Wifi & Radio - Confirmed BUG ? - JASJAR, XDA Exec, MDA Pro General

Hello Everybody,
attending to a big show, my Qtek9000 have suffered a wireless "bombing" situation: any usage of wifi (sometimes also wth bluetooth) was followed from a strange "power off" effect after few minutes of work, followed from difficult to power on again. The same situation occour with wifi and bluetooth enabled. The wifi networks present in the stands area was more than 32 (scanning with a laptop).
The rom version is the last official (1.30.89 ITA)
Any ideas ??
brunom

Is your battery dead perhaps?

Save yourself some hassle and time, and just order your new battery today. You actual one will go worst during next month before dying at 78%. It's hard to stand, believe me. Better unplug the cord when you still see her as beautifull as before

thank you guys ...
I will try changing the battery. I will verify also the actual battery, that is charged every night .... (the prbl occours with the battery again at 80 / 78 % ?!?!) ....
brunom

As I said, your battery is dead. You can charge it as much as you want, it will quickly die. Just buy a new batterie, there is nothing you can do. Most universal battery dies after 10 month.

But you can also use the occasion to buy a brand new 3100 Mh battery for 30 euros and discover a new life (and a new size)

Related

My battery drians really fast please help is this normal

I just bought a T-moble USA version MDA. I love this thing but my battery is draining very fast. For example I charged it over night last night after it was dead and this morning after only making a few calls with my bluetooth I was down 10% in about 15 minutes. It used all the battery yesterday in about 7 hours. I would say I use this thing less then the average user. I have a sd card in it all the time would that make this drain fast. My wifi and blue tooth is off most of the time.
Thanks for any help offered.
Garth
I have found the battery meter not totally accurate for example it may show 85% and then I reboot the device it may show 100% - so be wary of that and make sure you are truly starting from 100%. Bluetooth enabled calls will use a fair amount of juice but poss not as high as 10% in 15 minutes . On low to average use you should be getting about two days use but if you been checking out all the features and playing with you're new toy then 5-10 hours about right.
Make sure that you have all power saving settings enabled found under settings and that the device goes into standby when not in use. hope that helps
get a new?
I bought my Qtek 9100 and hade the same problem... i took it back to the store.. they took the phone and replaced it with a new one and this new one havent been like that.. so i guess that you have goten a "monday morning phone" so try to get your phone replace i did and now the battery remains powerfull atlast 3 days
Thanks for the info I'm going to keep it for a couple of day and if it keeps draining the battery I will swap it for another.

MDA Pro - Phone/Radio cutout at 70% battery

First off, I have seen many threads on the MDA PRO (and all its variants) cutting out at high battery power levels and from what I can see there doesn't seem to be any concrete resolution. But here is my situation.
I bought a new sealed MDA Pro and immedialy flasshed to the latest T-Mobile rom. Thats where the problems began. I seem to be plagued by the MDA cutoff at 60-70% problem.
The way it manifests is the radion loses signal and cannot locate the carrier at or below 70%. At this stage a reset of the device and it reboots but as soon as you use the phone or wifi it crashes .. black screen.
As with others if I connect the USB cable and charge by PC or mains everything returns to normal. Not a very mobile solution!!
I have tried every variant of ROM out there and the problem remains. I have charged the battery for 16 hours etc etc. I have tried phone in Auto, GSM modes .. same problem :!:
The only thing I haven't done yet is buy a new battery and hence my post.
Will the purchase of a new battery solve the problem? As with other threads it would seem this came along with the latest roms. Does flashing a ROM when the battery is less than fully charged cause problems?
On a final note, if after the radio loses signal it is turned off I have been able to run the device down to 20% running videos and MP3. Is this a probem with radio levels above1.09.00 (Just thinking out loud)
HELP: This device is perfect for my daily use and having purchased a less than mobile device I am now close to getting rid .. but I dont want to
Any advice greatly appreciated... expecially from those who have fixed the problem.
I had this problem and a new battery fixed it.
Thanks. Look slike a new battery
There seems to be different speculations on what causes the battery problem on the Universal: the power charge cable quality theory, one idea about the battery level stored inside the batter which some claimed to registry heck could change and another idea about the battery 500 charges limitations.
But if yours is brand new, then none of the above applies... So the refresh to a new Rom definately must have something to do with it. Wonder anybody who had bought a new replacement battery after the power drop had done another rom refresh and whether the same problem returns?
I have just bought a replacement battery (1800m Ah at standard size by MoMax which gives me another 30% more power everyday which is something good I got from paying for a new battery) yesterday to change the old one out for the same reason. Looks like until someone found the real cause, I am keeping the old one for my next rom refresh...
New Battery ... problem resolved.

Help - Battery Drain excessive

*jump to ashtricks for immediate problems without reading software/ROM changes.
I know this is going to be made especially difficult with all the different software/combo's that can be loaded, but I have to post this up and see if any one else has seen this and if it might be hardware or software.
I have a HERMS 100 (8525). I first got the phone in April with WM5 (don't know which build they might have been on then) and which ever Radio was coming on them then. My battery would usually last 2 days with my avg use.
This has been the case threw upgrades until the last 2-3 months. I upgraded From one version of WM6 to VP3G's 2.X build of WM6 and I upgraded the radio to which ever version was the newest at that time (maybe 1.47 or 1.50). I Noticed a sudden drop in battery life, but the phone pretty much always made it a full day even with high use, so I didn't think much of it. I did notice about this time that sometimes the phone would alarm me and say it had 20% battery remaining, but if I rebooted the phone it would say 80 or 90% power remaining when it came back on and work fine the rest of the day.
The following has been over the last month. I upgraded to VP3G's 3.0 and again later to 3.6 and again to 3.62. I noticed the battery continued to degrade throughout this time. So I upgraded the radio to 1.54. The battery continued to go down hill at an even rate, but I noticed something else, the battery would not take very long to charge, but was dying faster and faster.
Well I started tracking and experimenting. Starting last week (no change in software or ROM's for the last 2 or 3 weeks) the battery would rarely make it through the day even when the phone was not in use any during the day (Granted I get no cell service at my desk at work, but I never have even back when the phone would last 2 days searching for signal). Most days last week it wouldn't make it 5 hours from being unplugged even when the phone wasn't in use. I decided to run the battery all the way down to where it wouldn't even turn the phone on anymore as I had heard sometimes you needed to do that after a rom upgrade. It did not help, but I noticed that the phone said the battery was fully charged within 2 hours from being completely dead.
*
Today was the worst, I unplugged it after being plugged in all night. Unplugged it at 6:45am. I did not use the phone, it just stayed in standby (I hadn't even taken it out of standby any today. I am at work with no service (When I say no service, I don't mean sometimes it finds something, I mean no cell service from any carrier makes it past 10 feet of the front doors entering the building and I am about 150 feet from the closest wall to the outside). I grab the phone at around 10:30am to check on a meeting notice, clicked on the phone to wake up and the battery alarm alerted and the battery said I only had 20% power remaining. In 5 minutes of doing what I was doing the battery had gone down to 10% remaining (so the phone went from lost 90% of it's power, never being used in less then 4 hours). I went back to my desk, plugged the phone back in and within an hour I noticed the amber light on the front that I relate it to telling me it's charging had turned green, I unplugged it and checked it and the battery said it was full 100%. Could the battery really charge that fast?
*
I know this would be easier if I could remember what radio and what version of WM5 came on this phone and loaded it back on and I am in the middle of downgrading the radio since I had ran WM6 with no battery issues separate from WM5 until I did that one upgrade with the radio. I guess I am curious if this could be a hardware (phone or battery) where it's not charging fully or if this seems to be a software issue.
I know all the factors that can be involved make this hard, but thanks for any responses you guys can give.
ok, how about this one, Is my battery screwed? I notice while I am using the phone the battery gets really hot. Today it did the same thing of all of a sudden saying I had 10% power after only using it for 5 mintues, rebooted the phone and now I am back to 70%.
Hi,
There's a lot on here about this problem. Have you read the wiki?
Some solutions you might try:
- turn wifi off.
- turn off all beams
- put in the fake server trick.
- search to see if you have any software that continuously polls the battery or is seeking an exchange server
- ensure all your apps fully close rather than minimise
- invest in a new battery.
WB
Thanks, I have gone through the wiki Continuasly since I got the phone in April, but with all the stuff out there, I could have easily missed something.
- turn wifi off - Never turn it on
- turn off all beams - Beaming disabled
- put in the fake server trick - Have to research that one
- search to see if you have any software that continuously polls the battery or is seeking an exchange server - have to check, don't have exchange server setup. I do have it checking emails every 15 minutes, but I never had any issues with that setting and the battery lasting a couple of days
- ensure all your apps fully close rather than minimise - X button set to close not minimize and I often check it to see whats running.
- invest in a new battery. - Will be doing that next. Just waiting to see what case I might get for Christmas.
Thanks again, I will research those other items.
I had a similar problem where the stock battery would only ever last for ~7-8 hours - even on standby. I got an extended life 3000mAh battery and that managed to last for about 14 hours.
I had a talk to HTC and they agreed to warranty claim it. I'm still waiting for it back... It was sent back to them on 14/11, and I'm still waiting.
Stop your device checking for emails for a few days and ses what happens. Definitely install the fake server trick. Activesync continuosly trying to do its dirty work can be a pain in the arsenal, at times.
Let us know how you get on.
WB
wacky.banana said:
Stop your device checking for emails for a few days and ses what happens. Definitely install the fake server trick. Activesync continuosly trying to do its dirty work can be a pain in the arsenal, at times.
Let us know how you get on.
WB
Click to expand...
Click to collapse
Well I turned off email checks last night and disabled the radio this morning so it wouldn't search for signal when coming to work and set the phone on my desk. I never used it this morning, just had it sitting on my desk in standby, until about 4 hours after I took it off the charger and the phone buzzed me and when I checked the phone the battery said 0% remaining and the phone cut off a few seconds later (now I am sure if I would have turned it back on the battery would say something like 70%, but I didn't do that this time). I left the phone off and plugged it into the computer to charge, the LED on the front come on amber for about 20 minutes then went to green. I turned the phone on and it says 100%. I don't see how the battery went from 0 to 100 in a matter of 20 minutes.
I did a lot of searching the last couple of days and phone issues from email to bad manufactured batteries (which I happen to have the brand someone suggested as a bad one), I also saw people pointing out do the fake server trick, yet I can't find a single time where anyone said what the trick is or how to do it. Not even in the WIKI where the trick was mentioned as a possible fix (or google for that matter, just the same words first posted in a thread here about it).
So, how do you do this server trick?
I plan to get a new battery after Christmas at any rate.
Check this thread:
http://forum.xda-developers.com/showthread.php?t=338421&highlight=fake+server+trick
I was having the same battery drain problem (less than 8 hrs on a full charge), I did the fake server and turned off auto day light saving time checking the clock settings, I now get 12 - 15 hrs on a full charge.
I'm running vp3G's 3.62.3 AT&T ROM with radio 1.54.07.00
Thanks! I was just finishing flashing a new ROM when I saw this. I did the fake server trick, but this rom doesn't have the Dya Light Savings time option where the instructions say it should be. Maybe that's all removed by this rom. TIme will tell.
Thanks again.
@ Firehawkns
hey buddy!!
I am using a JasJam for the last 2 months. i dont know if my reply is useful to you or not. As far as battery life is concerned am impressed with mine. Am using TNT's latest ROM and my radio version is 1.54.07.00. I use my phone all day with couple of calls that last about 2-3 min each. But every night I get calls from my gf, to whom I talk for 3 hours straight(mostly starting from 11pm to 2 am) and every day I put my phone to charge after I finish the call. So after finishing the call I still have 50% of battery. Moreover our call starts right after I leave work at 11pm so by the time I reach home which is around 11.30pm my phone connects to wifi too. So all the time am on the call as well as an active wifi connection.
So as per my experience the battery life is cool. So try TNT ROM!!!
Interestingly enough, now I've got my phone back from the warranty claim, it's only drawing 81mA with backlight on, no wifi or BT. Before sending it back, it was drawing ~180mA with backlight on, no wifi or BT.
This will just about double the battery life that I get in theory...
Install BatteryStatus on your device and see what it tells you.
That is a cool program.
First off I really hope it isn't the phone, for one it's my third one from Cingular since the first two died within 2 weeks (back in may), second it's got one big gash down the corner where it came out of the holder and hit the road one day. I think that would be just enough reason for them to not do anything with it.
Anyway, I am going to replace the battery because I can't figure out why the phone is doing things like saying it has 20% batt remaing, then I reboot and it goes to 70%. I am hoping this is a battery issue. So far the phone has been unplugged for a tad less then one hour, has not been used and the battery meter is on 90%.
Battery Status is a kick butt program and I plan to do some searching today to see if people have benchmarked there ratings/draw. I notice mine jumps randomly. With wifi, BT, all programs all terminated, backlight on the lowest it will go and radio has one bar 3g sometimes, two bars Edge sometimes, but didn't change during watching this list below, but the MA does this every 5 second refresh:
111--190----125-----109----250----210-----140----135----226---111---etc.
I am currently running a barebones fresh flash WM6 rom with nothing installed except Cingulars media net/ISP settings, radio is 1.47.10. Going to try 1.50 today I think.
I turned the radio off just now and the MA went down (expected) to 84 and is jumping between that and 104. The battery has dropped to 80% since I listed 90 above. The phone has now been unplugged for right at an hour. Also it might be interesting to note that the little battery percent/bar icon on the "Battery Status" software once in a while will display -1% like it is right now, the phones battery display says 80% and when I tap the battery icon on battery status it jumps to 80%.
Anyway, I am just listing points since this thread is here, I know I need to replace the battery first before any additional insight can be brought forward.
Thanks everyone.
Hmm.. On my Schaps 4.22full, radio 1.54.00 on good reception (on Finnish network) I get around 30 mA with GSM and 3G when idling(no wifi, no bluetooth, no beam, backlight around halfway). With airplane mode on I get around 28 mA. Tried with backlight dimmest and the drain was 15mA on GSM network.
Usually I put the 3G off so the battery would last longer.
The phone takes more power when searching the network so it would be a good idea trying to switch the phone part off at your office.
Well, looks like it was indeed the battery. Over the last week the phone would randomly shut off (about 4 times a day), the battery would be at 10% within 4 hours even if the phone hadn't been used, and while using the phone you could almost watch the battery go from 90% to 30% within a 5 minute talk time, reboot the phone and it would be back at 80%.
Put in the new battery yesterday after charging over night and the phone not only didn't shut off at any point, but I had 60% power remaining by the end of the day (with some data and voice use).
The old battery was a Dynapack from China, that I had read on here is prone to defects.
Thanks for the help everyone, wish I would have gotten a new batt sooner.

Universal==worst Made,now New Problem

hello guys,i recently bought a used o2 exec with 2 batteries(one extra old used battery) and pretty much disappointed with it,coz its almost like a dead one,its always turning off even when its fully charged,it stays for max 4-5 mins of work and tends to turnoff suddenly(the image is fading slowly and blackens up ending).then only remedy is to plugin charger in order to start it again.i had tried both batteries,but same problem occurs again.....now in the forum there are various methods for recaliberating battery.
1st) method says recalibration using bootloader mode drain method-it doesnt works as even in bootloader mode my exec turns off automatically even if battery % is much higher(60%,50% etc).
2nd)recalibration using plastic tape covering on one of the battery points in order to drain battery==same automatically turns off even when 70-80% battery left
now what i just want from you guys is a simple answer to my question-should i consider my exec as a brick & stop using it
or
take 1 more chance & buy a new battery.& try it on my device,i think this may not be a battery problem as battery calibration is also not workin,may be its a device hardware problem......
a batt can be defect and not being seen as such by % or fixed by calib
one of the biggests issues with laptops, phones and..... today imho is
that batts are crap
the % is never correct the usage is never linaer
and a defect batt can be seen as working ,,,,,
buy a real battery, they are more then the ebay ones but are worth every penny i have a bad batt right now as well i cant get more then 8ish hours sometimes less, but i bought from one of the better batt companies which was more money but lasted 2+ days and i will do so for my UNI i love this device

Blackstone Battery Problem %%%

Hello guys i havae some problem with my Blackstone i use it from 2.5 years and i never had problem like this so..
Now when i recharging my device always stay on same % for example even for 1 hour its show always 20% or 50% or anything depends when i put it on the charger..
After restart can show 100% full or anything.. so i found out that the indicator absolutly do not work so if i restart it and show me the real % for example 50% the device always will show 50% battery untill the battery is fully discharged..
And right now i dont know how much Batterry i have and when will need to recharge..
I don`t know but i think this is a battery problem? i use this battery from the begining i mean from more than 2.5 years and maybe is time to change it?! but this heppand when i drop my device once on the floor so do thee is posible by droping the device some senzor to be broken or this is not posible i mean its a battery problem and i will need to buy new one?! or give me some idea how to test this and fix it.
Now no matter that the indicator do not work i still can use my device 1-2 days with one charge even if always show 20% this mean that in the battery itself have power for 2 days conversation internet and etc.. but just do not shown right.
Do anyone of you had the same problem ? and how do you fix it?
Also im looking to buy battery from ebay and i found today this :
http://cgi.ebay.co.uk/HTC-TOUCH-HD-...ultDomain_3&hash=item4aa9446824#ht_3230wt_905
What you think about this battery ? or can someone who already bought battery from ebay point me to get some good one
I read in the Diamond forum that peoples expirience the same problem with the indicator and even after Hard Reset or flashing new ROM the problem is still there.. so if this is right then i dont have reason to Flash again my device if the problem will be still here.
Any Suggestions?
Thanks
I did some tests... so i fully discharge the battery and i saw that even when the battery was on 0% and always the Warning appear i was able to play with the the Device with Wi Fi ON and Games and Music around 45 minutes wow.. this mean that the battery somehow was not calibratet and when its shows 0% in her still have around 30 40 % so after fully discharge the battery till the device Turn OFF by itself then few times turn it ON till there is not enought power even the WinMo to Startup i put it while OFF on the Charger and i was able to recharg to 100% and the light become green this mean the senzor itself work maybe just the battery need calibration again.
Now will see do the indicator work corectly after few more recharges and will write here for peoples who have the same problems in the future
...
hi dude, i think you should simply buy a new battery, but preferably an official htc battery - rather than the unofficial gold one you have posted a link to on ebay.
if you do decide to buy a new battery then put the new battery into your blackstone and charge while device is turned off.
this should fix your problem
Rn
raving_nanza said:
hi dude, i think you should simply buy a new battery, but preferably an official htc battery - rather than the unofficial gold one you have posted a link to on ebay.
if you do decide to buy a new battery then put the new battery into your blackstone and charge while device is turned off.
this should fix your problem
Rn
Click to expand...
Click to collapse
Actually i think its not Battery die problem because i did some test and i see improvment my battery last at least 2-3 days with alot of usage wifi and etc so this is more than normal.. the problem was that the indicator do not work corectly and like i wrote above i discharge fully the battery till the device die and i saw that when my battery was on 0% i still play alot alot my device to swtich off this mean that befor when the indicator shows 0% its remain anorhter 30 40% power this heppand due to 2.5 years usage and i recharge the device when i have time not always when is fully without power and i think that this cause somehow a discalibration of the Li Ion so today when i did the trick i see improvments and now the indicator start to count ever single % so i think when i do this one or two more times the Battery will be calibratet and will show very corect how much Power i still have.
I think this way because if this battery was already died the device will not last 2-3 days with super usage.

Categories

Resources