I dedicated an afternoon to working out a solution and I've found one that works for me, so I hope it'll work for you too.
<snip>.
Click to expand...
Click to collapse
Thank you! I have spent three days trying to get my phone to re-connect to a DG834v5.
Your solution has worked! I had gone as far as reserving an IP address on the router and linked it to the MAC of the phone... no dice. The phone would connect once and then never again until the router was reset. Really irritating because I have two PPPoe connections running through the router with a routing table that has to be re-loaded via telnet every time the router is reset. I was considering a new phone or a new router.
HI,
I have near the same problem.
But I found out that when I remove on the access point the hidden function ( SID ) then it works perfect.
so that is a bug in the ROM of the X10, I have the R2b026.
At the moment everone can see my Access Point but I can live with that solution.
Worked for me! Many many thanks this had been infuriating me...
Same problem here - never had an issue with any other router, so I blame Netgear...
Let's just hope this works - it's been driving me crazy for the past 5 days...
Neh, hasn't worked for me....
Stupid freakin' Netgear...
works on the HD2 aswell. Thanks alot!
Not just Netgear, maybe Android
k1sr said:
Same problem here - never had an issue with any other router, so I blame Netgear...
Let's just hope this works - it's been driving me crazy for the past 5 days...
Click to expand...
Click to collapse
I am having the same issue on my HD2 Android 2.3.4, connecting to a D-Link DIR-635. If I use Static IP, everything is fine...
WORKS! I can't believe it, finally i can disconnect and connect without having to reset my router everytime. BIG thanks man!
alright, it worked fine for the first 5-6 hours. then it went back to not connecting without rebooting the router. this problem happens only with my home router, at work i can connect fine, as well as in other places.
any thoughts or solutions? i mean it did work in the beginning, then why did it stop? shall i change my router?
P.S.: i noticed that every time i connect to my home router i get the same IP address and all the stats are the same.
I just bought a Rogers arc and everything is great so far, except the wifi. For whatever reason when i try to connect to my home network, although it recognizes it and connects i get a "limited connectivity" which effectively does not allow me to use wifi at all. ive tryed rebooting the phone and reseting my router (which is a D-link DI-524.) any help would be appreciated.
you could go in the router settings and register the phones mac address to a ip of your choice. it should do the trick i think...
I finally figured out what the problem was, i had to update the firmware on the router and then manually add the MAC address like dogggie said and after a reboot voila!
I don't want to make another thread since my problem is similar to this one. So in my school there is a hiden Wi-FI network and it has got a password, but we know Name and Password, so we can connect to Wi-Fi. But here is the thing: My friend who has SGS2 connect's without any problems, but everytime I try to connect to Wi-FI i get "Limited Connectivity" mesage. Is there any way to fix this? Can I somehow get Gateway and Netmask from router, so I can set static IP on my phone or sometheing like that?
Thanks for answers.
SEK610i said:
I don't want to make another thread since my problem is similar to this one. So in my school there is a hiden Wi-FI network and it has got a password, but we know Name and Password, so we can connect to Wi-Fi. But here is the thing: My friend who has SGS2 connect's without any problems, but everytime I try to connect to Wi-FI i get "Limited Connectivity" mesage. Is there any way to fix this? Can I somehow get Gateway and Netmask from router, so I can set static IP on my phone or sometheing like that?
Thanks for answers.
Click to expand...
Click to collapse
Zanimivo, na kero šolo hodš?
I have the same problem. Hidden Wi-Fi in school, limited connectivity. Works for some people, doesn't for most.
I have used CM7 for some time and the Wi-Fi worked with it, but I flashed the stock ROM back and now, again, it doesn't work.
Oo, another one form Slovenia Lep pozdrav. Šola je pa TŠC Kranj.
It also worked for me when I was testing Offical Beta ICS, but now I am back on stock 2.3.4 and all I can get is limited conectivity
tsckr
tehniskikranj
Same school.
Today it works. I have just manual set gateway, DNS servers, netmask and my own IP.
Cool. Mind sharing the values you used?
i got my new omnia 7 today and i can't connect to my home wifi router. i tried to disable security, tried wep.....but it allways says "couldn't reach wifi network" or "password incorect". i tried to reset my router and my omnia 7, but nothing helped.
thanks in advance!
today, i connected just fine on one open ap, and one wep protected ap, but i still can't connect to my home wi fi ap. really confusing. my laptop and old htc prophet connects just fine, but my new omnia 7 won't. any advice?
thanks!
ok, so since no one tried to help me here, i tried every single thing on my router and it seems that the phone can't handle b+g standards, so i switched to g allone and now i'm able to connect. i hope this will help someone else too.
Nice tip
Hey man,i guess no one had the problem or didnt know what to do,anyway i had a differrent problem,when i was close to my router (no more than 8 meters) my phone connected normaly to the wifi,but once i was in my room which is further away from the router the phone wouldnt connect although it showed the wifi router signal had two bars,i tried your method in switching to g only and it worked ,now i connect to my wifi with no problem,thx for the tip ,hope they fix the issue in mango,cheers.
phobius87 said:
ok, so since no one tried to help me here, i tried every single thing on my router and it seems that the phone can't handle b+g standards, so i switched to g allone and now i'm able to connect. i hope this will help someone else too.
Click to expand...
Click to collapse
I have the same problem with my wifi router.
My phone is HTC 7 Throphy.
I have to reset my router every time my phone needs to connect to it.
My router is configured for DHCP.
I noticed that if there is a wireless device connected to my wifi network,
my phone gives that error and cannot connect.
If I try to connect to a wifi network which is secured with a password,
I always get 'Incorrect password' message.
I try reseting my phone with no effect.
I'm still looking for a solution.
Same prob here....
princegoro said:
Hey man,i guess no one had the problem or didnt know what to do,anyway i had a differrent problem,when i was close to my router (no more than 8 meters) my phone connected normaly to the wifi,but once i was in my room which is further away from the router the phone wouldnt connect although it showed the wifi router signal had two bars,i tried your method in switching to g only and it worked ,now i connect to my wifi with no problem,thx for the tip ,hope they fix the issue in mango,cheers.
Click to expand...
Click to collapse
no problem man.
it seems that there are many troubles with wifi on windows phone 7 and many users are complaining. i hope too that mango will fix most of those issues. mango will bring possibility to connect to hidden network.
for other users posting on this topic, i suggest that they try switching to g standard only, becose i too had this incorect password message allways poping up before the switching. it can be done in the router web configuration interface. u get in usualiy by typing 192.168.1.1 in your adress bar.
phobius87 said:
no problem man.
it seems that there are many troubles with wifi on windows phone 7 and many users are complaining. i hope too that mango will fix most of those issues. mango will bring possibility to connect to hidden network.
for other users posting on this topic, i suggest that they try switching to g standard only, becose i too had this incorect password message allways poping up before the switching. it can be done in the router web configuration interface. u get in usualiy by typing 192.168.1.1 in your adress bar.
Click to expand...
Click to collapse
My router is on g standart only but I still get that error.
well, if you know what you'r doing, you could try different configurations in your router. play with the settings and see if it will work, but again, only if you'r sure you won't screw up anything.
I found a fix.
In my router settings I changed the Chanel from 6 to 10.
I think the problem is that I have too many wireless devices in a small room.
you lucky bastards with wifi connectivity.. i have a pppoe account on my wifi and there is no way for me to connect to it whatsoever.
if you have access to your router settings, you can change briged to routed connection.
for some reason, i can't access router! i tried contacting my ISP, did not want to die waiting for an answer.
but i remember trying to do that before, and not knowing how.
Could you post a link with the instructions, zemljak?
you have a pm.
phobius87 said:
you have a pm.
Click to expand...
Click to collapse
i dont know if you are receiving my pm's, i dont see it them in sent.
I have this intermittent connection on a netgear wireless router too, its set to use dhcp, and only fix is a reboot of the router.
I think the phone is storing an ip (dhcp assigned) which when you reconnect to your wifi may have been re-assigned (ip lease) to a.n.other device in the meantime.
So, lets say on Monday I obtained 192.168.0.2
didnt access the wifi for a day or so
lease expires (router)
a.n.other device connects, e.g. iPad, obtained 192.168.0.2 via dhcp
then you try and use your wifi on your phone and it doesnt connect.....
so I think it might be storing the ip address, rather than checking for a new one each time it connects, or something similar.
Over a half year I had the same problem. But now I fixed it, by simply change the wlan-key, because in my old key I had letters like ä, ö, ü. That didn´t work. May be this works for you.
FIX!
tchimev said:
I found a fix.
In my router settings I changed the Chanel from 6 to 10.
I think the problem is that I have too many wireless devices in a small room.
Click to expand...
Click to collapse
I started having the same problem with the phone prompting me that i had the incorrect password. I changed the channel in my router and now my Surround is connecting without hessitation! Thanks!
Hi,
I have Nokia Lumia 800 with Windows Phone 7.5 and also have problems with my home wifi connection. Firstly I had an old pentagram router and couldn't to connect with it, I tried WPA, WPA 2, WEP, WPA 2 mixed or even no security, always had the same problem, shows "network don't respond".
The phone itself connects to other networks, but not my home network.
I thought that it was problem with my router (but every other device had no problems with conenction, ipad, galaxy s, laptops or even TV), so I took another router (techniklab) and I have the same problem.
On both routers in "active clients" I saw the phone when it was trying to connect, logs looks like:
Code:
Aug 20 22:13:31 wlan0: WPA2-AES PSK authentication in progress...
Aug 20 22:13:31 wlan0: A wireless client is associated - 50:2D:1D:E2:8A:87
Aug 20 22:13:31 wlan0: Open and authenticated
Aug 20 22:13:53 wlan0: A wireless client is disassociated - 50:2D:1D:E2:8A:87
Windows on my phone is up to date, router firmware also.
I can add that from couple of days I have Windows 8 (on PC) and it also cannot connect to my router, could it be some problems in new microsoft windows??
Any suggestions?