Wireless Modem - Windows Vista - Success - 8525, TyTN, MDA Vario II, JasJam General

Hopefully this can help someine else.
I finnally managed to get the Hermes working as a 3g modem over bluetooth with Vista, funnily enough only after stopping the wireles modem app on the handset.
I took the following steps.
1) get drivers from: http://forum.xda-developers.com/showthread.php?t=279329&highlight=vista
2) partner handest with pc over bluetooth
3) setup dial up connection on pc using your providers user /pass (maxis 3g was maxis/wap)
4) Insert *99# as phone number
5) start wireless modem app, select bluetooth and insert your APN (unet for maxis)
6) start modem
7) dial connection in vista
No Luck
8) stop wireless modem app on handset
9) retry connection in vista
Success
Not sure why it worked but it does repetedly, best of luck

i got mine working quite well. no problems at all based on the steps above, the only problem i have is that the bluetooth connection speed shows as 115k and usb is 230k even though i have HSDPA.
you might have missed out one step, go to "Programs - Wireless Modem". select the bluetooth option then start it. it will work then

Related

Laptop GPRS via BT on PDA

I have scoured the forums and the nice BT how-to's at geekzone web site but still can not get this connection set up. I want internet access on my laptop (W2000Pro) via BT connection to PDA (PDA2k) using GPRS on PDA. Maybe I just am using the wrong number to dial. I thought it is *99# for AT&T W here in the US. Detailed instruction on PC and PDA end will be much appreciated.
Have you put the modem string in?
On the laptop go to Control Pane > Phone and Modems > Modems
Highlight the XDA connection and click Properties > Advanced tab
In the 'Extra Initialization commands' field enter
at+cgdcont=1,"ip","Service provider"
for service provider it could be AT&T.com; you will have to find that out!
swamp2 said:
I have scoured the forums and the nice BT how-to's at geekzone web site but still can not get this connection set up. I want internet access on my laptop (W2000Pro) via BT connection to PDA (PDA2k) using GPRS on PDA. Maybe I just am using the wrong number to dial. I thought it is *99# for AT&T W here in the US. Detailed instruction on PC and PDA end will be much appreciated.
Click to expand...
Click to collapse
There are a few factors to consider when attempting to use a PDA as a GPRS modem, as follows:
1) PDA devices, throughout several years of my testing/engineering experience in the wireless data industry do not make good GPRS modems (In fact, most of them do not function as modems - as it was originally intended by the manufacturer)
2) The Win2k Pro has to be at least Service Pack3 for decent GPRS connectivity (I am going to assume that it is either SP3 or SP4 on your box)
3) Under control panel > phone/modem options (as mentioned by the person below) you need to click on the "modems" tab, then highlight your PDA modem and click the "Properties" tab....Here you will click the "Advanced" tab, AND in the "extra initialization command" bar you will enter the following string (case-sensitive) at+cgdcont=1,"IP","proxy" ....don't leave spaces in the string...then click OK and OK again (or apply and OK, whatever the option is)
4) Most importantly, you need to make sure that your SIM card from ATTWS/Cingular is accurately provisioned for the GPRS PDP option. (If it's not yet, you will need to call the ATT Wireless Customer Care/or Cingular Customer Care -whatever it is called right now)
5) You will then go into the Control Panel > Network/Dialup Connections and "create a new" manual DUN connection using that PDA modem driver (not your internal modem driver obviously - you would be amazed how many ppl make that mistake)...You will want to dial *99# ....You don't want to use ANY area code or dialing rules, and you want use both a blank username and a blank password (make sure "save password" is checked)
In conclusion....Provided that all of the aforementioned components are in place, you should be able to connect and browse/get mail, whatever your needs are.....depending on the capabilities of your PDA modem, you will get anywhere from 28kbps to 70 kbps for your data throughput.
Enjoy,
Sincerely,
Your local neighborhood friendly GPRS expert :lol:
PS. I just realized that you are using BT as your connection means (which implies you have to use Bluetooth Neighborhood, Bluetooth Places, or Bluetooth Devices, one of the above anyway........Therefore, just apply the settings I gave you to the Bluetooth DUN setup (instead of the Windows DUN setup)...You should see your PDA modem as a "bluetooth Dialup modem" on com6 or something of that nature.....
Cheers 8)
Finally got it - was easy in the end
A correction... I am using XP SP2 not 2000 (duh). Anyway I got the connection working and it all seems very easy in retrospect.
For anyone else having this problem: You just need to find the services offered by your pda2k through your "BT Places" on the laptop. Dial up networking will be offered, choose that and a shortcut will be created automatically in BT Places. All else was automatic, just dbl click Dial-up Networking. You will see a dialog on pda2k explaining the connection, you get a phone icon in banner area and then use the internet on your laptop just like normal. In case it does not happen automatically you just need to make sure you have a BT modem in Control Panel/Modems on a COM port and a BT connection using that modem with number *99#, no other options or settings required.
Glad you figured this out!
I was going to suggest using the Widcomm drivers found on this forum. I switched and was able to get a DUN service.
On another note if you are using the MS BT drivers, I found that if you establish an Activesync connection via BT, you can setup the outgoing serial port as the BT modem.

Using Jam as Blutooth GPRS modem for laptop with Vodafone UK

I'm trying to get a net connection for my laptop over bluetooth through my Jam.
I'm on Vodafone UK & they provide software called "Connect Me" for the laptop but, of course, the list of supported phones during setup doesn't include the Jam or any PPC Phone device.
Does anyone know how else I can go about this?
Cheers,
M1
Hey. It shouldn't be too difficult. The only thing you need is to start the modem application on your Magician and (provided that you have a working GPRS connection for your provider already configured) enter the exact (!) name of this connection (on my Magician it's the GPRS connection under "ISP" - use the name of this GPRS connection, not ISP!) in Options->Use preset GPRS APN and also check the box. Then you have to go to the settings on your PC, check in your Bluetooth manager the available services and click the modem service (SSA or something). There you have to enter your name and password of the provider and as phone number (at least for german providers) *99#. In the last step, you might have to check the TCP/IP settings and set them the way your provider needs them to be. Hope it helps.
Thanks Dandie - I'll give it a go....
Nope - sorry - I'm totally baffled.
My GPRS connection on the phone is fine in normal use and is names "voda gprs".
By "the modem application" I assume you mean "Wireless Modem".
In the tools/option menu I have "Preset GPRS Connections" checked and the APN box completed as "voda gprs"
The connection type is set to bluetooth.
Whjen I press the "Start" button not a lot happens. It doesn't connect to my GPRS service.
However, if I connect to my GPRS service manually by clicking the connection icon in the bar at the top and clicking "connect GPRS" the "Connection" box in WModem turns yellow - which I assume is a good thing.
I have bluetooth turned on on my jam and my laptop (sony vaio) and the devices are already paired.
However - the laptop BT manager (Bluespace NE) only shows the following services available on my Jam: File Push/Serial/vCard & Dial up Networking.
No modem service. Clicking dial up networking gives me Dial-up networking Com 8 & Serial Port Com 10 options which I have enabled. But clicking dial up networking just pops up the options box again and doesnt seem to connect.
Launching browser on laptop having done all this = still no connection.
Jeez - I'm not new to this and have had this laptop connected to numerous mobile phones for internet access but this is driving me nuts.
I just want to make a BT link launch my browser and go but it ain't happening ;(
You're on the way. Don't give up. It's not anywhere as easy as it is with a normal mobile phone and a special application. This is the fault of MS if you ask me.
Anyway. You shouldn't connect to your GPRS connection when you use the modem. Otherwise it won't work. So disconnect on the PPC, start the modem application and select bluetooth (the APN setting is alright already). Klick on start. Now you have to initiate the connection from the PC. Connect to the dial up profile of your PPC. Then should a normal DUN dialog be displayed, allowing you to enter the password, number etc. These informations are given by your provider. The bluetooth modem might have to be configured separately in device manager of the system. (you don't need AT strings when you use the APN setting on your PPC)
I give up.
Followed these instructions to the letter - also followed MS support sheets & nothing.
Just end up with helpful error message - error 777 the modem on the remote computer is out of order.
My God - this should be soooo simple. It's a basic requirement. But I am going to have to revert to my trusty cellphone for mobile internet from laptop.
Even if I could get it to work I don't want to have to launch the Wmodem app on the Jam every time I need to connect. This is screwed up.
Grrrrarg.
Thanks for the advice anyway.
Hi,
It is a requirement to start the Wireless modem app on the Magician [if you want to use it as a modem] and set it to Bluetooth.
On the PC, go to control panel > phone and modem options and select the properties of the modem installed for the Magician - I am on XP SP2 and it is installed as a 'Standard modem over bluetooth link'.
On the advanced tab, enter +CGDCONT=1,"IP","Internet" and then set the Dial-up number in you network connection to *99# - that is it.
I am on T-Mobile [UK] and it works fine
@pcd
When you enter the AT string, you have to leave the option "Use preset GPRS connection" in the settings of the Modem app on the Magician cleared. For me, both ways worked, either by naming the (working) GPRS connection in the settings or by entering the AT string. I prefer the first solution. You can't combine them! (at least it always failed when I tried)
@MarkOne
You're damn right! It really is too complicated and could have been made much more comfortable. But once you get it to work, it's quite flexible too, since you can connect via cable, infrared and bluetooth.
@pcd
When you enter the AT string, you have to leave the option "Use preset GPRS connection" in the settings of the Modem app on the Magician cleared. For me, both ways worked, either by naming the (working) GPRS connection in the settings or by entering the AT string. I prefer the first solution. You can't combine them! (at least it always failed when I tried)
@MarkOne
You're damn right! It really is too complicated and could have been made much more comfortable. But once you get it to work, it's quite flexible too, since you can connect via cable, infrared and bluetooth.
OMG, I got it to work, and I'm using the internet connection now on my laptop. I've had the SX-56, the MDAIII, and now the MDA Compact. I must say that I like the compact the best as it is the most practical. I have T-Mobile in the USA, and the initialization string for the bluetooth modem on my laptop is:
+CGDCONT=1,"IP","Internet3.voicestream.com"
My APN here for T-Mobile is internet3.voicestream.com. I think it's different for people who use WAP though.
Thanks guys. Now I can sign on by bluetooth, USB, and serial.
Afraid I gave up on this a long time. Nothing I tried worked and life's too short to spend several days trying to get my "phone" to work as a gsm modem.
The anansky rom upgrade, by comparison, took just under an hour (mainly as it was my first outing with a hex editor).
Mark One, I totally agree with you. I've tried everything and I can't get the bloody thing to work.... I had no problem last time with the Widcomm stack on XP but now that I've upgraded to SP2, the bloody MS Stack is driving me nuts.... Tried all the instructions here and it still won't work. It's pissing me off!
There is the option within Wmodem to use bluetooth, i have only used it over usb atm tho
http://forum.xda-developers.com/viewtopic.php?t=34570
Imp
Yeah, I guess on the PC you need the Widcomm Stack, or at least any other than Microsoft
You can find many hints in the web how to make the Widcomm stack runs under SP2.
i ve got nearly same problem but i did all the same and cant connect
ive got internal BT (toshiba), i create SSA connection (automaticaly at port com 40) , entered extra dial string command (it is 100% correct), turn on Wireless modem program at my HTC, choose bluetooth and tap start.
Maximum that i reached was that connection led turned yellow. Other 2 are black.
i tried to make direct port connection at ports from 1-10 and to install modem manually. But i could choose only standart modem cause usb modem driver dont fit.
So ... dont know what to do
Ive got the same problem at the minute, however when i browse what services are availible on my magician in "My Bluetooth Places", dial up networking isnt one of them!
Also i havent got any form of bluetooth modem installed on my pc anywhere (i.e the phone) ive tried enabling wmodem and then searching for it but i get nowhere fast
Please help i need to get this working!
Ive just been in touch with Imate (who are BRILLIANT by the way)
and i have solved my problem! here is the pdf they sent me which i followed and it worked fine!
argh .. didnt help. I have another BT browser and it is not same as u have . And it creates not bluetooth modem but only a standart 33000 kbs modem
so , i need a driver for BT modem on Jam
When your Stack on the PC supports SSA, you can install a Bluetooth modem yourself. Just go to Hardware, select "device connected", then chosse "select yourself", then "Add new hardware", then select Modem then "select Modem yourself", search for Widcomm (maybe other Stacks work aswell), select Modem and then your outgoing com port! Then you should have the Modem available.
I think the radio version 1.12 didn't work for me either. Try installing the radio 1.13 (which I would recommend anyway) and maybe also the latest ROM version (I successfully use version 1.12).
You need some patience with that crap but it works.
Chaosmage, which bt software you using?
been using mine as a modem since february.
my way is similar to one above, except that I DO NOT turn the wireless modem on.
using the XP SP2 built in stack with an MSI 6967 dongle.
in bt services in control panel, pair the devices.
on device tab, highlight the device and click properties
go to the services tab and tick the DUN service.
click ok and wait for the new hardware bubbles by the clock to disappear
In phone and modem options in the control panel, click the modems tab
open the properties for the standard modem over bluetooth link
on the advanced tab, enter at+cgdcont=1,"IP","internet" in the extra initialization field
click ok and then go to network connections
create a new connection that dials *99# using the standard modem over bluetooth link - vodafone would tell you to use a login and password of web, but that's not really needed as they don't use authentication (none of the uk networks do)
This i know works, cos it's how i do it, and also how i used to set them uo when i worked at vodafone in newbury.
Any q's, feel pree to PM!

Bluetooth / GPRS / Laptop / MDAII

And another question about bluetooth modem/gprs/laptop...
Even though I've read all (I guess) questions and answers here.
I want to browse over the internet using my MDAII as a bluetooth modem.
- My provider is T-mobile in the Netherlands
- MDA bluetooth is in discoverable mode
- On my Windows XP pro laptop I have paired my MDA
- I've got a bluetooth modem configured in Control panel with the string AT+CDGCONT=1,"IP","internet",0,0
- Number to dial is *99#
When I doubleclick the DUN I get a messagebox which tells me to pick up the handset, dail *99# and click OK. When I do that nothing happens and the connection is disconnected.
I tried to give in the phonenumber in a terminal window (ATD*99#), then I see CONNECT and the usual garbage, but when I close the window it is still disconnected.
A "query modem" in the modem configuration is succesfull. My laptop is able to communicate with the modem, but that is all.
What do I do wrong?
I've tried using an USB modem, but that gives the same result.
if you are using pocketplus or another program which close applications insted of minimizing them when you press the X
then i guess closing the connection windows would close the connection
Thanks for your reply.
I'm just using Wmodem on my MDA and a DUN connection on the laptop. Everything as simple as possible. The terminal window is an option from the DUN connection.

Tmob-Compact Usb modem

Hello all,
I know this has been covered so many times but I cant seem to get an all in one solution. I can find countless walkthroughs but no drivers anywhere.
I have Tmobile MDA compact which I want to use as a USB GPRS modem on either win xp or win 2000.
I dont have my CD so no driver. Does anyone have the USB driver or a link?
IF anyone uses this I would love to hear some success stories. I did try to do this 6 months ago on an old pc when I first got the device but no luck.
I would really find it helpfull if I could get this working today!!
Thanks!
Hi yarod_g14,
I use this for cheap, but slow internet access. You'll need to find the usb_modemdialler. I'll upload it this evening if you're still interested by then. It wasn't on the cd, found it somewhere on the web. Works great: start wireless modem (set accesspoint in the options) on the magician then connect usb start usb_modemdialer check accespoint & connect. If there's a driver too I'll upload it aswell, can't remember.
Cheers, M
Somehow attachments don't work for me.
That would be so appreciated!
Thanks very much!
If somebody needs: The HTC Modem Driver from the supplied CD, to use the Device as a modem on PC/Notebook
http://home.teleos-web.de/vschildmann/htcmodem.rar
Hi yarod_g14,
I've uploaded a tiny zip file USBModem_Dialer.zip in the \USB_modem folder. It contains an inf for the modem & the dialer itself which requirers no installation , just run it. Remember to install the modem first.
Have fun, M
I have had trouble with this up until recently.
1st make sure your gprs connection works by itself on your PPC.
I disabled active sync over usb on both my PPC and my laptop from within active sync itself.
I then loaded up the Wmodem application on my ppc and clicked "tools" in this menu i checked "preset GPRS connection" and in the APN field i entered my APN name (for me it was orangeinternet) after clicking "ok" i was back to the main program screen.....i then clicked "start" and attached my USB cable to my laptop.
My laptop (windows XP) detected a new USB device, which i gave it the modem inf file attached in the post above this then gave me a "HTC USB Modem" in device manager.
Using the USBModem_Dialer.exe application, i had a drop down box at the bottom which was named "HTC USB Modem" and i changed the APN field to my network providers APN address (orangeinternet for me) my network provider does not require a username and password so this was left blank.
I then choose "Dial" after about 10 seconds my laptop causes my gprs connection on my phone to connect and then shows a stanard dial up connection icon in the taskbar.
Hope this helps!
Imp
Thnx Impossible,
U filled in the gaps. I included them as .pwi in the new zip upload (same name & place), so everyone can benefit.
Regards, M
Is there any way of getting the Magician to be a IrDA (Infrared) modem, instead of a USB/Bluetooth modem? I need it to be IrDA for my old laptop
Hi jainoxi,
Googling around for 'modem dialer ir' I found this: http://www.pdastreet.com/forums/archive/index.php/t-39280.html
They're talking bout ir pda modem dialing mobile phones & required drivers, so maybe your wishlist is there discussed as well
Cheers, M
Hello!
Impossible: did you set up a new dialup modem connection before to connect the jam via usb?
I mean, i tried to use the jam as a modem. I followed your step by step tutorial. But it doesn t launch any gprs connection on my phone ;(
Could anybody tell me much about this?
thx by advance
This is how I make the connection:
- disconnect magician from usb
- disconnect from gprs
- start Wireless Modem program on magician
- check connection type usb
- check tools -> options: preset gprs connection & give in accesspoint name
- press start button
- disable usb connection in PC AS
- connect magician to usb
- install modem driver
(now you should see your htc modem in the modem control panel item)
- run usbmodem_dialer
- check the modem in the lowest box & access point in the first (tmo doesn't use user/password)
- hit the connect or whatever button to set up the connection, takes about 10 seconds
Now you're connected or you'll receive an error. I noticed that sometimes I have to add a ,0 to the init string from the modem (on the pc)
Does this help?
Well these are the steps i followed but it doesn t work...
I suppose it s linked to a msg appearing when i try to acces modem options configuration tab in the xp's control pannel. It says:
The phone and modem control pannel cannot be opened. This may occur some problem in the phone service' startup (sorry for my translation, in fact my msg comes in french as it s my os language).
So i ll stop with this, i ll format my computer in a month so I hope this will resolve this =)
Thanks anyway!
OK, then good luck with your re-installation. I guess you're problem relies in that area. Too bad cause it works fine.
Regards, M

Wirless modem dont works

Hi
I have problem with trion and wirless modem...
i open in programs->wirless modem---
select USB port and do start.
Connect the trion on usb
but not append... The PC dont see any modem or new found new hardware wizard dont appear...
so in modem i dont have the tynt or trion...
what can i do?
thx
SAme here. It's a known issue
Im thinking to try:
Mobile stream USB Modem for PPC.
Somebody have test it?
IM getting the same thing now. If this is a known issue, and this was like 3 months ago is there any more news on this? Its becoming a right old pain in the backside for me right now!
I have two hermes, both with the same problem. I connect using dial up (bluetooth) but 300 kbps instead of 800
I can connect just fine over IrDA when using GPRS. I don't have bluetooth on my laptop, but I guess the transfer rate over bluetooth is to slow for a fullspeed connection. I can't test that either: I have the low-budget option Pocket Internet Total from T-mobile which is downgraded to 64kbps over UMTS.
For using fullspeed UMTS (3G) even HSDPA, I would recommend using the USB connection.
Two things that can make trouble:
a) I found was that when using the USB cable, I had to disable the automatic connection some programs try to make (such as direct push)
b) I used COM8 for my bluetooth gps: after setting the gps to com0, I could connect without any problem
I read in some thread that you had to disable the advance network features over USB but as far as I can tell that only limits the speed over usb (my guess: USB 1.0 (1.1) in stead of 2.0)
I have a tytn and it works great, I get 3g speeds between 900 and 1300.
1) Plug the usb cable into your pc
2) Make sure you have activesync USB connection disabled
3) Disconnect your gprs or 3g connection (this is real important)
4) Activate the wireless modem app, start connection
5) make sure your gprs/3g connection is inactive
6) plug your pda into the usb cable
7) pc recognizes the wireless modem
8) install driver
9) Create dial up to *99# or whatever your carrier uses
10) Again make sure your gprs/3g connection is inactive
11) dial using your dialup shortcut
after the first time, all you have to do in make sure your gprs/3g connection is disconnected, start the wireless modem app, plug into your usb cable, dial the *99# using your wirelss modem dialup shortcut
I have it working on both Windows Xp and Windows Vista...It is a great backup to my local internet connection and it is very easy to use
Pardon me if there is a difference, but on my Hermes to use its internal data connection as the bearer you have to use *99# (NOT #99*) as the number to dial when configuring the dial-up connection in Dial-Up Connections.
When I tried it (several times) on my XP laptop, it was almost childishly simple: regardless of whether the phone was already plugged in via USB or not, just load the wireless modem app, set the APN to general.t-mobile.uk, hit Start and bam: I wait for it to initialise (the lights in the application window light up to show connection and data, and once those show up just hit dial. No username, no password, Robert's your mother's brother. Worked every time I tried it.
Using a T-Mobile UK-branded Hermes fwiw.
eagle 1 said:
I have a tytn and it works great, I get 3g speeds between 900 and 1300.
1) Plug the usb cable into your pc
2) Make sure you have activesync USB connection disabled
3) Disconnect your gprs or 3g connection (this is real important)
4) Activate the wireless modem app, start connection
5) make sure your gprs/3g connection is inactive
6) plug your pda into the usb cable
7) pc recognizes the wireless modem
8) install driver
9) Create dial up to *99# or whatever your carrier uses
10) Again make sure your gprs/3g connection is inactive
11) dial using your dialup shortcut
after the first time, all you have to do in make sure your gprs/3g connection is disconnected, start the wireless modem app, plug into your usb cable, dial the *99# using your wirelss modem dialup shortcut
I have it working on both Windows Xp and Windows Vista...It is a great backup to my local internet connection and it is very easy to use
Click to expand...
Click to collapse
where do I get the driver for the 8525 to work as a modem?
WTE said:
where do I get the driver for the 8525 to work as a modem?
Click to expand...
Click to collapse
off the cd that came w/ your 8525
it tells you how to install it in your user manual.
berdinkerdickle said:
off the cd that came w/ your 8525
it tells you how to install it in your user manual.
Click to expand...
Click to collapse
the only CD i have that came in the box is the one that gives you ACTIVE SYNC and OUTLOOK.
Where online can I get the drivers?
My problem is my computer is not recognizing this phone as a modem.
WTE said:
the only CD i have that came in the box is the one that gives you ACTIVE SYNC and OUTLOOK.
Where online can I get the drivers?
My problem is my computer is not recognizing this phone as a modem.
Click to expand...
Click to collapse
Why not read the Hermes wiki for some very usefull information:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
The hermes wiki Faq http://wiki.xda-developers.com/index.php?pagename=Hermes_FAQs would have pointed you to a link to download the htc wireless modem driver:
http://www.box.net/public/jytpxq47nk
or search google for HTC Wireless Modem download
and you would have found instructions at
http://www.theunwired.net/?itemid=1656&catid=80
Good Luck....
is it the same steps througt bluetooth ? I would have to make modem for my Pc throught BT.
Hi, tried to connect to my WIFI router by WPA with TKIP Encryption, but in TYNT isn`t any settings like that. Its availalbe just WEP.
Is any workaround? New driver for wifi or anything?
THX

Resources