I have an XDA 2i I'm wanting to put the blackberry client on for use with O2's blackberry services.
As I understand it the latest o2 rom supports this, however I'd like to use it without all the rubbish that comes with it. Is there a custom rom available that covers what I'm after?
goto
ftp://xda:[email protected]/Uploads/Alpine/Extended ROMs
get this cab file inside this folder 'o2 Extended_ROM (English v1.11.171)'
BBConnect_HTC_PocketPC_BB_English_2.0.1.44-48.cab
Install it, and you have your Black Berry
no rom upgrades needed? just running the cab file will work?
-Yes.of course
if so, the camera pathces will also work running the cab filles?
Related
Hi All
I am new to this forum and wanted to upgrade my Asian XDA to WM2003. I try to download the rom in Yorch.net but it doesnt seem to work at all. However i did find this T-mobile ROM Windows Mobile 2003
upgrade 4.00.21. Does this version work for Singapore Singtel Network? Or am i missing something here? I have read most of the forum here and is still quite confused. Can anyone here give a step by step guide on how to upgrade to WM2003 (which version) for ASIAN (especially Singapore) XDA? Pls share your experience.
hi rchtan
If you have not done so yet get the latest official upgrade for yr region and flash the radio this will give you "always on connection" and better stability.
Record all yr network settings as you will need to enter again after.
For WM2k3 Just get the 4.00.05 rom forget the higher numbers as its just the telco adjusting for their particular network and likely to cause more instability if you are not on Tmobile.
Get the installer EXE version and just click on it to install from yr desk top.
Make sure you are connected to activesync and switch off yr radio in case of incoming calls. You can add the extra progs avoiding the ppc2002 marked, forget the imov messanger(Jeff's never worked) you can get a working version fm their web site.
Hope this helps.
Hi alqwerty
Thanks for your reply. Another question which might seem stupid. How do we cook a ROM? I went to this link http://kitchen.romanweb.com/kitchen/index.php and if i left the "Add software and modify ROM" as click, there a big red warning sign "OVERLOAD"??!! Is it okay if i just download the base rom?
Hi rchtan
Start with clicking on 4.00.05 ENG ppc2003.
Then move from top to bottom clicking on what progs you need and unclicking those that you dont want(especially unclick all the ppc2002 marked ones). until the overload sign goes away. Then click on
installer EXE then click on build rom now. When its
cooked download the rom. Good luck
OK, i have finally taken the plunge and got a working ROM dump from my v1640. I have tested this rom, and it can be flashed back and it works (includeds the extended rom and version 1.09.00 radio).
If anyone wants this ROM, please post here and i will upload it to the FTP (I don't want to go wasting space on the FTP site, or my upload allowance if no-one is going to use it)
I know that this is an older ROM, but with all the new ROMs from other providers out, and the lack of one from Vodafone, i know that some people will be wanting to upgrade to a new ROM, but will be wary to do so without the option to go back to original. There may also be people who want to experiment and see how this rom performs compared to other ROMs.
I also have the ms_.nbf file for the extended rom if anyone wants it seperately.
Great,
I'm really interested. In fact I'mplanning to upgrade my v1640 ITalian version and I'd like to have a backup.
I assume your image is the English one.
Could you send to me an howto dump my Italian image?
Or maybe I can try with some product like sprite clone?
Thank you
Lupick
OK, basically i have outlined the procedure below (thanks to buzzdev and this site for all the great information)
First, you need a "host" rom upgrade to butcher. what you need to do is use winzip to unpack the exe into a file. you can delete the nk.nbf that is extracted.
http://buzzdev.net/component/option...view/id,8573/catid,33/limit,15/limitstart,30/
I used these instructions to dump the rom (its pdocread that you need, so the rapi enable cab)
http://buzzdev.net/content/view/65/115/
I used this to encode the ROM to nk.nbf
You will need to set version and operator code (Voda_001)
http://buzzdev.net/content/view/63/45/
I also unlocked the extended rom, and then decoded the extended rom (ms_.nbf) in the qtek flasher that i was butchering and replaced all the files in the qtek extended rom with all the files from the vodafone extended rom (ms_.nbf).
I also added the 1.09.00 radio image to my sollection of files, just so that the upgrade was in there.
Finally, to make it work, i used the MaUpgradeUt_noID.exe to allow me to flash it.
This should give you a working rom, and will also give you the extended rom as a file that you can inject into another operators upgrade utility to have all the nice vodafone settings
Hi
I've been trying to get Vodafone live working on my Jasjar
does the V1640 Rom allow for Vodafone live ?
In that case i would be interested else i'll just wait for the Official Vodafone Live Update
Has anyone else had some luck with VLive?
Unluckilly, i have not got LIve working fully. i have however got it working partially and you do not require the voda rom to do it.
HeliosFA said:
For voda in UK (maybe same for other countries), there are 2 connections required - one for internet, and one for wap. You need the connection details for both (set wap as the default work connection and internet as ISP)
the url for live is wsp://live.vodafone.com
Click to expand...
Click to collapse
You will also need to setup the 2 connections as follows (the WAP one is NOT setup by the extended rom cab)
HelioFA said:
"ISP" connection
APN - internet
User and pass - web
"Work connection" (For vodafone live)
APN - wap.vodafone.co.uk
User & pass - wap
Proxy - HTTP - 212.183.137.12:8799
Proxy - WAP - 212.193.137.12:9201
Proxy - Socks - 212.193.137.12:1080
Proxy settings are required for the "Work" connection
Click to expand...
Click to collapse
Hello,
Does the extended ROM file have settings for Vodafone SPAIN? for MMS, Vodafone, Live 3G Settings?
Hi
On the New Imate Rom the South Africa Settings for Vodacom Live called vlive! is on the rom but it seems incorrect.
You cannot even connect to 3G or Wap using those settings. We had to re-install the previous Vodacom CAB file to get 3G connectivity working
I took the South AFrican settings of a Nokia 6680 (which connects) and set it up on my Jasjar without success then it's the same I cannot connect
They may just have a setting if Phone=JasJar then access=NOHighWAY Option on their APN
We tried the same settings on a HSDPA card and the same happened but we saw that the vlive! exclamation mark gets lost
Personally i think it's a way to block "unwanted" machines and PC's to access their content as people may be able to copy it, using anything other than a Joda-phone ... :roll:
Yes please
I'd like access to the original ROM so if you could upload it that would be great.
OK, gonna zip it and upload it tonight. it will be in the XDA FTP and will be labeled
Pls send me the htp so I can use it too thk you. by the way it wont make my phone lock the signal back again right ? cause now it is unluck to use with any carrier
Dear Heliosfa,
could I have one copy of your V1640 Vodafone UK original ROM ?
I'm so desperated because my old V1640, at this moment, run only in the "bootloader mode" and, if I try to install any coocked ROM not original,the installation stopped at 7% (max 8%) .
Thanks for your help .
Excuse me for my english .
Michele Reale from Campobasso-Italy-
Hi,
Can anyone advise on how to get Blackberry Connect onto my IMate Jam?
It is still running the ROM Pak that came with it and is on Vodafone?
Thanks,
Dave
Windows Mobile 2003 Push mail
Unfortunately i'm not really into blackberry, but i know that windows mobile 2003 devices (such as your JAM) are not compatible with pushmail technology. Microsoft released the MSFP for Windows Mobile 5 devices...
I believe the latest t-mobile uk rom has blackberry connect as part of it. did you check with vodafone to see if they have a bb rom for the vpa-compact?
I realy interested in this topic...
Does anyone knows is there's posiblity to use my magician to connect with blackberry...?
i really2 happy if my magician can being use for my blackberry SIM card, rather than with the other Blackberry handheld that i had...
Does anyone can give me a clue..?
YES Im Using T-Mobile's Latest MDA Compact ROM (Version 1.13) can be downloaded at their website, or go here if you lazy to search 8)
http://t-mobile.iris-global.com/download_manager_mda_com.html
Inside the ROM has already provided Blackberry support. I havent tried them, though. 8)
Anybody success with it, pls share your experience.
i can't install this ROM to my XDA mini.
the installation process said that country ID error.
anyone can help me to prevent this country ID error ? maybe i should unlock it first but i dont know how...
or maybe anyone have the nk.nbf, ms.nbf and radio.nbf files in another words "the extracted ROM"
Anyone know where I can find the above.
Have got an XDA Exec running WM6, but will be getting a new simcard from T-Mobile over next few days, and no doubt there will be a few cabs I need from the ExtROM.
Thanks
If you're running WM6 then there's not much point using the apps/settings off the T-Mo extrom. If you really really want it, just download the ROM package off the T-Mobile site and use winrar to pull the ext romout.
Also there's one on the ftp archive but I think it's actually quite old. Check it anyway.
FYI The current T-Mobile Image is on: http://www.tm-phonedownloads.com/download_manager_mda_pro.html
file:
http://www.tm-phonedownloads.com/files/UNI_TMUK_130114_130232_11003_WWE_BL101_Ship.exe
Many thanks for the replies
Hi there, im looking to put Touchflo on my o2 Orbit but have no idea where to begin so would love a simple step by step guide to doing so, if that is possible.
But any help would be much appreiciated.
You cant just add touchflo to your phone. It has to be in the rom already. Therefore you need to download & use one of the various roms available on these furums - i currently use Meschles latest Touch 4.01 rom.
Just find a cab file, try FTP.