After finding a thread on this forum about using an FM transmitter with my wizard to get phone calls via the car stereo which works great I now need a new profile.
Is it possible to set the phone that when it is connected via the headphone jack it will automatically answer calls AND turn on the speakerphone.
Related
I would want/need an application w/c has a profile capability that will allow audios(call, microphone, mp3) to be redirected to both the wired earphone and at the same time spearphone or the phone itself, while the wired earphone is still plugged in. The audio needs to come out or the sound should come out on both the wired earphone and phone or speakerphone. I need this while driving and my wife needs to hear the message from the party being called or called upon. Or if I'm listening to a good music on my wired headset only, but later on would like to share it to everybody while driving again. I need to be able to toggle it easily. I've seen phoneweaver and phonealarm but these two does not fit the need describe above. If there is none existing, can somebody create this very simple app for my need? I'm willing to donate if ever. Btw, my unit is an O2 Xda Atom and I got this idea from the build in FM radio build in application that has this button w/c allows audio on both wired headset and phone. It does not work on calls and turning the radio always on drains the battery. And the wired headset acts as the antenna. Thanks in advance.
I have a Sprint 6900 Touch running the stock version of WM6.1. If I enable the Bluetooth audio gateway using acbToggleBT, to listen to music, the volume is low. Its also low when I enable Voice Command through the Bluetooth headset. If my wired stereo headset is plugged into the bottom of the phone and I enable the Bluetooth audio gateway using acbToggleBT then it sounds great. I have tried several things to figure out what is going on and have come to one possible solution.
I need an application that would force my phone into the headset profile. If I enable the Bluetooth gateway without a headset plugged in I believe the phone is in the hands-free profile and not the headset profile. I know I can do this manually by plug-in in the headset connector but can this be done via a program? I would like to have a program launch the headset profile then launch the Bluetooth audio gateway.
I also posted more information here:
http://forum.xda-developers.com/showthread.php?t=431244
Thanks!
Not sure if this is the correct place to post this
I have just upgraded from a kaiser to the HD2. I have a Bury take and talk car kit installed so have replace the Kaiser cradle with the Universal Bluetooth cradle. The phone pairs ok, the volume is low over the car speakers but this was the same for the kaiser and I have found that bury sell an amplifier to boost the volume. So far so good.
My question now is is there any way for routing music and gps instructions over the bluetooth connection. Registry hack, app or whatever. I cant see that it cant be done. I have read bits on other threads / forums about routing to Bluetooth headsets, and im thinking this is similar.
Anyone got any good ideas? I havent installed or messed with much yet so am willing to try stuff and hard reset if required
If the carkit doubles as a bluetooth headset and no more, it will only support the protocol which enables you to place calls with the carkit, and route the audio and mic for the call over bluetooth. If you want an audio connection, be sure your carkit allows for an A2DP connection - then you will get music and possibly also voice streams via bluetooth out of your car speakers.
Sorry if this has been asked before, but i had a look and couldn't find what i'm after.
Basically, my HD2 connects automatically to my car's bluetooth handsfree kit. My handsfree kit doesn't support A2DP so I still need to use the headphone socket to listen to music from the phone through the stereo. However, if the phone has paired with the car, the headphone socket doesn't work and the stereo thinks I'm getting a call when i try and play music.
Is there any way I can enable music through the headphone socket while the phone is paired to the handsfree kit?
Thanks!
anyone? it's really annoying!
This may not be the answer your looking for but have you tried cutting out the middle man i.e. the BT handsfree kit. Just use your phone and it'll patch a call thru the headphones and cancel the music.
Saves removing the headphones each time you get a call.
In BT manager, when you select your car device, what services do you have? If there's a stereo one, untick it.
Nope, just the headset profile. I've also tried turning on/off the option to send system sounds over bluetooth, but no joy. It just seems that as soon as it connects to the car, the headphone socket is disabled.....
OK, so I think the problem was either the tape adapter I was trying to use was playing up or during my messing about with settings I changed something.... either way it appears to be ok with headphones so should be fine with a line in
Hi guys!
So, the Xperia support A2DP just fine, also in combination with my car stereo (a Pioneer Avic D3BT set). However, I find that when I start playing audio (doesn't matter if this is music or satnav guidance) before I start the car (and hence the stereo set), not only will the audio not be re-routed to the stereo, but the phone also fails to connect with the A2DP part. Phone audio (headset profile) is connected OK, though.
Is this normal behaviour/has anyone seen the same behaviour?
Oh, and if anyone has a way of transferring contact to the phonebook of the car, I'd be delighted to hear about it. For me, it will immediately disconnect if I even attempt to transfer a phonebook item.
Hey Stampot. I have a Pioneer BROWSE system(BTB200) and I have the same problem. I find if I activate the phone bt after the car is on, A2DP connects fine. But if I do it the other way around,I only get phone audio. To fix I either have to disable/enable the phone bt or (the faster way) toggle the a2dp option. I'm hoping a de/firmware upgrades fixes the prob.
-------------------------------------
Sent via the XDA Tapatalk App
Its works better when u start the car first and that should not be a problem, shouldn't????
Its the same with every Bluetooth Headset. U can do it with the other way, but u must choose the Audioconnection in the Bluetoothsettings manually.