Hi everyone.
I've searched the forum for a while but I can't find any mention of this problem, so...
When I'm typing in text (in my Niki, but should apply to all Touch Keyboard-using devices) using non-XT9 mode and the Touch Keyboard, the word I'm typing is automatically selected as I type. This means that when I hit space at the end of the word, the whole word is replaced with a space. Kinda useless, huh.
I've dug through the input options and none of them appear to fix this issue. Why does the phone do this and is there any way to stop it?
I have the same problem while writing on the screen. The solution is typing slower (at least remember to wait a few miliseconds before pressing "space" key). and voilá!
I got fed of it and started typing with the physical keyboard with xt9 on
is there any way to disable the back function on bkspc key in opera ,because sometimes when i try to delete severals letters by pressing the key , opera goes back ,and that is really annoying when entering text.
There also seems to be a problem with Sym and au keys as well. is this on my device only or to everyone? i must mention that i use standard opera from GenericUK ROM. i also have macromedia flash uninstalled.
it seems that after uninstalling some extra kybds like Diamond keyboard and NullKybd the back problem doesn't appear anymore. but not being able to use phone's sym and au key when entering text(it seems to work in adress/search bar) is hard ,because it's impossible to enter some symbols like"underscore" when typing.
I too have this problem.
I used to used Opera in favor of Internet Explorer and this backspace key working as a back key is giving me a hard time.
Any solutions to it? (Other than removing keyboards)
i feel like a total idiot...
today i somehow crashed my software keyboard by installing some application to change the keyboards style.
the effect was indeed noticeable. the keyboard is gone.
when i for example want to write a new sms the screen does not change until i press on the space where the keyboard button normaly would be. tapping the keyboard space again seems to pop up an invisible keyboard but whereever i tap nothing happens.
would not be so bad, i still have the hardware keyboard or atleast i thought so, but the buttons are reassigned. the normal "." (dot) does not work at all and the "cap/shift" button opens the messages-screen.
of course i uninstalled the app but that did not help. i also tried to install another programm (pcm keyboard) hoping it would give me atleast some kind of keyboard.
but everything stays as it is.
is there any solution to this? something like reseting the keyboard? or is my only chance to hard-reset? (already tried soft-reset)
thx
fleity
EDIT: problem solved
after very much googlen and trying various things i think simply deleting all registry entrys the app created did the job
Whenever a sms is open, the touch screen keyboard that is opened is supposed to be full qwerty. However, mine has turned in a number keypad. There is no way i can change to full qwerty again. I can change into transcriber, block recognizer, letter recongnizer but cannot revert back into qwerty. How can this be?
Even a soft-reset cannot solve this. Can anyone help? Thanks
If I tap the "Up" arrow next to the SIP "Show/Hide" icon I get a popup menu that offers ...
Touch Input Settings
English >
Phone Keypad (this will be what you have selected)
Full QWERTY (this is what you want)
Keyboard
Other Input Methods >
Ta
Dave
Did you turn on the T9 option with HD Tweak? This caused the same problem on the Touch HD, might be the same on the TP2.....just an idea....
DaveShaw said:
If I tap the "Up" arrow next to the SIP "Show/Hide" icon I get a popup menu that offers ...
Touch Input Settings
English >
Phone Keypad (this will be what you have selected)
Full QWERTY (this is what you want)
Keyboard
Other Input Methods >
Ta
Dave
Click to expand...
Click to collapse
Er Dave.... thanks for the suggestion. I already know how to change different input options from arrow up key. Sorry I didnt make myself clear earlier.
The problem is that even when I choose qwerty.... the number keypad still appears. It has happened before and the only way I can go back to qwerty is to go back to previous backup setting.
I'm just wondering if anyone else has faced any problem like this.
michi123 said:
Did you turn on the T9 option with HD Tweak? This caused the same problem on the Touch HD, might be the same on the TP2.....just an idea....
Click to expand...
Click to collapse
Hi michi, I never use HD tweak and T9 option before. Only use qwerty and hardware keyboard only. This number keypad just appeared out of nowhere.
st8800 said:
Er Dave.... thanks for the suggestion. I already know how to change different input options from arrow up key. Sorry I didnt make myself clear earlier.
The problem is that even when I choose qwerty.... the number keypad still appears. It has happened before and the only way I can go back to qwerty is to go back to previous backup setting.
I'm just wondering if anyone else has faced any problem like this.
Click to expand...
Click to collapse
Oh well, worth a shot...
Try the other guys suggestions
Dave
See... funny thing is that 5hrs ago, I backed up the device. During this time, I did not install any software and hardly used the phone except for some sms and inputing new contact info. Suddenly, the qwerty keypad input doesn't appear any more.
I just restored my backup and the qwerty keypad is up again. Hope someone knows what is going on, if not, I have to backup everyday!!!
It happened to me too. I changed the registry so I could map keyboard keys to emulators, changing the eT9 IME to the windows mobile default. Perhaps you have done this? If so, change the values back and it fixes the problem after a soft reset.
I think the registry location was HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts
Layout Text should be "eT9 IME",
Ime File should be "\windows\eT9ime.dll"
I have same problem
I give up on the keyboard for now. Not sure what broke it and I didn't backup everyday. Registry looks a bit different for me.
I did this previously at it work very well.
---------------------------------
Originally Posted by beemerTPPC
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
------------------------------
Today it happened again.... lucky I backup last night. 1 hour ago everything was still working. Again.... no new software or settings changed. What could be the problem?
I checked the settings are still the same.... now even suggested words don't appear.
Sigh... until a solution can be found... I just have to keep doing backup / restore....
mikeinashed said:
It happened to me too. I changed the registry so I could map keyboard keys to emulators, changing the eT9 IME to the windows mobile default. Perhaps you have done this? If so, change the values back and it fixes the problem after a soft reset.
I think the registry location was HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts
Layout Text should be "eT9 IME",
Ime File should be "\windows\eT9ime.dll"
Click to expand...
Click to collapse
I cant choose eT9ime.dll because I really like the suggested words to appear.
This works form every time
Just change
HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
cjatcti said:
Just change
HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Click to expand...
Click to collapse
Hmm... strange my CurrentET9Style was set at 8. What does this change do?
thanks. I had the same problem on my HTC Fuze.
This helped: HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
but I have a different problem. (had this before the reg edit)
my problem is: If I write hello it'll automaically become hellHello... and if I write it it'll become iIt.. I switched off capitalization but tht didn;t help!!
Worked!!
This reg change did it for me cheers!!!!
cjatcti said:
Just change
HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Click to expand...
Click to collapse
I just started having this same problem today. I tried cjatcti remedy, and it worked so far . QWERTY keyboard is back to normal. If the phone keyboard comes back, I'll let you all know.
Excellent work. Worked very well so now I have the word selection and the keyboard I like. THANKS
Wish
I would have seen this thread before I hard reset.
Changing the CurrentET9Style from 1 back to 0 works ... but once I go into, say edit a contact, then the number pad will re-appear again. The registry key is modified back to 1 again ... any quick trick to stop this? really don't want to change the key again and again...
I use my Kaiser with the ROM PDA Corner Ultimate X-v9 a six months ago without any problem. Today i saw the first page of the forum the application SMSer from "oldsap". I found interesting and tried to install. Soon after the installation I was testing it and realized that I had the same problem as everyone here. Changing CurrentET9Style from 1 back to 0 solved my problem. I think in my case the problem appeared after the installation of SMSer, so i uninstaled and my QWERTY is working normal now.
I have a Diamond with BsB6.5Q ROM.
Hi there, don't know if this is a ROM issue or a WM6.5 issue. I use the Compact QWERTY that is supplied in this ROM - I prefer to use the "phone keypad" style of keyboard. As I do 95% of my texts in the native Welsh language, I keep T9 switched off (there is no such feature in Welsh). However, when I write a text message in Welsh sometimes the spacebar won't work - it simply won't let me put a space there - I have to press 'enter' then 'backspace' to remove the restriction. This is not a screen sensitivity issue, because the 'shadow' appears above the spacebar to signify that it has been pressed. This problem doesn't arise when writing English texts, so I'm assuming that the problem occurs because the phone is trying to be clever and trying to predict that there shouldn't be a space after a certain letter.
I've looked through the settings and I can't find anything to switch this off. Any ideas?
Also, when writing, I would really like to be able to move the cursor backwards and forwards through the text, say if I want to correct an earlier error. Having to press the desired location with my finger is not good enough, because I need three or four attempts to get it right due to being the owner of a large thumb. I was then thinking about the Diamond's scroll wheel - this would be ideal for the job. Is there any way use that to scroll, i.e. anti-clockwise to move cursor to the left, clockwise to move right?
Thanks
Right, please ignore my last paragraph above - I completely forgot about the up/down/left/right buttons around the scroll wheel. The Left/Right buttons do exactly what I want.
Now, all I want is a fix for my keyboard problem (1st paragraph). It only happens for some words, and when it happens I cannot type any of the punctuation characters - I can only continue typing letters. Also when this happens the word (or most of it) is underlined. I don't understand why the word that's currently being typed would need to be underlined. It seems like parts of T9 is still on, even in ABC mode.
Any ideas?