Related
Got some files in a CAB I want to install on a number of units. I would "like" to create an installer that I just double-click on desktop & it installs via ActiveSync - simple. But I'm not a programmer - what would be the best way to do this? Prefer not to copy via explorer & click the CAB on the XDA unit & others may be doing this, so trying to keep it simple. Ideas/recommendations?
I brought Natural Installer a few years back and it has been the business. It is very simple to use, all with a windows interface and creates a single exe as you say that you just double click on to install.
Have a look here :-
http://naturalinstaller.com/
The site does not mention 2003, have you had any problems with that?
Can you define install location? SD Card
How does it deal with chaty cabs (those that want input).
I've had no problems with PPC2003, why don't you download the trial version and give it a go. Post a reply on this thread as to how it works.
As for chaty cabs I think you can make your own setup.dll but I don't know how to and have never done that.
All I wanted was a basic setup that could make directorys, copy files and set some default registry keys as needed, I found that Natural Installer did that very well. As for more advanced stuff I don't know - but as written trial it.
Well I downloaded it and played with it.
For me it seems to be a WinCabManager type appliction.
Yes you can copy files, set reg entries, make dirs, add icons.
All of this seems doable.
What I was hoping for was a selfextracting file that installs a few cabs and not the content of them.
With the BlueAngel you can set up a autorun that runs a list of cabs in the config.txt file. However for this you need to hack the reg to set the pointer for the autorun and config.txt.
I was hoping that this would be more down the lines of cabinstaller that allows you to define which cab you want were but alas does not allow you to define a list of what cabs you want in what location.
So problem for me not solved but thanks for the tip.
Hi Dave
Personally I use NSIS (Nullsoft Installer) - it is basically a very customisable installer which can be scripted to look like any other installer in existance, or you can make it look totally unique to you!
Another great thing about it is that you can make it install multiple cab files at the same time (it's just a case of calling ActiveSync with the cab file you want to install).
Best of all... it's free
Pope <><
Hi All,
Wouldn't it be great to be able to control which applications ran on your PDA...Ensuring that your users could not run certain apps would be a real bonus.
So I came across a URL that explained just how to do this...
http://www.satter.org/2007/03/lets_shell_some.html#comment-74156022
Sadly, for me I am on WM6 but only have access to the WM5 SDK and when I tried to carry out the suggestions I failed with the SMS text error:
Change of Device Settings Unsuccessful
Your device settings cannot be changed by Test.cpf
So I am at a dead end. Can anyone else who has interest step in and assist this beginner to get this function working?
I ran the SDKCerts.Cab on my device and the SecurityOff.CPF file. They were successful and I got the SMS message telling me that the changes in SecurityOff.cpf were successful.
I am probably close to a solution but don't have the background to make the last few steps. Can anyone else assist me please?
Have I just a typo in my test.cpf file (on the URL there is a message about the script containing a typo error - I couldn't spot it though...was it fixed?)
All help is greatly appreciated and would deserve a beer or a cyber equivalent.
Many thanks,
PianoSam.
Could you post the wap-provisioning source you used? So I could check for a typo or sumthin.. I've done the same thing as the blogg describes, and it works fine with me..
I on the other hand, wanted to restrict wceload being loaded via Activesync->Add/Remove programs.. but it seems like RAPI doesn't use the same disallowrun settings etc..
But post you cpf file or you code.. and i'll take a look at it.
Hi,
Thanks for the assistance. I have attached a small zip with the various bits and pieces that I have.
My file is the test.cpf file. What I actually wish to do is to prevent Pocket IE from loading...although my test tried to control the clock.exe file.
all assistance is greatly appreciated and you have already renewed my hope that I might be able to do what is needed...
Thanks,
PianoSam
I'll have a look at it.. but it seems that the Test.cpf is just a doc or a rtf file you've renamed? You know this isn't a "cpf" file that wceload.exe can recognize?
I'll have a look at the registry settings within the file and build a cab/cpf file .. so i can test it... i'll let you know how this goes.. unfortunately, i can't reply before tomorrow.
I didn't realise...
Thanks for your help. I just created my test.cpf in word by cutting and pasting the xml script from the url.
I saved as utf-8 and thought job done. Sadly not.
So what should I do instead? forgive me but I don't know the steps to make a suitable cpf/cab file.
Once again THANK YOU for your kindness,
Sam.
i just put together a cab file (for personal use) to remove sms threading (due to upgrading roms alot etc)
however i have hit a brick wall.
i do not know how to make the device restart after install?
i have compared to other cab files but the only difference is the other cabs install files not registry?
i'm not all that good with programming however i would really like to complete this cab for ease of reloading a new rom - so any input would be grateful - thank you
For cab file creating i use PocketPC Installation Creator. In the menu there is a check box to set the 'reboot after installation' behaviour. I played with it but noticed that my device only rebooted after installation of files. Because i found it to much effort to look into it, i didn't. After all it is quite easy to reboot manually.
You could use MSCEinf to examine different cabs and look for the reboot after installation setting (http://www.codeppc.com/telechargements/msceinf/msceinf.htm)
I also noticed that some people make cab files from .xml files (sleuth for example). Maybe this method has other options than cabarc in combination with inf files.
Cant give you any answers, still hope it will be of any help.
Good luck and post back result if you figured it out.
Arjan
The easiest way tocreate CAB files is to purchase a copy of WINCE Cab Manager from OCP Software
they have just released a new version which supports Vista
i created the xml document then created the cab from it.
should have said that sorry.
so i was looking for a way to restart device via the xml..
thanks for the input so far
Intro
Lately I've seen a lot of posts by people who are trying to replace WM internal or driver DLLs, either for hacking/testing or to release. Aside from the possibility they are just doing something that won't work in the first place, I've seen failure a lot of times because files aren't properly signed, or if they are, the certificate in question not being in the right certificate stores for it to have any effect. On some ROMs it will still work due to patched NK.EXE, on others it won't, its just not very reliable.
So, I present you with the correct way of doing this by means of a small tool that will do this for you: DriverWiz. It will take care of most of the stuff, and leave you room for additions. You will however still need some basic knowledge of the command line, if you don't have that, you have no business doing anything like this anyways.
Background
I use this technique myself all the time. When just hacking away, replacing system DLLs to trace calls, etc. It's also the same method used for the HTC-CA drivers and the ICS installer. This method works on most stock ROMs as well, though not on all of them (in rare cases some security policies are set that will prevent CAB installation)
Usage
It's fairly simple to use. Just extract the attached zip file somewhere, open the command promt, and change directory to where the zip was extracted. That's the installation part.
Now when you actually want to build a CAB file from a DLL, you use the DriverWiz.bat file.
DriverWiz v1.0 by Chainfire
Usage:
DriverWiz.bat "Description" "CAB-name" "DLL-name-1" ["DLL-name-2" ...]
Examples:
DriverWiz.bat "New DDI" "ddi.cab" "ddi.dll"
DriverWiz.bat "Two DDIs" "ddi.cab" "ddi.dll" "ddiaux.dll"
Click to expand...
Click to collapse
DriverWiz will take care of signing the DLLs, inserting the certificate, etc, and you will end up with a proper CAB file for this kind of thing. Just copy it to your device and run it to install.
#1. You need to put the DLL files in the same folder as DriverWiz. Do NOT include paths in your DLL names
#2. Include the quotes in the command like in the examples!
#3. The first time you install a CAB made by DriverWiz, your phone may still give you a certificate warning. This is normal, don't worry about it.
Caveats
While this method has never failed me yet, it is possible that some files cannot be replaced this way. Just a disclaimer
Modifying
DriverWiz bases the inf file it will create to build a CAB from on DriverWiz.tpl. If you need to add registry entries to your CAB file, modify DriverWiz.tpl before you run the batch file. You can make other modifications too, add files, etc. Just take care that you don't break it
You can use your own certificates as well, instead of the supplied "Dummy" certificate that comes with DriverWiz. The files you will want to modify/replace are DriverWiz.pfx (used for signing) and DriverWiz.xml (used for injecting the certificate). I'll see about finding a reference for how to do that online and posting the URL here (someday). Creating a new certificate from scratch can be a frustrating effort - make sure you got openssl handy
Changelog
19.03.2009 - 1.1 - Added some file exists checks and attribute changes
Download
Temporary PlaceHolder for more Info.
Whoo this is hot from the plate, looks very promising!
Driver testing withoud cooking! joohie
Well if you replace the wrong files you're still going to need to hard-reset to boot. I advise KITL before you do
Works flawless. You tha man.
Didn't work for me trying to cab up No2Chems Fast Charge battery divers.
ruskiyab said:
Didn't work for me trying to cab up No2Chems Fast Charge battery divers.
Click to expand...
Click to collapse
What exactly happened? Attach the files and such
It made the cab and all, but when I went to install it, the unsigned error message popped up just like when I tried it with WinCE cab manager.
That is perfectly normal behavior. The first time you install a CAB with this certificate it will not know the certificate. However, once you install it, the certificate will be injected in the right place, and the files signed with the certificate (the driver files in the CAB) will be allowed to be run.
It won't happen the second time you try it
So if I try to install it again, it'll work fine? is there aa soft reset required in between? I can replace these drivers manually by renaming the old ones and copying them over, the whole reason I want a cab in the first place is to facilitate the UC process when I flash a different rom
ruskiyab said:
So if I try to install it again, it'll work fine? is there aa soft reset required in between? I can replace these drivers manually by renaming the old ones and copying them over, the whole reason I want a cab in the first place is to facilitate the UC process when I flash a different rom
Click to expand...
Click to collapse
Actually it should just work the first time. Just click OK when the certificate error appears.
Nice nice nice work!
error message
I got error messages when creating a cab from a rilphone.dll. Does it mean anything, or are these errors okay? I guess I'm specifically wondering about the SignTool error. If its okay, then my cab should be good.
EDIT: I think I found the problem. I didn't have UAC disabled in Windows 7. I tried it again, after disabling it, and it works fine now. Thanks for the easy to use tool!
syntax for registry entries?
I was experimenting with creating a cab for the Rogers folks who need a specific rilphone for their Caller ID to work. There are some registry entries associated with this feature, so I was wondering what the correct syntax is for putting the registry entries into the .tpl file. I've tried a few different ways, and I've either a gotten a 'Registry section is empty' message, or a 'Registry has an unsupported registry root key' error. I'm sure its something really simple I'm missing, so any help you can offer is appreciated.
It just seems that since we now have this easy method to sign these dlls, so that they can be used in any ROM, that the Rogers people shouldn't have to jump through so many hoops to get it to work.
EDIT: Nevermind. I'm an idiot that didn't do a little bit of research. All is well now.
Excellent stuff, Microsoft may rant about this way of distributing signtool and cabwiz though.
Chainfire said:
You can use your own certificates as well, instead of the supplied "Dummy" certificate that comes with DriverWiz. The files you will want to modify/replace are DriverWiz.pfx (used for signing) and DriverWiz.xml (used for injecting the certificate). I'll see about finding a reference for how to do that online and posting the URL here (someday). Creating a new certificate from scratch can be a frustrating effort - make sure you got openssl handy
Click to expand...
Click to collapse
Here's an intro to cert stores for WM:
http://msdn.microsoft.com/en-us/library/aa458010.aspx
pfx generation is a 2-liner with openssl:
# Generate a CA certificate
openssl req -new -nodes -x509 -days 9999 -newkey rsa:1024 -md5 -keyout cert.key -out cert.cer -subj "/CN=DriverWiz"
# Convert to pkcs12/PFX format
openssl pkcs12 -export -in cert.cer -out cert.pfx -inkey cert.key
got error messages under vista sp2, any ideas?
I also get an error saying that the latest version of CAPICOM.dll is missing. The ones I can find for download from the internet are version 2.0.0, and the tool requires 2.1.0.1 or later.
Does anyone have the needed version of the dll?
EDIT: Found it, 2.1.0.2 version of the dll is in the attachment.
Time Saver !
Many thanks; DriverWiz /w the CAPICOM.DLL saved me about an hour of troubleshooting.
Cheers,
Thanks for the capicom.dll Even after disabling UAC in W7Rc1 it wouldn't go, so great to have it posted to.
Chainfire, which format should the Reg's be added?
I tried the default .reg formating just under:
[Registry]
[HKEY_CURRENT_USER\ControlPanel\Profiles]
@=""
"ActiveProfile"="Normal"
?
Scrap that i found the .inf format
[AddRegistry]
HKCU,"New Key","",0x00010001,1
Many thanks for this, i'll try to Point Driver replacing Sinners from now on to here.
Well INF files are a regular female dog.
If you rather use WinCE CAB Manager, the trick is easily done as well. I do not have it handy right here (I'm not at dev box), but it goes like this.
Put the DLL's and EXE's that need to go in the CAB into the same folder as DriverWiz
Execute the following command from the command prompt in the DriverWiz folder: signtool sign /f DriverWiz.pfx *.exe *.dll
Open your WCM/CAB with CM
Somewhere is an option for "Pre XML" (main screen IIRC).. click to add/edit, and load the DriverWiz.xml file
Save
signtool sign /f DriverWiz.pfx *.cab
Et voila. I should really make an update to DriverWiz to include CAPICOM and write a proper guide on how to do all this manually (including making your own certificates and such). It's easy if you know how
If you could insert another empty post for me at the top, that'd be great.
I try to create a program which consists of
.asx files (to show online tv channels),
.lnk files (shorcuts to the .asx files) and
a .dll file which contains only some .ico files (icons of the tv channels).
I added all these files to a cab using WinCE Cab Manager and tried to install it on my ppc. So far so good. The problem occurred when the message “The program can not be installed. Choose another location” appeared during installation, just after the process bar was filled.
Although I have no idea about computer programming, I have created many cab’s with WinCE Cab Manager for skins I have created for several programs. Anyway, I realized that the problem occurred due to the .dll file, since this is the first time I add such a file in a .cab.
I created my .dll file using a .dll from another program which had only icons in it, as well. I deleted them using Restorator 2007 and I had an “empty” .dll sized 4KB. Then I added my icon files using XN Resource Editor.
I searched the Internet to see what might be the problem with the .dll and I found out that I have to “register” my .dll file. I really have no idea what this means but it needs to be done. I also found an option in WinCE Cab Manager for “self-registering” file, but it didn’t work either.
So, the question to you dev guys is how can I register my .dll file, or should I create it from the beginning with another way?
Please help! Thanks in advance!
sorry to repost but it seems that posts keep coming in this forum and this thread is already in the second page and I'm afraid that noone will see it and reply to it. By the way, is there any special sub-forum for such questions?
This may help. I use his instructions to edit existing DLL's
http://www.modaco.com/content/i9x0-...88904/lisbian-taskbars-for-i910/#entry1023568
It will unsign the dll which will probably fail on your custom dll but it should sign it when you are done editing.
NilsP
Many thanks for your suggestion but unfortunately it didn't work for me.
As you said, this is mainly for resigning already signed .dll files.
Any other help will be appreciated. I can attach it here if anypne is willing to help. Or just tell me the way. Thanks!
I deploy a few dll's with my app, without any problem. If the installer complains about the location, what did you specify where it should go?
There are 2 approaches to solve this problem:
1.) If you have a private key to match a certificate in the device's certificate store, sign the .dll and .cab with this private key and it will be installed with elevated privledges, and be successful. To facilitate this you can install the "SDK Certificates" - and sign with the matching private key (you should be able to find these on a search, term "SDKCerts" or similar)
2.) Look for an "Application Unlocker" or other security reduction tool, run it, and you should be able to install the cab. On this note, if you check here, it will give you a more technical overview of the security policies. You want to change 4101 / 0x1005 to "SECROLE_MANAGER" (8) - which tells the system to install it with elevated privledges. Also make sure 4102 / 0x1006 is set to 1 to allow unsigned applications.
6Fg8
I don't believe that is the location I specified that causes the problem because when I deleted the .dll file from the .cab, it was installed properly. How do you create your dll files? With programming or you just edit existing files? If I send you my .ico files, will you be able to create the .dll file for me?
Da_G
Thanks but both approaches seem very complicated for me!
So, will I need Visual Basic in order to do this or is there any easier way? Can anyone sign the dll for me?
angelos_cy said:
6Fg8
How do you create your dll files? With programming or you just edit existing files? If I send you my .ico files, will you be able to create the .dll file for me?
Click to expand...
Click to collapse
Yes with programming, C++ or .net. Never had any issue with signing. I can try to make a dll if you send me the icons (or post them here if they aren't too secret ).
6Fg8 said:
I can try to make a dll if you send me the icons (or post them here if they aren't too secret ).
Click to expand...
Click to collapse
I have sent them to you by pm. They are not secret at all but I will create a "program" (wannabe ) with that dll and I want that program to be a surprise for users of the forum where I'll post it. I may post it on xda too, but it's nothing important.
Many thanks!
angelos_cy said:
The problem occurred when the message “The program can not be installed. Choose another location” appeared during installation, just after the process bar was filled.
Click to expand...
Click to collapse
This happens because you've changed resources in signed file, which changed file checksum and invalidated it's signature, and Windows installer refuses to install file with invalid signature. But it won't refuse to install this file WITHOUT signature at all - so use unsigner (search for it on XDA) to remove signature completely; if you encounter error, try to remove signature from original (unmodified) file, and then change resources in it...
6Fg8
the_ozyrys
Thanks to both of you!
6Fg8 has created and signed the dll for me and it finally worked, but I also tried the_ozyrys' method and it also worked.
So thanks to baniaczek too, since he created the unsigner.exe.
Everything worked fine with the dll. Now the cab is installed properly.
However, I have another problem. Just after the installation of the cab on my ppc, it seems that the device freezes for about a minute. This is propably because my cab contains a lot of shortcuts (.lnk files) that go under Programs folder.
So, I would like to ask for another favour, if it's possible. As I said I intend to give this cab to others too. Since this delay can make them believe that my program has freezed their device, I would like to make the cab restart the device just after installation and after uninstallation as well. I think this is made with the "Setup.dll" which I don't know how to create.
If anyone knows how to do this and has the time for it, could you please create this setup.dll for me. If the cab is needed to do this, just tell me to send it to you.
Thanks in advance!
Anyone? Plzzzzzzz!
If you want to sign .dll or .exe u can use the apps posted in the two posts below
http://forum.xda-developers.com/showthread.php?t=432041
or
http://forum.xda-developers.com/showpost.php?p=3530246&postcount=18
raykisi
Thanks for your answer but 6Fg8 and the_ozyrys already helped me on that.
My question now is how to create a setup.dll in order to make my .cab to prompt the user to restart the device after installation and uninstallation. If anyone can do it for me, I can send you the .cab which I alreday created and you can add the setup.dll with those functions.