I've got the infamous fuzzy screen problem when my Atom (with Exec ROM (AtomExec) Edited_Xda-Atom-ENG-20060614_R060428N_EX0018_for_Atom)
battery died last night.
There was a way to fix it here but alot of posts have been removed wince I was last online. Can anyone tell me how it was done please?
no way. sorry.
Please don't post if you don't know...
I have just done it. What to do is flash the normal Atom ROM on, then flash the Atom Exec one on and it's all fixed. Just for people that are wondering
You so funny!
The thing that you describe help you until your battery died. After this you will have same problem. It isn't the solving the problem. And I know what I posting... but you - not.
Yes I know, that was what I was referring to. Sorry I didn't make it more clear. Guys this is a temporary fix...you WILL get the fuzzy screen next time the battery is removed/runs empty.
Related
Hi all
About 4 weeks ago my XDA 2 was out of Battery and i wanted to charge it in the craddle. But when i put the XDA 2 in my craddle (with attatched power supply) the status led only turned RED and nothing else happend. After 30 minutes the status led turns off. I can not power on the xda, not with a soft reset and even not with a hard reset. So i thougt that the battery is maybe dead (too old or whatever ) and i bought a new one....but..... still the same problem!
When i charge the battery directly in the craddle (that works! led on the craddle changes after a few hours from orange to green) and put it after that back into the XDA 2.......... nothing happens....
please help
Hi,
I have the very same problem since month ago, I upgraded to wm2k5 2.03.32wwe, did a change in the system, and after 24h, my phone went dead
Did you do a rom upgrade or in any way altered something in the system? Let us know if you get it work, ok?
J.
The only ROM Update i made was the official one from O²... And this was half a year ago.
Well but..... I SOLVED IT! But i cannot say how... The only thing i've done is that i opened the XDA2 and deconstructioned it in its parts... Well and when i "just for fun" tried to connect the battery to the battery connectors..... DING DING So i assembled it again and now it works fine!
I also cleaned a lot of dirt out of it, maybe this was the reason. I will keep an eye on this...
But thanks for your efforts...
Greetings Ben
Da*n it, you lucky guy,
I wish I get off with such a simple solution. I do not have the right tools but I am out just now and getting the things I need. Fingers crossed
Red light means, you have problem with battery. At first check, if you have closed red lock on the bottom of battery. There is no switch to sense rear cover, so, it doesn't matter, if it put or not.
If battery is installed, lock closed, but you still have red light - try to obtain for a minute working battery from another Himalaya and have a try. If it does not work too... seems it's a hardware problem there.
Same thing happened to me I just took the battery out and left it for a few minutes then back in and it works
John P
Thanks for your reply guys. I've tried everything you guys suggested, but I've been unsuccessful in starting my PDA. It's been like this for 2 months, I've tried taking out the battery, changing the battery etc, but still nothing. So I figured out it's probably a problem with the b/l mode, since I'm unable to enter b/l at all. I gave it to of mine who's a little more tech savvy, he's got the right tools to take the chip out, and if he can manage to flash the b/l. Has anyone done that. If yes, please advise. My friend has fixed some BIOS's for laptops etc, but this will be his first PDA. He said that he doesn't have a board for the PDA chip but will try to work it out some way around. Perhaps someone can advise me where to get that board from?
Anyway, I will keep you posted,and if you guys have any more ideas or experiences, please share.
J.
Hello Friends,
I have some small problems with my imate jam..its lyk,my phone switches off every five minutes no mater the battery it has..also..i hear to 10 audio every day..and talk about 20 minutes..by this usage,the battery drains out fully..i have doubt that,if i change the battery,will this problem of restarting be resolved?..or is it a internal hardware error?,yes the back panel is intact..and tight.
i figure out that its the battery problem..but i need some help..by the experiences.is this problem due to battery?..because,when connected to pc,it works fine..(hope,there is no hardware fault here)
also,I see that,as the phone drops(once), the phone had a reset..is this normal???
Thanks My friends!!
Sean
ok people..atleast reply...battery problem..or sum other....please..it is really importnt and urgent as i was planning to sell it off based oin the problem
cmon man..rather than reading..Why dont you post your experience.
Hi Sean,
Sorry for a slow response, but the rule here is search and then ask!
Anyways, according to your previous posts it seems that there is a problem with your device battery. Consider replacing the battery with a new one. It will hopefully rectify your problem.
Yeah. When a Magician drops, it generally goes to a reset. Thanks to the anti-shock mechanism.
Thanx for the suggesstion,yes im not new to this forum..i searched the forum,but cudnt find a similar post ..(well answered)...and i m realy thankful for your reply..Than ..Sean
try switching ur battery wid a friend whose havin a same model as urs....as far as i think...its a battery problem.
Firstly I have to say sorry for my English ,my mother language is not English and my English is so poor. -_-!
I buy a SPV M3100 3 months ago.It performs good before, but now I have a problem.
After using a not long time continuously, it begin to click the 'X/OK' on the right-top automatically, so I can't run any program.The program I opened will be closed for that.
When this problem occurred, the phone being a little hot.If I turn off my phone and pick out the battery, it will performs well for a moment.
I have searched this problem, and find someway to resolve it.There is two way,the first method is remove some two Triode beside the cable of screen,the second way is add two 103 capacitance in somewhere nearby.
I don't know whether that's right, and I hope someone would help me to resolve this problem. Now the only thing I am sure is it' something wrong with the mother board. - -#
I am very distress with this.I know it's an old problem, but I still can;t find a certain way to resolve it. - -
Help me, please!
Thanks for your help and reading.
Hi, this is my first post here I didn't have time (and will) to read the rules and everything, so I just hope that this is the right forum for this kind of request.
Since you guys have showed up to be people with nice expertises, I request your help to avoid going to any support center and spend money for something that by lucky means, may be fixed at home
The problem is that when doing some operations, the device freezes and no action can be done, whatever button I press or wherever I click with the stylo.
The only thing that can be done to restore for a while the correct functionality of the device is to remove and reinsert the battery.
I don't know exactly when this problem started to show up, because the device isn't mine, so I don't even know what can be the possible causes.
I have also to say that this problem occurred few times at the beginning, but now it happens more and more often making it impossible the use of the phone. Sometimes I even can't turn it on.
I've tried to substitute the battery, but with all of them, the problem remains.
After that I've tried the software reset, didn't solve anything.
The hardware reset didn't solve anything either.
I thought then that maybe the operating system was going nuts, so I tried to flash the device putting WM6.1 Stratos FE+ on it (of course, following the guide and without doing anything wrong), but nothing changed.
I don't know what else it could be, so before throwing this piece of garbage in the bin I ask here for the last sentence, if you can help me.
I have some pictures attached of the phone freezing and the screen tearing up (looks almost like The Matrix movie).
Thanks in advance.
Hello,
From my experience, i think your problem is due to CPU overheating.
There are similar threads on this forum, regarding your problem.
I advice you to check those threads.
have anyone fix that problem? i have the same problem, but 3months before i put a rubber between the cpu and the metal cover and it worked, but now again and the rubber dont help anymore
I didn't do anything still on my phone, I am waiting that somebody gives us an answer
The only thing I did was to reduce the backlight brightness, according to the problem this guy has on this other thread -> hxxp://forum.xda-developers.com/showthread.php?t=596927
But the only thing I've got after this is that the phone lasts a bit longer before crashing
trinity
also here.
somethimes I must leave it without battery an hour or so to power up again.
nothing help. reinstal everything twice. even in stand by it freeze...
it's a wtf problem .....
also I'm very curios for some remedy. I incline to believe it's a hardware problem .....
please if anyone know how to fix that problem then say it here please
I have same model and same problem, When i press and hold central navigation key and power key it power on,and it work,few minutes....
On Monday I will overheat cpu and you hear the results ... hopefully positive
yes, please let us know. And what you mean overheat the cpu? How?
I want to fix mine too...
Thanks !!
Dear friends, problem solved ... overheating of components on PCB...
for all the info: [email protected]
really? hey what did you do ? please tell us.....
THANK YOU!!!
I have exactly the same problem with my htc can any buddy help or any sujjestion in this regard.
I have the same problem however
First, I flash back to ship ROM WM5
Second, I try to increase CPU speed up to 420 Mhz by using Pocket Hack Master
http://www.wizcode.com/articles/comments/pocket-hack-master-speed-configuration-guide/
Everything is testing, if you have your experience pls share
File as attached:
1. Install *.CAB
2. Copy patch file into folder
I join with the same problem.
Nobody has an idea how to fix that error?
@ivanish: can u please share your solution!!
how u solved that freezing problem ? plz can u share ?
thinh30 its overheating problem of cpu as i experiance this freezing problem when media player is in use for long time or during usb connection with pc
i think cpu speed should be lowered to avoid overheating and not increased
it's not that , the screen connector is destroyed , i have the same problem , it's not CPU , use search , there were solved this problem few years ago
My HTC Touch HD drains out of battery in about 30 minutes (yeah, that's right) and it doesn't charge to 100%, only 99%. I asked a phone store to do something like a "power shock" to my battery, but it seems that the battery is still stuck on 99%...
I have radio 1.17.25.09, Cloudy ROM WM 6.1 version and of coursre HSPL 1.56 OliNex.
This started happening when I got back to stock (don't ask why) and now it's just like this... Can it be a radio problem? I see some people saying that raios 1.14 have good battery but I don't know because 1.17 was working fine for over a month... Any help would be gladly apreciated,
mfsr98
maybe you need a new battery
Since you posted here, I can say that I bought one and it should be here today. Lets see how that goes...
Cloudy 6.1 has a long battery life. Radio doesn't matter.
Must indeed be hardware.
Yes, I know. I even tried flashing a different HSPL so...
screen problem
after an unexpected problem with my screen i had to reset rom in order to calibrate my screen.
After that my phone batery doesnt last and my screen didnt respont properly.
I have already intalled (just trying to resolve the screen problem) several roms but the problem got worst. now even thought orange rom is running properly my phone screen doesnt work at all. Any help?
First off, you shouldn't be posting this here. Anyways, it should be a digitizer problem. So, you will have to replace it
play with too much android and it may make your battery age faster, so that could be a cause.
Um you didnt post if you fixed it with the new battery, since my battery is old and needs a replacement, I want to know if it will work?
I didn't get my battery yet. And I want to tell you that this doesn't offend me, but for some people always using Italic on the letters offends them. Just type and send what you want
What is so offending in using Italic, its my way of typing?
why is it your way of tiping? isnt it just easier to type and go? It's offending because it looks like you are "complaining" with a person because of anything. I'm gonna say it again, it's not problem to me, but it's offending for others..
Well whoever has a problem, come at my face and tell me, since you're the first one that says anything like this to me!
Obviously no one will tell you that, but somebody could take what you say wrong in the future
Mfsr98, one sentence too much there. Shooting each other on the net may send wrong msg. For some ppl italics are how they speak (be it nice fonts or making what they say more easily recognised by the human eye). By saying a statment so directly like that other people may catch the wrong meaning... Just give and take... Replying to his query would suffice and nothing would happen...
Sent from my Kamen Rider Faiz Gear
Nobody is mad with anybody, I'm not mad with him and I think he is not mad with me either. I was just giving an advise because this is what I see from the situation.
I'm not gonna say more - it's only getting worse.
IN MY EYES mfsr98 WAS GIVING FRIENDLY ADVISE. I like good advice
lol HTC0017.
HI, did you get your new battery? Where did you order it?
Hi, just got the battery (but still need to go get it home). I bought it here: http://www.ebay.com/itm/1350mAh-Li-...043169?pt=PDA_Accessories&hash=item56441e9821 It took about 15 days but it came :/