Related
I recently moved into a new ‘cell phone death trap’ apartment (apt).
I’ve seen my phone connect, I’m guessing; connect to four different cell towers from my apt. I’ve sat and watched it go from 2 bar E, disconnect, to 1 bar G, disconnect, to no bars 3G, disconnect, and so on….
But here’s the clincher…
Sometimes it will also connect to a full strength edge network, but it indicates it’s roaming by the Triangle icon. Now if I’m on that ‘Triangle” network, my phone works great, meaning I actually can make and receive calls!
But, I’m guessing again, because it shows it is roaming; it also does not like to stay connected to this network. Actually it prefers to switch itself back onto a weak edge network without any signal.
My phone battery doesn’t last more than five hours, NOT TALKING, just in standby because it is constantly switching towers.
At this point I want to throw my Hermes out a window! But I know that wont do any good, because anyone else who come to my apt and has AT&T/Cingular gets the same results.
So here’s my question:
“Can I force my phone to stay on a particular cell tower?”
If so, I love you….
you should re-post over in this thread Daniel's software might be able to solve your problem (or Daniel might have other ideas).
thank you for the suggestion. i tried that and he said, "Sorry nop. It isnt the pourpose of cmp or bs...."
I don't think you can force to a specific tower but you can force to a particular provider:
START/SETTINGS/PHONE/NETWORK/MANUAL
and also select whether you want to force GSM/WCDMA and the GSM/UNTS band:
START/SETTINGS/PHONE/BAND
Maybe by going this route you can lock onto a reasonable signal.
2 other alternatives... Sell the appartment... Buy a landline and donate the Hermes to me
taze said:
I recently moved into a new ‘cell phone death trap’ apartment (apt).
I’ve seen my phone connect, I’m guessing; connect to four different cell towers from my apt. I’ve sat and watched it go from 2 bar E, disconnect, to 1 bar G, disconnect, to no bars 3G, disconnect, and so on….
But here’s the clincher…
Sometimes it will also connect to a full strength edge network, but it indicates it’s roaming by the Triangle icon. Now if I’m on that ‘Triangle” network, my phone works great, meaning I actually can make and receive calls!
But, I’m guessing again, because it shows it is roaming; it also does not like to stay connected to this network. Actually it prefers to switch itself back onto a weak edge network without any signal.
My phone battery doesn’t last more than five hours, NOT TALKING, just in standby because it is constantly switching towers.
At this point I want to throw my Hermes out a window! But I know that wont do any good, because anyone else who come to my apt and has AT&T/Cingular gets the same results.
So here’s my question:
“Can I force my phone to stay on a particular cell tower?”
If so, I love you….
Click to expand...
Click to collapse
Are you able to change networks?
Are you able to ask your service provider the location of the towers and if they're planning either any upgrades or any more in the area?
If not you may wish to consider the first point, changing service providers.
I know what a pain it can be to have little or no service when needed. Personally, here in the UK, I'm on Orange. Where I lived in Wales it was either Orange or Vodafone that has a decent signal. When I'm out and about with work those are the two popular towers with o2 creeping up and some others too, but for the most part those are the strongest.
I don't, I'm sorry, have any better advice for you. Apart from leave your Hermes on charge when you're home near a window (safely) and carry a bluetooth earpeice around instead Good Luck with your Valiant Quest
ach2 said:
I don't think you can force to a specific tower but you can force to a particular provider:
START/SETTINGS/PHONE/NETWORK/MANUAL
Click to expand...
Click to collapse
i went to that tab and all i have is a Find Network button, which does nothing...no manual option
ach2 said:
and also select whether you want to force GSM/WCDMA and the GSM/UNTS band:
START/SETTINGS/PHONE/BAND
Maybe by going this route you can lock onto a reasonable signal.
Click to expand...
Click to collapse
I've tried this method as well and it does not help. apparently both the good and the band networks all fall under GSM(900+1800)+UMTS(2100). The other two band options never find a network.
ach2 said:
2 other alternatives... Sell the apartment... Buy a landline and donate the Hermes to me
Click to expand...
Click to collapse
I'll consider it....thank you for your suggestions, I REALLY APPERCIATE ANYONES (constructive) FEEDBACK.
Elwyn M3100 said:
Are you able to change networks?
Are you able to ask your service provider the location of the towers and if they're planning either any upgrades or any more in the area?
If not you may wish to consider the first point, changing service providers.
I know what a pain it can be to have little or no service when needed. Personally, here in the UK, I'm on Orange. Where I lived in Wales it was either Orange or Vodafone that has a decent signal. When I'm out and about with work those are the two popular towers with o2 creeping up and some others too, but for the most part those are the strongest.
I don't, I'm sorry, have any better advice for you. Apart from leave your Hermes on charge when you're home near a window (safely) and carry a bluetooth earpeice around instead. Good Luck with your Valiant Quest
Click to expand...
Click to collapse
Thank you for your suggestions. Unfortuantly im locked in a 2yr contract, thats how ****ty american cell phone companies do things. Plus, the better providers in the area dont use SIM cards (ie. Sprint/Verizon), so that would mean bye bye Hermes.
Ill will go by the Cingular store and ask about the possible service upgrade, but those fools dont really know whats what, thats why im on xda-dev!
I like the bluetooth idea, ill try find a "sweet spot" in the apt and try that method. Thanks again!
"I have dream..."
My idea just seems possible, however i cant program so who am i too.....
The idea of having blocked cell id numbers. If i could FieldTest or somehow extract the cell ids from the towers i dont want, then create a file that the phone checks against before joining a tower.....
I dont know, just a dream i suppose...
In both cases (roaming and not) are you registered in same operator?
If you're having a difficult time maintaining solid cellular reception, you might want to consider buying an external antenna. Refer to my post here regarding an antenna that can be purchased from Radio Shack. The antenna is now on clearance for $20 and the pigtail is $10. This may or may not help depending upon your location in relation to the towers, but if you try it out, let me know how it works.
Cheers
Yeah, I'm on an 18 month contract... But I'm about 8 months in now
You might even be able to get bluetooth repeaters once you find your, ahem, sweet spot
danielherrero said:
In both cases (roaming and not) are you registered in same operator?
Click to expand...
Click to collapse
i believe so. the only reason i think it's roaming is because of the Triangle icon. But my SIM is only authorized for one operator, Cingular.
is there a better way to check?
Thank you very much Daniel!
Lancealot said:
If you're having a difficult time maintaining solid cellular reception, you might want to consider buying an external antenna. Refer to my post here regarding an antenna that can be purchased from Radio Shack. The antenna is now on clearance for $20 and the pigtail is $10. This may or may not help depending upon your location in relation to the towers, but if you try it out, let me know how it works.
Cheers
Click to expand...
Click to collapse
i would be willing to try those products but i believe they're now fully discontinued. Either of those item numbers from your post no longer exsist.
No problem
taze said:
i would be willing to try those products but i believe they're now fully discontinued. Either of those item numbers from your post no longer exsist.
Click to expand...
Click to collapse
Call your closest Radio Shack and ask if they have either of those catalog numbers in stock. Worst case scenario is that they won't, however they can check the districts perpetual stock and see how many are available, and if you ask nicely, they can have the antenna and pigtail shipped to their store so you don't have to run all over creation just to get it.
...An even worst case scenario would be if you didn't live in the US or didn't have any Radio Shacks close by.. however I might know of someone who could use their employee discount to cover shipping costs Let me know if you have any questions.
weinson said:
you should re-post over in this thread Daniel's software might be able to solve your problem (or Daniel might have other ideas).
Click to expand...
Click to collapse
Taze,
I would also recommend that you try one of Daniel's applications - he is working on Comm Manager Pro but I think that Bandswitch will probably help you. I find similar problems to those you describe at work here in the UK with T-Mobile and my battery would often run low even during a day at work. The problem appears to have been caused by the Vario II (Hermes) spending all day jumping back and forward between networks whilst hunting for the best signal. Although the Bandswitch application (very small footprint) will not increase the signal you may find that forcing the phone to operate in a particular band helps - this is very easily achieved via the Bandswitch interface rather than going into settings each time. I now regularly switch to GSM each day when I get to work and it has solved my battery run-down issue completely!
Comm Manager Pro does much the same and more. It allows you to define a location (according to Cell ID and LAC Code) from which you can set the CMP application to (amongst other functions) switch to a particular band - or even turn the phone off).
Given what you have said this may not help but I would certainly give it a go. Good luck.
Regards
tony.wheeler said:
Taze,
I would also recommend that you try one of Daniel's applications - he is working on Comm Manager Pro but I think that Bandswitch will probably help you. I find similar problems to those you describe at work here in the UK with T-Mobile and my battery would often run low even during a day at work. The problem appears to have been caused by the Vario II (Hermes) spending all day jumping back and forward between networks whilst hunting for the best signal. Although the Bandswitch application (very small footprint) will not increase the signal you may find that forcing the phone to operate in a particular band helps - this is very easily achieved via the Bandswitch interface rather than going into settings each time. I now regularly switch to GSM each day when I get to work and it has solved my battery run-down issue completely!
Comm Manager Pro does much the same and more. It allows you to define a location (according to Cell ID and LAC Code) from which you can set the CMP application to (amongst other functions) switch to a particular band - or even turn the phone off).
Given what you have said this may not help but I would certainly give it a go. Good luck.
Regards
Click to expand...
Click to collapse
im going to try bandswitch today and see how it works. thank you for the suggestion!
i wish daniel could add the feature of blocked, preferred, of locked Cell ID's. that would be worth a good amount of money to me....
Hi.
I would like to help you.... I can detect cells and lac but I cant force radio hardware to attach on a particular cell. This a task for Radio ROM. The only posibility (maybe) would be if the operator names are diferent. Could you go to settings a search for operators? Maybe your operator has different name in roaming than non roaming. In that case It would be easy to help you....
Oooo if FieldTest were a controllable application....
Ok what I’ve discovered so far after watching FieldTest for about an hour.
The Good Connection -
LAC 0020
MNC/MCC 31017
NCELL INFO1 700-80 dbm <---- (at least four out of six NCELL maintain a steady 700-80dbm, often all six NCELL)
NCELL INFO2 700-80 dbm
NCELL INFO3 700-80 dbm
NCELL INFO4 700-80 dbm
NCELL INFO5 700-80 dbm
NCELL INFO6 700-80 dbm
BAND 2CS
CHANNEL 1:CCCH (stays, doesn’t change)
The Bad Connection
LAC d6ef
MNC/MCC 31380
NCELL INFO1 140-100 dbm
NCELL INFO2 140-100 dbm <---- (i get two NCELL at the most 140 each, rarely four NCELL, never more)
NCELL INFO3 0
NCELL INFO4 0
NCELL INFO5 0
NCELL INFO6 0
BAND 3:850 (once I saw it switch to PCS on this same MNC)
CHANNEL 1:CCCH/0:BCCH/255<UNKNOWN> (switches between these quite frequently)
So what I’ve interpreted from all that is.
Well I’ve confirmed my ****ty connection. Even though the phone often shows two bars, I can’t make or receive calls. Based on the NCELL db numbers and the constant channel changing, that **** just don’t work.
Most importantly, the phone is always trying to switch to the highest possible band. Because PCS is a lower band than GSM 850, my phone won’t stay on the PCS connection.
O yes, another discovery is, in WM6, if you are connected to a PCS band network, it displays the Triangle icon as if you are roaming but in fact it is not roaming.
So Daniel since you seem to be the best chance for a better life [for my Hermes]:
I need a way to force band selection beyond just GSM and UMTS.
I tried BandSwitch and it does not work for me because all my available connections fall under GSM.
And even beyond that I’d like to be able to force MNC’s, as I believe they are the specific network number.
Or can I block a LAC?
In settings, I only have one operator, Cingular, “Home of the most dropped calls.”
Hi.
I undestand perfectly your frustration and I will try to do what I can althought It doesnt seem easy thing because there isnt any(known) api to manage Radio Rom. Fieldtest is OEM dependent and I imagine It only works for only one manufacturer of radio hardware chip.
Ok, first try. If you start radio phone 10 times....
1) how many times your phone register to roaming (and wished) network?
2) If registed to roaming network, how much time (aprox) stays on it before register to bad cells?.
Why? well ,CMP executes actions when you enter on some place (compound by cells and lacs). You could create a place with your hated cells and then associate the action "reset radio" when registed to those cells (or lacs). In this way if your device falls into bad cells it would be resetted (only radio, not phone) until registed to good cells...
Only an idea....
Dani
If you can determine the direction of the "bad" towers, try lining your walls with lead sheets to block their signals and letting you connect to a prefered tower.
There are a few thread's already on the site about signal problems with the X1 however many are quite old and I thought a specific one with a (so far so good) solution would be welcomed.
Many people have had problems with their signal being lost or being poor and there are posts on the Vodafone forums, here, as well as many other sites and many suggest they have contacted SE without much success. Mine got so bad I was ready to give up the phone and go to N97.
I had some advice from someone at a local friendly phone store about what may be the problem and he suggested (to stop me claiming on my insurance I'm sure) changing the connection settings so it only looks at GSM.....
.....I did this three days ago and since I have had no loss of signal and my signal strength has been better than ever.
To do this:
Start > settings > comm manager > settings > phone > band
Select your network type : GSM
Not sure of the significance of this change (from auto) but its worked wonders for me
Phone:
O2 UK, R3A, xperiatweak, mms changes, Dashwire, advanced config, spb galore
Good luck and I hope this works for you (let me know how it goes)
Found the same problem when I first received the phone, I too changed the band to GSM, mainly to save battery usage as 3G wasn't needed and noticed the signal is A LOT stronger...
Not noticed any downsides to disabling 3G either as my internet browsing is still very fast using Opera Mini.
maybe a stupid question: with 3g disabled, can the phone still lock in HSDPA?
i dont think so
in theory when its connected to 3g it should still have a gsm link as backup to switch to if there is a problem
still working
A week in now and the signal is still without problems and I've found the battery life of the phone is at its longest since I got the phone at the end of last year
In answer to other posts - I've remained connected to O2 UK Mobile WEb (GPRS, 3G) despite selecting GSM only
This is useful only if you don't need 3G or 3.5G... If your 3G coverage is ok, there is no trouble either... There is a huge change depending your operator and your location
i did this for a couple days and had to switch back. i've NEVER been able to connect to 3g (i have an X1i in america where the X1a is sold), but upon applying this change of setting i couldn't get HSDPA anymore and all my internet/data activities was like creeping death. i could only connect to Edge, which is practically unusable
asayamalaka said:
maybe a stupid question: with 3g disabled, can the phone still lock in HSDPA?
Click to expand...
Click to collapse
nope! but its going to use EDGE which is also pretty fast.u probably wont notice the difference on a smartphone anyway.
achmed20 said:
nope! but its going to use EDGE which is also pretty fast.u probably wont notice the difference on a smartphone anyway.
Click to expand...
Click to collapse
lol are you kidding? when i'm on edge i might as well be tapping morse code across two cans with a string between them. everytime i pull up google maps on edge i might as well pay a homeless guy to steal me map pages, it would take a lot less time..... HSDPA is the complete opposite for me, everything loads almost instantly
Hi!
I have the handset for few weeks and for couple of days I have a problem at the times to connect to internet. Look like Hero try to send data but there is problem with downlink. Some times when you turn off and on the internet it seemsd to be working at the times ....
I have already updated the software to the newest from T-mobile but still the same problem.
Any ideas ???
Thx
Well i have the same problem with Telus in Canada I thought it was a network problem but now you have me wondering if it is a defect.
same here on T-mobile UK in London... I noticed a reboot solves the problem most of the times... But I am not too sure why it happens in the first place. I noticed it seems to happen in very crowded locations rather than when I am somewhere with not too many people. Every time I install a new radio I hope to see the problem disappear, but it never really does. Quite disappointing... :-( Hope for a fix in the near future though.
I've been getting the same problem.
The HSDPA icon will change to 3G, then the connection will stall completely. I'll have to put the phone into airplane mode and back again to restore it.
T-Mobile tried fobbing me off with my contract didn't allow high speed data, to the next person telling me to just try it in a different post code, they're not aware of any problems, with finally the most recent tech support person telling me T-mobile is aware of a HSDPA and 3G problem that should be fixed in 5 days, please bare with us.
W*nkers.
I definately feel like I've bought a red herring with this phone. Or should have at least got it straight from HTC. I'm reluctant to put a new ROM on there so soon after getting it.
In Canada it seems like it is a network problem. I went out of town about a hour and data worked, came back and it did not work. Phoned and was told it is a network issue and to bear with it they are fixing the problem in a couple days. It seems odd that the same thing is happening in two different across the ocean at the same time though. Who knows if it is the same problem though.
I have the same issue with Orange till this weekend when the phone won't work on 3G at home at all even though it gets a signal. The 3G netwrk is down in my home cell area for a week so I'm stuck on 2G. 2G speeds on some sites are even better than 3G as it doesn't stall on the downlink.
I had this issue but it seems to be OK now. Probably a network issue.
Hi !
It look like the blame is the simcard
Someone suggest something and it give me idea. I have put bit of paper betwen simcard and the thing that hold it and then just a bit on top of it and does seem to have problem. It look like Hero have very sensitive simcard holder
Good luck
All fine here!
I'm in south London, UK and never seem to have a problem with the internet. I'm extremly impressed as on my bus journeys I frequently stream like radio without much problem. I hope things improve.
I'm also in south east london
I get awesome speeds with HSDPA, but not so great with 3G.
I generally stream from last.fm and it pretty much stalls when on 3G. Web-browsing on 3G alone is also not that great for me.
This sounds like it's more a problem with the coverage than the phone though (althoguh it's interesting that a reboot/re-enabling mobile net fixes it).
Couple of things to try:
1 - Download a speed-test and see what speeds you're getting.
2 - Check coverage here: http://www.t-mobile.co.uk/services/coverage/street-check/
im having problems to , i spend half the time on Wifi and only use mobile network if im out and about, but im barely getting 3g and im in heart of england (birmingham)
Hi guys,
I don't know how many of you are living in UK or if you experience this in other parts of the world. Basically there's one thing that really annoys me and I can't figure out WHAT'S causing it!
I am well satisfied with my Leo but as to web services I am not so enthusiastic. Firstly I've given up on "My location & weather" services exactly the same way as I did on Blackstone. I just don't bother setting them up after ROM update, so they don't show up on the homescreen and I turn the weather tab off instantly after flash. Reason being: THEY ONLY UPDATE IN CERTAIN LOCATIONS EVEN THOUGH I'VE GOT FULL HSDPA OR 3G SIGNAL COVERAGE ALMOST EVERYWHERE I GO!!!
No idea why this is happening. At home where I've got full 3G and GPRS signal coverage, it updates quickly and nicely. But when I go to work where there's full HSDPA, 3G and also GPRS it will not update whatever trick I try!!! It just pops out a message about not being able to connect... Same thing in town centre and other locations. It seems totally random to me where it works and where it doesn't. And folks: I just hate having 12 hours old location and weather report on my screeen before coming back home or wherever it decides to work!
Now secondly, similar thing happens with web browsers. Because of unsupported flash in Opera I have started using Skyfire in larger scale and recently also the uZARD, if anyone came across to that. They are both good browsers (in my opinion the uZard is nearing perfection!) but strangely a similar issue to the one above comes with them. Again they only seem to work in certain places and again there is quite a decent data coverage almost everywhere in my area.
So the question is: does it have something to do with data services of my network (UK Orange) or is it something radio related maybe? I have tried 2.06, 2.08 and 2.10 radios and there wasn't any significant difference.
Does it ring a bell? Did anyone experience this?
morningstar.fallen said:
Hi guys,
I don't know how many of you are living in UK or if you experience this in other parts of the world. Basically there's one thing that really annoys me and I can't figure out WHAT'S causing it!
I am well satisfied with my Leo but as to web services I am not so enthusiastic. Firstly I've given up on "My location & weather" services exactly the same way as I did on Blackstone. I just don't bother setting them up after ROM update, so they don't show up on the homescreen and I turn the weather tab off instantly after flash. Reason being: THEY ONLY UPDATE IN CERTAIN LOCATIONS EVEN THOUGH I'VE GOT FULL HSDPA OR 3G SIGNAL COVERAGE ALMOST EVERYWHERE I GO!!!
No idea why this is happening. At home where I've got full 3G and GPRS signal coverage, it updates quickly and nicely. But when I go to work where there's full HSDPA, 3G and also GPRS it will not update whatever trick I try!!! It just pops out a message about not being able to connect... Same thing in town centre and other locations. It seems totally random to me where it works and where it doesn't. And folks: I just hate having 12 hours old location and weather report on my screeen before coming back home or wherever it decides to work!
Now secondly, similar thing happens with web browsers. Because of unsupported flash in Opera I have started using Skyfire in larger scale and recently also the uZARD, if anyone came across to that. They are both good browsers (in my opinion the uZard is nearing perfection!) but strangely a similar issue to the one above comes with them. Again they only seem to work in certain places and again there is quite a decent data coverage almost everywhere in my area.
So the question is: does it have something to do with data services of my network (UK Orange) or is it something radio related maybe? I have tried 2.06, 2.08 and 2.10 radios and there wasn't any significant difference.
Does it ring a bell? Did anyone experience this?
Click to expand...
Click to collapse
I'm on o2 I'm and have found the new 2.10th radios to give an extra bar and speed improvements network wise. the latest is awesome but consumes more battery life for me so i went back to 2.10.50.08.2
hope this helps
Im on Virgin in the UK, where i live i have full signal where ever i i am in my town, my location doesn't work simple, i added my own city, my internet works fine, now i have been house sitting for my dad for 2 weeks in a little village, 2 weeks only just had 1 bar of signal and my location worked now wtf is that all about lol, oh my radio in my sig
Im on tmobile uk and when I'm at home I'm lucky if I get 1 bar of 3g coverage, if I dont I'll only get 2 bars of gprs, then again we are behind a ruddy great hill, most other urban areas give good 3g, however like the OP says sometimes theres an issue with speed and location not updating (or updating to the wrong location) despite full coverage
My gf is on vodafone and at home shes lucky if she gets one bar of gprs
But then thats what she deserves for having a iphone!
I've never tried another radio but I'm considering it
Update
Just to let you guys know, UK Orange was going through some major technical difficulties with their 3G network lately. So that has been the cause for trouble with browsers.
But the first problem I've mentioned is a fact that MY LOCATION and WEATHER still only updates on certain (random) places, regardless the signal coverage or radio version!!!
Works fine for me wherever I go on O2 as long as I have somes signal, just takes longer on GPRS.
In my experience of friends on Orange, they've never been good.
Try SPB weather and see if that works.
Alternatively, try updating in an Orange shop, if it fails, ask if you can use one of their handsets to try, and if that works, you'll know it's a problem with your phone so time to get it replaced, if it doesn't work, you'll know Orange are just poo.
Weather Locations has never worked for me. Just look for the cab named something like Dutty's disable current location and it will remove that my location entry in the weather so it will never bother you. Then just manually add your city and job done!
As for the web browsers not working, i had intermittent drops (its ok now tho). but what i did before, was disable HDSPA. the phone kept switching betweeen 3g and hdspa and cudnt make its mind up, and so it wouldnt connect to the net. But as you said Orange have been messing up so it should work soon.
morningstar.fallen said:
Just to let you guys know, UK Orange was going through some major technical difficulties with their 3G network lately. So that has been the cause for trouble with browsers.
But the first problem I've mentioned is a fact that MY LOCATION and WEATHER still only updates on certain (random) places, regardless the signal coverage or radio version!!!
Click to expand...
Click to collapse
I have to ask how often is it set to update? i have mine set to update every 3 hours and it does. The location accuracy can be a little off at times but i don't really rely on it and if i do notice i'll do a manual update which works first time 99% of the time.
Poor 3G/HSDPA signal (2 bars or less) will cause some crazy packet loss and will cause problems with internet connectivity in general. Most often the phone will fall back to EDGE and then GPRS in order to correct this (but for saking the speed). If the signal is still crap then there is no hope. I'm on O2 and my radio version is in my signature. I was using 2.07 (stock) and that wasn't brilliant and i have heard that the newer radios suck the battery and the wifi isn't so great.
If your signal is pants even with the new radio i would advise you lay your hands on an extended battery and leave the wifi chip turned on. Then if you configure to connect any unsecure networks first as soon as it finds one you'll have net access.
M3PH said:
I have to ask how often is it set to update? i have mine set to update every 3 hours and it does. The location accuracy can be a little off at times but i don't really rely on it and if i do notice i'll do a manual update which works first time 99% of the time.
Poor 3G/HSDPA signal (2 bars or less) will cause some crazy packet loss and will cause problems with internet connectivity in general. Most often the phone will fall back to EDGE and then GPRS in order to correct this (but for saking the speed). If the signal is still crap then there is no hope. I'm on O2 and my radio version is in my signature. I was using 2.07 (stock) and that wasn't brilliant and i have heard that the newer radios suck the battery and the wifi isn't so great.
If your signal is pants even with the new radio i would advise you lay your hands on an extended battery and leave the wifi chip turned on. Then if you configure to connect any unsecure networks first as soon as it finds one you'll have net access.
Click to expand...
Click to collapse
Hi,
It was set to update every 1 hour and as I said before, there's quite decent signal coverage in my area. I usually have full HSDPA and 3G signal at work and about half of 3G and full GPRS at home. The only time I can think of when I have poor or no connection is on the train (when passing through places with funny welsh names like Llanharran or Pontyclun... ). Still MY LOCATION won't update at work, or central train station or city centre. As a paradox, it updates nicely at home...
Anyway, for sake of having the weather animation on and updating, I have used Dutty's "Disable current location" cab mentioned above. Now the weather service updates fine on manually chosen locations. So bye bye MY LOCATION...
I'm on O2 (UK) and have noticed that all but my local transmitter actually allows weather/location updates.
I did a pretty big test - I drove from the south coast to Edinburgh the other week, and had it updating every 15 mins.
It updated every step of the way.
I'm sitting at home, and it doesn't update.
I've already got hold of my local O2 engineer and he is looking into it as he thinks he knows what the problem is.
The Problem is Orange.....
morningstar.fallen said:
Hi guys,
I don't know how many of you are living in UK or if you experience this in other parts of the world. Basically there's one thing that really annoys me and I can't figure out WHAT'S causing it!
I am well satisfied with my Leo but as to web services I am not so enthusiastic. Firstly I've given up on "My location & weather" services exactly the same way as I did on Blackstone. I just don't bother setting them up after ROM update, so they don't show up on the homescreen and I turn the weather tab off instantly after flash. Reason being: THEY ONLY UPDATE IN CERTAIN LOCATIONS EVEN THOUGH I'VE GOT FULL HSDPA OR 3G SIGNAL COVERAGE ALMOST EVERYWHERE I GO!!!
No idea why this is happening. At home where I've got full 3G and GPRS signal coverage, it updates quickly and nicely. But when I go to work where there's full HSDPA, 3G and also GPRS it will not update whatever trick I try!!! It just pops out a message about not being able to connect... Same thing in town centre and other locations. It seems totally random to me where it works and where it doesn't. And folks: I just hate having 12 hours old location and weather report on my screeen before coming back home or wherever it decides to work!
Now secondly, similar thing happens with web browsers. Because of unsupported flash in Opera I have started using Skyfire in larger scale and recently also the uZARD, if anyone came across to that. They are both good browsers (in my opinion the uZard is nearing perfection!) but strangely a similar issue to the one above comes with them. Again they only seem to work in certain places and again there is quite a decent data coverage almost everywhere in my area.
So the question is: does it have something to do with data services of my network (UK Orange) or is it something radio related maybe? I have tried 2.06, 2.08 and 2.10 radios and there wasn't any significant difference.
Does it ring a bell? Did anyone experience this?
Click to expand...
Click to collapse
I had the same problem in East Anglia with Orange
Switch of 3g and the weather will update
GPRS data works fine, but 3g/hsdpa data was not working i complained to orange and looked on the net loads of other people in this area were having the same trouble....(voice was fine though)
About 2 weeks ago it started working fine except when im surfing i get 'orange safeguard' blocking sites ...it even blocks this site!
its not because ive got safeguard enabled. it's because orange cant establish my identity!
I bet if streamed loads of TV they would identify me for sure...
on orange in cardiff aswel, i find that even though i have a strong 3g signal some times the internet just doesn't work,which gets really annoying, as normally have to terminate the 3g connection then restart it to work.
been reading this thread if any intrest
forum.xda-developers.com/showthread.php?t=614119&page=45
it says about people using the chucky tabtastic ROM, and the problem is gone. but I'm happy with the ROM I'm using, so really wish i knew a fix for this!
On O2 in Nottingham and just recently it's been awful.
I've gone through a multitude of radios and none work with data properly. Weather services always show "My Location" or cannot update. Google maps takes about 10mins to load one square of the map (so GPS navigation is out of the question as the marker moves to a region of the map that isn't updated and takes forever to load).
Opera can now take anywhere between 15 seconds and 5 minutes just to load the Google homepage.
Thing is, about 2 months ago it was perfect, speedy as anything, running fine. Like I said i've gone through various radio roms and have settled on 2.10.50.08_2 at the mo as it gives the best battery life for me, but even with full 3g/hsdpa signals i get rubbish data performance.
I know that stopping and starting the data connection sometimes fixes it, but I'm not prepared to continually stop and start connections just to be able to browse the web.
I've tried switching from 3G to 2G mode at work so the device started using GPRS signal instead of HSDPA but there was no joy either. Initially I would incline to idea that this would be a problem of Orange UK only but it seems now that people using other networks are experiencing the same. I wish I could only guess how much of this is caused by the technical breakdown Orange UK (and maybe other networks?) were recently going through. I think the actual efficiency of MY LOCATION service in UK was never great...
I'm on Vodafone, Kingston upon Thames,
Radio: 2.10.50.26 (Leon Rom)
Had the same problems ( almost all stated in here ) with the new radio i have full bars 70% of the time on almost all connections at home, and before, i used to have 1 max 2 (the house is in a "bad"/"blind" vodafone coverage area), so this radio seems to work for me.
Still:
the weather i won't mention that it never worked regardless of signal or not, regardless of the connection or radio... then i found something into the menu under the GPS folder... called Quick GPS . I realized that is not a data download problem (as any manually set out location works), it was just a simple "i will tell you the local weather info as soon as i bloody find out where the heck we are" phone problem.
Well all you have to do, is set up the satellites to download automatically and/or update manually when you travel extreme distances... it will definitely improve location tracking as it sets the "default" satellites settings in your area, and to be honest with you, since i set that up, i NEVER had weather/location problems at home or anywhere else. Is just a small tweak witch you won't realize is linked directly to the location service until you open the Quick GPS thing.
For the radio, at least for vodafone users, i recommend the above one. just give it a try as it has decent battery life and a better connection, also everywhere i go i seem to have a working stable connection for data (at least for me it worked, and i do travel alot, needles to say that my laptop gets it's internet from my phone during travels, so bye bye dongle ).
Give it a try, it may really work out.
Initially I would incline to idea that this would be a problem of Orange UK only but it seems now that people using other networks are experiencing the same.
Click to expand...
Click to collapse
hmm... i think is not related to networks more than it needs the network connection to download data (especially that you said the connections are working fine most of the times), location is definitely related to the GPS receiver and the GPS settings (Global Positioning System remember? witch in my book is Location ...), witch apparently on the Leos around UK are not set properly by default.
This is probably why mine works flawlessly. I set WM to use the inbuilt GPS all the time so i don't have to mess about with turning it on in google maps. I don't use QuickGPS because that is about as accurate as as dropping a brick out of a plane at 35,000ft with your eyes closed. Atleast with proper GPS it's accurate to within 20 metres.
when i had the tmobile g1, weather plugin worked almost flawlessly with only odd times it didnt update correctly. but with the hd2 ive been having the same problem recently on tmobile (was on tmobile wiwith the g1 aswell).
Im using the eu rom that allows 576mb ram .
Ive just flashed a new rom and it seems to have detected my location just fine at home. I will know tomorrow when i go to work if it upodates correctly.
DikoMike said:
I'm on Vodafone, Kingston upon Thames,
Radio: 2.10.50.26 (Leon Rom)
Had the same problems ( almost all stated in here ) with the new radio i have full bars 70% of the time on almost all connections at home, and before, i used to have 1 max 2 (the house is in a "bad"/"blind" vodafone coverage area), so this radio seems to work for me.
Still:
the weather i won't mention that it never worked regardless of signal or not, regardless of the connection or radio... then i found something into the menu under the GPS folder... called Quick GPS . I realized that is not a data download problem (as any manually set out location works), it was just a simple "i will tell you the local weather info as soon as i bloody find out where the heck we are" phone problem.
Well all you have to do, is set up the satellites to download automatically and/or update manually when you travel extreme distances... it will definitely improve location tracking as it sets the "default" satellites settings in your area, and to be honest with you, since i set that up, i NEVER had weather/location problems at home or anywhere else. Is just a small tweak witch you won't realize is linked directly to the location service until you open the Quick GPS thing.
For the radio, at least for vodafone users, i recommend the above one. just give it a try as it has decent battery life and a better connection, also everywhere i go i seem to have a working stable connection for data (at least for me it worked, and i do travel alot, needles to say that my laptop gets it's internet from my phone during travels, so bye bye dongle ).
Give it a try, it may really work out.
Click to expand...
Click to collapse
Thanks for the post man Ive been trying many different Radios to get a stable connection with VF I also live in an iffy area so i'll give this one a try and see if it works for me!
I'm also now using a 2.13 rom so it seems that the radio will match
M3PH said:
This is probably why mine works flawlessly. I set WM to use the inbuilt GPS all the time so i don't have to mess about with turning it on in google maps. I don't use QuickGPS because that is about as accurate as as dropping a brick out of a plane at 35,000ft with your eyes closed. Atleast with proper GPS it's accurate to within 20 metres.
Click to expand...
Click to collapse
So how exactly did you set your GPS to work all the time?
morningstar.fallen said:
So how exactly did you set your GPS to work all the time?
Click to expand...
Click to collapse
easy! go into settings in sense, hit menu, all settings. Then go to the system folder and external GPS and set a com port (mine is set to com4)
Job done. Sense will pick it up automatically and then all you need to do is tell google maps it's configued by windows.
Finally disable quickgps by hitting start, tools quickgps and then menu options and uncheck "download quickgps automatically" and "download quickgps when roaming" this will stop it updating when not connected to the pc and save on your data plan if it's limited but allows for a backup to the true gps if for some reason all the satellites get taken out.
**edit** i picked up this tip from a collegue that had a touch pro (well we all did but i left before they got the n900 upgrades) and a tomtom external bluetooth receiver and it appears to work with the internal reveiver on newer devices
I accidentally posted this in the wrong forum, this one seems more appropriate.
First of all, this forum has been very helpful. I almost find that there is too much information available here, boggles the mind.
In any case I have just upgraded to a Touch HD from a Touch Cruise (the first edition). The Touch Cruise was a Great Phone, still is – I was just looking for an upgrade (upgraditis). The model I supposedly obtained (EBay Auction for $161) is the T8285, which is perfect as I am USA bound on the AT&T Network. For all intensive purposes the Phone is working as expected, looks great too!
My first question (I know asked before) is that the phone says it’s a T8282. I realize that any past ROM updates can do this – I do not have a clear history of the device. Looking at the Phone Network selections I have four choices (see below). It does show the UMTS Bands AT&T Operations on, so can I assume that this is an T8285?
• Auto
• GSM(900+1800)+UMTS(900+2100)
• GSM(1900+850)+UMTS(1900+850)
• UMTS(2100+800)
Next: I do not have the Data Plan, nor do I want it. It’s just too pricey and I really do not need it (I have WiFi available at home and work, which appears to be working great). A lot of Forum advice here goes into available Programs to shut off/block the Data from working. Right now I have only two options selected (Turned On) under Connections, the Phone and WiFi. There is a Tab for Data which I left OFF. This seems like a no brainer but as it hasn’t been discussed as an option to the No-Data desires, am I just simply missing something?
I know this is purely taste, but is there a “widely” preferred Screen Saver out there? I have had my Touch Cruise for three years and the Screen is Immaculate due to persistence/diligence on protecting the Screen, but I have noticed that there is differences in quality – LARGE differences! The one I liked the most was the HTC Branded Screen savers. They resisted scratches while not effecting operability. I am now using “Fellowes” Generic savers, which scratch relatively easy.
Of course I have other questions, but I will continue to work them out searching the forums for answers as needed. I know there are people who hate when questions are asked that have been answered before – I did research the above but either found not enough or too much contradicting information.
If you look under the battery, the model number should say BLAC100 or BLAC120. BLAC100=T8282, BLAC120=T8285.
Even if Data Connection is OFF in comm manager, the phone will still connect to the internet as needed. You'll need an app to prevent the data connection from starting, or put an invalid APN in connection settings.
But a large pack of the cheapest screen protectors off ebay and replace them as they get scratched?
Waaaah: It appears I have a T8282, not a T8285 as described in the Ebay Auction. It clearly has the BLAC100 identifier under the battery. However, this may be OK as I never intended to opt for the Data Plan anyway. Other than not being Data accessible for AT&T is there any other differences between the phones - even ever so slight? Like I said I am surfing the WEB via WiFi, making and recieving calls, and accessing the other programs without issue.
I am finding that obtaining a "non-Data-Plan" GPS program for these phones is difficult (obviously my only option now). I like TomTom (had Navigator 6 on my HTC Cruise) but the Nav 6 is not "fully" compatible. The Nav 7 is compatible but does not have available USA Maps. CoPilot Live V8 is out there, but Web reviews leave less-than-desireable reports for the Maps - but the program itself does gets high marks. If TomTom does not give some indication for getting the Maps I will most likely go with CoPilot.
I like the phone and plan on keeping it (I did reply to the EBay seller to see if he can do anything, but do not expect much if any). I see a french site referenced in these forums with a large list of compatible Software but can not current register to his site for the links (others are apparrently having the same issue right now).
If there is any advice/information out there I might find interesting please feel free to feed it back.
Thanks.....
There's no difference between them apart from the addition of different 3G bands, the T8282 came out first in Europe and has the European 3G bands, the T8285 is the 'rest of the world' version with more frequences available.
The T8282 will still work on GSM in the US, but you won't get any 3G, which will only be a problem for voice if you're in 3G-only area. Seems it's been flashed with a T8285 ROM which shows the US 3G frequences, but they won't work on an T8282 as the hardware isn't there to support it.
There's quite a few sat-nav programs available, off the top of my head, there's TomTom, iGo, Route 66, Destinator...
That's what I fugured. However now that you mention it - is AT&T (or will they) be going toward a 3G Only coverage phylosophy. If that is (or will be) their intention this phone will eventually be useless. I find it hard to believe that a changeover like that could take place overnight, but it does make business sense (kind-of). Why maintain multiple systems (in this case Bands) when just your top-of-the-line one will do. They also in turn force the populace to keep upgrading phones pleasing the manufacturers. Kind of a Software thing - only supporting the latest product, forcing upgrades.