Hi,
OK .. I admit I have played with installing a few software to try yesterday night and there were fine but this morning when making a call-out I noticed that my Phone screen is not displayed.
It's just blank.
But when I click on the digits (where I usually see a phone keypad) these are pressed and the number is displayed on the top of the screen, but still not the Key I pressed.
I have already uninstall the soft I tried and soft-reseted but it didn't fix anything.
The soft I played with were:
- PhoneAlarm*
- SPB Pocket Plus
- Webaroo
I kind-of-think it was due to PhoneAlarm skins since I installed and ran a VGA skin by mistake which may have corrupted some screen images (like Phone).
Any idea ? Has anyone had the same before ?
I remember I had lost part of the Phone keys a few months ago when I tried to install a Phone skin thatwas supposed t replace the keys, when uninstalling it the default keys did not come back (and I had to hard-rest :-( )
If you know of a decent Phone Keypad skin then I could install it and it will replace my phone keys then ... (alternatevely)
Thanks so much for your fast assistance,
F.
Related
Yhea! i'm here for the second time asking something about the digitizer. Now the problem is:
I've the digitizer disconnected and i've experienced (last time) that part of the front buttons don't work. Not important.. they're well replicated except for the red phone but it's another problem. I've jet ordered and payed a new digitizer and i'm waiting for it. The real problem is that now i can't use my phone because ita was going all well (without buttons) but modifying the start plugin by the schap's registry editor my vpa freeze on the splash screen. I've made a hard-reset and (as indicated somewhere) with the pone stopped on the screen "tap enywhere to start your wm bla bla bla" i've connected it via usb and deleted the link "c:\windows\autostart\welcome.ink" or something similar. I've bypassed the welcome procedure but now after boot my wm freeze with a strange screen situation.. i can see the top bar but the rest of the screen is occuped by the splash screen.. like it'is without screen refresh.
Is it possible that the welcome.exe adding useful information to registry that let the phone working well? May I insert them by hand with an editor launched on my pc with the pda connected? or my tytn is definitively gone?
The phone does not respond to any button except the power button (for standby and power off with the message window fully represented) and the button on the left that (if hold) start the recording note software as shap's default.
Tell me what you think and thank you!
Gianmarco
Hi all,
Like many people's, my Hermes (T-Mobile Vario II) suffers from screen misalignment issue, and needs re-aligning almost daily. I've done all the mods but to no avail. It is out of warranty so I can't send it back.
Recently, when I try to align the screen (by pressing Confirm button + Message button, or by going to Settings > System > Screen), it just hangs in the "Align Screen" screen - it does not respond when I tap on the target cross.
Only a soft reset can take me out of the screen.
I am using Schap's January 2008 version.
Any idea why please?
But screen now is misaligned really badly and I can't re-align it...
Thanks.
EDIT:
But it doesn't happen every time. Very occasionally it would work...
wywywywy said:
Hi all,
Like many people's, my Hermes (T-Mobile Vario II) suffers from screen misalignment issue, and needs re-aligning almost daily. I've done all the mods but to no avail. It is out of warranty so I can't send it back.
Recently, when I try to align the screen (by pressing Confirm button + Message button, or by going to Settings > System > Screen), it just hangs in the "Align Screen" screen - it does not respond when I tap on the target cross.
Only a soft reset can take me out of the screen.
I am using Schap's January 2008 version.
Any idea why please?
But screen now is misaligned really badly and I can't re-align it...
Thanks.
EDIT:
But it doesn't happen every time. Very occasionally it would work...
Click to expand...
Click to collapse
Answer is easy... Schaps roms have "Ftouchflo" installed. It is nearly sure it is activated on your phone. In this case, the alignment utility is NOT usable. And the pda can stay with a non reactive touch screen till next reset.
Desactivate touchflo by using the touchflo configuration tool followed by a soft reset. So you will be able to use screen alignment.
Just tried and yes! Thats it!
Thanks a lot matey!
You are welcome
Perhaps this should have it's own thread but it is very similar.
My tytn (WM6) has suddenly developed a strange problem. When I go to align the screen, the crosses appear as normal and when I point to them, it appears to be working. Except... After pointing to the last cross, the whole thing starts again, and this happens continuously!
This started when I applied a screen protector and tried to align the screen through it. It was working fine before then. I have taken the screen protector off again, but there is no change.
As I've spent the whole day installing cab files and getting it as I like it, syncing etc. too, I really don't want to have to hard reset it again.
Any other ideas?
That usually means more than 1 point is touching the screen.
That's what I thought but I've cleaned the screen and done the business card trick all round the edges. I can't see where it could be touching...
Any other ideas or suggestions that may help?
I couldn't find a touchflo "disable" button anywhere on my Hermes, but I did go into "Remove Programs" and uninstalled the HTC Cube application, then did a stylus soft reset, then aligned the screen with no problem.
Hi,
i bought the X1 several days back and now i have this annoying issue with my touch screen stopping to work at random times. it usually happens right after i had unlocked the keyboard and screen, and only a restart fixes it.
some specs:
- i have put my left hardkey as keyboard lock button
- i have SpB mobile shell installed and working just fine
- i have calendar sync with Outlook
- my Now screen is the default visible screen when the keys are locked
the funny thing is that i unlock the keys through the touch screen (left softkey and then right softkey) and afterwards it is just as good as locked as well. it doesnt occur after any specific action as far as i have observed so far, it just happens every say 20-25 locks/unlocks. neither browisng through menus (using the hard keys) nor sliding the phone in and out, nor locking and unlocking again fixes this.
does someone have a similar problem or any idea for solution to this?
thanks,
Ivaylo
Me too
I have the same problem and i also have SpB mobile shell installed.
The touch screen on a friend of mine's MDA stopped working in the middle and had lost it's alignment making the device hard to use. So I picked up an oem LCD assembly and replaced it. Now no matter how many times I try to align the screen it just keeps cycling. It responds to the taps and goes full cycle but just goes back to the begining. I have search everwhere to find a solution. I have done it in portrait and landscape I have hard reset it and upgraded the rom but still have the same problem. Any Ideas?
Did you try the way yet where you must put a dummy file named welcome.??? (cant recall the extension) in the root of youre phone?
EDIT: make a textfile and make sure extensions are visible and renamle the WHOLE name (including .txt) to welcome.not in the root of youre phone, then restart it and normally voila
I was able to get past the alignment screen but am unable to align it. It just keeps cycling as I press the markers. The touch screen is way out of alignment.
i d that before and i did a hard reset.
in my rom came de alignment after a soft reset so deleted it with startup manager
I was able to get past the screen by deleting the welcome.lnk with pocket controller. My beggest problem is that I can't calibrate the screen in order to make the touch screen usable. I do not know what the problem is. The screen responds when I touch the marker and goes through the cycle but never stops. I have tried going through it as much as 30 times portrait and landscape and it will not accept the alignment.
I experienced something strange with my Qtek 9100 today. when i turned on my phone, all the keys including the call and the 'hang up'-button where backlighted. the keys did not respond as they should, and pressing the d-pad center would either open the start menu or initialize the screen calibration. if i opened the Notes app and created a new note, the note was filled with single letters like the L, the H or the Y. none of the keys seemed to be working when i pressed them.
i've experienced this once before, and the only thing in common is that i had my phone in a thight pocket for several hours. last thime i solved the problem by hibernate the unit and pressing all the keys, and turn it on again. this time it wasn't that easy, but i managed to get it working again at last.
but why is this happending?
PS: i've tried soft reset and taking out the battery, and that didn't help.
Please help me and my phone