Corrupted Rom and Bluetooth files? - JAMin, XDA Neo, S200 General

Please help. I had a hang when using my bluetooth on my Dopod 818 pro. It suddenly hanged the other day when I was trying to turn bluetooth on. So I reset and now boot takes over 5 mins on the splash screen and I cannot enable bluetooth. I tried hard reset and replacing the rom, but still get the same result. I have installed extended rom but I don't have good files to replace the bluetooth files and I don't know which files are the bluetooth associated files. Any suggestions? or help? Thanks.

Related

System Freeze + Can't even hard reset

I have problem with my XDA II which is just been upgraded to 1.66 Chinese ROM. The problem is the machine will freeze right when I turn it on. It only shows the last screen when it shuts down with the automatic shut down setting. No buttons will work at all. This happens about once per day. I was not able to softrest or hardreset. Only if I take out the battery and put it back again, the PDA will hardreset by itself. I had no such problem with the old 1.52 Chinese ROM version. Is anyone experincing the same problem as my? Does anyone know how to stop it from happenning again?
same problem system freezes
I have SX56 I have installed some wav file from net but after some when I hardreset it the system got freeze and now I am not able to start the PDA no buttons are operating please help if any one has got the same problem

PLEASE help on my Dopod 838

i recently bought a dopod 838. i used it for 2 months. it went smooth but now i have problems.
1. It would take me 4 minutes after Startup is finish( Sometimes i got stuck on the startup)
2. My computer cannot detect my device via USB for upgrade and activesync purpose even on bootloader mode. i cant reflash it.
3. My unit has a strange High Pitch System Music. like pop-up menus.. etc
4. Bluetooth cannot turn on
5. GSM feature is missing..(when i inserted my sim card NO SERVICE will appear on the status)
I did nothing,nothing at all nor crashed from a ROM upgrade. Im using IPL/STL 2.21. Hope you could help.
did you overclock?
can you Hard reset to confirm hardware problem?
yes i did hard reset it.. still having some time to boot..
rus .. you posted this thread 3 times.. lol...
sorry for mutli-posting... hope someone can help

(htc elfin) reseting problem

hello,i got a big problem when i turn my htc it turns on and is alright for the moment, but after when i try to turn wifi on or audio manager it hang on and next turn of or i need to do soft reset,sometimes it vibrate and turns of after when everything load up,please help me solving this problem.
ms2405 said:
hello,i got a big problem when i turn my htc it turns on and is alright for the moment, but after when i try to turn wifi on or audio manager it hang on and next turn of or i need to do soft reset,sometimes it vibrate and turns of after when everything load up,please help me solving this problem.
Click to expand...
Click to collapse
I would have probably just done a hard reset to see if that solved the problem. This would be too annoying for me to handle and I wouldn't want to put up with that. I don't know what apps you have installed but perhaps you have something trying to launch at the same time when you turn WIFI on or Audio Manager - Strange that it happens for both of these. Perhaps you have apps trying to obtain updates or trying to connect to internet automatically once you turn WIFI on and this is causing your system to become too slow and unresponsive as it is trying to do too much at once. (doesn't explain audio manager I know) - I havn't experienced this problem myself thankfully -
now when i try to turn it on it needs few times just to boot up but when it boot up it is just hanging up after few seconds or minutes i have done few soft reset and hard reset and it doesn't help i don't know what to do.
That sounds buggered to be honest. Seems like a hardware error. I've dropped mine from about 50ft before, but it was grass. So I don't know how it really affects it. You say it vibrates when you try to turn it on?
Well, first thing I'd try is taking the battery out, then a hard reset. From then on, flash a different ROM and hard reset again after.
but i don't know how to flash the rom can you send me a link to instructions coz i am new on this forum,already i founded from the opal one,but i can't find a instruction under,can you help me.
ms2405 said:
but i don't know how to flash the rom can you send me a link to instructions coz i am new on this forum,already i founded from the opal one,but i can't find a instruction under,can you help me.
Click to expand...
Click to collapse
http://wiki.xda-developers.com/
Start reading through the WIKI to learn about flashing ROM
Do not flash OPAL Rom to Elfin - ROMS are device specific ELFIN ROM for ELFIN Device

Renamed pim.vol now phone stuck on boot screen

I wanted to remove all the contact from my HTC, so following some postings on the net, I renamed my pim.vol file to pim_old.vol and turned my phone off, then back on. Apparently it should then create a new pim.vol file.
However, my HTC has been stuck ont he Windows Mobile boot screen for at least 10 minutes now.
Is the phone screwed, or would you expect it to take a long time to reboot?
Thanks.
Also, it made a 'pleep' noise when it brought up the Windows Mobile screen. I don't know if that is significant?
Hi there
Did you try soft reset, hard reset, take the battery out ? If yes can you get into bootloader and be ready to flash another rom ?
Hi,
yes I have tried all of those things.
Even after a hard reset it does the same, gets to the Windows Mobile boot screen and stays there. I don't think it gets far enough into the boot to connect it to a PC, Activesync said there was something missing and couldn't connect.
Hi
This is strange as you just renamed a windows file which should be corrected by a hard reset
Hard reset again and be patient (give it some time )
if not corrected Try flashing a rom from SD card
I left it for an hour after the hard reset, and still nothing. I had to take the battery out in the end to turn the phone off.
I have no idea how to flash from a ROM on an SD card?
I think you'll find the answer here http://forum.xda-developers.com/showthread.php?t=406721
Good luck
If you hear the beep sound, you should be able to plug in your USB cable and activesync will know that your HTC is inserted.
I have tried that but ActiveSync says there are components missing and then won't connect to the phone.
Reinstalled Activesync?

Ipaq 614c wifi missing

Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
This should correct the missing WiFi issue: http://forum.xda-developers.com/showpost.php?p=3791117&postcount=191
Hi Kiemlo
Unfortunately the key is 1 already
I try change key to 0 but results is wifi missing still
Any idea ?
Thx
what happened to cause it to be missing?
did you flash the phone witha new ROM? install a program recently?
Have yuo tried doing a FULL backup then a hard reset?
Yes I think that wifi just disappear after some ROM flashing.
But I try to flash all ROMs which I have before and WIFI not appear again in no one ROM.
I try hard reset without backup(by the menu factory reset and by voice comm+power+reset) with same result - wifi missing.
Hi,
My current rom removes wifi from the list when its connected to usb or activesync. When I unplug it automatically goes back to the state it was before, either powered off or on_and_connected!
Also, use radio rom 0.89, with 0.88 and 6.5 i had no wifi, it was present in the list but could not see any SSID's.
Cheers,
Balint
Yes I know wifi can´t activate (grey text) when its plugged to USB.
But in my case don´t matter if its plugged or unplugged - WIFI option is missing(not only with grey text)
radio is 0.89 and OS is 6.5 so there is something else broken
Not that this would help much, but I had a similar issue with my 914c while using HP's default OEM 6.1 software. The Wi-Fi used to vanish from the Comm. Manager every so often. For what it's worth, a couple of soft-resets would fix the problem sooner or later (for me, anyway). I'm using Montecristo's 6.5 now and haven't had the problem since.
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
bluejay23 said:
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
Click to expand...
Click to collapse
I usually run into the same problem after ROM updates. Switch it off, remove the battery for a minute, insert the battery back in and hard reset fixes it always.
Regards
Flash original ROM with downgrading radio to 0.88
Sergious: unfortunately - this wouldn´t help.
even if yes, I can´t stand original ROM
I´m going to try Montecristo ROM
Best regards
Not working WiFi is a radio problem, not ROM. Link that i gave will downgrade your radio to 0.88, then you can flash any rom
PS. Montecristo ROM ?? It is for 914...
oh I miss that so next flashing will be with keyx roms still
I will try some flash and resets by the night ...
what goes around comes around
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
bluejay23 said:
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
Click to expand...
Click to collapse
I had the same problem with 23001 Beta 13.2 WWE, the WiFi was initially disappear from my Wireless Manager, then i change this : my network card connects to - The Internet (default is work), and the WiFi is now again show in Wireless Manager, but can not switch on, so after soft reset it works ok...
Zemun_PFC : thanks you for your advice - its so close to solve my issue.
I did what you say and
1) after soft restart BLUE LED blinking(means some wireless active - BT was off before restart so I suggest WIFI will be working) BUT
2) when i go to SETTINGS/CONNECTIONS/COMM MANNAGER and click on wifi -> waiting icon then nothing happened - STILL only TURN ON - BUT SHOULD BE ON already => so on/off trigger doesnt work
3!!) when I´m in COMM MANAGER and click on SETTINGS in bottom right corner I see WIRELESS LAN - this not happened before!!
4 when I´m click on it it show only BLUETOOTH and PHONE settings :/
You helped me a few with it
I must solve it
bluejay23 said:
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
Click to expand...
Click to collapse
some of my roms (older version) had a issue when you use a2dp and turn off bt. Restart then device.exe will take most of the cpu
Keyx : yes you are right - I flash another one from you, now is device.exe issue cleared.

Categories

Resources