Database Users

Wizard O2 MMS Setting

Hello,
Is there anyone using the corporate mode and not able to send MMS ? I've been trying to change and figure the setting on my device. It seem to be not able to send MMS.
If there is someone using the corporate mode and able to send MMS please send me the configuration.
Many Thanks.

Are you using a contract line? if you are try this file. Hopefully it'll solve your problem.

Hello,
No luck, I still not able to send mms.
Are you in the corporate mode as well?

Hi Waiho,
i had this problem, what i had to do was hard reset and install it with all the O2 rubbish. I then wrote down all the details which were stored. Then hard reset in corporate mode and put the details in. Is bit lengthy but neccessary. Sorry i dont have my phone on me at the mo so can even give the details from mine.

mms disappeared
i had the problem of not seeing mms inbox because of not loading the extended rom from t Mobile.
I found out that with total commander you can go to the files in the extended rom and there i needed to execute a file called shortcut_mms1_java6xx-cv-voice-emailwiz-tmo-03nov05.cab to make it work
only need to enter the provider settings now

Hi Enervate,
Do you mind to send me the config detail ?
Thanks!

Use Basic ?
If you use the Basic setting after a hard reset (or Clear Storage) you get the MMS settings OK. Otherwise contact O2 Care and they will send you the settings.
DBo.

Hi Waiho,
ill try and post the settings tonight sometime, am at work at the mo so dont have my phone on me.

Below are the O2 XDA Mini S MMS Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'
The MMS settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.

if you have hard reset in corporate mode, you will also need to enter your GPRS settings, otherwise the MMS cant dial out, ill have these for you tonight

I had them all e-mailed to me yesterday, so I have them handy. Here you go:
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
The GPRS WAP Pay Monthly settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.

street_hawk said:
I had them all e-mailed to me yesterday, so I have them handy. Here you go:
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
The GPRS WAP Pay Monthly settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
Click to expand...
Click to collapse
Thanks For the Information.
I have the exactly setting like above.
The only different make my device able to send MMS is remove :8002 port at the [MMS configuration] but im not able to receive my MMS without putting the port back.
Is really strange.
Guys really thanks for the help....
Is there any other way?

Can Someone post the O2 MMS CAB files ? My MMS INBOX IS not there after I have upgrade.
Thanks.

Has anyone got the settings for pay as you go i can't connect to the internet with my settings. :?
Thanks.

Switched from T mobile to O2

I've moved provider to O2, though i'm using the T-Mobile Vario II handset, however I can't seem to get all the things working.
I've followed all their instructions for the settings and it doesn't seem to work. I'm also fed up of phoning their foreign call centre where they make me feel like I'm speaking swahili other than english. They don't seem to be able to cope with someone not using one of their own handsets.
These are the instructions I've followed. Can anyone think of other reasons why I can't get things working
Mobile Web Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'.
2. Select 'Settings'.
3. Select 'Connections' tab.
4. Select 'Connections'.
5. Select 'Add a new modem connection'.
6. Enter name for connection of 'o2 mobile web'.
7. Select modem type, choose 'Cellular Line (GPRS , 3G).
8. Select 'Next'.
9. Enter Access Point Name of 'mobile.o2.co.uk'.
10. Select 'Next'.
11. Type username of 'o2web'.
12. Type password of 'password'.
13. Select 'Advanced'.
14. Select 'TCP/IP' tab.
15. Select 'Use server-assigned IP address'
16. Select 'Servers' tab.
17. Tap on 'Use specific server address'.
18. Tap within the 'DNS' field, and enter '193.113.200.200'
19. Tap within the 'Alt DNS' field, and enter '193.113.200.201'
20. Tap 'OK' (Top right hand corner)
21. Tap 'Finish'
22. Tap 'ok' twice
23. Tap the 'x' (top right hand corner) to return to the main menu.
The Mobile Web settings are now complete.
GPRS WAP (Wireless Application Protocol) Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the 'Connections' tab
4. Tap the 'Connections' icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap 'Edit'. If no connections are present tap 'New'
7. In the 'Enter a name for the connection' field enter 'GPRS WAP'
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS, 3G)'
9. Tap 'Next'
10. In the 'Access Point Name' field enter 'wap.o2.co.uk'
11. Tap 'Next'
12. In the 'Username' field enter 'o2wap'
13. In the 'Password' field enter 'password'
14. Leave the Domain field blank
15. Tap 'Advanced'
16. In the 'TCP/IP' tab ensure 'Use server-assigned IP address' is selected
17. Tap the 'Servers' tab
18. Ensure the 'Use server-assigned address is selected
19. Tap 'OK' in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the 'WAP' option
26. In the 'Server' field enter '193.113.200.195'
27. In the 'Port' field enter '9201'
28. Tap 'OK' four times to exit
The GPRS WAP settings are now complete.
MMS Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap 'Start'
2. Tap 'Messaging'
3. Tap 'SMS \ MMS'
4. Tap 'Menu'
5. Tap 'MMS Options'
6. On the 'Preferences' Tab 'Save sent messages' should be ticked, other tick boxes do not need to be ticked.
7. On the 'Retrieval mode' drop down, select 'Auto in Home Network'
8. On the 'Attempts before giving up' drop down, select '3'.
9. On the 'Photo resolution' drop down, select 'Original'
10. Tap on the 'Servers' Tab
11. Select 'New' or Tap ok O2UK to edit.
12. Type in Server name 'O2UK'
13. Select 'Gateway' and type in '193.113.200.195'
14. Select 'Port number' and type in '8080'
15. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
16. Select 'Connect via' and select 'My Work Network'
17. Select 'Send limit' set to 300k
18. Select 'Wap Vesrion' to 'WAP 2.0'
19. Tap 'Done'
20. Highlight 'O2UK' and click on 'Set As Default' then Tap 'OK' twice to return.
The MMS settings are now complete.

I used the following settings when I switched.
http://www.o2.co.uk/assets/O2HybridNav/Static-files/PDFs/Pocket PC manual set up instructions.pdf
The only difference I can see is the username used.
May be worth a shot.

Thanks.
I've managed to get the internet working. However the MMS is still not working.
Any suggestions?

Okay I'm still trying to sort this.
I can use my handset for internet. Though it won't let me send email from either my Yahoo or my O2 email accounts. However it does download the yahoo mail.
I still can't get the mms working.
I read through the instructions linked and they seem to be for a slightly different windows setup.
I get the Start - Settings - Connections - connections tab then when adding new it doesn't give you the option of Generic IR Modem. you have the option of Generic IrDA but then it prompts you "Enter the number exactly as it should be dialed. Include any extra numbers such as an outside line or credit card"
I have previously chosen "Cellular Line (GPRS, 3G)" Then filled in the service settings as close as possible.
The APN, - Next
username, password,- Advanced - TCP/IP -Use server-assigned IP address
servers - use specific server address
DNS, Alt DNS - OK
Finish.
There appears to be an awful lot of other things I should be able to fill in, but can't find.
It is windows mobile 5 I'm using.
Anyone got any suggestions. I know there was a weird quirk with some setups so that you had to mms yourself a pic before you could send to anyone else, but this doesn't seem to be the case here as I've tried that too.

Virgin 3G Settings

Virgin 3G settings
1. On the handset, tap on Start.
2. Tap on Settings.
3. Tap on Connections tab.
4. Tap on the Connections icon.
5. Tap on Add a new modem connection under My Work Network.
6. Enter Virgin 3G in the Enter a name for the connection field.
7. Select Cellular Line (GPRS) in the drop down list of Select a modem.
8. Tap on Next.
9. Enter goto.virginmobile.uk in the Access point name field. Tap on Next.
10. Enter user in the User name field.
11. Enter in the Password field.
12. Tap Advanced...
13. Select Use server-assigned IP address. Tap on ok.
14. Tap on Finish.
15. Tap on Set up my proxy server or Edit my proxy server if one exists, under My Work Network.
16. Ensure that checkboxes of This network connects to the Internet and This network uses a proxy server to connect to the Internet are checked.
17. Tap on Advanced...
18. Tap on HTTP.
19. Enter 193.030.166.004 in the Server field.
20. Enter 8080 in the Port field.
21. Tap on ok 4 times and close the window to return to the main screen

Help setting up data account and MMS?

I know this has been talked about before but I am unable to find a thread where the user has gotten it to work.
Following this from tmo:
This part I think it got down but have a few questions:
Setting up the data account
1. On the PDA, tap on Start and then Settings.
2. Tap on the Connections tab.
3. Tap on the Connections icon.
4. Tap on the Advanced tab.
5. Tap on Select Networks.
6. Under the first drop down box, tap on New…
7. In the Enter a name for these settings: field, enter T-Mo MMS
8. Tap on the Modem tab.
9. Tap on New.
10. In the Enter a name for the connection: field, enter T-Mo MMS<<-----Keeps telling me there is already a connection with this name although I dont see it?
11. Tap on the Select a modem: drop down list and select Cellular Line (GPRS).
12. Tap on Next.
13. In the Access point name: field, enter wap.voicestream.com
14. Tap on Next.
15. In the Username: field, enter<<-----Do I enter anything here or leave blank?
16. In the Password field, enter<<-----Do I enter anything here or leave blank?
17. Tap on Finish.
18. Tap on ok three times.
19. Tap on x to close the Settings screen.
Now this is where im really getting confused:
Setting up the MMS profile
1. Tap on Start and then Messages.
2. Tap on Messaging.
3. Tap on Menu and select MMS Configuration...<<-----I dont see anything that says MMS Config?
4. Tap on the Servers tab.
5. Tap on New.
6. In the Server name: field, enter T-Mo MMS
7. In the Gateway: field, enter 216.155.165.50
8. In the Port number: field, enter 8080
9. In the Server address: field, enter http://216.155.174.84/servlets/mms
10. Tap on the Connect via: drop down list and select T-Mo MMS
11. Tap on the WAP Version: drop down list and select WAP 2.0.
12. Tap on Ok.
13. With T-Mo MMS highlighted, tap on Set As Default.
14. Tap on ok.
Thank you and I hope someone can help.
-Jay

n/m, hard reset did the trick

Glad you got it happening, is it now working?
I will hav my new Wizard on Monday, so will be needing to do this.
cheers

2Degrees Settings - NZ

Any Kiwis having trouble with 2Degrees windows mobile settings see below:
INTERNET
Setting up the Internet data account
1. On the handset, tap Start and select Settings.
2. Tap the Connections tab.
3. Tap the Connections icon.
4. Tap the Advanced tab.
5. Tap Select Networks.
6. Under the first drop down box, tap New…
7. In the Enter a name for these settings: field, enter 2D WEB
8. Tap the Modem tab.
9. Tap New…
10. In the Enter a name for the connection: field, enter 2D WEB
11. Tap the Select a modem drop-down list and select Cellular Line (GPRS, 3G).
12. Tap Next.
13. In the Access point name: field, enter internet
14. Tap Next.
15. In the User name: field enter (this field may intentionally be left blank)
16. In the Password: field enter (this field may intentionally be left blank)
17. Tap Finish.
18. Tap the Proxy Settings tab.
19. Select the This network connects to the Internet option.
20. Tap ok three times.
21. Tap x to close the Settings screen.
22. Tap Start, then launch Internet Explorer.
23. Tap Menu.
24. Tap Favorites
25. Tap the Add / Delete tab OR tap Menu
26. Tap Add...OR tap Add Favorite
27. In the Name field, enter D2 Internet
28. In the Address field, enter http://m.2degreesmobile.co.nz/
29. Tap Add.
30. Tap ok.
31. Tap x.
MMS
Setting up the MMS data account
1. On the device, tap on Start and then Settings.
2. Tap on the Connections tab.
3. Tap on the Connections icon.
4. Tap on the Advanced tab.
5. Tap on Select Networks.
6. Tap on New…
7. In the Enter a name for these settings: field, enter 2D MMS
8. Tap on the Modem tab.
9. Tap on New.
10. In the Enter a name for the connection: field, enter 2D MMS
11. Tap on the Select a modem: drop down list and select Cellular Line (GPRS).
12. Tap on Next.
13. Scroll to Access point and enter mms
14. Tap on Next.
15. If required, scroll to User name and enter
16. If required, scroll to Password and enter
17. Tap on Finish.
18. Tap on ok three times.
19. Tap on x to close the settings screen.
Setting up the MMS account
1. Tap Start, then Messaging.
2. Tap on SMS \ MMS.
3. Tap Menu, then New followed by MMS.
4. Tap Select.
5. Tap Menu, then Options followed by MMS Options.
6. Tap Servers, then New.
7. Enter 2D MMS
8. Scroll to Gateway and enter 118.148.1.118
9. Scroll to Port number and enter 8080
10. Scroll to Server Address and enter http://mms.2degreesmobile.net.nz:48090
11. Select 2D MMS from the Connect via drop-down list.
12. From WAP Version select WAP 2.0
13. Tap Done.
14. Highlight 2D MMS and tap Set As Default.
15. Tap ok.

Thank you!!!
waterworth, you're a lifesaver!!! The information on the 2degrees website wasn't particularly helpful, but with your instructions I've now got MMS and mobile Internet working on my brand new HTC HD2! I don't think I could've figured it out otherwise.
Now we just need 2degrees to roll out that 3G network...
Thanks so much,
Kate.

Yep, thanx, but don't forget to set HSDPA to off !

legendary!
I've finally been able to configure my old i-mate JasJar to send mms and connect to the internet - after trying to use the 2degrees configurator and manual config numerous times without success.
Cheers!

Thanks, will post this info on proper thread GPRS/Internet Connection Settings for the whole world

Thanks for posting this! I don't have much use for them - I can remember the APN's from all the times i've put them in - but its good its here!