Hi I have a problem with my XDA11 whilst trying to upgrade my navigator 3 software to navigator 5......
After I load the main program upgrade and then try to install the map disc one my pc ( desk top XP Profesional os ) it come up with tempory folder full, does'nt say if it it the pc or the xda11.
I have gone into all the temp folders on the pc and emptied them and it had not resolved the problem and I cant find any in the search function on the xda
Any ideas??
Its a genuine copy of the Tom Tom software as well and there are no contact details on there sites including e-mail links
Regards Lee
Anyone got TomTom 5 working with Windows Mobile 5?
I received my k-Jam this morning but the setup.exe bombs out so I cannot get TT5 installed at all
any help appreciated!
thanks
Try to install the .cab file instead, it should work.
thanks but I have tried that. 3 of the 4 CAB files install but the main one (ttn.cab) - looks like its going to install ok and then you get "the file....installation was unsuccesful".
Any ideas?
Nothing on the TT site - I'm surprised that X51v or other early Windows Mobile 5 users have not been onto this one?
It seems like a problem with Activesync 4.0 initially but as the cab files don't work i guess we need a patch from them?
anyone got it working?
thanks
TomTom 5 install Problem
I had the same problem with the auto run procedure on my mini SD card.
I solved the problem by navigating to the '2577' folder and running each cab file directly on the phone (didnt use activesync). This seemed to work for me.
However, now Im having trouble with bluetooth com ports. Tomtom configuration does not show the port numbers assigned to my paired gps reciever.
Try this
http://forum.xda-developers.com/viewtopic.php?t=29282&highlight=tt5+kjam+qtek+wm5
Let me know how well tt5 runs on the k-jam ie how smooth etc as i'm awaiting my miniSD so can't try it yet!
TomTom Navigator 5.10 works with Windows Mobile 5 and Activesync 4 - but it's NOT easy. The instructions in this thread got it working for me (though I used COM4 instead of COM0):
http://forum.xda-developers.com/viewtopic.php?t=28386
Also I found that the bluetooth GPS had to be locked on to a signal for TomTom to see it at first - was fine after that.
Although my device is a HTC Universal, it has the same OS and Activesync version as your Wizard so there's no reason why it shouldn't work. Go to the above link and enjoy :lol:
Re: re: K-Jam / Windows Mobile 5 & TomTom 5
hampers said:
thanks but I have tried that. 3 of the 4 CAB files install but the main one (ttn.cab) - looks like its going to install ok and then you get "the file....installation was unsuccesful".
Any ideas?
Nothing on the TT site - I'm surprised that X51v or other early Windows Mobile 5 users have not been onto this one?
It seems like a problem with Activesync 4.0 initially but as the cab files don't work i guess we need a patch from them?
anyone got it working?
thanks
Click to expand...
Click to collapse
I had the same problem. All cabs would install except the ttn cab. Here's how I solved it.
1. uninstall everything
2. install gps.cab
3. remove sd card and soft reset (this is the important bit)
4. install ttn.cab and this time it should work
Thanks for your help guys.
sl9; How did you get 5.1 to upgrade? After copying the files from the downloaded RAR file I tried to run the setup.exe file on the phone but get a message telling me that the file is not a valid windows mobile program (perhaps it is a smartphone program).
[/quote]
aikibrown said:
Thanks for your help guys.
sl9; How did you get 5.1 to upgrade? After copying the files from the downloaded RAR file I tried to run the setup.exe file on the phone but get a message telling me that the file is not a valid windows mobile program (perhaps it is a smartphone program).
Click to expand...
Click to collapse
The setup.exe is meant to be run on your PC, it uses activesync. Obviously we know this doesn't work so the solution is to get the 5.10 upgrade from TomTom website as the ZIP FILE, NOT THE EXE - this is important
Anyway, extract the zip, and copy the directory with the 4 cab files in it to your SD card (where you have the map on). Then execute the cabs one by one, using the tip by jdee246 above if any of the cabs don't want to install.
After you install it, then the fun begins trying to get the damn thing to recognise your GPS device, see the link in my earlier post for a guide
Thanks guys - the soft reset seemed to do it. The manual install worked fine in the end.
I now have to wait for TomTom support to give me a code as I already had two a few months back so I can't report on how well it runs yet. Overall tho the Wizard/k-Jam is pretty slow - esp for screen refreshes.
I did try the BAKONL hack which I use to test TomTom on various devices but the ttn.cab on that patch just will not install for me under Win Mob 5.
thans
Thanks to all for your help.
Managed to get Tomtom 5.1 up and running. 5.1 seems to have fixed the gps connectivity problem.
The software runs on the K-JAM just as fast as it did on my QtekS110, with no problems yet.
aikibrown said:
Thanks to all for your help.
Managed to get Tomtom 5.1 up and running. 5.1 seems to have fixed the gps connectivity problem.
The software runs on the K-JAM just as fast as it did on my QtekS110, with no problems yet.
Click to expand...
Click to collapse
Hello ,
How can I install the folder "voices" because it's not a ".cab" ?
Thanks for your help.....
Who had install Tomtom 5 on the K-jam ?
Because it's too hard for me and I don't understand everything .... :?
Thanks for your help !!!!
:idea:
In total you have to copy 4 files from your wm2003 device and paste to wm2005 in these dir:
mobile device\tomtom\CurrentMap.dat
\TomTom\TomTom\data05.bmp (voice files on cd)
\TomTom\TomTom\data05.chk (voice files on cd
\Program Files\navigator\data.chk
\Program Files\navigator\tomtom navigator.exe
\Program Files\navigator\navigator.cfg
that's all.
data05.bmp and .chk is for example, you can choose one of your own voices.
Look this up on your device other wise i send you my files so you can try them.
Good Luck
GuidO
Thanks for your help !!!!!
I try this tomorrow ....
regards.
T-Mobile MDA Compact
Hi Guys
I seem to also be having problems with my MDA.
I can install tom-tom just fine, but for some reason it just doesnt recognise my Bluetooth GPS receiver. The receiver brand & model is as per this page:
http://www.qstarz.com/html/products_BT-Q770.htm
I have enabled COM 4 & 5 in the bluetooth settings page and configred tomtom to connect using either com4 or com5 but it just doesnt work.
Any help in solving this problem would be much appreciated!
Many Thanks!
This for all of you who are still having problems...
This is what i did to get my Tomtom working on my T-mobile MDA Compact:
1. uninstall tomtom using add/remove programs.
2. using file explorer deleted the following folders:
\tomtom
\program files\navigator
\program files\contacts navigation
3. Using a registry editor - browse the software sub-folders of HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE and delete any tomtom, tomtom navigator, and/or tomtom gps/ tomtom bluetooth supprt folders.
(in order to avoid steps 1,2,3 you can also perform a hard reset after you have backed up all your data & files)
4. Navigate to HKEY_LOCAL_MACHINE -> DRIVERS -> BUILTIN -> BTINSerial
5. Now change the index key from 4 to 6.
6. Exit the registry editor.
7. Soft reset your MDA.
8. Now install TTN5
9. After following the initial setup prompts of TTN5 exit it.
10. Now install tomtom nav. 5.1 (update available from the tomtom website)
11. Go back into tomtom and select "change preferences"
12. Go into GPS CONFIGURATION
13. Select Other Bluetooth
14. Select COM5
15. Click Done
16. Give tomtom about 10 seconds and your GPS navigation should now work OK!!!!
Hope this helps everyone who is trying to get this to work. I have spent a lot of time trying to find a solution that works and this i feel is it!
Needless to say use this solution at your own risk - all i can say is that its worked for me!
once installed, use this procedure.
http://forum.xda-developers.com/viewtopic.php?t=32267
It works 100%
Re: T-Mobile MDA Compact
unknown01000 said:
Hi Guys
I seem to also be having problems with my MDA.
I can install tom-tom just fine, but for some reason it just doesnt recognise my Bluetooth GPS receiver. The receiver brand & model is as per this page:
http://www.qstarz.com/html/products_BT-Q770.htm
I have enabled COM 4 & 5 in the bluetooth settings page and configred tomtom to connect using either com4 or com5 but it just doesnt work.
Any help in solving this problem would be much appreciated!
Many Thanks!
Click to expand...
Click to collapse
Can you confirm that HKEY_LOCAL_MACHINE -> DRIVERS -> BUILTIN -> BTINSerial is correct - My Vairo didnt have that key...
Plus I seem to be having the same probs as you did but with the Qstarz Q880...
Terran
ttn.CAB won't install despite reset
Tried installing TT5.0 on my Vario, but no luck. Like posted before, it won't install ttn.CAB. I tried:
removing all TT files, also from registry
soft reset,
installing gps.CAB,
remove SD,
soft reset,
then install ttn.CAB
but it still says 'installation failed'. Aaarrrggghhhhh
Any ideas, anyone?
Hi,
I just tested successfully the following procedure:
1) install TT5 using .cab files (transfer to the device & run each one)
2) pair BT unit;
3) configure TT5 using "Other Bluetooth GPS", "max baud rate", "com 0";
4) close TT5;
5) copy the navigator.cfg file (in Programs\Navigator on your device) via Activesync to desktop;
6) open the file with wordpad - DO NOT ALTER anything else but COM0 to COM5;
7) close the file;
7b) save the file modified back to the device;
9) Turn on BT reciever;
10) start TT5, wait a few seconds and...voilà !
Cool
I'm glad to see that someone else has tried it and it works for them too.
thanks Italos !!!
Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!
gogol said:
Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!
Click to expand...
Click to collapse
We are not talking Magician we are talking Wizard
I had it working fine on my Magician, just like you
But I have upgraded to a Wizard and the above
process is what I had to do to get it work on the Wizard
Yeah I know that. We are talking about WIZARD.
That's why I use but ... meaning: it (my tomtom) is working fine with my Magician, but I dont know if it will work with WIZARD.
That's why I ask "What kind of tomtom do you use?" ... Registered? Or CRACKED one (like mine, in my Magician).
darkwarrior said:
gogol said:
Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!
Click to expand...
Click to collapse
We are not talking Magician we are talking Wizard
I had it working fine on my Magician, just like you
But I have upgraded to a Wizard and the above
process is what I had to do to get it work on the Wizard
Click to expand...
Click to collapse
Makes no difference m8 - the problem seems to be "universal"
It should work if you follow those instructions, you have a BTGPS receiver and whatever install of TT5
Hi Guys,
New on this Forum, bought a Qtek 9100 a few days ago.
Have been struggling since to get tomtom 5 to work with my BT GPS, and
I just wanna say big thx to Italos for the instructions, worked like charm.
One thing though, I still got TomTom 5, I tried to install the 5.1 update and ended up in it saying it can´t find any maps...ok so back in version 5 all that was located in the "\My Documents\TomTom\CurrentMap.dat file. SSo I edited that one to point to my map on the storage card.
Fired up TomTom 5.1 again, and still not working, ok then I was not sure I had a real tomtom5 map, so I tried to extract the map from the TomTom5 DVD, well wen´t fine just to extract the cab, but I then ended up with these files.
00000.poi.010
000cline.006
000faces.004
0mapinfo.005
0traffic.009
SCANDI~1.000
SCANDI~1.007
tmccodes.008
I guess it will work if I extrackt these ones and replace those on my card, but how do I go about it?
I have tried with winrar, and that does not work, anyone who knows which program can extract these files?
thx / fahlis
Cant see any other person having this problem from my searches and topics here.
I am trying to load tomtom5 from a disc. it is the same one i used in my xda2 but it will not load on my XDA exec.
I have tried to copy to the card and run but that will not work it says not a correct application.
I have 5 and 5.1 update on disc which worked on the xda2.
Neither will load to the Exec
I load the disc to pc select uk then select install but it immediadtely brings up the error message with the send to microsoft option.
Dont understand this as it worked on the xda11.
Any ideas?
Thanks
Clive
(apologies for putting this on news forum originally)
Hi
get the 5.2 update from tomtom, install it, copy the voice files from you
v5 cd to tomtom dir in root "/", copy the maps to your mmc.
it worked for me
was the 5+5.1 known to not work then?
I had the same problems
Could not install from cd either whereas had no problems with my xda2-managed to use updat 5.2 but could not activate software via the gprs connection. ihad to get anew activation code from tom tom. this worked. i don't think version 5 is as good as version 3 and i wish i hadn't upgraded as not only are there more errors on the maps but it takes my new xda a lot longer to connect to the gps receiver.we found loads of mistakes when using the new version 5 on the xda2 in the summer when touring tom tom kept taking us to roads whichwere still under construction and couln't be used. we did tell support about this but i don't find them particularly helpful
creynish said:
was the 5+5.1 known to not work then?
Click to expand...
Click to collapse
my v5 cd crashed the computer when useing active sync 4.x same with 5.1. update....
5.2 installed ok.
I have a O2 XDA II mini s and Tomtom Naviagator 5 software. I am using a Tomtom BT GPS Reciver.
When I try installing the software I get the Windows Error Box.
Can anyone give me a straight forward solution to this problem, I have trawled through just about every forum I can find to no avail.
Its driving me nuts please help!
The solution is simple really.
tomtom 5.00 is apparently not compatable with wm5... well it is just not off the CD.
You have a choise either you direct to the cd "pocket pc" and copy the zip/cab files over to your phone and install it from your phone. Then you install maps onto your hard disk and copy them to a storage point.
OR
d/l tomtom 5.** about .20 currently, install that then you will still have to copy the voice from the voice directory on the CD tp the storage on your phone and will still have to do the same with the maps.
if you want you b.t. gps to work I found to copy the gps cab file and install from the phone.
it all works very well even 5.00 but like I said you cant install from the CD.
its a pain, hope this helps
Ive Tried copying the following cab files
D:\tomtom\nveur\pocketpc\gps.zip
D:\tomtom\nveur\pocketpc\PIMMAddin.zip
D:\tomtom\nveur\pocketpc\ttn.zip
D:\tomtom\nveur\pocketpc\wizard.zip
Ive installed them on my phone but i cant find the application to launch Tomtom.
Ive also tired download the update and installing the cab files, i have the same problem with that.
Am i missing anything?
Im thinking of getting ALK CO-Pilot has anyone had any problem installing it to a Wizard.
just remove it and try d/l 5.21 off the tt website.
install it from your PC not as cab.
Also you may need to install your today cab, but this is not a normal thing. also you may have to send off for a new activation code if you used tt5 on another phone.
good luck and you will have the same problem with co-pilot as it also designed for wm2003/se so stick with tomtom.
look in the jamin section there is a post i put in about solving this problem