Related
cant sync my xda2 thru BT (billionton) with my PC...
does anyone have the complete procedures in pairing process.
thanks.
http://forum.xda-developers.com/viewtopic.php?p=66931#66931
BT serial port problems
ive checked the guidelines in the url, but i still cant make my xda2 and pc listed to same com port.
ActiveSync via Bluetooth
I had hours of 'fun' with this problem. I've got a WIDCOMM 'I-Tech BT Dongle'. Although I believe many of the manufacturers use the same software, XP was quite persistent in disabling and overriding the software that came on the CD with its own driver...
Firstly, delete your partnership with your PC and Xda. Right click on the BT icon in the system tray and select Open Bluetooth Settings. Click the COM Ports tab and delete any listed ports. Click Add, select Incoming and click OK. This will install a new COM Port.
Now create a partnership between PC and Xda. Be sure to initiate it from your Xda and accept on your PC - not the other way round.
On your PC, open ActiveSync and click File, then Connection Settings. Make sure the 'Allow Serial Cable...' box is ticked. On the drop-down menu below, select the COM port that was allocated when you installed it via the Bluetooth Settings COM ports tab. Click OK.
On your Xda, open ActiveSync and select options. Ensure, from the list, the computer it is going to remotely connect with is your PC (my laptop is on a WLAN and it listed the other computers that are in the network - although you can't sync with them - I tried!) Make sure 'Sync with this PC during manual sync' is ticked. Now click options below. Select ' Maintain connection' and exit back to the main ActiveSync screen.
Click tools, click connect via Bluetooth and you're away! Unfortunately, you can't use the connection for anything else - such as email or web.
hi,
I can't use the bluetooth conection to surf Internet in my WinXP SP2 pc.
I have updated usb bluetooth adapter drivers (WIDCOMM) and ActiveSync to 3.8.
I know that SP2 have some problems with bluetooth.
Please, some help?
with ur magician u can only surf internet per Active Sync... the magician has no network bluetooth profile... u can connect per BT to your PC and use AS ?!
Hi ingmar
As you say, i can't' connect then magician via bluettoth with AS. The usb serial port (COM4) is configurated, and this port is set in AS configuration. But AS always interrupt the connection with a error message after a few seconds. With USB AS run ok.
Thanks for your help
Try the following:
On your PC, check the Bluetooth-manager configuration and check which com port number is assigned in your local services tab. Now, go to the ActiveSync connection settings and choose this com port and mark the serial communication check box. That's about it on the PC.
On your PPC, go to Settings->Bluetooth Settings and press the "Start" Button for the ActiveSync over Bluetooth configuration. On the pop up dialog, enable Bluetooth and delete an existing pairment with your PC! After you did this, re-pair the two devices. When finished, start ActiveSync on the PPC and select "Connect via Bluetooth ...". Your ActiveSync connection should be established at this point.
When this is done, you're almost there. If your Desktop PC has a direct connection to the net (via LAN or WLAN), you should already be able to surf the net via Bluetooth. If you connect via DialUP network or similar, you need to configure your Internet Connection Sharing on Windows (only 2000 and XP allow this i think).
Dandie said:
Try the following:
On your PC, check the Bluetooth-manager configuration and check which com port number is assigned in your local services tab. Now, go to the ActiveSync connection settings and choose this com port and mark the serial communication check box. That's about it on the PC.
Click to expand...
Click to collapse
If this com port is unselectable in activesync? what do we do in that case?
I have been toying around with my bluetooth for the better part of a day trying to get it to work. I have installed pocket bluetooth tools 1.0.1 as detailed here http://www.howardforums.com/showthr...9185e&threadid=544932&perpage=15&pagenumber=1 I managed to get the screen with the activesync icon a couple of times during the pairing process. When I went to activesync and selected sync bluetooth I would get a few seconds of connection and then it would automaticaly disconnect without actually syncing anything. I toyed around a bit more and have somehow lost the option to sync via bluetooth in activesync... :shock: I still see the irda option, but bluetooth has vanished. Any idea what I might have done wrong?
@elefas
When the com port assigned by your bluetooth manager is larger than 9, ActiveSync isn't able to use it. In this case, go into your Bluetooth manager and delete existing com ports (both, local and client). Go to your device manager, delete any still existing bluetooth com ports there, check your (physical) serial port and go into its properties. Somewhere there, you can choose which com port it should use. Select one, which is said to be blocked but you actually know it isn't (e.g. Com port 4). Press ok, go back into the same properties sheet and reselect the com port that has originally been selected. Go to your bluetooth manager and press to add a com port (both, local and client). Now you should have a port number less than 10. Microsoft sucks!
Hi,
A few days ago i bought an Orange SPV M2000 (the big PDA sized phone by Orange in the UK). It was £150 ($250) more than the M500 (also know as the Magician), so when i managed to sucessfully create a bluetooth LAN connection on the M2000 and run Skype over it, i decided the extra £150 spent for the Wifi feature was a waste of money so i took it back and got a M500 / Magician instead.
However the M500 doesn't seem to have all the standard bluetooth features. Most noticably the Bluetooth Connection wizard needed to create a bluetooth LAN Connection. The wizard is part of the Bluetooth Manager software.
Does the M500 have a cut down version of the M2000's Windows Mobile software?
Is the M500's bluetooth not capable of a LAN connection?
If I install the latest BigStorage ROM, will it give me the Bluetooth Manager software?
I've attached 2 images of the M2000's Bluetooth Manager software which seems to be missing from my M500.
Any help would be much appreciated?
Neil
the magician uses microsoft's bluetooth stack which is not as good as the widcomm/broadcomm stack found on your other phone, i think there is still a way to connect to a bluetooth lan but you will have to do some searching on the forum.
or
you could by the cheap wifi card from ebuyer like many magician users have and use wifi.
good luck
Rob
Thanks Rob for the suggestion of using Wifi, but if i use the SD slot for a Wifi card, it won't be free for an extra Memory card.
I've had a look around on the forums and haven't been able to find a solution for this yet. Can the widcomm / broadcomm stack be installed into the magician?
If anyone has any other solutions please let me know. Is the M500 / Magician cut down in any other ways? My M500 is still within its 14 day return period so if its not capable of running most Windows Mobile 2003 software i'd rather get my money back.
Bluetooth:
You don't need to create a bluetooth lan connection.
You need to create a virtual serial (com) port with your bluetooth dongle on your PC. Eg Port 7.
Get that set up, then set activesync settings to search the serial port as a connection.
Then on your Magician go to Start > Settings > System > Bluetooth settings.
Click the bottom two boxes, and then click the middle button "start button to setup".
Then this will take you to Start > Settings > Connections > Bluetooth.
Here click on Turn on blueooth, make device discoverable, then tab "Devices", search for a new device (ie your pc), create a bond, set up a passcode (0000 etc), your pc should then show a balloon to say your phone is trying to make a connection and requires a pin. Set that Pin to 0000. Your phone should now bond with the PC.
Next open up Activesync on your PPC, and click Tools menu, Connect via bluetooth.
Hopefully, all being well, you should now connect to your pc via bluetooth.
You should be able to browse the internet, and if you can do that (if on your PC you've got internet pass thru on your activesync), you can use skype.
WIFI:
Bigstorage rom will not change your PPC stack; its exactly the same rom as your original, but with more "Storage" memory. However, I use this, copy any Net only apps to my "storage" and can then pop out my SD Card, put in my wifi, and still have access to all my net apps + wifi. I don't use storage for anything else. Wifi is faster than Bluetooth, but both methods work.
Options:
Have a look for the Blue Soleil threads - this is the Bluetooth stack i use on my PC, but you don't need it. It doesn't do much more than you can do now, and certainly not to apply the above info.
V
Thanks for the reply vijay555,
i too am using the IVT BlueSoleil bluetooth software. Downloaded the latest eval version from their site.
After following your instructions its still not working, but it appears to be almost there. I'll explain what i've done.
In BlueSoleil bluetooth propertiesi've turned Serial Port A (port 6) off and left SerialPort B (port 7) on. All the other services are on their defaults.
I right click the tray icon and exit it. then restart t make sure the services take on the new settings. (must be an easier way to reset services).
I open ActiveSyncs "Connection Settings" and if i select Com7 the Status reads: Com port is not available.
All your PPC side instructions seem to work, but of course it fails to sync with ActiveSync.
Any idea why the virtual port isn't being seen as working? I'm using Active Sync 3.8 & BlueSoleil 1.6.1.4
Thanks Neil
i have nothing to say that helps you further, but just wanted to say that i've had such a hard time doing anything via bluetooth on this phone that its extremely disappointing. after a slew of ipaqs, this is so counter-intuitive and i can't get nothing working via bluetooth, most notably GPRS with a laptop.
sucks....and i feel for ya
futurity- I think for some reason I decided to use the WIDCOMM bluetooth software on my PC. It was a LOT of work, so many reboots and required a safe-mode hack, but supposedly better. From memory, the bluesoleil looked much nicer. There's no reason why a simple serial port shouldn't work.
Try on your PC checking My computer > (right click) properties > device manager > com ports to ensure either Com port 7 is on, activated, or being used by something else.
Try changing to com port 6?
If you double click on the serial port in bluesoleil I presume you get properties showing it's available and ready for use?
Bluetooth does work, and for me: I live in a block of flats and I've got the wifi card, which is painless (although it had problems, described elsewhere on the board!). However, I've got 3 wifi signals inteferring from neighbours and I can't get online from one room away from my router. But the bluetooth signal works for about 10m, through walls and doors, so for me it's a cheap and easy solution. The hardest bit was setting up WIDCOMM, so I only recommend it if you like going to the dentist.
Reply if you sorted it/having troubles.
V
Got it working using Windows XP im built Bluetooth drivers
Hi chaps,
Got it working using Windows XP im built Bluetooth drivers. My setup procedure is still flaky though so I aim to sort it out on a clean machine until i perfect it. Only draw back is that you have to log into a user accout in order to use the Bluetooth / Activesync internet access option.
I'll most likely make the next postin gon Tuesday.
Regards
Neil
Ok, I've finally had time to get the sequence perfected after setting this up about 10 times (most of them failures).
Here is the working procedure, based heavily on the previous posted procedure with some more detailed instructions that worked for me.
PC Bluetooth:
First off you don't need to create a bluetooth lan connection in order to get LAN or Internet access. We're setting up Internet access via the ActiveSync Proxy.
Install your Bluetooth interface into your PC (for me i just plugged in my Bluetooth USB dongle and it installed using XP drivers, but you may need to install specific software).
On your PC task bar (bottom right next to the time) click on the blue Bluetooth icon (called Bluetooth devices on my PC)
Select "COM Ports", then add, then select "Incoming (device initiates the connection)" then OK. This creates an inbound connection that the Magician can use to talk to the ActiveSync Program.
Note the COM port number of the newly created COM port.
PC ActiveSync:
Open ActiveSync
Select File->Connection Settings
Select the "Allow serial cable or infrared connection to this COM port:" and select the port number that you just created.
Magician Bluetooth:
Select Start > Settings > System > Bluetooth settings.
Select the "Inbound COM port:" box.
Then Select the "Outbound COM port:" box. If it asks you to select a device providing a serial interface, click ok,
Then this will take you to Start > Settings > Connections > Bluetooth. but for now close this window by clicking the top right "ok" to close the window. i.e. don't select a new device quite yet.
The Bluetooth settings page should now reappear.
Now press the "Start" button in the middle of the page. Press ok to accept the prompt to select a device providing a serial activesync interface.
Then this will take you to Start > Settings > Connections > Bluetooth again.
Here click on Turn on blueooth, make device discoverable, then tab "Devices", search for a new device (ie your pc), create a bond, set up a passcode (0000 etc), your pc should then show a balloon to say your phone is trying to make a connection and requires a pin. Set that Pin to 0000. Your phone should now bond with the PC.
Magician Active Sync:
Next open up ActiveSync on your PPC, and click Tools menu, Connect via bluetooth.
Hopefully, all being well, you should now connect to your pc via bluetooth.
You should be able to browse the internet, or use MSN Messenger, and if you can do that (if on your PC you've got internet pass thru on your ActiveSync), you can use skype, X-ten Softphone, PocketIRC, etc.
If you have any problems, send me a private message and i'll try and talk you trough it.
Thanks futurity!
It was so satisfying when I got it working finally, and then I still went back to wifi
Very useful info, keep a copy on my PDA.
V
If you have bluetooth LAN connection doesn't that mean you can also access network shares? I don't think that is possible through active sync...
Just curious
Si
Yepp, that's amost the only difference, besides that you need ActiveSync for Internet access and not only a standard bluetooth stack capable of doing it.
One remark on the detailed setup list from futurity: If the device is already paired with the PC you want to sync with, you have to (after pressing the start button in the bluetooth settings) re-pair the devices. I'm also always deleting an existing partnership with the PC but I'm not sure wether this is neccessary or not. This procedure ist very annoying when you often switch between PCs. I was told that the Freeware PocketMultiPartnershipSync helps for that but it didn't quite work for me.
What is concerning using the GPRS modem over the Magician, I was writing some detailed walkthroughs for that in the forum. You basically need to set up AT strings in your Modem settings to set up the APN of your provider. I also experienced that it sometimes didn't work, maybe due to the installed radio version on my device. I was successful with the Radio 1.13 installed, so try that.
Mudstuffin said:
If you have bluetooth LAN connection doesn't that mean you can also access network shares? I don't think that is possible through active sync...
Just curious
Si
Click to expand...
Click to collapse
The Orange M500 has the Microsoft (M$) Bluetooth stack so making a LAN connection isn't an option for me.
This is what i did:
If you have any COM port used by your other stuffs, I suggest delete them, and change to other port. Basically, Windows mobile use this port as their default:
Incoming Port : COM4
Outgoing Port: COM5
therefore make this on your computer:
Bluetooth Port COM3
Communication Port COM4
Communication Port COM5
and then set your Activesync to detect COM3
Now you can use Activesync + other thing you may need for LAN
futurity said:
Ok, I've finally had time to get the sequence perfected after setting this up about 10 times (most of them failures).
Here is the working procedure, based heavily on the previous posted procedure with some more detailed instructions that worked for me.
PC Bluetooth:
First off you don't need to create a bluetooth lan connection in order to get LAN or Internet access. We're setting up Internet access via the ActiveSync Proxy.
Install your Bluetooth interface into your PC (for me i just plugged in my Bluetooth USB dongle and it installed using XP drivers, but you may need to install specific software).
On your PC task bar (bottom right next to the time) click on the blue Bluetooth icon (called Bluetooth devices on my PC)
Select "COM Ports", then add, then select "Incoming (device initiates the connection)" then OK. This creates an inbound connection that the Magician can use to talk to the ActiveSync Program.
Note the COM port number of the newly created COM port.
PC ActiveSync:
Open ActiveSync
Select File->Connection Settings
Select the "Allow serial cable or infrared connection to this COM port:" and select the port number that you just created.
Magician Bluetooth:
Select Start > Settings > System > Bluetooth settings.
Select the "Inbound COM port:" box.
Then Select the "Outbound COM port:" box. If it asks you to select a device providing a serial interface, click ok,
Then this will take you to Start > Settings > Connections > Bluetooth. but for now close this window by clicking the top right "ok" to close the window. i.e. don't select a new device quite yet.
The Bluetooth settings page should now reappear.
Now press the "Start" button in the middle of the page. Press ok to accept the prompt to select a device providing a serial activesync interface.
Then this will take you to Start > Settings > Connections > Bluetooth again.
Here click on Turn on blueooth, make device discoverable, then tab "Devices", search for a new device (ie your pc), create a bond, set up a passcode (0000 etc), your pc should then show a balloon to say your phone is trying to make a connection and requires a pin. Set that Pin to 0000. Your phone should now bond with the PC.
Magician Active Sync:
Next open up ActiveSync on your PPC, and click Tools menu, Connect via bluetooth.
Hopefully, all being well, you should now connect to your pc via bluetooth.
You should be able to browse the internet, or use MSN Messenger, and if you can do that (if on your PC you've got internet pass thru on your ActiveSync), you can use skype, X-ten Softphone, PocketIRC, etc.
If you have any problems, send me a private message and i'll try and talk you trough it.
Click to expand...
Click to collapse
worked perfectly
Can anyone please help me set up Active Sync via Bluetooth!
I've been trying for days, I've tried both my Atom and the Wizard but I am getting nowhere.
It is different to Windows SE 2003 version (Jam).
Many Thanks!!
I'm assuming you already have bluetooth set up on your pc on one of the Comm ports so...
First, set up a partnership between your unit and the pc, i.e. set bluetooth on both to be discoverable by other devices and on your pda switch on bluetooth in comm manager, select "settings" then "bluetooth settings" select the "Devices" tab then select "new partnership" the two should find each other and you'll enter a code on the pda for the handshake which you then need to enter in turn on the pc.
Open activesync on the pc, select file then connections settings check the "allow connections to one of the following" box, select the bluetooth comm port from the pulldown. On your device then open activesync and select "menu" and "connect via bluetooth", from there it should connect.
Sounds easy but I find it works about as well as the Activesync 4.1 on USB, so erratically....
Should also mention that your initial connection cannot be via BT. You have to do it via USB first.
My home computer is an older version of media center. I'm not sure if that has anything to do with the problem I'm having, but every time I hook up my phone through usb, my computer resets itself. No errors, no warnings, it just powers down and restarts. The phone works fine on every other computer I've tried (all were xp) and usb on my computer works fine with everything else I've tried it on (keyboard, mouse, hard drive, bt dongle). I've been trying to get it syncing over bt with no luck, I guess because I can't do it through usb first. Any ideas of what I could do?
Make sure when you make the initial partnership youve searched for the phone from the PC, then once you enter the passkey on the phone you can check the Activesync Service box. You cant do this if you find the PC from phone, it doesnt come up. once i did this, it was easy then. make a bluetooth com port on the pc and in activesync allow connections on that port.
Port doesn't appear
I can set up a pairing between my PC and the Wizard, but I never see the com port in the list in Activesync.
Doh! :x
Re: Port doesn't appear
davebo said:
I can set up a pairing between my PC and the Wizard, but I never see the com port in the list in Activesync.
Doh! :x
Click to expand...
Click to collapse
you should the same comm port which shows in the bt configuration as "bt serial port" it's always shown with me as com4 (maybe it's deferent with you), but you have to choose the same port, otherwise it will not connect.
if the comm port does not show in the activesync list, then you should add a new incoming port through the bt configuration, and it will show the port # in the activesync list.
try that, it should work for you.
Hi all,
I have a toshiba portege r200 and I'm simply not able to set up ActiveSync to work through bluetooth. The darn computer only sees my phone as a modem.
I have no clue how to do this.
I really cant' see why this has to be so hard. Both units are running stupid microsoft software. Whey the can't microsoft think that people migh want to connect their ppc's to their laptops via bt and just make it work easily?
Please, someone help.
thanks
zsizsi said:
Hi all,
I have a toshiba portege r200 and I'm simply not able to set up ActiveSync to work through bluetooth. The darn computer only sees my phone as a modem.
I have no clue how to do this.
I really cant' see why this has to be so hard. Both units are running stupid microsoft software. Whey the can't microsoft think that people migh want to connect their ppc's to their laptops via bt and just make it work easily?
Please, someone help.
thanks
Click to expand...
Click to collapse
I agree 100% that this should be easier. But I think ActiveSync is actually a service that the laptop offers, not the phone. So on the phone, go to your BT manager, select your laptop, and then select services. ActiveSync should be one of the choices. After that, you should be able to connect to ActiveSync via BT, but I think you need to initiate the connection from your phone.
Activesync via Bluetooth
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
thank you all for your input.
i tried everything you guys suggested and it's still not working. my comp only offers a serial connection. is that ok? it has this toshiba bluetooth software on it not the original windows kind.
when i choose connect via bluetooth on my ppc's activesync it sais there's no computer that supports bt.
any ideas?
thanks again
I have Toshiba Bluetooth control software as well. I am certain it's the incorrect or incomplete BT COM port setting on your PC. A few findings (on my notebook) to share, hope this helps.
1. I have a "Bluetooth Local COM" applet on Control Panel
2. By opening "Bluetooth Local COM" applet I have a list of PORTS
3. The CORRECT port I HAVE TO use IS
"COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
NOT
"COM6 Toshiba BT Port (COM6) LocalCOM-Client"
4. If you don't find the Server COM port, do "create a Bluetooth virtual COM port for a Server"
5. Of course enable by checking the "Connection Settings" "allows connections to one of the following COM#" (7 in my case)
After this, try the steps I suggested. Initiate BT Activesyn from your PDA phone.
Good luck.
Hi,
Thanks for all your effort.
I did what you said and it's still not working.
When I'm trying to connect from my phone via bluetooth it satill sais it cannot find existing blueooth partnership with a pc that supports activesync.
what am i doing wrong?
Thanks
IceGoal said:
I have Toshiba Bluetooth control software as well. I am certain it's the incorrect or incomplete BT COM port setting on your PC. A few findings (on my notebook) to share, hope this helps.
1. I have a "Bluetooth Local COM" applet on Control Panel
2. By opening "Bluetooth Local COM" applet I have a list of PORTS
3. The CORRECT port I HAVE TO use IS
"COM7 Toshiba BT Port (COM7) LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)]
NOT
"COM6 Toshiba BT Port (COM6) LocalCOM-Client"
4. If you don't find the Server COM port, do "create a Bluetooth virtual COM port for a Server"
5. Of course enable by checking the "Connection Settings" "allows connections to one of the following COM#" (7 in my case)
After this, try the steps I suggested. Initiate BT Activesyn from your PDA phone.
Good luck.
Click to expand...
Click to collapse
Phat!! This works for me with my Acer laptop and Bluetooth connection, thanks man!
Sweet, took a few tries, but works like a charm.
Thanks
Bump
I just wanted to bump this to say thanks for posting the bit about using the LocalCOM-Server[SerialPort(TOSHIBA LOcalCOM)] port instead of the client port. Trying to get AS working using the Toshiba stack was driving me around the bend!
My pleasure
I've learned a lot from this wonderful board from a lot of wonderful people. Glad to be part of it!
You're the MAN
Thanks. This also worked for my Cingualr 8125. Many hours wasted. Glad I found this post. Thanks for your help.
this worked on my cingular 8125 as well, zsizsi i think you may have to delete all partnerships that were previously created with handheld on your pc and handheld. if that dosent work then in bluetooth settings go to options and under general tab check box "PAN networking service" that is just something i did while creating partnership not sure if it helps
The only thing that worked for me after 4 days of messing with it was to do a cold boot.
The first thing I did after the boot was to follow the instructions. Voila! ActiveSync magically appeared.
Hi all,
I have exactly the same problem with my qtek9100 and my IBM T43 Laptop.
I tried many times but....still not working!
As zsizsi if I try to make a relationship via PDA, it asks me the pairing key, and I'm blocked.
If I go through PC, I can do pairing, in the services I flag activesync, I configure the same com port that I have on AS (com 8) and when I0'm in the bluetooth wizard on the PDA, related to the PC I can only see 3 services:
hands free
remote connection
serial port
no activesync service to flag.
If I try then with the PDA Menu>BT connection it aswer that there is no relationship with PC supporting AS!!!!What the hell!
The only thing I see is that in my BT config in the local server the BT wizard creates a serial port named My activesync......
I have tried also your suggestion but.....
tinman44 said:
this worked on my cingular 8125 as well, zsizsi i think you may have to delete all partnerships that were previously created with handheld on your pc and handheld. if that dosent work then in bluetooth settings go to options and under general tab check box "PAN networking service" that is just something i did while creating partnership not sure if it helps
Click to expand...
Click to collapse
thank you soo much for that info...enabling the "PAN networking service" finally allowed me to connect with my toshiba qosmio laptop
If the devices are paired... You have to select a service for the pda BT connection
Only when you manage to select the servive Activesync (a comport has to be valid assingd) then a connectin can be astablished.
In active sync you must assign a com port.
See the manual in activesync BT
Yes, I can guess it.
The rpoblem is that the devices are paired, the activesync service is flagged in the PC (while I do the automatic pairing devices withn a wizard).
But I can't still see the service in my PDA.
I can only find:
Hands free
Serial port
remote connection
No activesync service on the PDA relation wizard...
Any other suggestion?
Another issue.
When I look in my BT services, I can't find an activesync service, but only an icon (com plug) called My activesync.
Look at the properties of this icon I can only flag automatic/manual and Secure/unsecure connection, and there is the window manu to select the com port (that is the same selected in Activesync settings).
Is that correct, or I should find a specific activesync icon (like PIM syncronizing ....)
Blinks....
SKID
Re: Activesync via Bluetooth
IceGoal said:
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
Click to expand...
Click to collapse
FOLLOW THIS STEP BY STEP.... I HAVE DONE IT 3 TIMES FOR MYSELF AND FRIENDS ON DIFFERENT LAPTOPS AND IT WORKED FIRST TIME - EVERYTIME!!!
PS. Delete all existing pairings, relationships, COM ports etc, START FRESH!
THANKS MAN!
Re: Activesync via Bluetooth
IceGoal said:
1. Install Active sync
2. Connect phone to USB cable and computer and let active Sync run once.
3. Disconnect USB cable.
4. On your Computers Bluetooth software (add a com port) before you detect the phone (very important).
5. On Active Sync on Computer click "connection Settings" and make sure it is using your com port from step 4.
6. Turn on discovery on your computer.
7. On your Phone go to Bluetooth / devices / New and select your computer enter pin on phone and PC.
8. Go to Active Sync on your phone and click "Connect via Bluetooth."
Hope this helps.
Click to expand...
Click to collapse
Thanks IceGoal, on my HP laptop it works superb.
But I have to say that those people that work on our mobile network provider company are uncapale, because they said that this is impossible to connect.
Thanks again folks.