Although I tend to use my Jasjar mostly in its native landscape mode, Some programs are still written to operate only in portrait mode. So we have to switch between to two orientations. Yes, the little icon on the bottom right of the today screen will rotate the screen - from Landscape to Portrait (PDA) mode, then from Portrait to INVERTED Landscape mode, then another click to get it back the right way up. I know it is just one more click but it tends to irritate me and I am looking for a way to just switch it to and from the two modes I want.
I can map one of the buttons to the standard <Rotate Screen> option in Settings->Buttons, but that rotates only between Portrait and INVERTED Landscape modes! It will not bring the screen back the right way up.
Maybe there is a registry modification to fix that?
Or, can someone please tell me if there is some software or other way to make the screen switching work the way one would expect on the Universal?
I know SPB Pocket Plus can do it with its <Rotate Landscape Left> option but I don't need PocketPlus for anything else so it seems wasteful to have it installed just to rotate the screen.
I expected this to be a rather common problem but searching through this Universal forum, I could not find an answer or even any discussion on this issue. Am I the only one who thnks this way?
Check out phm keys. I posted a link to it on my website today.
V
Thanks V, but I can't see any link on your Web Page. Never mind, I searched and found the PHM.lu site and downloaded the msi file from there. But I am not sure if it supports WM5? When I run the msi on the desktop it goes through the motions but nothing appears on the Jasjar. Usually it tells me something is being installed and asks whether it is to go to the SD card or main memory. But nothing happens! Tried it twice. Maybe PHM Keys is not supported on WM5?
My pocket IE closes on its own from time to time. Has anybody else had this problem? I can't isolate the cause, but it seems to happen whenever I'm scrolling using the bar on the right, or when I try to scroll while pages are still loading. It doesn't happen consistently so I can't say for sure. I tried searching Hermes_Problems, wiki, and searched forums but couldn't find a relevant thread.
I have seen this happen if you have your temp. files and cookies, etc. set to your storage card.
Try changing that and see what happens
acturater said:
My pocket IE closes on its own from time to time. Has anybody else had this problem? I can't isolate the cause, but it seems to happen whenever I'm scrolling using the bar on the right, or when I try to scroll while pages are still loading. It doesn't happen consistently so I can't say for sure. I tried searching Hermes_Problems, wiki, and searched forums but couldn't find a relevant thread.
Click to expand...
Click to collapse
Yes it does happen. However it is not closing down it is merely minimising itself. So if you install a task manager that shows an icons for open applications on the task bar, all you have to do is tap the iIE icon and back up it comes exactly on the page you were on. I forget now if the likes of Magic Button task manager shows the iconson the task bar - I think it does. (So might be worth installing it?)
Mike
I'm pretty sure mine closes it altogether. when i open IE back up it starts at the default screen. I know when i press the red hang-up button it minimizes IE because I can open it back up to the page I was browsing, so I know that's not it. hmmmmm...... defective model? it must be a software problem but it didn't go away with my flashing to WM6.
I have CE OS 5.2.19199(build 19199.1.0.0) on my Wing and I have been searching for a fix for this issue didnt know if anyone else has experienced the same thing. When I open up text or setting or pics or anything with a scroll bar on the side the first time I tap on anything it scrolls all the way up or down randomly. Does anyone have this problem and know of a fix. Have just been dealing with it but gets annoying.
I have the same problem with opal. I think you should align screen frequently.
I recently upgraded my mogul to the latest stock ROM and was excited to use the large start menu feature introduced into the WM 6.1 update.
My problem is that when in landscape mode with the large start menu enabled, if you press the start menu a couple of times from the home screen, parts of the start menu stay on the home screen as artifacts and can only be removed by starting a program or something that uses the whole screen.
Is anyone else experiencing this issue? Is is maybe related to the HTC Home Plugin and not the WM 6.1? When I turn off the HTC Home Plugin from the today screen, the issue still exists.
Thanks!
I was able to reproduce the problem and attached screenshots of the problem to this message...
It seems that the artifacts only appear on the far right side of the screen, it looks like it is starting at pixel #241 or so... so maybe HTC isn't calling InvalidateRect properly in Landscape mode or something along those lines
BINGO! Nice work! You have just proved that i'm not going crazy!
Thanks for the confirmation. Don't know exactly what we can do about it though. Any ideas from the developers out there?
Thanks!
My Nexus 4 has Stock ROM Android 4.3 & the Navigation bar at the bottom does not respond to touch in Portrait position but works in Landscape position for applications where I can use the Landscape mode. In the Landscape mode the screen rotates the position of the Navigation bar.
I have through the developer option selected the Show Touches option which shows me the exact touch position on screen as a blob. In the portrait position I can see the touch points on the Navigation bar the home screen works for Google Now but the back & task do not work however I can see from the Show touch it registers the touch but no execution of the command happens. The same Navigation bar in Landscape mode works perfectly as required. These developments are after the OTA 4.3 upgrade. Can someone help me to either remove the navigation bar in the Stock ROM Android 4.3 as now I have an application from Google store called Button Saviour (Non Root) working perfectly. I have also observed that the due to the Show Touch option activation it generates sometimes on the navigation bar area on the extreme left a clear Show touch blob where as there is no one touching the screen. This Show touch blob sometimes rapidly oscillates horizontally in the Navigation bar area & which ever icons it crosses it automatically triggers them as well randomly. On touching the screen in the Navigation Bar at that time does not make the back or task button work but without touching I can the Show touch blob while oscillating managing to make it work while crossing over the respective button icons.
So the hardware does not seem to be the issue but some bug in the new 4.3 which is triggering this weird behaviour. I use the Nexus 4 mostly in Portrait mode hence it is frustrating to now suddenly not have the Navigation bar functional the way it was suppose to work. Can some one help & guide me on what to do to resolve this problem.
The softkeys are enabled within the framework.
Sent from my Nexus 4 using Tapatalk 4
Help
manojsap said:
My Nexus 4 has Stock ROM Android 4.3 & the Navigation bar at the bottom does not respond to touch in Portrait position but works in Landscape position for applications where I can use the Landscape mode. In the Landscape mode the screen rotates the position of the Navigation bar.
I have through the developer option selected the Show Touches option which shows me the exact touch position on screen as a blob. In the portrait position I can see the touch points on the Navigation bar the home screen works for Google Now but the back & task do not work however I can see from the Show touch it registers the touch but no execution of the command happens. The same Navigation bar in Landscape mode works perfectly as required. These developments are after the OTA 4.3 upgrade. Can someone help me to either remove the navigation bar in the Stock ROM Android 4.3 as now I have an application from Google store called Button Saviour (Non Root) working perfectly. I have also observed that the due to the Show Touch option activation it generates sometimes on the navigation bar area on the extreme left a clear Show touch blob where as there is no one touching the screen. This Show touch blob sometimes rapidly oscillates horizontally in the Navigation bar area & which ever icons it crosses it automatically triggers them as well randomly. On touching the screen in the Navigation Bar at that time does not make the back or task button work but without touching I can the Show touch blob while oscillating managing to make it work while crossing over the respective button icons.
So the hardware does not seem to be the issue but some bug in the new 4.3 which is triggering this weird behaviour. I use the Nexus 4 mostly in Portrait mode hence it is frustrating to now suddenly not have the Navigation bar functional the way it was suppose to work. Can some one help & guide me on what to do to resolve this problem.
Click to expand...
Click to collapse
same issue here even i try a factory reset
I flash the stock rom again and no clue of what to do
The exact same issue here, started behaving quirky since 4.3 and went bat**** crazy after the update second 4.3 ota (1.8mb patch google released recently). i used developer options to show the on screen touch blobs as well and it registers touches in the nav bar area, it just will not work in portriat (or rather that section of the screen) It is extremely frustrating.
I even went as far as to use adb and fastboot to restore my phone to stock 4.3 which would remove all files and place a stock 4.3 directly from dev.google but still It doesn't work.
The same issue
Im having this exact issue just a few days after i install a new update i hope that its a software issue :crying: and if is not warranty will cover it?
Navigation Bar issue
Same problem here , wont respond on portrait mode.
I did try to downgrade my android version to 4.2.2 (from 4.3) after the factory reset did not work, that did not work either.
Any ideas? could use some help
I have the same problem, I tried to restore the 4.3, the 4.2, but the problem remains, I also tried the cyanogenmod and 4.4, but it still does not work the navbar in portrait mode ..
No one knows a solution to the problem? You may have a hardware problem? Who takes care of the navbar?
Having the same issue here. Works in Landscape but not portrait. It went spastic this morning randomnly opening the clock and pullin the bar down itself. Show touches showed it registering touches all around the nav bar then suddenly it stopped. I cant use the bar now at all in portrait but the random touches are gone. I downloaded a touch detector and it shows all the way up to where the nav bar would be then deadzone, but fine in landscape again
anyone know a solution to the problem? I tried to put the last KRT16S factory image, but the problem is always the same ...
sorschumi said:
anyone know a solution to the problem? I tried to put the last KRT16S factory image, but the problem is always the same ...
Click to expand...
Click to collapse
Before update to 4.4, I installed purity rom, and in purity system settings there was option to change navigation bar height. Default height is 48dp, but you can change to 52dp and the buttons working. Not ideal solution, sometimes you must to hit button few times, but it's working!
But, after I update my N4 to 4.4 kitkat, and install purity rom for 4.4, there is no option to set button height to 52dp (max heigth is 48dp-default height) I hope so that purity rom will be updated and return option to set to 52dp.
Same issue here
Tried lot of things still not working .........
pls someone find the solution.......
skycoresaunish said:
Tried lot of things still not working .........
pls someone find the solution.......
Click to expand...
Click to collapse
I think it's a hardware problem. Mine just went bad as well.
I have this problem now, too. Google now NAVRING still works to open Google Now from the middle nav button, which is why I do not understand why they nav bars do not work at seemingly the bottom of the screen. It just seems like that part of the screen has died, though some times it randomly works....... what the hell is this?
Huawei ascend mate navbar problem
I have same problem. And not only that my landscape control also got messed up After factory reset.
Also when I try to scroll down the web page in landscape mode it dosent work on the same area. So does this mean screen is screen is not registering my touch.
Some times the middle button start acting funny. It operates by itself even the internet is off. Like virus or some thing I did checked with antivirus nothing found. After activating show touch option it is shows Google shortcut is always pressed.
Dont know how to fix. Dont know the reason pls. Help. Xda.
Do you use dt2w? For me, after enabling that feature this would happen after a while. The borders of the screen would become unresponsive. I disabled dt2w, rebooted and it was fine again.
Sent from my Nexus 4 using XDA Free mobile app
Hi to everyone!
I have the same problem since some days with the nav bar on stock 4.4.2. Factory reset + rom flash via fastboot + CM 11 innstallation did not help at all. I'll bring my Nexus 4 today back to the retailer for reparation / replacing.
I'll inform you guys about the report of service center but it can take up to 45 days.
Thanks. This works for me
haris0032 said:
Before update to 4.4, I installed purity rom, and in purity system settings there was option to change navigation bar height. Default height is 48dp, but you can change to 52dp and the buttons working. Not ideal solution, sometimes you must to hit button few times, but it's working!
But, after I update my N4 to 4.4 kitkat, and install purity rom for 4.4, there is no option to set button height to 52dp (max heigth is 48dp-default height) I hope so that purity rom will be updated and return option to set to 52dp.
Click to expand...
Click to collapse
Hi, I was facing the same issue on my mako. It just started without any notice. Being a flashaholic I thought it could be due to something I installed. Tried a lot of differnt ROMS including stock but no luck. Read somewhere about the "Show touch" function in the developer options and found that almost 7.5mm of the bottom of screen was not responding to touch. I then installed the stock 4.4.3 ROM, rooted it and installed gravity box. In Gravity I changed the navigation bar height to 120% and selected "keep at bottom" for landscape. I am now able to use the phone. I wish some custom ROMS start implementing 52dp height option so we could use these directly. I tried using gravity with Mahdi ROM but there is some conflict and I cant see the recents button. Also, the NB reverts to original and it needs to be enabled again manually
But thanks anyways. I dont want to buy a new phone for the next 6 months and this will work well for me.
Cheers