Got a problem I'm hoping someone can help me with it .
i have a xda neo and its somehow got lock n now and i cant used my phone nor its get Synchronized its say "device is lock " and it say i need password 2 Synchronized ......can any 1 tell how2 remove password ?????
You forgot the password? I think the solution is to Hard Reset..
Press both the Camera and Comm Manager button on both sides and HOLD then Soft Reset..do not release yet the 2 buttons until you see the black screen with a dialogue that says the key to press to reset it.
Related
Hi, a helpfull friend has set the WM5 password to strong alphanumeric and has forgotten it,or just wont tell me what it is. Can anyone tell me, how can I get around this to get MDA Vario working again?
Many thanks
I think a hard reset may fix.
But I am not to sure.
I have tried that, device is still coming up with password request.
All I can think of is flashing it with a new ROM but if it goes bad it could kill the device and I am not sure it would remove it but in theory it should. Other members may have some hacks to fix it.
A hard reset will definitely remove the password, maybe you are just soft resetting the device.
I have tried as says in manual many times, it comes back up with the password screen every time.
I can only try it with MDA:
Turned off
Turned on with password screen illuminated
Manual says:
88 Managing Your MDA Vario
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command button on
the device.
2. Keep the two buttons pressed, and at the same time, use the stylus to lightly
press and hold the RESET button.
RESET button
Voice Command button
Comm Manager button
I have tried it with MDA:
turned off
turned on showing password screen
Sounds like you are doing the reset wrong....
Hard resets are awkward - hold in the two top side buttons, press the reset and keep holding the top two buttons after you have removed the stylus from the reset hole. About four seconds should do it.
Hope that helps.
you'll know if you got it because you'll get a black screen with white lettering that says "press send to format" or the like
otherwise its just a soft reset. On an older ipaq I had, if I had a password it would ask on teh PC everytime I synched. This was with PPC 2003. I'm not sure if you'll still have a problem when you try to sync your data though.
Good luck.
Bilbo_28 & others - You were right, I was not doing a hard reset properly and getting only the soft reset.
It seems after doing it a few times, that the hard reset instructions in the manual should read something like:
hold in the two top side buttons, both the send and receive buttons leds should come on and stay lit.
Insert the stylus in the reset hole and observe both send and receive buttons extinguish
remove the stylus from the reset hole and keep holding the two top side buttons until:
The screen goes black and the following message appears:
Press send to restore
factory default,
Other keys to quit
Release the top two side buttons
Then press SEND to restore factory default
or press any other key to abort hard reset
I think an e-mail to T-Mobile telling them to update the manual would not go amiss !!
Many thanks for your assistance.
Thankz man
hey thankz man really got a great relief
Wow. I was doing the hard reset wrong. I had the same password problem. But now its stuck on the "align screen" menu wth? It moves the cursor around the screen and yet it comes back to the menu. I've run through it at least 10 times now
Hi, my friend, I have a PDA Qtek brand, when I turn on it ask the password, but if I write my password don't appear the OK to confirm.. I hope in a HARD RESET or in upgrade firmware but the PC sync no connect if I don't make the password.. and I know it but if the OK is disappear.. i can't do it !! HELP ME
you can hard reset without the password if you hold comm manager, voice com and camera buttons while putting the stylus in the soft reset hole and removing it. hold all of the other buttons until the screen asks for you to confirm format by hitting the call button.
Someone pls help me. I had my BA password protected. The problem is i've resetted it but i didn't change anything and now i cannot access my BA coz it dont accept my password :-(. Pls help me
ah.... i think many people here knows this bugs has happened from WM6.0 soft reset may help you..
if the problem persist
go to boot loader mode to clean only the registry hive (it may resulting your installed programs to stop working....)
to clarify on the above post, press both left hand side buttons in and then press the reset button. then you should get 3 options. you press the top left button to scroll through the options and the bottom left hand side button to enable or disable the option. after the options are set, press the reset button. if this doesnt work, press the power button, the top left button and the reset button and flash your device
HR is ok! Happy lucky!
hello all ,
i need your help with this problem , my HTC touch cruise touch screen stopped working and i have the Mobile sync with exchange and i'm unable to do anything before i put the password , even HARD reset is not working
even whn i try to connet to PC by USB cable it ask to unlock by enteriing password
r 1.58.21.23
G: 25.65.30.04w
d 1.28.00.00
with windows mobile
can you please help me ?
While gps button pressed (under green button), press center D-pad button this will bring you to alignment screen it saved me from HR many times.
if this will not work try HR - while gps & explorer buttons pressed, press the reset button.
if this won't help try another rom using SDcard method.
if all will not help its probably hardware.....
I've just got my HTC HD2 and after playing with it for while i set 4 digit password for the device as it turns on so it should ask for password.
After reseting and turning the fone on i couldn't manage to enter the password as i enter password it says WRong password or it doesn't even accept the password and remains on the password entering screen.
Any help to remove this password or deal with this issue plz.
Its just brand new fone.
plz help i am really stuck with this thing if u have post or anything regarding this just give me link i'll follow it please...
thanks in advance
HELP!!!
please help me out i am really in trouble ...
sorry for being noob but i really do need to unlock the screen.
thanks
dont delete ... plz
did you just install swype 3.9 ? it has an issue with screen passwords. look through the forum, first few pages there are a few current threads. I think its bad news though, hard reset time....
Code:
No i didn't install any software i just used the software that comes with the HTC HD2 it self and all i did is set put password wenever u turn off screen and turn back on.
and its annoying is there any way to remove this? plz help!
Performing a factory reset via settings
The most convenient way to do a factory reset is via the phone settings.
On the Home screen's Settings tab, tap Menu > All Settings > System > Clear Storage.
Enter 1234.
Tap YES to perform the reset, or tap NO to cancel the reset.
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
Well that did the job for me..... i suggest use it if u need it only!
it happened to me too
hd2 password lock is not reliable at all, it happened to me twice so far. very annoying. hard reset is the only solution.