8525 PIE / Messenger / Hotmail and GPRS - 8525, TyTN, MDA Vario II, JasJam General

A couple of days ago with the help of several people postings in this forum I was able to unlock my 8525. But I just realized that PIE stalls for ever opening any page and also the sign in for MS Messenger and Hotmail are impossible with GPRS. My Gmail account is set to retreive email every 15min thru GPRS and is working very different compared on how it works in the 8125 as well with a Qtek 8500. The 3 applications work as a clock during WiFi connections but once I use GPRS simply they don´t work at all. I have an 8125 with he same settings as my 8525 and GPRS and the aforementioned applications work great thru GPRS. Does anybody has a clue on what possible is going wrong?

I have the same problem as you...
can not connect to messenger using gprs... and I'm also in Mexico (monterrey)
Maybe it could be because of the carrier... what company are you using to have gprs service??

Please KINDLY HELP with Project
After 5 or 6 months I decided to rescue my Hermes from the junk box, I was hopping that WM6 would help in data connection problem but unfortunely it didn´t! Then I decided to start a project to investigate the cause of this problem, the first step in the project was a registry key comparison on the same device under 2 different networks (Network "A" where data connection is impossible & Network "B" where data connection is excellent). The first finding was on the reg key:
HKLM\Comm\Cellular Line\Parms\Tcpip
Network "A" registry shows values of 10.11.12.13 and 10.11.12.14 for WINS and Network "B" doesn´t even show this key.
Please help me (and to many others with similar problem) and provide:
1.- Your network name
2.- YES / NO (Your server assign DNS and WINS addresses)
3.- YES / NO (If answer to #2 was YES, please indicate if you see address values for WINS in your registry)
Thanks a lot

Network A
1. Movistar Panama
2. Yes 200.39.10.1
3. No
luiggi said:
After 5 or 6 months I decided to rescue my Hermes from the junk box, I was hopping that WM6 would help in data connection problem but unfortunely it didn´t! Then I decided to start a project to investigate the cause of this problem, the first step in the project was a registry key comparison on the same device under 2 different networks (Network "A" where data connection is impossible & Network "B" where data connection is excellent). The first finding was on the reg key:
HKLM\Comm\Cellular Line\Parms\Tcpip
Network "A" registry shows values of 10.11.12.13 and 10.11.12.14 for WINS and Network "B" doesn´t even show this key.
Please help me (and to many others with similar problem) and provide:
1.- Your network name
2.- YES / NO (Your server assign DNS and WINS addresses)
3.- YES / NO (If answer to #2 was YES, please indicate if you see address values for WINS in your registry)
Thanks a lot
Click to expand...
Click to collapse

It only take a few seconds
Come on guys...! It only takes a few seconds to find out and give your feedback. I kindly ask for your help.

Related

Vodafone GPRS Settings?????

Assistants required!!
I have attempted to set up GPRS on my M600 (Unlocked for Vodafone sim)
GPRS has been enabled as I have the G icon up!
I have been on the vodafone website and tried there settings with no luck!
I have been on the Filesaveas website and plugged in all of those settings with NO luck, Have also installed the I-mate .cab again with no luck!!!
I am starting to go insane spent three days trying all different settings and No luck at all!!!!
You name the website and I think Ihave probably tried it.
Does anyone have any useful advise for me, provide me with some form of sanity check!!!!
Ideally I wold love a .cab file to install!
But would like feedback from anyone else in a similar position, on how they resolved this some what annoying issue!!!!
regards
Wilko_007
I set up my Vario II for Vodafone with no problem. These settings (*.pdf file) seem to be the same as the ones I used, see how they compare with the settings you are using.
Many thanks I will give it a go!
Ok have now got connection but I can't surf?
I have seen comments about GPRS beening fully enabled?
Are there 2 forms of GPRS that can be enabled? WAP & WEB???
Do I need to worry about the Dialing Rules???
Thanks in advance for your assistance!!
[/img]
Could you be a little more specific i.e. does it come up with a pop-up box stating that it is connecting to GPRS? If yes, which connection does it say it is connecting to, is it the correct one (i.e. the new GPRS settings that you have just keyed in)? When you say it won't surf, what do you mean exactly ... are you using Pocket IE and does it come up with any error messages etc...
Connection via GPRS No probs I then get the Small G and the two arrows fixed on the bar.
Enter IE and type google for example.
get the status bar flash up breifly and then disapear, with no change to the original Orange World Home page!!!
No errors what so ever????
okay ... the next thing I would probably do then is download an alternative browser to see if it still happens in a different browser. Netfront is pretty good. At least that way you should be able to establish if it is a GPRS problem or a browser problem.
Ok I now have installed Netfront and connected to the GPRS!
typed in www.google.com
I have a warning screen:
Browser Warning
Cannot load Page
Type: DNS no server is specified
?????
Okay .. I am running out of ideas now, it does sound like your GPRS Settings are still wrong.
Click 'start menu', 'settings' and go to the 'Connections' tab. Now click 'Connections', then the 'Advanced' tab then 'Select Networks'. The first box (ie. Programs that connect to the Internet automatically) should say 'My Isp' and if you click 'Edit', it should show you 'Vodafone Internet' is selected.
If you then select to edit that, you should see in this order 'Vodafone Internet' and then it should show modem type as GPRS, next page should show Access Point Name of 'Internet', next page should show User name 'Web' ... password is the same, domain field should be blank ... nothing needs to be done in the advanced tab because the default of 'Use-server-assigned IP address' should automatically be selected, same for the server tab too, default should be server-assigned.
These are the settings that work fine on both my XDA Mini S and my MDA Vario II.
Right I have checked both ISP and MyWork Network, all correct!
The only thing I can see is that the password box has loads of characters (*'s) instead of just 3 *'s for WEB (***)
But every thing else is as the PDF??
Stumped!!!!
you can try messing with the newly released ms network tools there is a link in development forum
or you can try manualy typing in a know dns server in the settings
unless the gprs dont route the request
any dsn server ip will do
same as pc's really
I am afraid I don't know then ... we have reached the level of my knowledge (which isn't high )
Perhaps somebody with a little more technical knowhow on GPRS issues may be able to help you.
Sorry I couldn't get it sorted for you.
Thanks for your help a least I can connect now!!
Thank you again!!
anyone heard of the connection No. being *99#?
Vodafone instructed me to put that in the setup?
I guess that goes in under the " My Work Network" Vodafone Wap - Number?
This is now becoming a huge headache anyone got any ideas?
not sure how vodaphone handle it but i never heard about
ppl having to add numbers when they picked gprs as connection
belived that was only if you connected around grps
Wilko_007 said:
Right I have checked both ISP and MyWork Network, all correct!
The only thing I can see is that the password box has loads of characters (*'s) instead of just 3 *'s for WEB (***).
Click to expand...
Click to collapse
I'm expericening a similar problem.
My phone was sold as an O2 XDA Mini S. My O2 contract/account doesn't allow GPRS (they want me to upgrade) so I tried my Vodafone PAYG SIM and it works without having to have the phone unlocked in any way. By that I mean I can use voice calls and using the settings I've found through this site I can send MMS messages via GPRS but I cannot connect to the internet. I've checked with Vodafone and the account will allow internet and GPRS etc.
The only thing that I can see that is wrong is the password. Whenever I type "web" then finish, it always defaults back to a string of 16 ***'s when I re-check the settings.
I've even done a hard reset and used the corporate install to no avail. I don't want to run any sort of unlocking software if I don't need to as I don't want to create a very expensive door stop.
Any ideas?
The string of asterisks is normal, I think it is just a method used by Windows to make the password more difficult for someone to guess i.e. by disguising not only the characters but also the number of characters.
I just double checked and my fully working settings also show a row of asterisks despite it being a 3 character password.
Thanks Nicky
I'll keep plodding away with this but hopefully someone might steer me in the right direction soon.
;0)

Can connect GPRS,3G but can't see Web..Please Help

Hello guys
I am suffering for a few days on this issue in HK..
I just sim-unlocked my x01ht by M3100v4Unlock from Imei-check(OS is still Japanese), and try to setup my environment one by one.
However one of simple setting to connect by Gprs still has problem..
Please help me if you guys have any idea.
Summary of my situation:
1. GPRS (by Peoples SIM) : can connect but cannot see web site by IE
2. 3G (by CSL SIM) : can connect but cannot see web site by IE
3. Wifi : can connect and no problem to see web site by IE
for case 1&2, IE error message says "Cannot show page, please check the address and try again".
It seems address is not solved into IP address(Like cannot find DNS server)..
howver i still don't have any solution..
Would you please give me some advise for this problem?
Thank you !
go to start>settings>connections>connections>connections>advanced>select networks> and in the drop down list select the connection you are using to access the net.
fone_fanatic
Thank you so much for your quick reply.
I just checked the setting you taught me,
However I found out I already selected the appropriate setting you mentioned.
Normally for WiFi connection I select "My Work Network" &
for 3G/EDGE I select "My ISP Connection".
Also make sure all the APN, username & password correctly enter.
ghz
Thank you for your suggestion.
I checked APN, Username & Password is correctly inputted.
Today I also brought my x01ht to support centre,
let the enginner set up, but still have problem.
when I use this sim on my HP rw6828,actually no problem.
(That mean sim has no problem.)
Thank you
I have a similar problem, see this thread
http://forum.xda-developers.com/showthread.php?t=293494
are you using a cingular ROM?
Hi,
I installed Opera for wm5, then can go to any website now!!
That means IE caused this problem, but don't know exactly what the problem is..also can't find how to update IE..
Anyway, I use opera at this moment.
Thank you so much!
cpz21,
Thank you for your information,
I just deleted the registory you mentioned
then I can connect to any website now.
So everything is clear!!!
Thank you
glad that helped.
I still have the problem...
cpz21,
Sorry, I was so happy by myself.
I'm using genuine softbank japanese version bought in end of Dec.
As I am new in this toy, can't give you good advise at this moment..
Thanks akind. I'm mostly using opera 8.6 right now, or I can restore registry, or just not to sync with home PC (sync at work seems ok)
Sooner or later I will find the reg key
Hi cpz21
Last night I hardreset my device and setup from the beginning.
Of course I deleted the reg key and test IE then no problem.
However, this morning i went to web by IE in subway through gprs, it can't show web page.
Then I arrived office and checked the reg key again, found it still there...
Don't know why it come to be like this..
Just for your information.

Atom Exec in the USA - Please Help Me

I live in the US and have just bought an o2 Atom Exec. I have T-Mobile as my carrier but my Atom can not keep the signal for more than a few minutes at a time. The configuration Wizard can't help because it doesn't show the US as an option. I try to select T-Mobile but even when I am connected it won't show the name of the network. I am very upset - I spent alot of money on this phone but I can't use it. Can someone please help me configure it to connect to the T-Mobile Network?
I also have T-Mobile (USA) and have used these settings on a I-Mate Jam and now an Atom Life. It took me a while to gather this information, but now everything is working perfect. Here are all the network settings:
Connections: My ISP (Start->Settings->Connections)
Add new modem conection-> name->T-Zones
Cellular line (GPRS)
Access point: wap.voicestream.com
User, Pass., Domain: leave blank
Advanced: no change
Connections: My ISP (Start->Settings->Connections)
Add new modem conection-> name->PictureMessaging
Cellular line (GPRS)
Access point: wap.voicestream.com
User, Pass., Domain: leave blank
Advanced: no change
Connections: My Work Network
Set up my Proxy Server: Check both boxes
Proxy Server: 216.155.165.50
Advanced:
HTTP: 216.155.165.50:8080
WAP: 216.155.165.50:9201
Socks: 216.155.165.50:1080
Connections: My Work Network
Add new modem conection-> name->T-Mobile WAP
Cellular line (GPRS)
Access point: wap.voicestream.com
User, Pass., Domain: leave blank
Advanced: no change
This will give you Internet browsing, access to T-Zones (in Internet Explorer the address you need to type is: wsp://wap.myvoicestream.com) and MMS capabilities
For MMS, you also need to set the following:
In Messaging, choose options, then MMS
In the Servers tab, create a new configuration called PictureMessaging
with the following settings:
Gateway: 216.155.165.050
Port: 8080
Server: http://216.155.174.84/servlets/mms
Connect via: My ISP
This should work for any WM device and T-Mobile USA.
Have fun!
You are so cool, frenchygeek. I am very grateful for your reply and all your help. I made all the changes you recommended, except that I can not figure out how to add MMS because in Messaging options MMS is not listed. I can't add it because it requires an email address to add an account. Can you walk me through that?
I also found somewhere in this forum instructions to make a registry entry to change the default network to my local network. Now it no longer comes up trying to run the Wizard (with my default as Austraila with every soft reset. Do you need that information? (I am in my office but once I am home I can send it if you like.)
Anyway, I made some of these changes earlier today and the ones above just 5 minutes ago ... so now I'll see what happens. Thank you SOOOO much.
Susan
[email protected]
Cinamon,
Go to Start->Messaging or Start->Programs->Messaging or click on the Messaging line on the "Today" screen.
When in there, you may have a selection screen with the various messaging options you may have such as Text Message, MMS, Outlook or your corporate or personal email. Click on MMS. If you don't have this screen, then go to the next step.
Click on Menu->Tools->Options
At the screen which says "Tap an account to change settings", click on MMS. You will see 4 tabs (Preferences, Blacklist, Servers, About). Go to the server tab and make the changes that I outlined in my previous post. Accept everything, close and do a soft reset.
Voila!
BTW, yes, I would be interested in the information regarding the change on the register to place T-Mobile as a default provider. I never got around to do that.
Merci beaucoup.
Hi again, FrenchyGeek,
I'm so grateful to you - I have been begging for help from the manufacturer and the distributor but you and the other forum member are the only two sources of help I've had. Seems like someone else would be desparate for this information too.
I'm still not sure about MMS - MMS does not show up in options on my phone. I finally got to the MMS settings screen by going to the messaging screen of one of my email accounts, clicking on GOTO, choosing MMS (it does appear there) and then choosing tools -> options. It is not set up as yours is - I have to fill in :
Active Profile (A dropdown but I choose NEW)
From there I have to fill in
Profile Name:
MMSC: I typed in http://216.155.174.84/servlets/mms
Data Connection: (a drop down and I choose T Mobile)
Gateway: (a drop down with only WAP1.0 Gateway and WAP2.0 Gateway to choose from)
IP Address: (I typed in 216.155.174.84)
Port: (I typed in 8080)
Do you think that will work?
OK, default networkconfiguration:
In the HKCU/AutoConfig/Network, find XPath string n change it to your network operator number. You can see your operator number (5 digits usually - mine was 31026) when you launch autoconfig, next to the "Detected from SIM" text. You can also see the operator number from the DetectNet or NetworkID keys in HKCU/AutoConfig/Network.
I still have trouble with it dropping signal or trying to connect to Australia. I wonder if there is anyway to delete all the overseas configurations so it can't find them again. Also, I drop signal everytime I connect via USB to my PC. Do you have these issues?
Another annoyance - the battery doesn't last long for me at all - I am definitely a power user, which is why I wanted the higher processing speed which lead me to the Atom Exec in the first place. Are there any extended batteries that you're aware of?
Thanks alot!
Susan
Thanks again.
Hello Cinamon,
I am using the new O2 Atom Life and I installed the WM6 ROM upgrade. Are you still on WM5? That may explain the differences, although I'm not sure why the MMS profile doesn't show up on yours.
The screen where you can find this is the first screen that shows up when you click on "Options" in "Messaging". It says "Options" at the top, "Tap an account to change settings" below, with a square containing "New Account...", "Text Messages", "MMS", "Outlook E-Mail", and possibly other accounts if you set them up yourself. Below are two buttons: "Security..." and "Signature...". The only way to properly set up MMS is to click "MMS" on this screen and then follow the procedure in my previous posts.
I also have an "Autoconfigurator" which shows the countries that are supported (Australia, Bahrain, China, etc.) but it doesn't launch automatically. When you go through a hard reset, it asks you if you want to run it, but you have the option to say no. After that, it doesn't come back. If it's in the ROM, I don't think you can delete it.
I don't have any of the problems you outlined. My phone actually works really well, except for one major flaw. I don't get the voicemail notification icon to show up when I have a new voicemail. I only get the missed call icon (if my phone is on). I opened a separate thread on this site but got no help so far. By searching on this site and others, I can tell that some WM phones have such a problem depending on the Tel-Co, but I can't seem to find the solution. Do you have any problem with that feature?
If you Google "O2 Atom battery", you can find after market batteries that actually provide longer charge. They void the warranty, so be careful.
Thanks for the default network configuration! What software do you use to edit the registry?
Take care!
Still No Luck
Hi Frenchygeek,
I have no problem with voicemail (on the few times my phone connects).
I use SKTools for editing the registry. Sometimes I use a freeware register editor which can only be used from your PC - I can send you that if you like. I know alot of people use Commander (also Freeware) but for me these two programs are more friendly, and SKTools has lots of tweaks and other cool utilities.
My phone is the Atom Exec and there is no update at the moment for WM6 so I am stuck with WM5. I can not get my phone to stay connected for more than 5 minutes at a time. It drops the line over and over again and is really unusable (except for games and mp3s etc ... smile ....) I thought I might reset to factory settings and begin again with your instructions but I can't find the option to do a hard reset - do you know how to do that? I am very frustrated as it was expensive and it's useless to me as is. I asked the seller if I could exchange or upgrade it and I'm waiting for his answer. Maybe the Life with WM6 would do the trick. Anyway, I have had no service at all for about 6 hours although I have tried every trick in the book and then some. Are you using code 31026 or are you in a different region in the US? (I am in Virginia)
Thanks again for your help.
Susan
Hey,
To hard reset, you need to press the stylus in the reset hole at the bottom of the phone while you press on the on/off button. Keep it this way until you see a message on the screen, which asks you to confirm the hard reset by pressing the green and red button simultaneously.
I think that it will do the trick. My Atom Life works perfectly fine with T-Mobile. I'm in California and my Tel-Co number is also 31026. It shows up on the Auto Configurator screen ("Detected from SIM: 31026").
If it wasn't for the lack of voicemail notification icon, I would be happy. I'm tempted to reinstall WM5 and see if that makes a difference. But I read that WM6 is so much better than WM5, so I really don't know what to do. Support at O2 basically gave me the finger. They said their phones are intended for the Asian Market...
Anyway, the Atom Life is a more recent phone compared to the Exec. It's a little bigger, but the specs are much better. It's much more expensive though...(I paid a little over $800 for mine).
Have fun!
Hello Again FrenchyGeek,
I did a hard reset and put all the settings in that you gave me, reset the autoconfig to 31026, and things are much better. I still lose signal a few times every hour but it does usually recover quickly, although there are times when I have to manually search for the signal as the phone doesn't do the search itself.
I do need to do something about the battery, however, and will follow your suggestion. I use the phone as an MP3 player and the battery drains in a couple of hours.
It must be frustrating that no one can help you with the voice mail problem. My voicemail notification works perfectly. Wish I could help. If you can think of a way for me to search my registry for the right setting let me know and I'll give it a try.
I still don't understand why the O2 company is not more responsive to us Americans .... it's a big market for them to tap into.
Susan
Hi Cinamon,
Just got an idea for the problem you're experiencing.
Under Start->Settings->Connections, I have a program called Band Switch.
In there you can select your network type: Auto, GSM, UTMS
And you can select your Band: Any, GSM 900, GSM 1800, GSM 1900, UMTS 1900 and UMTS 2100.
If you have such a program, try to play around with the settings and see if it makes a difference. It's possible that you when you lose the signal temporarily the phone gets lost. If you force it to a certain band, then it might be more stable.
I don't know for sure, but it's worth a try.
Cheers
Hi Frencygeek,
I do have such a setting and I have repeatedly set it to 1900 (because that's what T-Mobile operates on) but it continually resets itself to tri-band. I wonder if anyone here can tell me how to make 1900 the default. I notice that it connects to GPRS but I have no phone service - although I can check my email and browse the web. In those cases I have to manually go into settings and tell it to connect to t-zones under my ISP. I think somehow it is defaulting to the YES OPUS settings of Australia everytime it loses signal, and I don't know how to direct it to my settings. Maybe I should try a new thread and see if anyone can help, although it does seem that support for those of us in the Western Hemisphere is sadly lacking.
As for your voice mail, I'm sure this is too obvious to suggest, but have you tried changing the notification type? Maybe a different ringtone or change to vibrate or play with that? Strange that is the one feature that works for me - but I certainly need it since no one can call me at least 50% of the time.
I do own an MDA and if I were not so hard headed I would use that ... but I'm having a hard time giving up as I do like the phone (and did spend $500 on it, although it came with extras like a miniSD card, bluetooth headset, etc.
Hello Cinamon,
Someone else in another thread suggested that I upgrade the Radio Rom to version 2.69.11 or 2.19.11. I have done some research and found that it should work with T-Mobile. The only problem is, I don't know where to find a radio rom that will work with my Atom Life and I don't know how to install it. I have read too many horrors stories about people "bricking" their phone after trying to flash their ROM. So, I'm a little hesitant, but I would do it if someone answer both my questions. Also, I don't know what version of radio rom I have. On WM6, System information looks different. My Radio version says: "AL1-KLNC-2.3.40CT-070424-2. I have no idea what that means.
Which brings me to my other suggestion for your problem. Maybe you could update your radio rom and things might just start working for you. Just a suggestion!
Hmmm .... I'm willing to try ... but how do I find an upgrade for my Radio Rom? I see there is an upgrade for the Atom Exec - in Chinise only. ;->
Any luck with voicemail?
Hi Again,
I have tried the band but still I lose signal much too often and it still takes forever to establish a connection again. Worse, it often shows the E in the top bar, which makes me think I have phone service, only to discover that I have only GPRS and have missed a bunch of calls. I contacted the person I bought it from and asked for an exchange - he does not sell the Life but I offered to pay the difference to upgrade to the Orbit, which has a quad band. I'm still awaiting his reply.
Any luck with your voice mail?
Susan
hi cin,
the o2 atom exec are only tri band gsm. i live in apac and had a similar problem over here when i bought a smartphone in the US. it was because carriers still prefer the lower frequency gsm as a default. coverage for the higher freq was spotty for me even when i forced a freq. check with t mobile
by the way, i have an atom exec and when i am in the US i am on cingular and have no issues with dropping. sorry.

Proxy data

Hello,
I have a problem with my P3600. I need to use a proxy-setting when I connect to my office network via WiFi. I have the necessary data (i.e. IP address and port number) and it works flawlessly on my old HTC Wizard. However, on my new P3600 the http proxy data keep disappearing each time I leave the settings and connect to the network. The connection is apparently fine but I cannot get any data through.
Regardless how I enter the data, they are gone the next time I check. By the way, it appears that (at least under some circumstances) the SOCKs proxy data are remembered!???
I have tried all combinations of settings I can think of and I am slowly suspecting that something is wrong with the phone. Nevertheless, I've noticed that other people have had similar problems. Unfortunately I've seen no solution yet.
At home, where I use no proxy, everything works fine.
I assume that the P3600 simply "forgets" (doesn't save and doesn't use) the http proxy data and that this is the reason for my problems. But why does that happen? As said, it works well on my old HTC Wizard when I enter the same data in the same places.
This problem is highly annoying, so any help would be highly appreciated.
Fyi, I am using the generic German version HTC P3600 in German language.
Hi,
am I really the only one in here having this problem? Someone here claims, it is a known bug: http://www.mobileplanet.com/ft.aspx?k=99497&page=1
Is it likely that the problem will be solved if I flash a WM6?
Anyway, isn't there a kind of work-around for this problem in WM5/P3600? If people can port and cook a WM6 from another device and do complicated programs etc., I would assume that fixing the proxy-problem with some sort of patch should be relatively easy. But of course, if one doesn't have the problem himself, one doesn't have much motivation to look at it (I am not complaining, but unfortunately I neither have the time nor the skills for solving the problem myself).
V
Same Problem
I <V>
You are not alone, I have exactly the same problem.
I haven't found solution or workaround.
ROM Mary 2.0
Regards
lula6894 said:
I <V>
You are not alone, I have exactly the same problem.
I haven't found solution or workaround.
ROM Mary 2.0
Regards
Click to expand...
Click to collapse
And the same here, with the original HTC asia rom. Not solution found...
A big problem for me
In my company, we use proxy , I can´t use my super P3600 because it don´t remenber the Proxy. Incredible!!
WM5 Spanis version.
There are some one with WM6 that can confirm if it works with that version.?
Thanks
There is a solution -Kinda!
I have found that if there are two networks, ie one for your GPRS and the second for your "My Work Network" then it remembers your proxy settings This is as close as I have got to a solution.
Cheers
The problem has been SOLVED!
Dear all,
As pointed out above, it appears that the Trinity cannot save/use http proxy data as long as there is no other connection defined. I can now confirm that if you define (even a fake) connection to, say, a GPRS provider, the P3600 will remember your proxy data in the WiFi setting. Weird, but it works ;-)
Thank you so much for this hint.
Best regards,
>V<
Found another solution
Hi,
I tried the solution proposed, creating a fake connection, and sometimes it worked, but others no.
I have found what happens: Activesync changes one registry key, the corresponding to the Work connection via http, in my case:
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{EF097F4C-DC4B-4c98-8FF6-AEF805DC0E8E}\HTTP-{18AD9FBD-F716-ACB6-FD8A-1965DB95B814}]
"Type"=dword:00000001
from 1 to 0, and with this value the PDA doesn't read correctly another value:
"Proxy"="my.proxy.server:3128"
although it is correctly informed.
The solution I have implemented is to execute a script (made with SKschema, which I use for another automatisations), that changes this value after a sync has been finished. This is automatically done creating a notification with Memmaid.
Now after the first unsuccessfull sync, the key is updated and it works like a charm.
You DID it!
I could confirmed that by changing the type from 0 to 1 did the trick as mentioned by Rodaldfa! It works immediately after modification! Type=0 means "disable this proxy" and Type=1 means "Http proxy".
However, I don't think it's Activesync which reset this value to 0. I had done various times of AS after setting the Type=1 with regedit, and it always maintain Type=1. But if I enter then exit the comm manager, it resets the Type=0 on exit.
The procedure is to set all proxy info (include passwd...) then exit Comm Manager (CM), then use any regedit to modify the Type value. Then NEVER go back to CM afterward...
Thus, I suggest modify type to 1 then avoid entering CM. AS works just fine for me...
I am using HTC Tytn II (Kaiser) with WM 6.0 in Traditional Chinese.

tmobile connection settings

Hi
Can anyone help a novice here?
I have recently upgraded my ameo to WM6.
In the process I lost all my connection settings for tmobile.
I have a web n walk sim but just cannot get the connection correct.
Also for some reason i no longer receive text messages so cannot use the tmobile link to "send settings" to ameo.
Please please help
Thanks
Alan
alanjb123 said:
Hi
Can anyone help a novice here?
I have recently upgraded my ameo to WM6.
In the process I lost all my connection settings for tmobile.
I have a web n walk sim but just cannot get the connection correct.
Also for some reason i no longer receive text messages so cannot use the tmobile link to "send settings" to ameo.
Please please help
Thanks
Alan
Click to expand...
Click to collapse
The tmobile settings can be found by searching the forums - they are in a few places.
Which ROM did you use - most now include the Network Wizard which will run automatically after upgrade. If not it is at Start\Settings\Connections. That will insert the correct settings for you.
Hi
Thanks for the quick reply.
ROM Version - 2.20.405.1
ROM Date - 06/21/07
Radio Version - 1.32.00.00
ExtROM - 2.20.405.101
Yes the Network Wizard is there and it puts the settings in but to no avail.
The 3G logo comes up and i have 4 bars to show high signal strength but whenever i try to connect to the net it says the modem you are connecting to has dropped the connection.
Can anyone point me to the correct thread?
Thanks
Alan
One more thing I did upgrade to real vga 128dpi
in connection settings change user name from
t-mobile to user
alanjb123 said:
Hi
Thanks for the quick reply.
ROM Version - 2.20.405.1
ROM Date - 06/21/07
Radio Version - 1.32.00.00
ExtROM - 2.20.405.101
Yes the Network Wizard is there and it puts the settings in but to no avail.
The 3G logo comes up and i have 4 bars to show high signal strength but whenever i try to connect to the net it says the modem you are connecting to has dropped the connection.
Can anyone point me to the correct thread?
Thanks
Alan
Click to expand...
Click to collapse
The connections settings are correct using the Network Wizard. The problem you are having may actually be a network problem. I get this from time to time with T-mobile UK - I will get this message for a couple of hours and it will then just stop (it often stops more quickly if I am on the move which I assume is becuase I am moving cells)
How do you mean you are 'no longer receiving texts'? is this a common request to cusomer services!?
Anyway as far as I know you cannot have settings sent by text to the Ameo, or any windows mobile device - you have to input them manually or use the settings wizard.
Try going on settings/phone/band and change to GSM - see if you still fail to get a connection. If so try upgrading your radio, then reflashing.
If this fails try another t-mobile SIM in the Ameo.
Your error is not one I have ever come across on T-Mobile uk using my Ameo.
T-Mobile settings:
Start - Settings - Connection - Connection - Under my ISP click on Manage Existing Conn.
Delete all connections in there, and click on Proxy at the bottom and remove the tick on this network requires Proxy.
Create a new connection:
Cell Line (GPRS)
Access Point: general.t-mobile.uk
Username: user
Password: pass
No DNS, no IP, no proxy.
Save and soft reset.
Good luck.
Thanks everyone!
Eventually got this sorted.
Works like a dream now
Reflashed, used the wizard and all is well in the world.
Is anyone having a problem with media player?
Every time I launch media player the ameo crashes (as in locks).
Thanks again
Alan
alanjb123 said:
Is anyone having a problem with media player?
Every time I launch media player the ameo crashes (as in locks).
Thanks again
Alan
Click to expand...
Click to collapse
Check your other thread - I've answered the problem there.
Post deleted
spacecat said:
in connection settings change user name from
t-mobile to user
Click to expand...
Click to collapse
Current T-mob phones are coming out with USER as t-mobile, however, user still seems to work.
PASSWORD- pass
APN- general.t-mobile.uk
Again some units come with a Proxy pre installed (My N95 did)-
149.254.201.132
Proxy port- 8080
If this doesn't work then use without.
Also try a DNS server setting-
DNS 4.2.2.1
Alt DNS 4.2.2.2

Categories

Resources