Hi folks,
I'm aware of the registry hack to change the RingTone settings (such as vibrate length, etc), but can this be done for the notification alert? When I get a notification the phone just vibrates for too long.
Any help appreciated.
PaulB
Hi,
Any help on this would be most appreciated, as the vibrate just goes on too long, and not only annoys me but everyone in my (quiet) office!
You can set the vibrate length in seconds for RingTone0 in the registry so there must be an equivalent for the notification alert?
PaulB
i second this request, the whole scripting thing for ringtone0 is simple but bizarre especially as there seems to be no equivalent settings for text/email notifications. There must be a way!
Change duration of notification vibration (hey I'm a poet!)
Sorry to bump this again, but as some time has passed I wondered if anyone had managed to find the reg settings for the notification alert?
I really need to shorten the vibration duration for notifications.
I second this, the message alert is way to long. Hope someone have a sollution to this.
Jarle
Fix for long vibration
I recently switched from the Sidekick 3 (I had the sidekick 1, sidekick 1 color, and sidekick 2 as well) to the 8525/TyTN and immediately found this vibration issue described above extremely annoying. The sidekick uses the sound file normally played to generate the vibration pattern, meaning if the sound file has two large amplitude alerts 1 second apart, if the phone is in vibrate mode, it would vibrate twice, with a 1 second spacing.... along with "the beat" of the audio.
Anyways, I discovered today that Windows Mobile does this as well to some extent. If the phone is set to vibrate mode, then it seems that all notifications vibrate as the long, 5 second or so, vibrate that you're all familiar with. HOWEVER, if the notification is set to vibrate and sound acoustically, it vibrates for the duration of the sound file. Strangely, this does not work when the phone is set to only vibrate. To get around this, what you need to do is set your notification (text message, e-mail, whatever) to both play a short sound and vibrate, then set your phone's audio to be on, but then turn the volume all the way down. In this setting, the phone does not play a sound, but does vibrate according to the length of the audio file.
I haven't tested this extensively, but it seems to work so far. This actually was one of my biggest complaints about the phone and i'm very glad i've found a simple work-around.
Let me know your experiences and/or if it doesn't work for you,
Todd
quite a great idea there, but was hoping someone has figured out a better solution?
what about going one step further with this and make a short wav file of pulsed noise, but at 20kHz. you won't here it!
All,
I have just joined this board searching for a solution to EXACTLY this problem. What is required please is a registry tweak that shortens the vibration alert for text messages, etc, when the phone is set ot vibrate only.
The ringtone fix to shorten the vibration alert works when a call comes in but NOT when a message comes in.
Any help on this would be very much appreciated.
Thanks
WB
Oh wow. I have the same annoyance with my phone. You send a text on vibrate and it goes nuts for an hour! Not really that long, but for just a text message notification it should be a little 1 second bitz.
This long vibration is really bad when you are in class and it goes for so long. My phone hits right against those plastic chairs through my pocket and resonates though out the whole room.
Unfortunately the Notification registry entries don't have a script option.
If you go into
HKEY_CURRENT_USER\ControlPanel\Notifications
the Default String tells you what the each directory is for.
The other keys are
AvailableOptions - What options you can pick from in the Sound/Notifactions screen in settings,
Duration - the length of time the light flashes (5,10,15,20,30,45,60min, 0=no limit)
Options - what sort of notifications you want
1=play sound
2=vibrate
3=play sound, vibrate
4=flash light
5=play sound, flash light
6=flash light, vibrate
7=play sound, flash for, vibrate
8=nothing
9=play sound, display message
10=nothing (can only pick play sound and vibrate)
11=play sound, display message, vibrate
12=Display message, Flash light
13=play sound, display message, flash light
14=display message, flash light, vibrate
15=play sound, display message, flash light, vibrate
senergy said:
Unfortunately the Notification registry entries don't have a script option.
Click to expand...
Click to collapse
So what you are saying is there is no way of making the vibration shorter? No way at all? Could you add an option for time? Is there some program?
Senergy,
Many thanks for your response. Disappointing news as this is a serious nuisance.
I have lost count of the number of times I have been in meetings where the phone has gone off in vibrate mode only for the whole world to know I have had a message. Many a time I simply turn all alerts off which defeats the objective of having a discrete vibrate system.
I rang HTC's support team in the UK and got nowhere.
I wonder if a written query into them might get a more productive response?
WB
Anyone heard of any solutions yet? I've been searching google, forums, etc for days with no luck yet.
DRChrysler,
No but see thread link below. Shantz may yet be able to help us out here.
Cheers
WB
http://forum.xda-developers.com/showthread.php?t=311838
I had the same issue when I had a Tytn II last year.
My issue is that when the phone rings while in normal mode, it is one constant vibration, which I dont like.
Also when i receive a text message in normal mode, the vibration is constant and lasts for about 4 seconds.
BUT
when the phone is in vibrate mode, the vibration for calls is a on/off vibration which I like, and for texts is 3 sharp vibrations which is a lot more useful in distinguishing whether it is a phone call or text that i am receiving when the phone is in my pocket.
Is there anything I can do to make the HD behave the way it does in vibrate mode for all calls?
There must be some sort of registry setting that can be tweaked.
Thanks in advance for any replies..
anyone?
Try this, It could be what your looking for.
http://forum.xda-developers.com/showthread.php?t=437279&highlight=Valert
Would also be interested.
i remember back in the day, my Nokia 6310i (yeah not even color phone) would vibrate to the ring tone.
valert is cool, but on the HD has a bug that disables volume keys
I've installed VAlert but cant find it anywhere?
Try the attached utility. It's conf is under system settings.
nezz, the app has cyrillic interface: any chance to have it in latin (or at least a translation of what the 3 checkboxes mean?)
thanks
Is there a reg tweak for this? When you turn the phone on it does 2 short vibrations. i would like to use this as the sms vibrate alert. Is that possible?
Thanks!
Thanks for taking the time to read this..
Just wondering if there is anything I can run or enable on my ORANGE branded Touch 3G to show that I have calls diverted..
I very often have to divert to my works phone during the day time and sometimes forget if it is still diverted.. My other phone (works Sony Ericsson) has a symbol which stays at the top of the screen when divert is set..
Any idea's... Thoughts etc...
Thanks Phil
not sure if i got u right, as i am not sure if you and i do understand the word diverted the same way...
but if you ask for an indicator for missed calls, you can adjust the length of blinking for missed calls (start - settings - "sounds and announcements" (i got the german rom).
there you go to announcements and then you change the blinking setting for missed calls to "allways" or "not ending".
I set my phone to send any incoming calls to my other phone (divert).
Actually the network does the diverting but on my other phone (SE K850i) a symbol is shown on the screen. All my previous makes off phone have done similar and I could do with the HTC doing the same..
Thanks....
Phil
If you mean this function or something similar to this:
"Ignore all: This mode rejects all incoming calls and goes straight to voicemail. The phone will stay on only for data access. The rejected calls will be added to the call history log and the standard missed call notification will appear on the Today screen."
This is only possible with additional software (afaik), for example this one:
http://www.spbsoftwarehouse.com/pocketpc-software/phonesuite/
(Free 14 days trial). I use it an it is very good, imo.
It ist not possible to see an provider-call diversion (= forwarding) on your handset (afaik).
The last line actually answers my question totally...
Thanks again for replying.. Phil
I want to buy an Omnia 7, but I think I will miss a notification LED for incoming SMS and missed calls.
Is there an app available?
Not sure how an app will replace an led. What do you mean?
the device has lights right and left of the windows logo.
Right now theres nothing like it. If there was that would be a homebrew solution.
Something new here?
You need a LED?
I have an omnia 7 and it works great, never missed calls or texts except when my phone was muted in my pocket. But you will recognize calls and all notifications, your mobile will make a sound, the display will turn on if its not in your pocket or something like that. And you will see little icons on the lockscreen that show you the number of mails, phone calls and texts..
Hi, I thought Sidelight would do the trick, and it works great, EXCEPT for the fact that it only alerts once and then stops. Often I'm out of the work vehicle and I won't see that notification alert and will end up not knowing anything came through.
Is there an alternative option for this phone that will simply give a recurring visual alert on the screen for calls and texts that I've missed?