Database Users

G4 or G3

hiya folks,
how do i tell if my xda mini s is a G3 or G4?
best regards,
--me

nitr8 said:
hiya folks,
how do i tell if my xda mini s is a G3 or G4?
best regards,
--me
Click to expand...
Click to collapse
when you boot up it will give you an IPL/SPL... if its a G4 your phone will have .0001 at the end of it, example IPL 2.26.0001 SPL 2.26.0001.. a G3 will not have those, example IPL 2.26

thanks shogunmark,
--me

now a better question, what is the difference between G4 and G3 units?

what's funny is that before i upgraded my ROM to the current 2.26, i could have sworn i would always see a .0001 attached to the first and second line. After the upgrade, it doesn't show like that anymore.

Also, what if my unit says IPL 2.13.0000 instead of 0001? Is this a G4 or G3

laca4025 said:
Also, what if my unit says IPL 2.13.0000 instead of 0001? Is this a G4 or G3
Click to expand...
Click to collapse
i believe that if you have any kind of .0000 or .0001 etc that its a G4, none of the G3's have that..

Excuse me if in wrong section, but I have a QTEK S200 (Prophet) with the following bootsplash data:
IPL 2.09
SPL 2.09.0000
GSM 02.07.20
OS 2.9.7.29
I guess it's a G3 version, as IPL doesn't have any trailing zeroes, but could you please confirm that ?
I have a bootsplash lockup problem with the sonar single pulse noise, and afaik the first thing to know is the "G" level.
Thanks for any further hint, btw

Val3r10 said:
Excuse me if in wrong section, but I have a QTEK S200 (Prophet) with the following bootsplash data:
IPL 2.09
SPL 2.09.0000
GSM 02.07.20
OS 2.9.7.29
I guess it's a G3 version, as IPL doesn't have any trailing zeroes, but could you please confirm that ?
I have a bootsplash lockup problem with the sonar single pulse noise, and afaik the first thing to know is the "G" level.
Thanks for any further hint, btw
Click to expand...
Click to collapse
G3 is x.xx or x.xx.0000
G4 is x.xx.0001
--M

How can i upgrade ipl & slp???

Hi guys... i want to upgrade ipl & spl to IPL: 1.25.0001
SPL: 1.25.0000
how can i do that???
and where i can find this upgrades???
Thanks in advance...

Why do you want to upgrade IPL & SPL? there is almost never a good reason for it and it is the most dangerous part to flash, if you *&#$ up your phone is a brick. I would consider again if you really want it if I were you..

perhaps u r right...
but upgrades come out to make thinks or progs better & not to brick them...
but in this case perhaps is not so safe for this upgrade...
Thanks........

Dont confuse higher numbers with an 'upgrade' this is not always the case.

MIKEMOISI said:
Hi guys... i want to upgrade ipl & spl to IPL: 1.25.0001
SPL: 1.25.0000
how can i do that???
and where i can find this upgrades???
Thanks in advance...
Click to expand...
Click to collapse
I think you still have not realized what you want, and what you are going to do. You even did not mention what your device is and what current IPL/SPL are. Its better to do some researches and read few topics before doing that.

IPL 2.09 SPL 2.20.0000 is G3 or G4? please help!

I'm confused since IPL has no zeros after 2.09 it should be G3?
please advise!

G3 .....

triolight said:
I'm confused since IPL has no zeros after 2.09 it should be G3?
please advise!
Click to expand...
Click to collapse
G3!!!!!!!!!!!

how about mine sir?
IPL 1.00
SPL 1.00.0000
G3 or G4?
cheers!

nelman said:
how about mine sir?
IPL 1.00
SPL 1.00.0000
G3 or G4?
cheers!
Click to expand...
Click to collapse
Looks Like G3.
If IPL X.XX.0001 = G4

Whats my Wizard G3 or G4?

Hey,
I want to flash WM6 on my Wizard, I have read a lot of this now here in the board but I still have the question what my wizard is. (sry for my bad english -> german)
IPL and SPL are 3.08. Is it a G3 or G4?
greetz kM

g3 or g4?
im pretty sure if your ipl / spl is just 3.08 then its a g3 if however it has .0001 and then end of your ipl / spl then its a g4
for example,
3.08 = g3
3.08.0001 =g4

Looks like a G3 to me my friend, but to be sure, go ahead and download the Wizard Service Tool and run it...let it do its thing, and it will tell you if its a G3 or G4.

Hey, i tested Wizard Service Tool and you are right - its a G3.
Now I want to unlock the CID with Lokiwiz0.2. First I had downgraded the IPL an d SPL - ok, I tryed. Now my IPL is 1.5 and my SPL is 3.08. -.-
What happend?
edit:Now I tried the Guide from Dr Puttingham with Buttons 1.05-Rom. The self - IPL: 1.05 and SPL still 3.08.
edit2: OK,NOW I HAVE IPL AND SPL at 1.01!!! Now I can flash. YEAH! ^^

g3 or g4
my ipl 2.26
my spl 2.6
it is g3 or g4
need helpppppp
thanks

use wizard service tool..

Prophet stuck at bootscreen......

Prophet STUCK at BootScreen
--------------------------------------------------------------
My Prophet Stuck at bootscreen , with displayed
IPL 2.20
SPL 2.20.0001
HELP........

I have the same problem need to wait for somebody's helpful reply.

SilverWolf said:
I have the same problem need to wait for somebody's helpful reply.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=353547

tnhrthk said:
Prophet STUCK at BootScreen
--------------------------------------------------------------
My Prophet Stuck at bootscreen , with displayed
IPL 2.20
SPL 2.20.0001
HELP........
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=353547

I fixed mine using the ftp://xda:[email protected]/RUU_Prophet_220734_2207114_024721_NVID.exe

HELP ME please i think Spl G4 on G3