Related
apologies if this has already been answered somewhere.. if so could you please direct me to the answer.
i recently upgraded and got wm 2005. i'm running pocketbreeze on the today screen and i'm having a problem with appointments being one hour out. if i go to the calendar and make the appointment 8-9, it comes up as 9-10 in pocketbreeze.
however its not quite as simple as that.. there are SOME appointments (i *think* they're the ones i've made in outlook) that appear at the CORRECT time. although, they happen to have moved back one hour. IE, one appointment i had went from 7-8.30, it moved back to 6-7.30, but said 6-7.30 in BOTH pocketbreeze AND the calendar.
to confuse matters more, i *think* (i'm at work right now so i'm not 100% sure) that the times that are showing in pocketbreeze are the same times that are showing in outlook.
SO - this is basically it: any appointments i make in the calendar on the phone appear in pocketbreeze and outlook one hour early. appointments i make in outlook appear correct in all 3.
i've double checked the regional settings and both my phone and computer are set to the same place. can anyone shed any light on this odd issue?
You are certainly not alone. I've seen this reported on this board a few times. I do not recall the solution but perhaps you can try a few searches perhaps using advanced options on things like synchronisation time etc.
I do remember various theories about this but not one that came to a definitive conclusion. One for example was that the phone company was sending auto sync info of the wrong time zone for the area (ie not wrong time just zone). This seemed to be most reported in parts of Australia it might help to search on some of the time zone abbreviations.
Mike
hi mike - thanks for your help. i ended up finding something on whirlpool.net.au
for anyone else with this problem (i think its specific to my phone, jasjam, and my carrier, telstra) the solution was:
Go to Start, Settings, Phone.
Scroll right until you get to the time zone tab on the bottom.
Uncheck the “Automatic change time zone and clock.” Option
Then go to the today screen and select the time.
Change the time up a couple of hours and press ok and Yes to save the time.
Go back and fix the Time and Time Zone to correct setting,
Again press ok and yes to save the time, this will commit this to the ROM and fix the time settings.
post is here:
http://forums.whirlpool.net.au/forum-replies-archive.cfm/619962.html
Thank you benzothegreat for providing this feedback and summarising the conclusion, cheers.
Mike
This works!!!
I have a T-Wing, WM6 and I was having the same problem, the reminders for bdays showing up one day earlier..and noticed that the issue was only for dates were the DST applied . I'm not that concerned about outlook showing duplicate bday reminders , but I do care about showing them on the wrong date..... long story short.. here is the fix:
1. Goto http://www.microsoft.com/downloads/details.aspx?familyid=E343A233-B9C8-4652-9DD8-AE0F1AF62568&displaylang=en and download the Microsoft Office Outlook Tool: Time Zone Data Update Tool for Microsoft Office Outlook
2. Follow instructions and install.
3. After instalation completed, goto start -> all programs -> Microsoft office outlook tools -> Time Zone Data Update Tool -> Time Zone Daylight Savings Update Mode
4. It will update your appointments/ reminders (including bday reminders) and show them on the right date!
I have a an intermittent problem on my Tytn. Every so often I put a Monday calendar entry in, then when I look later at the Today screen I find that although the appointment time is correct the day is showing as Tuesday. When I look in the calendar it is entered correctly as Monday.
Anyone any idea why this happens?
Thanks,
Al
Alabama978 said:
I have a an intermittent problem on my Tytn. Every so often I put a Monday calendar entry in, then when I look later at the Today screen I find that although the appointment time is correct the day is showing as Tuesday. When I look in the calendar it is entered correctly as Monday.
Anyone any idea why this happens?
Thanks,
Al
Click to expand...
Click to collapse
This is a well reported problem and may have something to do with time zones. You will need to search here and on google. Possible searches to include 1 day and 1 hour outllook wm5 calendar etc.
Mike
If the meeting is after 3 or 4 days (for example) my tytn will always show MEETING TOMORROW. why is it so?
Try the google search on sticky above. When I just tried there were a few. For example:
http://forum.xda-developers.com/showthread.php?t=271325
Oh, and this is a general WM5 issue so don't limit search to Hermes or even just this forum.
Oh and!!, also check the "1 hour" out error because one hour out takes an all day appt into the next day - so the two things can be related.
Mike
Hello @ all,
this is my first post and that is why I would like to say "hello" to everybody first
My touch HD arrived last week and I am very happy with it, but I do have a big problem that goes on my nerves!
When I add new appointments, TouchFlo3D shows the appointments just one day before, saying: Tomorrow:...
Ok, let's say, I have an appointment today at 7 pm and I had one this morning from 9 to 10 am. Now, it is quarter past three (where I live) and the Touch HD still shows me the morning appointment instead of not displaying it as it is already over.
When I now start the calendar and edit an appointment, as for example the evening appointment from today and save all changes, then TF3D updates and only shows the appointment at 7 pm.
Why doesn't it update the appointments by itself? It cannot be the intention to either restart the device or to edit something in the calender, can it?
yes, have the same probs.
Appointment from 9-10 o´clock and at 10:30 o´clock the appointment still at the home tab. The bigger problem is, when you are have the sound-option "vibrate on appiontments" active, the vibration is at 10:30 still activated without an appointment around 10:30
same problem here......
Damn...well, I do not have remind functions activated...but nonetheless, it is not acceptable the way it is.
But according to http://www.ppc-welt.info/community/forumdisplay.php?f=211 many german user do not have this problem. I'm suprised that it works in many cases correctly. So what could it be? I hard resetted the device three times already but no change.
same problem here. I checked the date settings (didn't change anything) and went back to the home tab though, everything was ok....!!!
It is annoying, but is corrected when I update and save another meeting, then the old meeting disappears finally from TF3D. Seems to be a problem updating between the Winmobile calendar app and TF3D. So either MS or HTC have to come up with a fix.
I've the same problem and i am a german user
Switching trough the tabs or reactivate Tf3D will fix it here.sometimes a restart from the device also works.difficulty to say
Appointments do not update
I have the same problem. I had an all-day event marked in my calendar for yesterday. This morning it was still showing on the TFL3D today screen.
I went into the calendar and came back out to see if the appointments would update, but they didn't.
Had to soft-reset for the appointments to update. Surely HTC don't expect people to soft-reset every morning so that the appointments update? Has anyone worked out a fix for this? Mr HTC, please can you fix this!
Qas
Same problem here.
If I close TF3D and load it again, the calendar is ok.
lamajstro said:
Hello @ all,
this is my first post and that is why I would like to say "hello" to everybody first
My touch HD arrived last week and I am very happy with it, but I do have a big problem that goes on my nerves!
When I add new appointments, TouchFlo3D shows the appointments just one day before, saying: Tomorrow:...
Ok, let's say, I have an appointment today at 7 pm and I had one this morning from 9 to 10 am. Now, it is quarter past three (where I live) and the Touch HD still shows me the morning appointment instead of not displaying it as it is already over.
When I now start the calendar and edit an appointment, as for example the evening appointment from today and save all changes, then TF3D updates and only shows the appointment at 7 pm.
Why doesn't it update the appointments by itself? It cannot be the intention to either restart the device or to edit something in the calender, can it?
Click to expand...
Click to collapse
My HD with DUTCH language has the same problems After a few calls to HTC Europe in UK its now finally registered as a known issue and I'm assured that they work on a hotfix to solve this worldwide problem.
A temporary work-around is to programm a daily 'empty' appointment from 0.00 till 0.00 without any alarms or whatever. It will show up on your hometab like all the other appointments, but it will trigger it to refresh the data each morning the 0.00 passes.
michedenhaag said:
A temporary work-around is to programm a daily 'empty' appointment from 0.00 till 0.00 without any alarms or whatever. It will show up on your hometab like all the other appointments, but it will trigger it to refresh the data each morning the 0.00 passes.
Click to expand...
Click to collapse
same problem here, i just added a 0.00 to 0.00 apportionment, will let everyone know if it work by tomorrow. Thx michedenhaag for the fix
One week visibility
Do you know if it is possible two have one week visibility for the upcoming events on the home of the TF3D instead of one day ?
I've the same problem and also with my mail. I let my device retreive mail every 10 min from an Imap account. But when I turn on the device then it sounds and vibrates that there is new mail. But with TF3d off it will ring as soon as my mail enters the box. So I think that TF3D has a bug with updating from the registry.
Another user with the same issue. And just like sstolk, I also noticed that emails and sms messages only update after I unlock (as in resume from standby) the device.
Another one and the same problem....
i have the same problem, i hope for a fix.
A possible (temporary I hope) solution is to rely on ActiveSync.
Create a fake exchange profile in ActiveSync and set it to update every 5 minutes (might create a connection, unsure). From what I saw so far, every "sync" forces TF3D to update. Might not be foolproof, but for now it has worked for me.
Ok, the last suggestion turned out to be false hope.
But I have a new theory. My TF3D calendar worked just fine for 3 days now (without any resets). What changed? I have not connected the phone to my PC during these three days. So the new theory is that when syncing stuff over activesync TF3D somehow fails to reconnect to the database - turning it off and on after a sync might perhaps solve the issue.
Still haven't found a permanent fix for this...
Anyone else experiencing it? Any idea how to fix it?
Let's hope they post a fix soon! If anyone finds a solution, please post it in this thread.
Hi everyone...
Has anyone had the problem where when there is an event scheduled for today, on the homescreen it is shown as for Tomorrow. I have noticed this to be the case when I have nothing in the calendar the next day the events for today will be listed under tomorrow.
Any thoughts as to how to get rid of this bug?
I noticed this happening a few times as well.
I never found the cause, and I haven't changed anything to my knowledge, but it isn't doing it now!
Would be interested to see what the problem was?
I also had this problem. But noticed that it got corrected automatically when I active-sync with the computer, then everything corrects itself.
Not sur what causes the problem,but I once got it when I used google map and then got a call. After the call and I closed google map. I saw the same problem as you mentioned. I got it fixed when I used activesync.
I am also having the same problem, i have to do a soft reset to fix it. Is there a fix for this problem or?
Ok - I was keeping an eye on the calendar whole day yesterday and today...
1. The items for today afternoon which are listed as tomorrow changes to the correct way after 1pm
2. After an event in the calendar is over, it doesnt remove it from the screen for a few hours!! Yesterday I had an even that ended at 3 PM and even at 5PM it was still in my screen. It was only after I opened the calendar that it disappeared.
Could it be a bug with outlook calendar or would it be the Touchflo 3D??
Tomorow appointments
Hello, I have the same issue, and I noticed that the TF3D doesn't modify the appointments when the day changes at midnight. So things for tomorrow stand for tomorrow when tomorrow becomes today. It is fixed if you soft reset, or open the event and save it with no change, or if you sync with the PC.
My best way to fix it it to do a soft reset when I wake up... Maybe i will install an app doing an automatic scheduled soft reset in the night. But if I do so, I have to disable the PIN code althought I can not get a call until I enter the PIN number.
Audette said:
Hi everyone...
Has anyone had the problem where when there is an event scheduled for today, on the homescreen it is shown as for Tomorrow.
Click to expand...
Click to collapse
Yes, lot's of people had this problem and it has been discussed here already, so use search option for possible solutions.
There are ROMs with latest versions of TF3D - installing them will solve this issue for sure. If you don't want to do it, you'll have to wait for official fix from HTC (if it ever happens).
Hi, I've had my HD2 for just over a week and really pleased with it
What I cannot seem to find is a way of adding a note to a day in the calendar so that when I go back to that day i can read that entry.
Therefore, could I do this with some other software?
Some sort of diary perhaps?
TIA
Bixx
you can add a new note to a day by hitting menu new appointment and put the time as all day if u dont want a specific time hope that helps