Hi,
I have a Universal / Qtek 9000. When i go to device information so it does not show Readio Version & Protocol Version. It is impossible to upgrade radio and protocol version? Wich tool to use?
I have already tried to hard reset and when try to upgrade so it gives country id error.
Regards,
Saleem
you can get round the country id error, there is a tool available.
just do a search on this forum
Related
Hello,
I have purchased just last week T-mobile pocket PC in the US, however now I am back at my home (Eastern Europe) where we use GSM (Alcatel)
The following is rom and radio version:
Rom version: 3.14.40 ENG
ROM date: 11/26/02
Radio Version: 6.18
Protocol version: 324e4
My question is what do I need to unlock this to work with my GSM company. When I paid for this ($625) I paid a phone withouth service activation.
Regards,
Bucky
Hy.
Why don't you try this question in the unlocking-section?
Why don't you read the other tasks in this section?
To unlock your T-Mobile pocket PC you need a serial cable to connect your PC with your PDA and the XDA-Manipulator-software from www.xda-developers.com
An other problem that exists will be the different GSM frequencies. As you have in USA 1900MHz you'll have in europe 900/1800Mhz. But i'm not sure if this is really so. You have to take a look at your provider (Alcatel)
Regards
Stefan
Stefan, thank you very much for your prompt reply.
However, I have been reading that the unlocked versions of T-mobile
had a Radio Version 3* or 4*, and the RADIO VERISION on my T-mobile is 6.18, thus I am not sure if this software will work out or not.
Please reply as soon as possible if you know the answer to this one.
Hey Bucky.
Most people hav Radio VErsion 3* oder 4* becuase this are european Radio Versions.
The US VErsions have othe numbers like your 6* .....
Like the posting of a XDA Developer the manipulater should work with all available Radio VErsions.
Just try it......
I see. However when I read the xda manipulator, the developers say that they have tried this only on radio version 4.06 and 4.10
Quote: " We've tested this on Radio version 4.06 and 4.10. If you dare, please let us know if you find it to work on other radio versions".
I didn't find any message that someone tried with Radio version 6.18
Do you know anyone that has tried this on US versions of T-mobile?
We have reports of succesful unlocking on US versions as well. XDAmanipulator will work with any radio version.
Peter
Hey just to add I have been one of them. You have pretty much all the same settings as mine. Just follow the instruction on the manipulators site and it will work fine. You will be done in seconds.
hello
i have T-Mobil pocket Pc
Model# PW 10B1
Rom Version 3.14.40
Radio Verison 6.18
Protocol Verison 324e4
when i connect to my serial port to unlock the phone using this software
XDA-developers Special Edition ROM the phone gives me a message that the Communication port not open or it is used by another conncetion i looked every where can't work it can some body tell me step by step directions i will be much glade thankx.
i know that this is old stuff but i cant find what i need (i am new at this) sorry!
from what i found i have a wallaby (pw10b1) that i want to unlock. it was purchased from tmobile usa and my account with them has been closed for over a year. i am with cingular and want to use this device. i downloaded xdaunlock.exe loaded it using hotsync, clicked on it and get "error getting unlock code" here is what i have:
rom version: 3.14.40 eng
rom date: 11/26/02
radio version 6.18
protocol version: 324e4
what do i need to do to unlock this thing?
You need a newer ROM including the wmodem function.
Easiest was is downloading XDA Special Edition ROM 1.2 and install it on your device.
This ROM is based on 3.17.03 includes WModem, the unlock-tool and some other nice applications....
HTH
Stefan
Thank you for the info. I am downloading it now.
Hello
I recently bought a MDA from eBay.co.uk (item 6370487252), it was described as unlocked BUT I have not been able to pickup any Network (i have tried all 4). Can some one Please have a look at the Details below and let me know if there is any possible way of making this work on ANY Uk Network :?: (GSM 900 or 1800)... I have tried to change it in the phone settings and also Tried to select GSM 900 from the Bootloader Menu BUT to No Avail...
---------------------------------------------------
Details
----------------------------------------------------
Rom Version - 4.01.16 ENG
Rom Date : 02/04/04
Radio Version - 6.25.02
Protocol Ver : 324e4
----------------------------------------------------
Hardware : PW10B1
Platform : Pocket PC 2003
---------------------------------------------------
Please reply IF you can help at all.... Many Thanks in Advance :?
Not sure if i really could help you. But your model is PW10B1 so you can only use 900/1900 GSM networks. There is no possibility to get it working on 1800.
Maybe this causes your problems...
Stefan
just flash to RSU Version 4.21-900-1800 and in GSM boot menu select 900-1800
redsonnic said:
just flash to RSU Version 4.21-900-1800 and in GSM boot menu select 900-1800
Click to expand...
Click to collapse
That would be a bad idea.
The Radio Stack depends on the hardware version. Since he has a PW10B modell, the device is just designed for 900/1900 Networks....
Flashing the 4.21could set the device as a paperweight...
Stefan
I've searched for this and not found anything stating what it is.. When I look in the Device Information, Version tab I see:
Operator Version: 14.123.1.614
ROM Version: 1.23.61.4
ROM DATE: 07/13/06
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
From what I have read here others don't have an Operator Version (my device is an Orange UK SPV M3100) so I was just wondering what this related too? Would flashing another ROM fully remove this and is it something that would be beneficial?
(The radio verison is 1.16.00.00 because i used pof's unlocker and superCID which upgraded the radio from the Orange default)
On a side note.. I searched the hermes forum for "Operator Version" to try and find the answer but the results link only to threads which contain the terms and not to the specific posts in the thread containing those terms.. is there some way to jump to the specific posts as i couldnt see an easy way of finding that information?
It is the ExtROM version.